env: env_sf: don't set .init op if not needed
PATCH 1/1 env: env_sf: don't set .init op if not needed
Commit 92765f45bb95 ("env: Access Environment in SPI flashes before relocation") at least breaks the Kontron sl28 board. I guess it also breaks others which use a (late) SPI environment.
Unfortunately, we cannot set the .init op and fall back to the same behavior as it would be unset. Thus guard the .init op by #if's.
--- env/sf.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-)
env/sf.c +10 -3
@@ -385,7 +385,7 @@ out: }#endif -static int env_sf_init (void ) +static int __maybe_unused env_sf_init (void ) {#if defined(INITENV ) && (CONFIG_ENV_ADDR !=0x0 )return env_sf_init_addr ();
@@ -393,8 +393,13 @@ static int env_sf_init(void)return env_sf_init_early ();#endif /* -* we must return with 0 if there is nothing done, -* else env_set_inited() get not called in env_init() +* We shouldn't end up here. Unfortunately, there is no +* way to return a value which yields the same behavior +* as if the .init op wouldn't be set at all. See +* env_init(); env_set_inited() is only called if we +* return 0, but the default environment is only loaded +* if -ENOENT is returned. Therefore, we need the ugly +* ifdeferry for the .init op. */ return 0 ; }
@@ -404,5 +409,7 @@ U_BOOT_ENV_LOCATION(sf) = {ENV_NAME ("SPIFlash" ) .load = env_sf_load, .save =CONFIG_IS_ENABLED (SAVEENV ) ?ENV_SAVE_PTR (env_sf_save) :NULL , +#if (defined(INITENV) && (CONFIG_ENV_ADDR != 0x0)) || defined(CONFIG_ENV_SPI_EARLY) .init = env_sf_init, +#endif };
Signature · 1 line
2.20.1
PATCH 1/1 env: env_sf: don't set .init op if not needed
Hello Michael,
Am 01.11.2020 um 14:38 schrieb Michael Walle:
Quoted 44 lines
Commit
92765f45bb95("env: Access Environment in SPI flashes before relocation") at least breaks the Kontron sl28 board. I guess it also breaks others which use a (late) SPI environment.Unfortunately, we cannot set the .init op and fall back to the same behavior as it would be unset. Thus guard the .init op by #if's.
Fixes 92765f45bb95 ("env: Access Environment in SPI flashes before relocation")Signed-off-by Michael Walle <[email protected]>--- env/sf.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-)env/sf.c +8
-3@@ -385,7 +385,7 @@ out: }#endif -static int env_sf_init (void ) +static int __maybe_unused env_sf_init (void ) {#if defined(INITENV ) && (CONFIG_ENV_ADDR !=0x0 )return env_sf_init_addr ();@@ -393,8 +393,13 @@ static int env_sf_init(void)return env_sf_init_early ();#endif /* -* we must return with 0 if there is nothing done, -* else env_set_inited() get not called in env_init() +* We shouldn't end up here. Unfortunately, there is no +* way to return a value which yields the same behavior +* as if the .init op wouldn't be set at all. See +* env_init(); env_set_inited() is only called if we +* return 0, but the default environment is only loaded +* if -ENOENT is returned. Therefore, we need the ugly +* ifdeferry for the .init op. */ return 0 ; }
env/sf.c U_BOOT_ENV_LOCATION(sf) = { · line 415
Quoted 7 lines
env/sf.c +2
-0@@ -404,5 +409,7 @@ U_BOOT_ENV_LOCATION(sf) = {ENV_NAME ("SPIFlash" ) .load = env_sf_load, .save =CONFIG_IS_ENABLED (SAVEENV ) ?ENV_SAVE_PTR (env_sf_save) :NULL , +#if (defined(INITENV) && (CONFIG_ENV_ADDR != 0x0)) || defined(CONFIG_ENV_SPI_EARLY) .init = env_sf_init, +#endif };
Ok, tested this patch on an imx6 based board with SPI NOR and it works.
But.... there is a problem with environment in spi nor and ENV_APPEND enabled, with current implementation (also before my patches applied):
I enabled now ENV_APPEND on this board and
CONFIG_ENV_IS_NOWHERECONFIG_ENV_IS_IN_SPI_FLASH
and the Environment from SPI NOR never loaded as gd->env_valid is always ENV_INVALID and env_load() never called from env_relocate().
What do you think about following patch:
env/sf.c +6 -2
@@ -393,9 +393,13 @@ static int env_sf_init(void)return env_sf_init_early ();#endif /* -* we must return with 0 if there is nothing done, -* else env_set_inited() get not called in env_init() +* We must return with 0 if there is nothing done, +* to get inited bit set in env_init(). +* We need to set env_valid to ENV_VALID, so later +* env_load() loads the Environment from SPI NOR. */ + gd->env_addr = (ulong)&default_environment[0 ]; + gd->env_valid =ENV_VALID ;return 0 ; }
Can you try it?
