: multi+route distort sound
A new RELATIONSHIP has been added to the following issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=579>
======================================================================
Reported By: ramendik
Assigned To:
======================================================================
Project: ALSA - driver Issue ID: 579 Category: CORE - pcm Reproducibility: always Severity: major Priority: normal Status: new Distribution: ASP Linux, RH9-based Kernel Version: 2.6.8.1-ck8 , with alsa 1.0.7rc1 stuck in and patches from bug 505 put on top ====================================================================== Date Submitted: 10-11-2004 20:45 CEST Last Modified: 10-12-2004 13:10 CEST
======================================================================
Summary: multi+route distort sound
Description:
I have Intel ICH5, with both analog and spdif output.
I have made up /etc/asound.conf to route to both hw:0,0 and hw:0,4; I am listening on spdif (hw:0,4). (tiwai: I will try the new patch that may make this redundant, but what we have here seems to be another bug and might happen in other cases too).
Here's my /etc/asound.conf in its entirety:
pcm.analog {
type hw
card 0
device 0
}
pcm.digit {
type hw
card 0
device 4
}
pcm.whole {
type multi
slaves.a.pcm "hw:0,0"
slaves.a.channels 2
slaves.b.pcm "hw:0,4"
slaves.b.channels 2
bindings.0.slave a
bindings.0.channel 0
bindings.1.slave a
bindings.1.channel 1
bindings.2.slave b
bindings.2.channel 0
bindings.3.slave b
bindings.3.channel 1
}pcm.rt {
type route
slave.pcm whole
slave.channels 4
ttable.0.0 1
ttable.1.1 1
ttable.0.2 1
ttable.1.3 1
}pcm.!default {
type copy
slave.pcm rt
}
ctl.!default {
type hw
card 0
}
When I play to hw:0,4 or "analog", the sound is OK. When I play to "rt", it is distorted. Not noisy this time; instead, the pitch is shifted somewhat lower.
Checked with alsaplayer and xmms 1.2.10 . (XMMS 1.2.8 also caused high CPU use when playing to "rt", but this may be a CPU bug). Checked with both 44100 Hz and 48000 Hz files.
This may have something to do with a strange fact. When I play a 48k file, iecset still reports a rate of 44100 Hz. And in fact, if I set it to 48000 Hz manualy and start a 48k file in alsaplayer, it still shifts to 44100 ! This is true for both playing to hw:0,4 and to "rt". (Not tested with XMMS, can test if needed)
======================================================================
Relationships ID Summary
----------------------------------------------------------------------
related to 0000569 Software mixing to rear channel
======================================================================
----------------------------------------------------------------------
tiwai - 10-12-04 13:10
----------------------------------------------------------------------
No clue yet. To make the test consistent, use aplay for testing. Run aplay with -v option. This will show the hw/sw setting. In addition, iecset output and /proc/asound/card0/codec97#0/* files would be helpful as usual.
Issue History
Date Modified Username Field Change
======================================================================
10-11-04 20:45 ramendik New Issue 10-11-04 20:45 ramendik Distribution => ASP Linux, RH9-based 10-11-04 20:45 ramendik Kernel Version => 2.6.8.1-ck8 , with
alsa 1.0.7rc1 stuck in and patches from bug 505 put on top
10-12-04 13:10 tiwai Note Added: 0002091
10-22-04 16:56 perex Relationship added related to 0000569
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl