Skip to contentSkip to conversation

arm64: armv8_deprecated: Fix undef_hook mask for thumb setend

PATCH Superseded Fredrik Strupe 3 participants 10 messages Apr 6, 2020 – Apr 8, 2020 arm64

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: armv8_deprecated: Fix undef_hook mask for thumb setend

Use a full 32-bit mask to prevent accidental matchings of thumb32 instructions where the second half-word is equal to the thumb16 setend encoding.

This fixes the same problem as the following patch:

    https://lkml.org/lkml/2020/3/16/341

but for setend emulation instead.

---
 arch/arm64/kernel/armv8_deprecated.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/kernel/armv8_deprecated.c +1 -1
index 9d3442d62..8c06dfee0 100644
@@ -609,7 +609,7 @@ static struct undef_hook setend_hooks[] = {
 	},
 	{
 		/* Thumb mode */
-		.instr_mask	= 0x0000fff7,
+		.instr_mask	= 0xfffffff7,
 		.instr_val	= 0x0000b650,
 		.pstate_mask	= (PSR_AA32_T_BIT | PSR_AA32_MODE_MASK),
 		.pstate_val	= (PSR_AA32_T_BIT | PSR_AA32_MODE_USR),
Signature · 1 line
2.20.1
maintainer
#1 lore raw
Quoted 7 lines · Fredrik Strupe

Use a full 32-bit mask to prevent accidental matchings of thumb32 instructions where the second half-word is equal to the thumb16 setend encoding.

This fixes the same problem as the following patch:

    https://lkml.org/lkml/2020/3/16/341

This link is not guaranteed to be stable and the commit should have the full description rather than referring to another email.

Quoted 3 lines

but for setend emulation instead.

It also needs Fixes: and Cc: stable tags.

Quoted 9 lines
---
 arch/arm64/kernel/armv8_deprecated.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/kernel/armv8_deprecated.c +0 -0
index 9d3442d62..8c06dfee0 100644

arch/arm64/kernel/armv8_deprecated.c static struct undef_hook setend_hooks[] = { · line 613

Quoted 6 lines
arch/arm64/kernel/armv8_deprecated.c +1 -1
@@ -609,7 +609,7 @@ static struct undef_hook setend_hooks[] = {
 	},
 	{
 		/* Thumb mode */
-		.instr_mask	= 0x0000fff7,
+		.instr_mask	= 0xfffffff7,
 		.instr_val	= 0x0000b650,

I can see how this could happen but it would be useful to provide a concrete example in the commit log.

The instruction opcode built by call_undef_hook() first reads a u16 as a T16 instruction and the above should be fine. However, if this looks like a T32 opcode, it reads a subsequent u16 which becomes the lowest half-word and the above mask/val may inadvertently match it.

The patch looks fine to me as long as you update the commit log.

Thanks.

Signature · 1 line
Catalin
#2 lore raw
Quoted 37 lines · Catalin Marinas
Quoted 7 lines · Fredrik Strupe

Use a full 32-bit mask to prevent accidental matchings of thumb32 instructions where the second half-word is equal to the thumb16 setend encoding.

This fixes the same problem as the following patch:

     https://lkml.org/lkml/2020/3/16/341

This link is not guaranteed to be stable and the commit should have the full description rather than referring to another email.

Quoted 3 lines

but for setend emulation instead.

It also needs Fixes: and Cc: stable tags.

Quoted 9 lines
---
  arch/arm64/kernel/armv8_deprecated.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/kernel/armv8_deprecated.c +0 -0
index 9d3442d62..8c06dfee0 100644

arch/arm64/kernel/armv8_deprecated.c static struct undef_hook setend_hooks[] = { · line 613

Quoted 6 lines
arch/arm64/kernel/armv8_deprecated.c +1 -1
@@ -609,7 +609,7 @@ static struct undef_hook setend_hooks[] = {
  	},
  	{
  		/* Thumb mode */
-		.instr_mask	= 0x0000fff7,
+		.instr_mask	= 0xfffffff7,
  		.instr_val	= 0x0000b650,

I can see how this could happen but it would be useful to provide a concrete example in the commit log.

Quoted 5 lines

The instruction opcode built by call_undef_hook() first reads a u16 as a T16 instruction and the above should be fine. However, if this looks like a T32 opcode, it reads a subsequent u16 which becomes the lowest half-word and the above mask/val may inadvertently match it.

We also do a check on the pstate_val, along with the instr_val to confirm the mode. So this should be fine as it is ?

Suzuki

#3 lore raw
Quoted 38 lines · Suzuki K Poulose
Quoted 37 lines · Catalin Marinas
Quoted 7 lines · Fredrik Strupe

Use a full 32-bit mask to prevent accidental matchings of thumb32 instructions where the second half-word is equal to the thumb16 setend encoding.

This fixes the same problem as the following patch:

     https://lkml.org/lkml/2020/3/16/341

This link is not guaranteed to be stable and the commit should have the full description rather than referring to another email.