Another option would be to reutrn -ENOENT and set init bit also when a init function returns -ENOENT:
env/env.c +2 -0
@@ -329,6 +329,8 @@ int env_init(void)for (prio =0 ; (drv =env_driver_lookup (ENVOP_INIT , prio)); prio++) {if (!drv->init || !(ret = drv->init ()))env_set_inited (drv->location); +if (ret == -ENOENT ) +env_set_inited (drv->location);debug ("%s: Environment %s init done (ret=%d)\n" , __func__, drv->name, ret);
env/sf.c +1 -1
@@ -396,7 +396,7 @@ static int env_sf_init(void)* we must return with 0 if there is nothing done, * else env_set_inited() get not called in env_init() */ -return 0 ; +return -ENOENT ; }
But this may has impact on other environment drivers ... but may is the cleaner approach as env_init() later sets the default environment if ret is -ENOENT ...
Thanks!
bye,
Heiko
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de
PATCH 1/1 env: env_sf: don't set .init op if not needed
Dear Heiko,
Quoted 5 lines · In message <[email protected]> you wrote:
I enabled now
ENV_APPENDon this board and
CONFIG_ENV_IS_NOWHERECONFIG_ENV_IS_IN_SPI_FLASH
This gives me the creeps. I know this is not cause by anything in your patch, but anyway...
Apparently the meaning of CONFIG_ENV_IS_NOWHERE is nowhere documented :-(
But common sense says that "IS NOWHERE" means that there is no storage defined for the environment. I would expect, that Kconfig does not even allow to enable any CONFIG_ENV_IS_IN_* when CONFIG_ENV_IS_NOWHERE is selected - these are logically exclusive.
May I suggest that:
1) our Kconfig files are changed such that CONFIG_ENV_IS_NOWHERE and CONFIG_ENV_IS_IN_* are indeed exclusive, so that we adhere to the POLA [1] ?
2) for cases like this one, where there actually _is_ some storage defined, but it shall be used in a non-standard way, a new CONFIG_ option gets created that expresses in it's name what it does?
[1] https://en.wikipedia.org/wiki/Principle_of_least_astonishment
Thanks!
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de You can fool some of the people all of the time, and You can fool all of the people some of the time, but You can't fool mom.
PATCH 1/1 env: env_sf: don't set .init op if not needed
Hello Wolfgang,
Am 02.11.2020 um 13:51 schrieb Wolfgang Denk:
Quoted 6 lines
Dear Heiko,
Quoted 3 lines · In message <[email protected]> you wrote:
I enabled now
ENV_APPENDon this board and
Quoted 8 lines
Quoted 2 lines
CONFIG_ENV_IS_NOWHERECONFIG_ENV_IS_IN_SPI_FLASHThis gives me the creeps. I know this is not cause by anything in your patch, but anyway...
Apparently the meaning of
CONFIG_ENV_IS_NOWHEREis nowhere documented :-(
env/Kconfig says:
config ENV_IS_NOWHERE
bool "Environment is not stored"
default y if !ENV_IS_IN_EEPROM && !ENV_IS_IN_EXT4 && \
!ENV_IS_IN_FAT && !ENV_IS_IN_FLASH && \
!ENV_IS_IN_MMC && !ENV_IS_IN_NAND && \
!ENV_IS_IN_NVRAM && !ENV_IS_IN_ONENAND && \
!ENV_IS_IN_REMOTE && !ENV_IS_IN_SPI_FLASH && \
!ENV_IS_IN_UBI
help
Define this if you don't want to or can't have an environment stored
on a storage medium. In this case the environment will still exist
while U-Boot is running, but once U-Boot exits it will not be
stored. U-Boot will therefore always start up with a default
environment.Quoted 2 lines
But common sense says that "IS NOWHERE" means that there is no storage defined for the environment. I would expect, that
Kconfig
Yes and use default one ...
Quoted 2 lines
does not even allow to enable any CONFIG_ENV_IS_IN_* when
CONFIG_ENV_IS_NOWHEREis selected - these are logically exclusive.
Hmm...
Quoted 5 lines
May I suggest that:
1) our
Kconfigfiles are changed such thatCONFIG_ENV_IS_NOWHEREand CONFIG_ENV_IS_IN_* are indeed exclusive, so that we adhere to the POLA [1] ?
Yes if we really want such a hard setting without having an environment!
Currently CONFIG_ENV_IS_NOWHERE is not that hard and means U-Boot has no Environment ... it means use the built in default environment...
Quoted 4 lines
2) for cases like this one, where there actually _is_ some storage defined, but it shall be used in a non-standard way, a new
CONFIG_option gets created that expresses in it's name what it does?
Not in a none standard way! Instead you can define more than one environment storage devices and load them in a board specific order (defined thorugh board specfif function env_get_location())
For example:
- load first default environment (and you are correct ENV_IS_NOWHERE is here really a misleading name).
- load environment from SPI NOR ...
May we only should do a simple rename ?
ENV_IS_NOWHERE -> ENV_IS_IN_UBOOT (or ENV_IS_IN_DEFAULT) ?
If we really want a hard "there is no storage" switch (which really means there is *no* environment ... I do not even know, if U-boot works without!) we should introduce a new ENV_IS_IN_DEFAULT which loads the default environment...
