Skip to contentSkip to conversation

fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORT

PATCH New Patrick Delaunay 3 participants 7 messages Sep 9, 2020 – Jan 27, 2021 1 message not in the archive Arm MediaTek

lore
Share & tools
lore
#0 lore raw

PATCH 1/4 fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORT

Split userdata and boot partition support for eMMC update and correct the description (update is supported).

The new configuration CONFIG_FASTBOOT_MMC_USER_SUPPORT allows to activate support of userdata partition update, based on target name=CONFIG_FASTBOOT_MMC_USER_NAME

This patch also removes the unnecessary dependency with ARCH_MEDIATEK and EFI_PARTITION.

---

 configs/mt8518_ap1_emmc_defconfig |  1 +
 drivers/fastboot/Kconfig          | 22 +++++++++++++++++-----
 drivers/fastboot/fb_mmc.c         |  9 ++++++---
 3 files changed, 24 insertions(+), 8 deletions(-)
configs/mt8518_ap1_emmc_defconfig +1 -0
index b95d2c683a..d5fb0ccd48 100644
@@ -25,6 +25,7 @@ CONFIG_FASTBOOT_BUF_SIZE=0x1E00000
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT=y
+CONFIG_FASTBOOT_MMC_USER_SUPPORT=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_MMC_MTK=y
drivers/fastboot/Kconfig +17 -5
index d4436dfc91..45e07d05e0 100644
@@ -124,14 +124,26 @@ config FASTBOOT_MMC_BOOT1_NAME
 	  defined here.
 	  The default target name for updating EMMC_BOOT1 is "mmc0boot0".
 
+config FASTBOOT_MMC_USER_SUPPORT
+	bool "Enable eMMC userdata partition flash/erase"
+	depends on FASTBOOT_FLASH_MMC
+	help
+	  Define this to enable the support "flash" and "erase" command on
+	  eMMC userdata. The "flash" command only update the MBR and GPT
+	  header when CONFIG_EFI_PARTITION is supported.
+	  The "erase" command erase all the userdata.
+	  This occurs when the specified "partition name" on the
+	  fastboot command line matches the value CONFIG_FASTBOOT_MMC_USER_NAME.
+
 config FASTBOOT_MMC_USER_NAME
-	string "Target name for erasing EMMC_USER"
-	depends on FASTBOOT_FLASH_MMC && EFI_PARTITION && ARCH_MEDIATEK
+	string "Target name for updating EMMC_USER"
+	depends on FASTBOOT_MMC_USER_SUPPORT
 	default "mmc0"
 	help
-	  The fastboot "erase" command supports erasing EMMC_USER. This occurs
-	  when the specified "EMMC_USER name" on the "fastboot erase" commands
-	  match the value defined here.
+	  The fastboot "flash" and "erase" command supports EMMC_USER.
+	  This occurs when the specified "EMMC_USER name" on the
+	  "fastboot flash" and the "fastboot erase" commands match the value
+	  defined here.
 	  The default target name for erasing EMMC_USER is "mmc0".
 
 config FASTBOOT_GPT_NAME
drivers/fastboot/fb_mmc.c +6 -3
index b2f8932e1c..ab6674cac2 100644
@@ -132,7 +132,8 @@ static void write_raw_image(struct blk_desc *dev_desc,
 	fastboot_okay(NULL, response);
 }
 
-#ifdef CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT
+#if defined(CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT) || \
+	defined(CONFIG_FASTBOOT_MMC_USER_SUPPORT)
 static int fb_mmc_erase_mmc_hwpart(struct blk_desc *dev_desc)
 {
 	lbaint_t blks;
@@ -151,7 +152,9 @@ static int fb_mmc_erase_mmc_hwpart(struct blk_desc *dev_desc)
 
 	return 0;
 }
+#endif
 
+#ifdef CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT
 static void fb_mmc_boot1_ops(struct blk_desc *dev_desc, void *buffer,
 			     u32 buff_sz, char *response)
 {
@@ -427,7 +430,7 @@ void fastboot_mmc_flash_write(const char *cmd, void *download_buffer,
 #endif
 
 #if CONFIG_IS_ENABLED(EFI_PARTITION)
-#ifndef CONFIG_FASTBOOT_MMC_USER_NAME
+#ifndef CONFIG_FASTBOOT_MMC_USER_SUPPORT
 	if (strcmp(cmd, CONFIG_FASTBOOT_GPT_NAME) == 0) {
 #else
 	if (strcmp(cmd, CONFIG_FASTBOOT_GPT_NAME) == 0 ||
@@ -551,7 +554,7 @@ void fastboot_mmc_erase(const char *cmd, char *response)
 	}
 #endif
 
-#ifdef CONFIG_FASTBOOT_MMC_USER_NAME
+#ifdef CONFIG_FASTBOOT_MMC_USER_SUPPORT
 	if (strcmp(cmd, CONFIG_FASTBOOT_MMC_USER_NAME) == 0) {
 		/* erase EMMC userdata */
 		if (fb_mmc_erase_mmc_hwpart(dev_desc))
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/4 fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORT

Hi Lukasz,

Quoted 23 lines

From: Patrick DELAUNAY <[email protected]>
Sent: mercredi 9 septembre 2020 15:23
To: u-boot at lists.denx.de
Cc: Patrick DELAUNAY <[email protected]>; Jagan Teki <[email protected]>; Kever Yang <[email protected]>; Mingming lee <[email protected]>; Miquel Raynal <[email protected]>; Peng Fan <[email protected]>; Simon Glass <[email protected]>; U-Boot STM32 <uboot-stm32@st-md- mailman.stormreply.com>
Subject: [PATCH 1/4] fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORT
Importance: High

Split userdata and boot partition support for eMMC update and correct the description (update is supported).

The new configuration CONFIG_FASTBOOT_MMC_USER_SUPPORT allows to activate support of userdata partition update, based on target name=CONFIG_FASTBOOT_MMC_USER_NAME

This patch also removes the unnecessary dependency with ARCH_MEDIATEK and EFI_PARTITION.

Quoted 8 lines

---

 configs/mt8518_ap1_emmc_defconfig |  1 +
 drivers/fastboot/Kconfig          | 22 +++++++++++++++++-----
 drivers/fastboot/fb_mmc.c         |  9 ++++++---
 3 files changed, 24 insertions(+), 8 deletions(-)

Gentle reminder,

Any comments on this serie [1]

[1] http://patchwork.ozlabs.org/project/uboot/list/?series=200509

Patrick

#2 lore raw

PATCH 1/4 fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORT

Hi Patrick,

Quoted 34 lines

Hi Lukasz,

Quoted 23 lines

From: Patrick DELAUNAY <[email protected]>
Sent: mercredi 9 septembre 2020 15:23
To: u-boot at lists.denx.de
Cc: Patrick DELAUNAY <[email protected]>; Jagan Teki <[email protected]>; Kever Yang <[email protected]>; Mingming lee <[email protected]>; Miquel Raynal <[email protected]>; Peng Fan <[email protected]>; Simon Glass <[email protected]>; U-Boot STM32 <uboot-stm32@st-md- mailman.stormreply.com> Subject: [PATCH 1/4] fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORT
Importance: High

Split userdata and boot partition support for eMMC update and correct the description (update is supported).

The new configuration CONFIG_FASTBOOT_MMC_USER_SUPPORT allows to activate support of userdata partition update, based on target name=CONFIG_FASTBOOT_MMC_USER_NAME

This patch also removes the unnecessary dependency with ARCH_MEDIATEK and EFI_PARTITION.

Quoted 8 lines

---

 configs/mt8518_ap1_emmc_defconfig |  1 +
 drivers/fastboot/Kconfig          | 22 +++++++++++++++++-----
 drivers/fastboot/fb_mmc.c         |  9 ++++++---
 3 files changed, 24 insertions(+), 8 deletions(-)
Quoted 7 lines

Gentle reminder,

Any comments on this serie [1]

[1] http://patchwork.ozlabs.org/project/uboot/list/?series=200509

Patrick

Could you rebase this on top of current -master (after I do send the PR) and resend. There are now build / application errors on this series.

Thanks in advance and please find my apologize for very late reply (covid19 + personal matters).

Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210123/03748a27/attachment.sig>

A message that is not in the archive (sent off-list or not yet received): [email protected]

#4 lore raw

PATCH 1/4 fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORT

Quoted 42 lines · Patrick DELAUNAY

From: Lukasz Majewski <[email protected]>
Sent: samedi 23 janvier 2021 13:16

Hi Patrick,

Quoted 37 lines

Hi Lukasz,

Quoted 23 lines

From: Patrick DELAUNAY <[email protected]>
Sent: mercredi 9 septembre 2020 15:23
To: u-boot at lists.denx.de
Cc: Patrick DELAUNAY <[email protected]>; Jagan Teki <[email protected]>; Kever Yang <[email protected]>; Mingming lee <[email protected]>; Miquel Raynal <[email protected]>; Peng Fan <[email protected]>; Simon Glass <[email protected]>; U-Boot STM32 <uboot-stm32@st-md- mailman.stormreply.com> Subject: [PATCH 1/4] fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORT
Importance: High

Split userdata and boot partition support for eMMC update and correct the description (update is supported).