Quoted 3 lines

but for setend emulation instead.

It also needs Fixes: and Cc: stable tags.

Quoted 9 lines

---
  arch/arm64/kernel/armv8_deprecated.c | 2 +-

  1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/kernel/armv8_deprecated.c +0 -0
index 9d3442d62..8c06dfee0 100644

arch/arm64/kernel/armv8_deprecated.c static struct undef_hook setend_hooks[] = { · line 613

Quoted 6 lines
arch/arm64/kernel/armv8_deprecated.c +1 -1
@@ -609,7 +609,7 @@ static struct undef_hook setend_hooks[] = {
       },
       {
           /* Thumb mode */
-        .instr_mask    = 0x0000fff7,
+        .instr_mask    = 0xfffffff7,
           .instr_val    = 0x0000b650,

I can see how this could happen but it would be useful to provide a concrete example in the commit log.

Quoted 5 lines
Quoted 5 lines

The instruction opcode built by call_undef_hook() first reads a u16 as a T16 instruction and the above should be fine. However, if this looks like a T32 opcode, it reads a subsequent u16 which becomes the lowest half-word and the above mask/val may inadvertently match it.

Thanks for the feedback. I have updated the patch with the requested changes.

Quoted 5 lines

We also do a check on the pstate_val, along with the instr_val to confirm the mode. So this should be fine as it is ?

Suzuki

pstate_val only indicates thumb execution, not whether the current instruction is a T16 or T32 instruction.

Fredrik

--- For thumb instructions, call_undef_hook() in traps.c first reads a u16, and if the u16 indicates a T32 instruction (u16 >= 0xe800), a second u16 is read, which then makes up the the lower half-word of a T32 instruction. For T16 instructions, the second u16 is not read, which makes the resulting u32 opcode always have the upper half set to 0. However, having the upper half of instr_mask in the undef_hook set to 0 masks out the upper half of all thumb instructions - both T16 and T32. This results in trapped T32 instructions with the lower half-word equal to the T16 encoding of setend (b650) being matched, even though the upper half-word is not 0000 and thus indicates a T32 opcode. An example of such a T32 instruction is eaa0b650, which should raise a SIGILL since T32 instructions with an eaa prefix are unallocated as per Arm ARM, but instead works as a SETEND because the second half-word is set to b650. This patch fixes the issue by extending instr_mask to include the upper u32 half, which will still match T16 instructions where the upper half is 0, but not T32 instructions. Signed-off-by: Fredrik Strupe <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Fixes: 2d888f48e056 ("arm64: Emulate SETEND for AArch32 tasks") --- arch/arm64/kernel/armv8_deprecated.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/kernel/armv8_deprecated.c b/arch/arm64/kernel/armv8_deprecated.c index 9d3442d62..8c06dfee0 100644 --- a/arch/arm64/kernel/armv8_deprecated.c +++ b/arch/arm64/kernel/armv8_deprecated.c @@ -609,7 +609,7 @@ static struct undef_hook setend_hooks[] = { }, { /* Thumb mode */ - .instr_mask = 0x0000fff7, + .instr_mask = 0xfffffff7, .instr_val = 0x0000b650, .pstate_mask = (PSR_AA32_T_BIT | PSR_AA32_MODE_MASK), .pstate_val = (PSR_AA32_T_BIT | PSR_AA32_MODE_USR), -- 2.20.1

#4 lore raw
In reply to Suzuki K Poulose
Quoted 38 lines · Suzuki K Poulose
Quoted 37 lines · Catalin Marinas
Quoted 7 lines · Fredrik Strupe

Use a full 32-bit mask to prevent accidental matchings of thumb32 instructions where the second half-word is equal to the thumb16 setend encoding.

This fixes the same problem as the following patch:

     https://lkml.org/lkml/2020/3/16/341

This link is not guaranteed to be stable and the commit should have the full description rather than referring to another email.

Quoted 3 lines

but for setend emulation instead.

It also needs Fixes: and Cc: stable tags.

Quoted 9 lines

---
  arch/arm64/kernel/armv8_deprecated.c | 2 +-

  1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/kernel/armv8_deprecated.c +0 -0
index 9d3442d62..8c06dfee0 100644

arch/arm64/kernel/armv8_deprecated.c static struct undef_hook setend_hooks[] = { · line 613

Quoted 6 lines
arch/arm64/kernel/armv8_deprecated.c +1 -1
@@ -609,7 +609,7 @@ static struct undef_hook setend_hooks[] = {
       },
       {
           /* Thumb mode */
-        .instr_mask    = 0x0000fff7,
+        .instr_mask    = 0xfffffff7,
           .instr_val    = 0x0000b650,

I can see how this could happen but it would be useful to provide a concrete example in the commit log.