(I do not like this, as all? boards have a default environment, so
it is enabled for all? boards ... which makes it obsolete...)
better suggestions?
bye,
Heiko
Quoted 9 lines
[1] https://en.wikipedia.org/wiki/Principle_of_least_astonishment
Thanks!
Best regards,
Wolfgang Denk
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de
PATCH 1/1 env: env_sf: don't set .init op if not needed
Dear Heiko,
Quoted 5 lines · In message <[email protected]> you wrote:
Quoted 3 lines
Apparently the meaning of
CONFIG_ENV_IS_NOWHEREis nowhere documented :-(env/Kconfig says:
Ah, I missed that. I was only checkng the README and the doc/ files...
Quoted 2 lines
config
ENV_IS_NOWHERE
bool "Environment is not stored"
OK, but this is a pretty clear statement.
Quoted 8 lines
help
Define this if you don't want to or can't have an environment stored on a storage medium. In this case the environment will still exist while U-Boot is running, but once U-Boot exits it will not be stored. U-Boot will therefore always start up with a default environment.
Quoted 4 lines
Quoted 2 lines
But common sense says that "IS NOWHERE" means that there is no storage defined for the environment. I would expect, that
KconfigYes and use default one ...
Correct. So this matches my understanding of the name of the config
option: use this if there is no storage defined for the environment.
Quoted 5 lines
Quoted 2 lines
does not even allow to enable any CONFIG_ENV_IS_IN_* when
CONFIG_ENV_IS_NOWHEREis selected - these are logically exclusive.Hmm...
Quoted 7 lines
Quoted 5 lines
May I suggest that:
1) our
Kconfigfiles are changed such thatCONFIG_ENV_IS_NOWHEREand CONFIG_ENV_IS_IN_* are indeed exclusive, so that we adhere to the POLA [1] ?Yes if we really want such a hard setting without having an environment!
Well, this is exactly what this config option is supposed to do - both according to the name and according to the documentation: "the environment ... will not be stored."
Quoted 2 lines
Currently
CONFIG_ENV_IS_NOWHEREis not that hard and means U-Boot has no Environment ... it means use the built in default environment...
I would rephrase this: Currently the implemantation does not enforce the correct behaviour, so it has been misused for other (also useful) things. But this is not clean and should be fixed.
Quoted 8 lines
Quoted 4 lines
2) for cases like this one, where there actually _is_ some storage defined, but it shall be used in a non-standard way, a new
CONFIG_option gets created that expresses in it's name what it does?Not in a none standard way! Instead you can define more than one environment storage devices and load them in a board specific order (defined thorugh board specfif function
env_get_location())
Yes, agreed. But this logically impossible if there is no storage at all, which is what CONFIG_ENV_IS_NOWHERE says.
For such cases we must not define CONFIG_ENV_IS_NOWHERE, but something else / something new instead.
Quoted 9 lines
For example:
- load first default environment (and you are correctENV_IS_NOWHEREis here really a misleading name).- load environment from SPI NOR ...
May we only should do a simple rename ?
ENV_IS_NOWHERE->ENV_IS_IN_UBOOT(orENV_IS_IN_DEFAULT) ?
In my understanding, ENV_IS_IN_* defines the storage device used to save the persistent copy (the external representation(s)) of the environment, which get written when you use "env save". So both your suggestions are not acceptable, as the the envrionment never gets saved to the default environment - this is just the data that is used to initialize it in the same was as in an emergency when the persistent the environment (more precisely: when all copies of it) cannot be read (I/O or checksum error).
Quoted 1 line
If we really want a hard "there is no storage" switch (which really
You miss the fact that we already have this: CONFIG_ENV_IS_NOWHERE
It is just not implemented correctly, and I ask for a cleanup.
Quoted 3 lines
means there is *no* environment ... I do not even know, if U-boot works without!) we should introduce a new
ENV_IS_IN_DEFAULTwhich loads the default environment...
You misunderstand. "No storage" means no storage for writing the _persistent_ environment, see above. Int his case there is still the same emergency handling as in cases of corrupted peristent environment - the fallback to the builtin (socalled "default") environment.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Uncertain fortune is thoroughly mastered by the equity of the calcu- lation. - Blaise Pascal
PATCH 1/1 env: env_sf: don't set .init op if not needed
Quoted 62 lines · Wolfgang Denk
Dear Heiko,
Quoted 5 lines · In message <[email protected]> you wrote:
Quoted 3 lines
Apparently the meaning of
CONFIG_ENV_IS_NOWHEREis nowhere documented :-(env/Kconfig says:
Ah, I missed that. I was only checkng the README and the doc/ files...
Quoted 2 lines
config
ENV_IS_NOWHERE
bool "Environment is not stored"OK, but this is a pretty clear statement.
Quoted 8 lines
help
Define this if you don't want to or can't have an environment stored on a storage medium. In this case the environment will still exist while U-Boot is running, but once U-Boot exits it will not be stored. U-Boot will therefore always start up with a default environment.Quoted 4 lines
Quoted 2 lines
But common sense says that "IS NOWHERE" means that there is no storage defined for the environment. I would expect, that
KconfigYes and use default one ...