The new configuration CONFIG_FASTBOOT_MMC_USER_SUPPORT allows to activate support of userdata partition update, based on target name=CONFIG_FASTBOOT_MMC_USER_NAME

This patch also removes the unnecessary dependency with ARCH_MEDIATEK and EFI_PARTITION.

Quoted 8 lines

---

  configs/mt8518_ap1_emmc_defconfig |  1 +
  drivers/fastboot/Kconfig          | 22 +++++++++++++++++-----
  drivers/fastboot/fb_mmc.c         |  9 ++++++---
  3 files changed, 24 insertions(+), 8 deletions(-)

Gentle reminder,

Any comments on this serie [1]

Quoted 8 lines
Quoted 3 lines

[1] http://patchwork.ozlabs.org/project/uboot/list/?series=200509

Patrick

Could you rebase this on top of current -master (after I do send the PR) and resend. There are now build / application errors on this series.

Thanks in advance and please find my apologize for very late reply (covid19 + personal matters).

I wil rebase the serie.

And I understand and accept your apologies;

anyway the serie wasn't blocking for me.

Quoted 10 lines

Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de

Regards

PAtrick

#5 lore raw

PATCH 2/4 fastboot: mmc: extend flash/erase for both emmc hwpart 1 and 2

In reply to Patrick Delaunay

Update the code and the configs for eMMC boot and userdata partitions acces
- FASTBOOT_MMC_BOOT_SUPPORT: boot partition 1 and 2 (erase/write)
- FASTBOOT_MMC_BOOT1_NAME: boot partition 1, default name="mmc0boot0"
- FASTBOOT_MMC_BOOT2_NAME: boot partition 2, default name="mmc0boot1"

This patch also removes the unnecessary dependency with ARCH_MEDIATEK and EFI_PARTITION.

---

 configs/mt8518_ap1_emmc_defconfig |  2 +-
 drivers/fastboot/Kconfig          | 26 ++++++++++++-----
 drivers/fastboot/fb_mmc.c         | 47 ++++++++++++++++++++-----------
 3 files changed, 50 insertions(+), 25 deletions(-)
configs/mt8518_ap1_emmc_defconfig +1 -1
index d5fb0ccd48..2c760c1591 100644
@@ -24,7 +24,7 @@ CONFIG_FASTBOOT_BUF_ADDR=0x56000000
 CONFIG_FASTBOOT_BUF_SIZE=0x1E00000
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT=y
+CONFIG_FASTBOOT_MMC_BOOT_SUPPORT=y
 CONFIG_FASTBOOT_MMC_USER_SUPPORT=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_HS200_SUPPORT=y
drivers/fastboot/Kconfig +19 -7
index 45e07d05e0..8a92e75007 100644
@@ -104,18 +104,19 @@ config FASTBOOT_FLASH_NAND_TRIMFFS
 	  When flashing NAND enable the DROP_FFS flag to drop trailing all-0xff
 	  pages.
 
-config FASTBOOT_MMC_BOOT1_SUPPORT
-	bool "Enable EMMC_BOOT1 flash/erase"
-	depends on FASTBOOT_FLASH_MMC && EFI_PARTITION && ARCH_MEDIATEK
+config FASTBOOT_MMC_BOOT_SUPPORT
+	bool "Enable EMMC_BOOT flash/erase"
+	depends on FASTBOOT_FLASH_MMC
 	help
 	  The fastboot "flash" and "erase" commands normally does operations
-	  on EMMC userdata. Define this to enable the special commands to
-	  flash/erase EMMC_BOOT1.
-	  The default target name for updating EMMC_BOOT1 is "mmc0boot0".
+	  on eMMC userdata. Define this to enable the special commands to
+	  flash/erase eMMC boot partition.
+	  The default target name for updating eMMC boot partition 1/2 is
+	  CONFIG_FASTBOOT_MMC_BOOT1_NAME/CONFIG_FASTBOOT_MMC_BOOT2_NAME.
 
 config FASTBOOT_MMC_BOOT1_NAME
 	string "Target name for updating EMMC_BOOT1"
-	depends on FASTBOOT_MMC_BOOT1_SUPPORT
+	depends on FASTBOOT_MMC_BOOT_SUPPORT
 	default "mmc0boot0"
 	help
 	  The fastboot "flash" and "erase" commands support operations on
@@ -124,6 +125,17 @@ config FASTBOOT_MMC_BOOT1_NAME
 	  defined here.
 	  The default target name for updating EMMC_BOOT1 is "mmc0boot0".
 
