Skip to contentSkip to conversation

bonding: fix randomly populated arp target array

PATCH In review Jarod Wilson 4 participants 5 messages May 19, 2017 – May 22, 2017

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 bonding: fix randomly populated arp target array

In commit dc9c4d0fe023, the arp_target array moved from a static global to a local variable. By the nature of static globals, the array used to be initialized to all 0. At present, it's full of random data, which that gets interpreted as arp_target values, when none have actually been specified. Systems end up booting with spew along these lines:

[   32.161783] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[   32.168475] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[   32.175089] 8021q: adding VLAN 0 to HW filter on device lacp0
[   32.193091] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[   32.204892] lacp0: Setting MII monitoring interval to 100
[   32.211071] lacp0: Removing ARP target 216.124.228.17
[   32.216824] lacp0: Removing ARP target 218.160.255.255
[   32.222646] lacp0: Removing ARP target 185.170.136.184
[   32.228496] lacp0: invalid ARP target 255.255.255.255 specified for removal
[   32.236294] lacp0: option arp_ip_target: invalid value (-255.255.255.255)
[   32.243987] lacp0: Removing ARP target 56.125.228.17
[   32.249625] lacp0: Removing ARP target 218.160.255.255
[   32.255432] lacp0: Removing ARP target 15.157.233.184
[   32.261165] lacp0: invalid ARP target 255.255.255.255 specified for removal
[   32.268939] lacp0: option arp_ip_target: invalid value (-255.255.255.255)
[   32.276632] lacp0: Removing ARP target 16.0.0.0
[   32.281755] lacp0: Removing ARP target 218.160.255.255
[   32.287567] lacp0: Removing ARP target 72.125.228.17
[   32.293165] lacp0: Removing ARP target 218.160.255.255
[   32.298970] lacp0: Removing ARP target 8.125.228.17
[   32.304458] lacp0: Removing ARP target 218.160.255.255

None of these were actually specified as ARP targets, and the driver does seem to clean up the mess okay, but it's rather noisy and confusing, leaks values to userspace, and the 255.255.255.255 spew shows up even when debug prints are disabled.

The fix: just zero out arp_target at init time.

While we're in here, init arp_all_targets_value in the right place.

Fixes dc9c4d0fe023 ("bonding: reduce scope of some global variables")
CC Mahesh Bandewar <[email protected]>
CC Jay Vosburgh <[email protected]>
CC Veaceslav Falico <[email protected]>
CC Andy Gospodarek <[email protected]>
---
 drivers/net/bonding/bond_main.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/net/bonding/bond_main.c +2 -3
index 2be78807fd6e..73313318399c 100644
@@ -4271,10 +4271,10 @@ static int bond_check_params(struct bond_params *params)
 	int arp_validate_value, fail_over_mac_value, primary_reselect_value, i;
 	struct bond_opt_value newval;
 	const struct bond_opt_value *valptr;
-	int arp_all_targets_value;
+	int arp_all_targets_value = 0;
 	u16 ad_actor_sys_prio = 0;
 	u16 ad_user_port_key = 0;
-	__be32 arp_target[BOND_MAX_ARP_TARGETS];
+	__be32 arp_target[BOND_MAX_ARP_TARGETS] = { 0 };
 	int arp_ip_count;
 	int bond_mode	= BOND_MODE_ROUNDROBIN;
 	int xmit_hashtype = BOND_XMIT_POLICY_LAYER2;
@@ -4501,7 +4501,6 @@ static int bond_check_params(struct bond_params *params)
 		arp_validate_value = 0;
 	}
 
-	arp_all_targets_value = 0;
 	if (arp_all_targets) {
 		bond_opt_initstr(&newval, arp_all_targets);
 		valptr = bond_opt_parse(bond_opt_get(BOND_OPT_ARP_ALL_TARGETS),
Signature · 1 line
2.12.1
Acked-by on v1 1/1
#1 lore raw
Quoted 28 lines · Jarod Wilson

In commit dc9c4d0fe023, the arp_target array moved from a static global to a local variable. By the nature of static globals, the array used to be initialized to all 0. At present, it's full of random data, which that gets interpreted as arp_target values, when none have actually been specified. Systems end up booting with spew along these lines:

[   32.161783] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[   32.168475] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[   32.175089] 8021q: adding VLAN 0 to HW filter on device lacp0
[   32.193091] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[   32.204892] lacp0: Setting MII monitoring interval to 100
[   32.211071] lacp0: Removing ARP target 216.124.228.17
[   32.216824] lacp0: Removing ARP target 218.160.255.255
[   32.222646] lacp0: Removing ARP target 185.170.136.184
[   32.228496] lacp0: invalid ARP target 255.255.255.255 specified for removal
[   32.236294] lacp0: option arp_ip_target: invalid value (-255.255.255.255)
[   32.243987] lacp0: Removing ARP target 56.125.228.17
[   32.249625] lacp0: Removing ARP target 218.160.255.255
[   32.255432] lacp0: Removing ARP target 15.157.233.184
[   32.261165] lacp0: invalid ARP target 255.255.255.255 specified for removal
[   32.268939] lacp0: option arp_ip_target: invalid value (-255.255.255.255)
[   32.276632] lacp0: Removing ARP target 16.0.0.0
[   32.281755] lacp0: Removing ARP target 218.160.255.255
[   32.287567] lacp0: Removing ARP target 72.125.228.17
[   32.293165] lacp0: Removing ARP target 218.160.255.255
[   32.298970] lacp0: Removing ARP target 8.125.228.17
[   32.304458] lacp0: Removing ARP target 218.160.255.255
Quoted 9 lines

None of these were actually specified as ARP targets, and the driver does seem to clean up the mess okay, but it's rather noisy and confusing, leaks values to userspace, and the 255.255.255.255 spew shows up even when debug prints are disabled.

The fix: just zero out arp_target at init time.

While we're in here, init arp_all_targets_value in the right place.

Looks good. Thanks, Jarod!

Quoted 40 lines
Fixes dc9c4d0fe023 ("bonding: reduce scope of some global variables")
CC Mahesh Bandewar <[email protected]>
CC Jay Vosburgh <[email protected]>
CC Veaceslav Falico <[email protected]>
CC Andy Gospodarek <[email protected]>
---
 drivers/net/bonding/bond_main.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/net/bonding/bond_main.c +2 -3
index 2be78807fd6e..73313318399c 100644
@@ -4271,10 +4271,10 @@ static int bond_check_params(struct bond_params *params)
 	int arp_validate_value, fail_over_mac_value, primary_reselect_value, i;
 	struct bond_opt_value newval;
 	const struct bond_opt_value *valptr;
-	int arp_all_targets_value;
+	int arp_all_targets_value = 0;
 	u16 ad_actor_sys_prio = 0;
 	u16 ad_user_port_key = 0;
-	__be32 arp_target[BOND_MAX_ARP_TARGETS];
+	__be32 arp_target[BOND_MAX_ARP_TARGETS] = { 0 };
 	int arp_ip_count;
 	int bond_mode	= BOND_MODE_ROUNDROBIN;
 	int xmit_hashtype = BOND_XMIT_POLICY_LAYER2;
@@ -4501,7 +4501,6 @@ static int bond_check_params(struct bond_params *params)
 		arp_validate_value = 0;
 	}
 
-	arp_all_targets_value = 0;
 	if (arp_all_targets) {
 		bond_opt_initstr(&newval, arp_all_targets);
 		valptr = bond_opt_parse(bond_opt_get(BOND_OPT_ARP_ALL_TARGETS),
Signature · 1 line
2.12.1
#2 lore raw
In reply to Jarod Wilson
Quoted 54 lines · Jarod Wilson

In commit dc9c4d0fe023, the arp_target array moved from a static global to a local variable. By the nature of static globals, the array used to be initialized to all 0. At present, it's full of random data, which that gets interpreted as arp_target values, when none have actually been specified. Systems end up booting with spew along these lines:

[   32.161783] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[   32.168475] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[   32.175089] 8021q: adding VLAN 0 to HW filter on device lacp0
[   32.193091] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[   32.204892] lacp0: Setting MII monitoring interval to 100
[   32.211071] lacp0: Removing ARP target 216.124.228.17
[   32.216824] lacp0: Removing ARP target 218.160.255.255
[   32.222646] lacp0: Removing ARP target 185.170.136.184
[   32.228496] lacp0: invalid ARP target 255.255.255.255 specified for removal
[   32.236294] lacp0: option arp_ip_target: invalid value (-255.255.255.255)
[   32.243987] lacp0: Removing ARP target 56.125.228.17
[   32.249625] lacp0: Removing ARP target 218.160.255.255
[   32.255432] lacp0: Removing ARP target 15.157.233.184
[   32.261165] lacp0: invalid ARP target 255.255.255.255 specified for removal
[   32.268939] lacp0: option arp_ip_target: invalid value (-255.255.255.255)
[   32.276632] lacp0: Removing ARP target 16.0.0.0
[   32.281755] lacp0: Removing ARP target 218.160.255.255
[   32.287567] lacp0: Removing ARP target 72.125.228.17
[   32.293165] lacp0: Removing ARP target 218.160.255.255
[   32.298970] lacp0: Removing ARP target 8.125.228.17
[   32.304458] lacp0: Removing ARP target 218.160.255.255

None of these were actually specified as ARP targets, and the driver does seem to clean up the mess okay, but it's rather noisy and confusing, leaks values to userspace, and the 255.255.255.255 spew shows up even when debug prints are disabled.

The fix: just zero out arp_target at init time.

While we're in here, init arp_all_targets_value in the right place.

Fixes dc9c4d0fe023 ("bonding: reduce scope of some global variables")
CC Mahesh Bandewar <[email protected]>
CC Jay Vosburgh <[email protected]>
CC Veaceslav Falico <[email protected]>
CC Andy Gospodarek <[email protected]>
---
 drivers/net/bonding/bond_main.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/net/bonding/bond_main.c +0 -0
index 2be78807fd6e..73313318399c 100644

drivers/net/bonding/bond_main.c static int bond_check_params(struct bond_params *params) · line 4274

Quoted 5 lines
drivers/net/bonding/bond_main.c +1 -1
@@ -4271,10 +4271,10 @@ static int bond_check_params(struct bond_params *params)
        int arp_validate_value, fail_over_mac_value, primary_reselect_value, i;
        struct bond_opt_value newval;
        const struct bond_opt_value *valptr;
-       int arp_all_targets_value;
+       int arp_all_targets_value = 0;

I think this is unnecessary as long as the var is initialized before it's use.

drivers/net/bonding/bond_main.c static int bond_check_params(struct bond_params *params) · line 4277

Quoted 4 lines
drivers/net/bonding/bond_main.c +1 -1
        u16 ad_actor_sys_prio = 0;
        u16 ad_user_port_key = 0;
-       __be32 arp_target[BOND_MAX_ARP_TARGETS];
+       __be32 arp_target[BOND_MAX_ARP_TARGETS] = { 0 };

this is the only change required to avoid reported error.

Quoted 14 lines
drivers/net/bonding/bond_main.c +0 -2
        int arp_ip_count;
        int bond_mode   = BOND_MODE_ROUNDROBIN;
        int xmit_hashtype = BOND_XMIT_POLICY_LAYER2;
@@ -4501,7 +4501,6 @@ static int bond_check_params(struct bond_params *params)
                arp_validate_value = 0;
        }
 
-       arp_all_targets_value = 0;
        if (arp_all_targets) {
                bond_opt_initstr(&newval, arp_all_targets);
                valptr = bond_opt_parse(bond_opt_get(BOND_OPT_ARP_ALL_TARGETS),
--

2.12.1

#3 lore raw
Quoted 50 lines · Mahesh Bandewar (महेश बंडेवार)
Quoted 49 lines · Jarod Wilson

In commit dc9c4d0fe023, the arp_target array moved from a static global to a local variable. By the nature of static globals, the array used to be initialized to all 0. At present, it's full of random data, which that gets interpreted as arp_target values, when none have actually been specified. Systems end up booting with spew along these lines:

[   32.161783] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[   32.168475] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[   32.175089] 8021q: adding VLAN 0 to HW filter on device lacp0
[   32.193091] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[   32.204892] lacp0: Setting MII monitoring interval to 100
[   32.211071] lacp0: Removing ARP target 216.124.228.17
[   32.216824] lacp0: Removing ARP target 218.160.255.255
[   32.222646] lacp0: Removing ARP target 185.170.136.184
[   32.228496] lacp0: invalid ARP target 255.255.255.255 specified for removal
[   32.236294] lacp0: option arp_ip_target: invalid value (-255.255.255.255)
[   32.243987] lacp0: Removing ARP target 56.125.228.17
[   32.249625] lacp0: Removing ARP target 218.160.255.255
[   32.255432] lacp0: Removing ARP target 15.157.233.184
[   32.261165] lacp0: invalid ARP target 255.255.255.255 specified for removal
[   32.268939] lacp0: option arp_ip_target: invalid value (-255.255.255.255)
[   32.276632] lacp0: Removing ARP target 16.0.0.0
[   32.281755] lacp0: Removing ARP target 218.160.255.255
[   32.287567] lacp0: Removing ARP target 72.125.228.17
[   32.293165] lacp0: Removing ARP target 218.160.255.255
[   32.298970] lacp0: Removing ARP target 8.125.228.17
[   32.304458] lacp0: Removing ARP target 218.160.255.255

None of these were actually specified as ARP targets, and the driver does seem to clean up the mess okay, but it's rather noisy and confusing, leaks values to userspace, and the 255.255.255.255 spew shows up even when debug prints are disabled.

The fix: just zero out arp_target at init time.

While we're in here, init arp_all_targets_value in the right place.

Fixes dc9c4d0fe023 ("bonding: reduce scope of some global variables")
CC Mahesh Bandewar <[email protected]>
CC Jay Vosburgh <[email protected]>
CC Veaceslav Falico <[email protected]>
CC Andy Gospodarek <[email protected]>
---
  drivers/net/bonding/bond_main.c | 5 ++---
  1 file changed, 2 insertions(+), 3 deletions(-)
Quoted 12 lines

drivers/net/bonding/bond_main.c static int bond_check_params(struct bond_params *params) · line 4274

Quoted 10 lines
drivers/net/bonding/bond_main.c +1 -1
index 2be78807fd6e..73313318399c 100644
@@ -4271,10 +4271,10 @@ static int bond_check_params(struct bond_params *params)
         int arp_validate_value, fail_over_mac_value, primary_reselect_value, i;
         struct bond_opt_value newval;
         const struct bond_opt_value *valptr;
-       int arp_all_targets_value;
+       int arp_all_targets_value = 0;

I think this is unnecessary as long as the var is initialized before it's use.

No, it's not part of the fix, it just irked me. The extra line is completely unnecessary, less lines is good. Possibly shouldn't have folded it into this fix, will respin and submit the cleanup another time, if necessary.

Quoted 6 lines

drivers/net/bonding/bond_main.c static int bond_check_params(struct bond_params *params) · line 4277

Quoted 4 lines
drivers/net/bonding/bond_main.c +1 -1
         u16 ad_actor_sys_prio = 0;
         u16 ad_user_port_key = 0;
-       __be32 arp_target[BOND_MAX_ARP_TARGETS];
+       __be32 arp_target[BOND_MAX_ARP_TARGETS] = { 0 };

this is the only change required to avoid reported error.

Absolutely correct.

Signature · 2 lines
Jarod Wilson
[email protected]
maintainer
#4 lore raw
In reply to Jarod Wilson

From: Jarod Wilson <[email protected]>
Date: Fri, 19 May 2017 14:46:46 -0400

Quoted 5 lines

In commit dc9c4d0fe023, the arp_target array moved from a static global to a local variable. By the nature of static globals, the array used to be initialized to all 0. At present, it's full of random data, which that gets interpreted as arp_target values, when none have actually been specified. Systems end up booting with spew along these lines:

...

Quoted 9 lines

None of these were actually specified as ARP targets, and the driver does seem to clean up the mess okay, but it's rather noisy and confusing, leaks values to userspace, and the 255.255.255.255 spew shows up even when debug prints are disabled.

The fix: just zero out arp_target at init time.

While we're in here, init arp_all_targets_value in the right place.

Quoted 8 lines
Fixes dc9c4d0fe023 ("bonding: reduce scope of some global variables")
CC Mahesh Bandewar <[email protected]>
CC Jay Vosburgh <[email protected]>
CC Veaceslav Falico <[email protected]>
CC Andy Gospodarek <[email protected]>

Whoops... applied, thanks Jarod.