Correct. So this matches my understanding of the name of the config
option: use this if there is no storage defined for the environment.Quoted 5 lines
Quoted 2 lines
does not even allow to enable any CONFIG_ENV_IS_IN_* when
CONFIG_ENV_IS_NOWHEREis selected - these are logically exclusive.Hmm...
Quoted 7 lines
Quoted 5 lines
May I suggest that:
1) our
Kconfigfiles are changed such thatCONFIG_ENV_IS_NOWHEREand CONFIG_ENV_IS_IN_* are indeed exclusive, so that we adhere to the POLA [1] ?Yes if we really want such a hard setting without having an environment!
Well, this is exactly what this config option is supposed to do - both according to the name and according to the documentation: "the environment ... will not be stored."
Quoted 2 lines
Currently
CONFIG_ENV_IS_NOWHEREis not that hard and means U-Boot has no Environment ... it means use the built in default environment...I would rephrase this: Currently the implemantation does not enforce the correct behaviour, so it has been misused for other (also useful) things. But this is not clean and should be fixed.
Quoted 5 lines
Quoted 4 lines
2) for cases like this one, where there actually _is_ some storage defined, but it shall be used in a non-standard way, a new
CONFIG_option gets created that expresses in it's name what it does?
Quoted 6 lines
Quoted 3 lines
Not in a none standard way! Instead you can define more than one environment storage devices and load them in a board specific order (defined thorugh board specfif function
env_get_location())Yes, agreed. But this logically impossible if there is no storage at all, which is what
CONFIG_ENV_IS_NOWHEREsays.
Then should all the current config options CONFIG_ENV_IS_ be renamed to CONFIG_ENV_MAY_BE_? Because that's really what they mean.
I certainly agree the current naming isn't very accurate, but the ability to choose CONFIG_ENV_IS_NOWHERE along with some "real" storage option is quite useful. We use it so that we can use the exact same U-Boot binary for both development and production, just different .dtbs; there's a board-specific env_get_location() which reads a DT property to decide whether to return ENVL_SPI_FLASH or ENVL_NOWHERE. Whether there actually needs to be a stub nowhere.c driver for that or one could just return ENVL_UNKNOWN I don't know.
Rasmus
PATCH 1/1 env: env_sf: don't set .init op if not needed
Dear Rasmus,
Quoted 10 lines · In message <[email protected]> you wrote:
Quoted 7 lines
Quoted 4 lines
Not in a none standard way! Instead you can define more than one environment storage devices and load them in a board specific order (defined thorugh board specfif function
env_get_location())Yes, agreed. But this logically impossible if there is no storage at all, which is what
CONFIG_ENV_IS_NOWHEREsays.Then should all the current config options
CONFIG_ENV_IS_be renamed toCONFIG_ENV_MAY_BE_? Because that's really what they mean.
This is not correct.
The CONFIG_ENV_IS_FOO means: if you use "env save", then U-Boot will write the config to external storage using the FOO storage device.
Quoted 8 lines
I certainly agree the current naming isn't very accurate, but the ability to choose
CONFIG_ENV_IS_NOWHEREalong with some "real" storage option is quite useful. We use it so that we can use the exact same U-Boot binary for both development and production, just different .dtbs; there's a board-specificenv_get_location()which reads a DT property to decide whether to returnENVL_SPI_FLASHorENVL_NOWHERE. Whether there actually needs to be a stubnowhere.cdriver for that or one could just returnENVL_UNKNOWNI don't know.
If it makes sense do have a nulldev, then it should be added as a CONFIG_ENV_IS_ option. This is something fundamental different from NOWHERE.
If you define CONFIG_ENV_IS_NOWHERE, I would for example expect that all "env save" related code is omitted as we will never need it.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de A metaphor is like a simile.
PATCH 1/1 env: env_sf: don't set .init op if not needed
Quoted 11 lines · Wolfgang Denk
Dear Rasmus,
Quoted 8 lines · In message <[email protected]> you wrote:
Quoted 7 lines
Quoted 4 lines
Not in a none standard way! Instead you can define more than one environment storage devices and load them in a board specific order (defined thorugh board specfif function
env_get_location())Yes, agreed. But this logically impossible if there is no storage at all, which is what
CONFIG_ENV_IS_NOWHEREsays.
Quoted 7 lines
Quoted 2 lines
Then should all the current config options
CONFIG_ENV_IS_be renamed toCONFIG_ENV_MAY_BE_? Because that's really what they mean.This is not correct.
The
CONFIG_ENV_IS_FOOmeans: if you use "env save", then U-Boot will write the config to external storage using the FOO storage device.
Wolfgang, you're wrong. What you're saying was once true, when the location was a "choice" in Kconfig, but it hasn't been that since fb69464eae. Nowadays one can select multiple possible backends, and only one of them will be used when doing "env save".
Later (208bd2b8), _NOWHERE was made non-mutually-exclusive with the real storage targets.
Quoted 2 lines
If you define
CONFIG_ENV_IS_NOWHERE, I would for example expect that all "env save" related code is omitted as we will never need it.