+config FASTBOOT_MMC_BOOT2_NAME
+	string "Target name for updating EMMC_BOOT2"
+	depends on FASTBOOT_MMC_BOOT_SUPPORT
+	default "mmc0boot1"
+	help
+	  The fastboot "flash" and "erase" commands support operations on
+	  EMMC_BOOT2. This occurs when the specified "EMMC_BOOT2 name" on
+	  the "fastboot flash" and "fastboot erase" commands match the value
+	  defined here.
+	  The default target name for updating EMMC_BOOT2 is "mmc0boot1".
+
 config FASTBOOT_MMC_USER_SUPPORT
 	bool "Enable eMMC userdata partition flash/erase"
 	depends on FASTBOOT_FLASH_MMC
drivers/fastboot/fb_mmc.c +30 -17

94 lines not on this page · raw message

Signature · 1 line
2.17.1
#6 lore raw

PATCH 3/4 fastboot: add command to select the default emmc hwpart for boot

In reply to Patrick Delaunay

Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with
<arg>: boot_ack boot_partition, so the command is:

$> fastboot oem partconf:<boot_ack> <boot_partition>

The partition_access argument is forced to 0 (userdata)

---

 doc/android/fastboot.rst      |  2 ++
 drivers/fastboot/Kconfig      |  7 +++++++
 drivers/fastboot/fb_command.c | 36 +++++++++++++++++++++++++++++++++++
 include/fastboot.h            |  3 +++
 4 files changed, 48 insertions(+)
doc/android/fastboot.rst +2 -0
index de3f6c37d7..7d69372753 100644
@@ -23,6 +23,8 @@ The current implementation supports the following standard commands:
 The following OEM commands are supported (if enabled):
 
 - ``oem format`` - this executes ``gpt write mmc %x $partitions``
+- ``oem partconf`` - this executes ``mmc partconf %x <arg> 0`` to configure eMMC
+  with <arg> = boot_ack boot_partition
 
 Support for both eMMC and NAND devices is included.
 
drivers/fastboot/Kconfig +7 -0
index 8a92e75007..1bcc8d4ab9 100644
@@ -189,6 +189,13 @@ config FASTBOOT_CMD_OEM_FORMAT
 	  relies on the env variable partitions to contain the list of
 	  partitions as required by the gpt command.
 
+config FASTBOOT_CMD_OEM_PARTCONF
+	bool "Enable the 'oem partconf' command"
+	depends on FASTBOOT_FLASH_MMC && SUPPORT_EMMC_BOOT
+	help
+	  Add support for the "oem partconf" command from a client. This set
+	  the mmc boot-partition for the selecting eMMC device.
+
 endif # FASTBOOT
 
 endmenu
drivers/fastboot/fb_command.c +36 -0
index 49f6a61c37..e42c018348 100644
@@ -40,6 +40,9 @@ static void reboot_bootloader(char *, char *);
 #if CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_FORMAT)
 static void oem_format(char *, char *);
 #endif
+#if CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_PARTCONF)
+static void oem_partconf(char *, char *);
+#endif
 
 static const struct {
 	const char *command;
@@ -89,6 +92,12 @@ static const struct {
 		.dispatch = oem_format,
 	},
 #endif
+#if CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_PARTCONF)
+	[FASTBOOT_COMMAND_OEM_PARTCONF] = {
+		.command = "oem partconf",
+		.dispatch = oem_partconf,
+	},
+#endif
 };
 
 /**
@@ -336,3 +345,30 @@ static void oem_format(char *cmd_parameter, char *response)
 	}
 }
 #endif
+
+#if CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_PARTCONF)
+/**
+ * oem_partconf() - Execute the OEM partconf command
+ *
+ * @cmd_parameter: Pointer to command parameter
+ * @response: Pointer to fastboot response buffer
+ */
+static void oem_partconf(char *cmd_parameter, char *response)
+{
+	char cmdbuf[32];
+
+	if (!cmd_parameter) {
+		fastboot_fail("Expected command parameter", response);
+		return;
+	}
+
+	/* execute 'mmc partconfg' command with cmd_parameter arguments*/
+	snprintf(cmdbuf, sizeof(cmdbuf), "mmc partconf %x %s 0",
+		 CONFIG_FASTBOOT_FLASH_MMC_DEV, cmd_parameter);
+	printf("Execute: %s\n", cmdbuf);
+	if (run_command(cmdbuf, 0))
+		fastboot_fail("Cannot set oem partconf", response);
+	else
+		fastboot_okay(NULL, response);
+}
+#endif
include/fastboot.h +3 -0
index 1933b1d98e..3e68852e9a 100644
@@ -36,6 +36,9 @@ enum {
 #if CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_FORMAT)
 	FASTBOOT_COMMAND_OEM_FORMAT,
 #endif
+#if CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_PARTCONF)
+	FASTBOOT_COMMAND_OEM_PARTCONF,
+#endif
 
