show being-loaded/being-unloaded indicator for modules
this looks very useful!
Quoted 2 lines
Unfortunatly, it's not always easy to see directly which module is being loaded/unloaded from the oops itself.
no wonder, as most modules seem to be very quiet on on load/unload.
some days ago i was curious how "consistent" modules would leave messages in syslog load/unload. this is why i made a little statistic on that.
i`d like to share the essential part here (can provide more details if you like):
on load, 1204 on unload, 1655 (out of 2088) left absoultely _no_ message in syslog
example:
3c359 - silence
3c501 - silence
3c503 - 2 lines on load, 0 on unload
3c505 - 3 lines on load, 0 on unload
3c507 - silence
3c509 - silence
3c515 - 1 line on load, 0 on unload
3c574_cs - silence
3c589_cs - silence
3c59x - silence
ok, this is not too reliable, because modules might act differently if they find appropriate hardware.
but i wonder if some mandatory "print a message on init/exit" wouldn`t give a benefit to admins or end-users, too. sure this would additionally clutter up syslog, but it would add transparency.
if modules can print informations like credits, email-adresses and path-to-the-source-files, why not some mandatory message on load/unload then....
Quoted 20 lines
List: linux-kernel Subject: [patch 1/2] show being-loaded/being-unloaded indicator for modules From: Arjan van de Ven <arjan () infradead ! org> Date: 2008-01-06 23:18:50 Message-ID: 20080106151850.3eab58b0 () laptopd505 ! fenrus ! org[Download message RAW]
Subject: show being-loaded/being-unloaded indicator for modules in oopses
From: Arjan van de Ven <[email protected]>
CC: [email protected]
CC: [email protected]
CC: [email protected]It's rather common that an oops/WARN_ON/BUG happens during the load or unload of a module. Unfortunatly, it's not always easy to see directly which module is being loaded/unloaded from the oops itself. Worse, it's not even always possible to ask the bug reporter, since there are so many components (udev etc) that auto-load modules that there's a good chance that even the reporter doesn't know which module this is.
Quoted 7 lines
This patch extends the existing "show if it's tainting" print code, which is used as part of printing the modules in the oops/BUG/WARN_ON to include a "+" for "being loaded" and a "-" for "being unloaded".
As a result this extension, the "
taint_flags()" function gets renamed to "module_flags()" (and takes a module struct as argument, not a taint flags int).
_____________________________________________________________________
Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
http://smartsurfer.web.de/?mc=100071&distributionid=000000000066
Quoted 5 lines · On Mon, 07 Jan 2008 11:09:23 +0100 [email protected] wrote:
this looks very useful!
Quoted 2 lines
Unfortunatly, it's not always easy to see directly which module is being loaded/unloaded from the oops itself.
Quoted 8 lines
no wonder, as most modules seem to be very quiet on on load/unload.
but i wonder if some mandatory "print a message on init/exit" wouldn`t give a benefit to admins or end-users, too. sure this would additionally clutter up syslog, but it would add transparency.
Regardless of the usefulness, really, if this would be mandatory for all modules, it should be done in the module loader itself....
But I'm not entirely convinced how useful that is to do always, although I can see the point of having it as debug option, similar to the initcall debug stuff...
Signature · 3 lines
If you want to reach me at my work email, use [email protected] For development, discussion and tips for power savings, visit http://www.lesswatts.org
Quoted 17 lines · On Tuesday 08 January 2008 01:21:16 Arjan van de Ven wrote:
On Mon, 07 Jan 2008 11:09:23 +0100
Quoted 5 lines · [email protected] wrote:
this looks very useful!
Quoted 2 lines
Unfortunatly, it's not always easy to see directly which module is being loaded/unloaded from the oops itself.
Quoted 8 lines
no wonder, as most modules seem to be very quiet on on load/unload.
but i wonder if some mandatory "print a message on init/exit" wouldn`t give a benefit to admins or end-users, too. sure this would additionally clutter up syslog, but it would add transparency.
Quoted 5 lines
Regardless of the usefulness, really, if this would be mandatory for all modules, it should be done in the module loader itself....
But I'm not entirely convinced how useful that is to do always, although I can see the point of having it as debug option, similar to the initcall debug stuff...
We could overload initcall_debug for this if we wanted to be consistant. But I'm just not sure it'd be clear when to turn it on...
Rusty.
Quoted 1 line · On Mon, 07 Jan 2008 11:09:23 +0100, [email protected] said:
but i wonder if some mandatory "print a message on init/exit
With a 'printk(LOG_DEBUG,...' please. Boot with initcall_debug sometime to see why. ;)