I haven't checked, but that functionality does seem to exist - not depending on whether CONFIG_ENV_IS_NOWHERE is not selected, but whether any of the CONFIG_ENV_IS_<somehere> is. See the ENV_IS_IN_DEVICE logic in cmd/nvedit.c. So if you select CONFIG_ENV_IS_NOWHERE and not any of the others, I think the build works as you'd expect.
Rasmus
PATCH 1/1 env: env_sf: don't set .init op if not needed
Quoted 20 lines · Rasmus Villemoes
Quoted 11 lines · Wolfgang Denk
Dear Rasmus,
Quoted 8 lines · In message <[email protected]> you wrote:
Quoted 7 lines
Quoted 4 lines
Not in a none standard way! Instead you can define more than one environment storage devices and load them in a board specific order (defined thorugh board specfif function
env_get_location())Yes, agreed. But this logically impossible if there is no storage at all, which is what
CONFIG_ENV_IS_NOWHEREsays.Quoted 7 lines
Quoted 2 lines
Then should all the current config options
CONFIG_ENV_IS_be renamed toCONFIG_ENV_MAY_BE_? Because that's really what they mean.This is not correct.
The
CONFIG_ENV_IS_FOOmeans: if you use "env save", then U-Boot will write the config to external storage using the FOO storage device.
Quoted 7 lines
Wolfgang, you're wrong. What you're saying was once true, when the location was a "choice" in
Kconfig, but it hasn't been that sincefb69464eae. Nowadays one can select multiple possible backends, and only one of them will be used when doing "env save".Later (
208bd2b8),_NOWHEREwas made non-mutually-exclusive with the real storage targets.
Yes. It's intentional that "NOWHERE" means that if this is our run-time location for the environment, then you cannot save the environment. But since we finally implemented the ability to have more than one option enabled and pick the correct one at run time, we build both "mmc" and "nowhere".
Quoted 8 lines
Quoted 2 lines
If you define
CONFIG_ENV_IS_NOWHERE, I would for example expect that all "env save" related code is omitted as we will never need it.I haven't checked, but that functionality does seem to exist - not depending on whether
CONFIG_ENV_IS_NOWHEREis not selected, but whether any of the CONFIG_ENV_IS_<somehere> is. See theENV_IS_IN_DEVICElogic incmd/nvedit.c. So if you selectCONFIG_ENV_IS_NOWHEREand not any of the others, I think the build works as you'd expect.
So, CMD_SAVEENV exists. If you don't enable that, I would expect save-related code that can be garbage collected to be discarded. It's unclear without further digging if there's code that could be discarded that is not, but checking the map file for a "nowhere" only build would probably be somewhat instructive.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20201106/b4a1c4be/attachment.sig>
PATCH 1/1 env: env_sf: don't set .init op if not needed
Dear Tom,
Quoted 9 lines · In message <20201106204557.GG5340@bill-the-cat> you wrote:
Quoted 3 lines
Later (
208bd2b8),_NOWHEREwas made non-mutually-exclusive with the real storage targets.Yes. It's intentional that "NOWHERE" means that if this is our run-time location for the environment, then you cannot save the environment. But since we finally implemented the ability to have more than one option enabled and pick the correct one at run time, we build both "mmc" and "nowhere".
But this breaks logic. If you wanna have a nulldev, than implement a /dev/null.
CONFIG_ENV_IS_NOWHERE should be the means to be used when no environment storage drivers are needed / selected, not even /dev/null.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de My challenge to the goto-less programmer is to recode tcp_input() without any gotos ... without any loss of efficiency (there has to be a catch). - W. R. Stevens
PATCH 1/1 env: env_sf: don't set .init op if not needed
In reply to Rasmus VillemoesDear Rasmus,
Quoted 8 lines · In message <[email protected]> you wrote:
Quoted 3 lines
The
CONFIG_ENV_IS_FOOmeans: if you use "env save", then U-Boot will write the config to external storage using the FOO storage device.Wolfgang, you're wrong. What you're saying was once true, when the location was a "choice" in
Kconfig, but it hasn't been that sincefb69464eae. Nowadays one can select multiple possible backends, and only one of them will be used when doing "env save".
I know that. But that slection is made from the selected drivers enabled by the CONFIG_ENV_IS_* settings.
Quoted 2 lines
Later (
208bd2b8),_NOWHEREwas made non-mutually-exclusive with the real storage targets.
And this is a buf that should be fixed, as it makes no sense at all.
Quoted 8 lines
Quoted 2 lines
If you define
CONFIG_ENV_IS_NOWHERE, I would for example expect that all "env save" related code is omitted as we will never need it.I haven't checked, but that functionality does seem to exist - not depending on whether
CONFIG_ENV_IS_NOWHEREis not selected, but whether any of the CONFIG_ENV_IS_<somehere> is. See theENV_IS_IN_DEVICElogic incmd/nvedit.c. So if you selectCONFIG_ENV_IS_NOWHEREand not any of the others, I think the build works as you'd expect.
This is intransparent and error prone. This check must not be implemented somewhere in the code, but at Kconfig level.