 	FASTBOOT_COMMAND_COUNT
 };
Signature · 1 line
2.17.1
#7 lore raw

PATCH 4/4 fastboot: add command to select the eMMC boot configuration

In reply to Patrick Delaunay

Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with
<arg> = boot_bus_width reset_boot_bus_width boot_mode

$> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode>

---

 doc/android/fastboot.rst      |  1 +
 drivers/fastboot/Kconfig      |  7 +++++++
 drivers/fastboot/fb_command.c | 36 +++++++++++++++++++++++++++++++++++
 include/fastboot.h            |  3 +++
 4 files changed, 47 insertions(+)
doc/android/fastboot.rst +1 -0
index 7d69372753..6aa725fcd8 100644
@@ -25,6 +25,7 @@ The following OEM commands are supported (if enabled):
 - ``oem format`` - this executes ``gpt write mmc %x $partitions``
 - ``oem partconf`` - this executes ``mmc partconf %x <arg> 0`` to configure eMMC
   with <arg> = boot_ack boot_partition
+- ``oem bootbus``  - this executes ``mmc bootbus %x %s`` to configure eMMC
 
 Support for both eMMC and NAND devices is included.
 
drivers/fastboot/Kconfig +7 -0
index 1bcc8d4ab9..a17e488714 100644
@@ -196,6 +196,13 @@ config FASTBOOT_CMD_OEM_PARTCONF
 	  Add support for the "oem partconf" command from a client. This set
 	  the mmc boot-partition for the selecting eMMC device.
 
+config FASTBOOT_CMD_OEM_BOOTBUS
+	bool "Enable the 'oem bootbus' command"
+	depends on FASTBOOT_FLASH_MMC && SUPPORT_EMMC_BOOT
+	help
+	  Add support for the "oem bootbus" command from a client. This set
+	  the mmc boot configuration for the selecting eMMC device.
+
 endif # FASTBOOT
 
 endmenu
drivers/fastboot/fb_command.c +36 -0
index e42c018348..00efd477db 100644
@@ -43,6 +43,9 @@ static void oem_format(char *, char *);
 #if CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_PARTCONF)
 static void oem_partconf(char *, char *);
 #endif
+#if CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_BOOTBUS)
+static void oem_bootbus(char *, char *);
+#endif
 
 static const struct {
 	const char *command;
@@ -98,6 +101,12 @@ static const struct {
 		.dispatch = oem_partconf,
 	},
 #endif
+#if CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_BOOTBUS)
+	[FASTBOOT_COMMAND_OEM_BOOTBUS] = {
+		.command = "oem bootbus",
+		.dispatch = oem_bootbus,
+	},
+#endif
 };
 
 /**
@@ -372,3 +381,30 @@ static void oem_partconf(char *cmd_parameter, char *response)
 		fastboot_okay(NULL, response);
 }
 #endif
+
+#if CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_BOOTBUS)
+/**
+ * oem_bootbus() - Execute the OEM bootbus command
+ *
+ * @cmd_parameter: Pointer to command parameter
+ * @response: Pointer to fastboot response buffer
+ */
+static void oem_bootbus(char *cmd_parameter, char *response)
+{
+	char cmdbuf[32];
+
+	if (!cmd_parameter) {
+		fastboot_fail("Expected command parameter", response);
+		return;
+	}
+
+	/* execute 'mmc bootbus' command with cmd_parameter arguments*/
+	snprintf(cmdbuf, sizeof(cmdbuf), "mmc bootbus %x %s",
+		 CONFIG_FASTBOOT_FLASH_MMC_DEV, cmd_parameter);
+	printf("Execute: %s\n", cmdbuf);
+	if (run_command(cmdbuf, 0))
+		fastboot_fail("Cannot set oem bootbus", response);
+	else
+		fastboot_okay(NULL, response);
+}
+#endif
include/fastboot.h +3 -0
index 3e68852e9a..966ffc6d94 100644
@@ -39,6 +39,9 @@ enum {
 #if CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_PARTCONF)
 	FASTBOOT_COMMAND_OEM_PARTCONF,
 #endif
+#if CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_BOOTBUS)
+	FASTBOOT_COMMAND_OEM_BOOTBUS,
+#endif
 
 	FASTBOOT_COMMAND_COUNT
 };
Signature · 1 line
2.17.1