Skip to contentSkip to conversation

add support for sending RFC8335 PROBE

PATCH In review Andreas Roeseler 2 participants 8 messages Nov 18, 2020 – Nov 20, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v4 cover add support for sending RFC8335 PROBE

The popular utility ping has several severe limitations such as the inability to query specific interfaces on a node and requiring bidirectional connectivity between the probing and the probed interfaces. RFC8335 attempts to solve these limitations by creating the new utility PROBE which is a specialized ICMP message that makes use of the ICMP Extension Structure outlined in RFC4884.

This patchset adds definitions for the ICMP Extended Echo Request and Reply (PROBE) types for both IPv4 and IPv6. It also expands the list of supported ICMP messages to accommodate PROBEs.

Changes since v1:
- Switch to correct base tree

Changes since v2:
- Switch to net-next tree 67c70b5eb2bf7d0496fcb62d308dc3096bc11553

Changes since v3:
- Reorder patches to add defines first

Andreas Roeseler (3):
icmp: define PROBE message types
ICMPv6: define PROBE message types
net: add support for sending RFC8335 PROBE

 include/uapi/linux/icmp.h   | 3 +++
 include/uapi/linux/icmpv6.h | 6 ++++++
 net/ipv4/ping.c             | 4 +++-
 3 files changed, 12 insertions(+), 1 deletion(-)
Signature · 1 line
2.29.2
#1 lore raw

PATCH v4 1/3 icmp: define PROBE message types

The types of ICMP Extended Echo Request and ICMP Extended Echo Reply are defined in sections 2 and 3 of RFC8335.

---
Changes since v1:
- Switch to correct base tree

Changes since v2:
- Switch to net-next tree 67c70b5eb2bf7d0496fcb62d308dc3096bc11553

Changes since v3:
- Reorder patches to add defines first

---
 include/uapi/linux/icmp.h | 3 +++
 1 file changed, 3 insertions(+)
include/uapi/linux/icmp.h +3 -0
index fb169a50895e..1a84450f667f 100644
@@ -66,6 +66,9 @@
 #define ICMP_EXC_TTL		0	/* TTL count exceeded		*/
 #define ICMP_EXC_FRAGTIME	1	/* Fragment Reass time exceeded	*/
 
+/* Codes for EXT_ECHO (Probe) */
+#define ICMP_EXT_ECHO		42
+#define ICMP_EXT_ECHOREPLY	43
 
 struct icmphdr {
   __u8		type;
Signature · 1 line
2.29.2
#2 lore raw

PATCH v4 2/3 ICMPv6: define PROBE message types

In reply to Andreas Roeseler

The types of ICMPV6 Extended Echo Request and ICMPV6 Extended Echo Reply are defined in sections 2 and 3 of RFC8335.

---
Changes since v1:
- Switch to correct base tree

Changes since v2:
- Switch to net-next tree 67c70b5eb2bf7d0496fcb62d308dc3096bc11553

Changes since v3:
- Reorder patches to add defines first

---
 include/uapi/linux/icmpv6.h | 6 ++++++
 1 file changed, 6 insertions(+)
include/uapi/linux/icmpv6.h +6 -0
index 0564fd7ccde4..54dbafdedca1 100644
@@ -140,6 +140,12 @@ struct icmp6hdr {
 #define ICMPV6_UNK_OPTION		2
 #define ICMPV6_HDR_INCOMP		3
 
+/*
+ *	Codes for EXT_ECHO (Probe)
+ */
+#define ICMPV6_EXT_ECHO_REQUEST		160
+#define ICMPV6_EXT_ECHO_REPLY		161
+
 /*
  *	constants for (set|get)sockopt
  */
Signature · 1 line
2.29.2
#3 lore raw

PATCH v4 3/3 net: add support for sending RFC8335 PROBE

In reply to Andreas Roeseler

Modifying the ping_supported function to support probe message types allows the user to send probe requests through the existing framework for sending ping requests.

---
Changes since v1:
- Switch to correct base tree

Changes since v2:
- Switch to net-next tree 67c70b5eb2bf7d0496fcb62d308dc3096bc11553

Changes since v3:
- Reorder patches add defines first

---
 net/ipv4/ping.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
net/ipv4/ping.c +3 -1
index 248856b301c4..39bdcb2bfc92 100644
@@ -453,7 +453,9 @@ EXPORT_SYMBOL_GPL(ping_bind);
 static inline int ping_supported(int family, int type, int code)
 {
 	return (family == AF_INET && type == ICMP_ECHO && code == 0) ||
-	       (family == AF_INET6 && type == ICMPV6_ECHO_REQUEST && code == 0);
+	       (family == AF_INET && type == ICMP_EXT_ECHO && code == 0) ||
+	       (family == AF_INET6 && type == ICMPV6_ECHO_REQUEST && code == 0) ||
+	       (family == AF_INET6 && type == ICMPV6_EXT_ECHO_REQUEST && code == 0);
 }
 
 /*
Signature · 1 line
2.29.2
#4 lore raw
In reply to Andreas Roeseler
Quoted 11 lines · Andreas Roeseler

The popular utility ping has several severe limitations such as the inability to query specific interfaces on a node and requiring bidirectional connectivity between the probing and the probed interfaces. RFC8335 attempts to solve these limitations by creating the new utility PROBE which is a specialized ICMP message that makes use of the ICMP Extension Structure outlined in RFC4884.