Best regards,
Wolfgang Denk
Signature · 7 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Bugs are by far the largest and most successful class of
entity, with nearly a million known species. In this res-
pect they outnumber all the other known creatures about
four to one. -- Professor Snope's Encyclopedia of AnimalPATCH 1/1 env: env_sf: don't set .init op if not needed
In reply to Heiko SchocherAm 2020-11-02 08:00, schrieb Heiko Schocher:
Quoted 92 lines
Hello Michael,
Am 01.11.2020 um 14:38 schrieb Michael Walle:
Quoted 44 lines
Commit
92765f45bb95("env: Access Environment in SPI flashes before relocation") at least breaks the Kontron sl28 board. I guess it also breaks others which use a (late) SPI environment.Unfortunately, we cannot set the .init op and fall back to the same behavior as it would be unset. Thus guard the .init op by #if's.
Fixes 92765f45bb95 ("env: Access Environment in SPI flashes beforerelocation")
Signed-off-by Michael Walle <[email protected]>--- env/sf.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-)env/sf.c +8
-2@@ -385,7 +385,7 @@ out: }#endif -static int env_sf_init(void) +static int__maybe_unused env_sf_init (void) {#if defined(INITENV ) && (CONFIG_ENV_ADDR !=0x0 )return env_sf_init_addr ();@@ -393,8 +393,13 @@ static int env_sf_init(void)return env_sf_init_early ();#endif /* -* we must return with 0 if there is nothing done, -* else env_set_inited() get not called in env_init() +* We shouldn't end up here. Unfortunately, there is no +* way to return a value which yields the same behavior +* as if the .init op wouldn't be set at all. See +* env_init(); env_set_inited() is only called if we +* return 0, but the default environment is only loaded +* if -ENOENT is returned. Therefore, we need the ugly +* ifdeferry for the .init op. */ return 0 ; }env/sf.c U_BOOT_ENV_LOCATION(sf) = {
Quoted 9 lines
env/sf.c +2
-0@@ -404,5 +409,7 @@ U_BOOT_ENV_LOCATION(sf) = {ENV_NAME ("SPIFlash" ) .load = env_sf_load, .save =CONFIG_IS_ENABLED (SAVEENV ) ?ENV_SAVE_PTR (env_sf_save) :NULL , +#if (defined(INITENV) && (CONFIG_ENV_ADDR != 0x0)) ||defined (CONFIG_ENV_SPI_EARLY ) .init = env_sf_init, +#endif };Ok, tested this patch on an imx6 based board with SPI NOR and it works.
But.... there is a problem with environment in spi nor and
ENV_APPENDenabled, with current implementation (also before my patches applied):I enabled now
ENV_APPENDon this board and
CONFIG_ENV_IS_NOWHERECONFIG_ENV_IS_IN_SPI_FLASHand the Environment from SPI NOR never loaded as
gd->env_validis alwaysENV_INVALIDandenv_load()never called fromenv_relocate().What do you think about following patch:
env/sf.c +6
-2@@ -393,9 +393,13 @@ static int env_sf_init(void)return env_sf_init_early ();#endif /* -* we must return with 0 if there is nothing done, -* else env_set_inited() get not called in env_init() +* We must return with 0 if there is nothing done, +* to get inited bit set in env_init(). +* We need to set env_valid to ENV_VALID, so later +* env_load() loads the Environment from SPI NOR. */ + gd->env_addr = (ulong)&default_environment[0 ]; + gd->env_valid =ENV_VALID ;return 0 ; }
Quoted 1 line
Can you try it?
This works for me...
Quoted 30 lines
Another option would be to reutrn
-ENOENTand set init bit also when a init function returns-ENOENT:env/env.c +2
-0@@ -329,6 +329,8 @@ int env_init(void)for (prio =0 ; (drv =env_driver_lookup (ENVOP_INIT , prio)); prio++) {if (!drv->init || !(ret = drv->init ()))env_set_inited (drv->location); +if (ret == -ENOENT ) +env_set_inited (drv->location); debug("%s: Environment %s init done (ret=%d)\n",
__func__,drv->name, ret);env/sf.c +1
-1@@ -396,7 +396,7 @@ static int env_sf_init(void)* we must return with 0 if there is nothing done, * else env_set_inited() get not called in env_init() */ -return 0 ; +return -ENOENT ; }
Quoted 3 lines
But this may has impact on other environment drivers ... but may is the cleaner approach as
env_init()later sets the default environment if ret is-ENOENT...
.. and also this.
So we have four solutions
(1) revert the series
(2) apply my patch
(3) use the first solution from Heiko
(4) use the second solution from Heiko
I'm fine with all four. If it will be (3) or (4) will you prepare a patch, Heiko?
-michael
PATCH 1/1 env: env_sf: don't set .init op if not needed
Hello Michael,
Am 02.11.2020 um 21:15 schrieb Michael Walle:
Quoted 128 lines
Am 2020-11-02 08:00, schrieb Heiko Schocher:
Quoted 89 lines
Hello Michael,
Am 01.11.2020 um 14:38 schrieb Michael Walle:
Quoted 43 lines
Commit
92765f45bb95("env: Access Environment in SPI flashes before relocation") at least breaks the Kontron sl28 board. I guess it also breaks others which use a (late) SPI environment.Unfortunately, we cannot set the .init op and fall back to the same behavior as it would be unset. Thus guard the .init op by #if's.
Fixes 92765f45bb95 ("env: Access Environment in SPI flashes before relocation")Signed-off-by Michael Walle <[email protected]>---
?env/sf.c| 13 ++++++++++---
? 1 file changed, 10 insertions(+), 3 deletions(-)env/sf.c +0
-0@@ -385,7 +385,7 @@ out: ? }? #endif
? -static intenv_sf_init(void)
+static int__maybe_unusedenv_sf_init(void)? {
? #if defined(INITENV) && (CONFIG_ENV_ADDR!=0x0) ????? returnenv_sf_init_addr();env/sf.c +0
-0@@ -393,8 +393,13 @@ static int env_sf_init(void) ????? return env_sf_init_early();? #endif
????? /*
-???? * we must return with 0 if there is nothing done, -???? * elseenv_set_inited()get not called inenv_init()+???? * We shouldn't end up here. Unfortunately, there is no +???? * way to return a value which yields the same behavior +???? * as if the .init op wouldn't be set at all. See +???? *env_init();env_set_inited()is only called if we +???? * return 0, but the default environment is only loaded +???? * if-ENOENTis returned. Therefore, we need the ugly +???? * ifdeferry for the .init op.
?????? */
????? return 0;
? }env/sf.c U_BOOT_ENV_LOCATION(sf) = { · line 415
Quoted 7 lines
env/sf.c +2
-0@@ -404,5 +409,7 @@ U_BOOT_ENV_LOCATION(sf) = { ????? ENV_NAME("SPIFlash") ????? .load??????? = env_sf_load, ????? .save??????? = CONFIG_IS_ENABLED(SAVEENV) ? ENV_SAVE_PTR(env_sf_save) : NULL, +#if (defined(INITENV) && (CONFIG_ENV_ADDR != 0x0)) || defined(CONFIG_ENV_SPI_EARLY) ????? .init??????? = env_sf_init, +#endif ? };Ok, tested this patch on an imx6 based board with SPI NOR and it works.
But.... there is a problem with environment in spi nor and
ENV_APPENDenabled, with current implementation (also before my patches applied):I enabled now
ENV_APPENDon this board and
CONFIG_ENV_IS_NOWHERECONFIG_ENV_IS_IN_SPI_FLASHand the Environment from SPI NOR never loaded as
gd->env_validis alwaysENV_INVALIDandenv_load()never called fromenv_relocate().What do you think about following patch:
env/sf.c +0
-0@@ -393,9 +393,13 @@ static int env_sf_init(void) ??????? return env_sf_init_early();?#endif
??????? /*
-??????? * we must return with 0 if there is nothing done, -??????? * elseenv_set_inited()get not called inenv_init()+??????? * We must return with 0 if there is nothing done, +??????? * to get inited bit set inenv_init(). +??????? * We need to setenv_validtoENV_VALID, so later +??????? *env_load()loads the Environment from SPI NOR. ???????? */
+??????gd->env_addr= (ulong)&default_environment[0]; +??????gd->env_valid=ENV_VALID;
??????? return 0;
?}Quoted 1 line
Can you try it?
This works for me...
Quoted 28 lines
Another option would be to reutrn
-ENOENTand set init bit also when a init function returns-ENOENT:env/env.c +2
-0@@ -329,6 +329,8 @@ int env_init(void) ??????? for (prio = 0; (drv = env_driver_lookup(ENVOP_INIT, prio)); prio++) { ??????????????? if (!drv->init || !(ret = drv->init())) ??????????????????????? env_set_inited(drv->location); +?????????????? if (ret == -ENOENT) +?????????????????????? env_set_inited(drv->location); ??????????????? debug("%s: Environment %s init done (ret=%d)\n", __func__, ????????????????????? drv->name, ret);env/sf.c +0
-0@@ -396,7 +396,7 @@ static int env_sf_init(void) ???????? * we must return with 0 if there is nothing done, ???????? * else env_set_inited() get not called in env_init()???????? */
-?????? return 0;
+?????? return-ENOENT;
?}Quoted 3 lines
But this may has impact on other environment drivers ... but may is the cleaner approach as
env_init()later sets the default environment if ret is-ENOENT..... and also this.
Quoted 8 lines
So we have four solutions
(1) revert the series
(2) apply my patch
(3) use the first solution from Heiko
(4) use the second solution from HeikoI'm fine with all four. If it will be (3) or (4) will you prepare a patch, Heiko?
I tend to implement solution [4] ... I can send a patch...