This patchset adds definitions for the ICMP Extended Echo Request and Reply (PROBE) types for both IPv4 and IPv6. It also expands the list of supported ICMP messages to accommodate PROBEs.

You are updating the send, but what about the response side?

#5 lore raw
Quoted 8 lines · David Ahern
Quoted 7 lines · Andreas Roeseler

The popular utility ping has several severe limitations such as the inability to query specific interfaces on a node and requiring bidirectional connectivity between the probing and the probed interfaces. RFC8335 attempts to solve these limitations by creating the new utility PROBE which is a specialized ICMP message that makes use of the ICMP Extension Structure outlined in RFC4884.

Quoted 7 lines
Quoted 4 lines

This patchset adds definitions for the ICMP Extended Echo Request and Reply (PROBE) types for both IPv4 and IPv6. It also expands the list of supported ICMP messages to accommodate PROBEs.

You are updating the send, but what about the response side?

you also are not setting 'ICMP Extension Structure'. From:
https://tools.ietf.org/html/rfc8335

o ICMP Extension Structure: The ICMP Extension Structure identifies the probed interface.

Section 7 of [RFC4884] defines the ICMP Extension Structure. As per RFC 4884, the Extension Structure contains exactly one Extension Header followed by one or more objects. When applied to the ICMP Extended Echo Request message, the ICMP Extension Structure MUST contain exactly one instance of the Interface Identification Object (see Section 2.1).

#6 lore raw
Quoted 29 lines · David Ahern
Quoted 11 lines · David Ahern
Quoted 10 lines · Andreas Roeseler

The popular utility ping has several severe limitations such as the
inability to query specific  interfaces on a node and requiring bidirectional connectivity between the probing and the probed interfaces. RFC8335 attempts to solve these limitations by creating the
new utility PROBE which is a specialized ICMP message that makes use of
the ICMP Extension Structure outlined in RFC4884.

Quoted 9 lines
Quoted 6 lines

This patchset adds definitions for the ICMP Extended Echo Request and
Reply (PROBE) types for both IPv4 and IPv6. It also expands the list of
supported ICMP messages to accommodate PROBEs.

You are updating the send, but what about the response side?

you also are not setting 'ICMP Extension Structure'. From:
https://tools.ietf.org/html/rfc8335

   o  ICMP Extension Structure: The ICMP Extension Structure identifies
      the probed interface.

Quoted 8 lines

   Section 7 of [RFC4884] defines the ICMP Extension Structure.  As per
   RFC 4884, the Extension Structure contains exactly one Extension Header followed by one or more objects.  When applied to the ICMP Extended Echo Request message, the ICMP Extension Structure MUST contain exactly one instance of the Interface Identification Object
   (see Section 2.1).

I am currently finishing testing and polishing the response side and hope to be sendding out v1 of the patch in the upcoming few weeks.

As for the 'ICMP Extension Structure', I have been working with the iputils package to add a command to send PROBE messages, and the changes included in this patchset are all that are necessary to be able to send PROBEs using the existing ping framework.

#7 lore raw
Quoted 39 lines · Andreas Roeseler
Quoted 29 lines · David Ahern
Quoted 11 lines · David Ahern
Quoted 10 lines · Andreas Roeseler

The popular utility ping has several severe limitations such as the
inability to query specific  interfaces on a node and requiring bidirectional connectivity between the probing and the probed interfaces. RFC8335 attempts to solve these limitations by creating the
new utility PROBE which is a specialized ICMP message that makes use of
the ICMP Extension Structure outlined in RFC4884.

Quoted 9 lines
Quoted 6 lines

This patchset adds definitions for the ICMP Extended Echo Request and
Reply (PROBE) types for both IPv4 and IPv6. It also expands the list of
supported ICMP messages to accommodate PROBEs.

You are updating the send, but what about the response side?

you also are not setting 'ICMP Extension Structure'. From:
https://tools.ietf.org/html/rfc8335

   o  ICMP Extension Structure: The ICMP Extension Structure identifies
      the probed interface.

Quoted 8 lines

   Section 7 of [RFC4884] defines the ICMP Extension Structure.  As per
   RFC 4884, the Extension Structure contains exactly one Extension Header followed by one or more objects.  When applied to the ICMP Extended Echo Request message, the ICMP Extension Structure MUST contain exactly one instance of the Interface Identification Object
   (see Section 2.1).

Quoted 2 lines

I am currently finishing testing and polishing the response side and hope to be sendding out v1 of the patch in the upcoming few weeks.

send the response side with the request side -- 1 set of patches for the entire feature.

Quoted 6 lines

As for the 'ICMP Extension Structure', I have been working with the iputils package to add a command to send PROBE messages, and the changes included in this patchset are all that are necessary to be able to send PROBEs using the existing ping framework.

right.