Simon? Tom? Any suggestions?
bye,
Heiko
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de
PATCH 1/1 env: env_sf: don't set .init op if not needed
Quoted 137 lines · Heiko Schocher
Hello Michael,
Am 02.11.2020 um 21:15 schrieb Michael Walle:
Quoted 134 lines
Am 2020-11-02 08:00, schrieb Heiko Schocher:
Quoted 89 lines
Hello Michael,
Am 01.11.2020 um 14:38 schrieb Michael Walle:
Quoted 43 lines
Commit
92765f45bb95("env: Access Environment in SPI flashes before relocation") at least breaks the Kontron sl28 board. I guess it also breaks others which use a (late) SPI environment.Unfortunately, we cannot set the .init op and fall back to the same behavior as it would be unset. Thus guard the .init op by #if's.
Fixes 92765f45bb95 ("env: Access Environment in SPI flashes before relocation")Signed-off-by Michael Walle <[email protected]>---
?env/sf.c| 13 ++++++++++---
? 1 file changed, 10 insertions(+), 3 deletions(-)env/sf.c +0
-0@@ -385,7 +385,7 @@ out: ? }? #endif
? -static intenv_sf_init(void)
+static int__maybe_unusedenv_sf_init(void)? {
? #if defined(INITENV) && (CONFIG_ENV_ADDR!=0x0) ????? returnenv_sf_init_addr();env/sf.c +0
-0@@ -393,8 +393,13 @@ static int env_sf_init(void) ????? return env_sf_init_early();? #endif
????? /*
-???? * we must return with 0 if there is nothing done, -???? * elseenv_set_inited()get not called inenv_init()+???? * We shouldn't end up here. Unfortunately, there is no +???? * way to return a value which yields the same behavior +???? * as if the .init op wouldn't be set at all. See +???? *env_init();env_set_inited()is only called if we +???? * return 0, but the default environment is only loaded +???? * if-ENOENTis returned. Therefore, we need the ugly +???? * ifdeferry for the .init op.
?????? */
????? return 0;
? }env/sf.c U_BOOT_ENV_LOCATION(sf) = { · line 415
Quoted 7 lines
env/sf.c +2
-0@@ -404,5 +409,7 @@ U_BOOT_ENV_LOCATION(sf) = { ????? ENV_NAME("SPIFlash") ????? .load??????? = env_sf_load, ????? .save??????? = CONFIG_IS_ENABLED(SAVEENV) ? ENV_SAVE_PTR(env_sf_save) : NULL, +#if (defined(INITENV) && (CONFIG_ENV_ADDR != 0x0)) || defined(CONFIG_ENV_SPI_EARLY) ????? .init??????? = env_sf_init, +#endif ? };Ok, tested this patch on an imx6 based board with SPI NOR and it works.
But.... there is a problem with environment in spi nor and
ENV_APPENDenabled, with current implementation (also before my patches applied):I enabled now
ENV_APPENDon this board and
CONFIG_ENV_IS_NOWHERECONFIG_ENV_IS_IN_SPI_FLASHand the Environment from SPI NOR never loaded as
gd->env_validis alwaysENV_INVALIDandenv_load()never called fromenv_relocate().What do you think about following patch:
env/sf.c +0
-0@@ -393,9 +393,13 @@ static int env_sf_init(void) ??????? return env_sf_init_early();?#endif
??????? /*
-??????? * we must return with 0 if there is nothing done, -??????? * elseenv_set_inited()get not called inenv_init()+??????? * We must return with 0 if there is nothing done, +??????? * to get inited bit set inenv_init(). +??????? * We need to setenv_validtoENV_VALID, so later +??????? *env_load()loads the Environment from SPI NOR. ???????? */
+??????gd->env_addr= (ulong)&default_environment[0]; +??????gd->env_valid=ENV_VALID;
??????? return 0;
?}Quoted 1 line
Can you try it?
This works for me...
Quoted 28 lines
Another option would be to reutrn
-ENOENTand set init bit also when a init function returns-ENOENT:env/env.c +2
-0@@ -329,6 +329,8 @@ int env_init(void) ??????? for (prio = 0; (drv = env_driver_lookup(ENVOP_INIT, prio)); prio++) { ??????????????? if (!drv->init || !(ret = drv->init())) ??????????????????????? env_set_inited(drv->location); +?????????????? if (ret == -ENOENT) +?????????????????????? env_set_inited(drv->location); ??????????????? debug("%s: Environment %s init done (ret=%d)\n", __func__, ????????????????????? drv->name, ret);env/sf.c +0
-0@@ -396,7 +396,7 @@ static int env_sf_init(void) ???????? * we must return with 0 if there is nothing done, ???????? * else env_set_inited() get not called in env_init()???????? */
-?????? return 0;
+?????? return-ENOENT;
?}Quoted 3 lines
But this may has impact on other environment drivers ... but may is the cleaner approach as
env_init()later sets the default environment if ret is-ENOENT..... and also this.
So we have four solutions
(1) revert the series
(2) apply my patch
(3) use the first solution from Heiko
(4) use the second solution from Heiko
Quoted 6 lines
Quoted 2 lines
I'm fine with all four. If it will be (3) or (4) will you prepare a patch, Heiko?
I tend to implement solution [4] ... I can send a patch...
Simon? Tom? Any suggestions?
Lets go with #4 above then please, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20201103/4235ae21/attachment.sig>