Quoted 6 lines
Quoted 5 lines

The instruction opcode built by call_undef_hook() first reads a u16 as a T16 instruction and the above should be fine. However, if this looks like a T32 opcode, it reads a subsequent u16 which becomes the lowest half-word and the above mask/val may inadvertently match it.

Thanks for the feedback. I have updated the patch with the requested changes.

Quoted 4 lines

We also do a check on the pstate_val, along with the instr_val to confirm the mode. So this should be fine as it is ?

Suzuki

pstate_val only indicates thumb execution, not whether the current instruction is a T16 or T32 instruction.

(Sorry for duplicate, something went terribly wrong with the formatting of the previous email.)

Fredrik

---
For thumb instructions, call_undef_hook() in traps.c first reads a u16, and if the u16 indicates a T32 instruction (u16 >= 0xe800), a second u16 is read, which then makes up the the lower half-word of a T32 instruction. For T16 instructions, the second u16 is not read, which makes the resulting u32 opcode always have the upper half set to 0.

However, having the upper half of instr_mask in the undef_hook set to 0 masks out the upper half of all thumb instructions - both T16 and T32. This results in trapped T32 instructions with the lower half-word equal to the T16 encoding of setend (b650) being matched, even though the upper half-word is not 0000 and thus indicates a T32 opcode.

An example of such a T32 instruction is eaa0b650, which should raise a SIGILL since T32 instructions with an eaa prefix are unallocated as per Arm ARM, but instead works as a SETEND because the second half-word is set to b650.

This patch fixes the issue by extending instr_mask to include the upper u32 half, which will still match T16 instructions where the upper half is 0, but not T32 instructions.

Cc Catalin Marinas <[email protected]>
Cc Will Deacon <[email protected]>
Fixes 2d888f48e056 ("arm64: Emulate SETEND for AArch32 tasks")

---
 arch/arm64/kernel/armv8_deprecated.c | 2 +-

 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/kernel/armv8_deprecated.c +0 -0
index 9d3442d62..8c06dfee0 100644
@@ -609,7 +609,7 @@ static struct undef_hook setend_hooks[] = {

     },
     {
         /* Thumb mode */
-        .instr_mask    = 0x0000fff7,
+        .instr_mask    = 0xfffffff7,
         .instr_val    = 0x0000b650,
         .pstate_mask    = (PSR_AA32_T_BIT | PSR_AA32_MODE_MASK), .pstate_val    = (PSR_AA32_T_BIT | PSR_AA32_MODE_USR),

Signature · 1 line
2.20.1
maintainer
#5 lore raw
Quoted 2 lines · Fredrik Strupe

(Sorry for duplicate, something went terribly wrong with the formatting of the previous email.)

It's still wrong here with tabs converted to spaces. The patch doesn't apply. Could you please send the patch separately as a v2? It looks fine otherwise.

Thanks.

Signature · 1 line
Catalin
#6 lore raw
Quoted 10 lines · Catalin Marinas
Quoted 2 lines · Fredrik Strupe

(Sorry for duplicate, something went terribly wrong with the formatting of the previous email.)

It's still wrong here with tabs converted to spaces. The patch doesn't apply. Could you please send the patch separately as a v2? It looks fine otherwise.

Thanks.

Alright, let's hope third time's the charm.

Fredrik

---
For thumb instructions, call_undef_hook() in traps.c first reads a u16, and if the u16 indicates a T32 instruction (u16 >= 0xe800), a second u16 is read, which then makes up the the lower half-word of a T32 instruction. For T16 instructions, the second u16 is not read, which makes the resulting u32 opcode always have the upper half set to 0.

However, having the upper half of instr_mask in the undef_hook set to 0 masks out the upper half of all thumb instructions - both T16 and T32. This results in trapped T32 instructions with the lower half-word equal to the T16 encoding of setend (b650) being matched, even though the upper half-word is not 0000 and thus indicates a T32 opcode.

An example of such a T32 instruction is eaa0b650, which should raise a SIGILL since T32 instructions with an eaa prefix are unallocated as per Arm ARM, but instead works as a SETEND because the second half-word is set to b650.

This patch fixes the issue by extending instr_mask to include the upper u32 half, which will still match T16 instructions where the upper half is 0, but not T32 instructions.

Cc Catalin Marinas <[email protected]>
Cc Will Deacon <[email protected]>
Fixes 2d888f48e056 ("arm64: Emulate SETEND for AArch32 tasks")
---
 arch/arm64/kernel/armv8_deprecated.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/kernel/armv8_deprecated.c +1 -1
index 9d3442d62..8c06dfee0 100644
@@ -609,7 +609,7 @@ static struct undef_hook setend_hooks[] = {
 	},
 	{
 		/* Thumb mode */
-		.instr_mask	= 0x0000fff7,
+		.instr_mask	= 0xfffffff7,
 		.instr_val	= 0x0000b650,
 		.pstate_mask	= (PSR_AA32_T_BIT | PSR_AA32_MODE_MASK),
 		.pstate_val	= (PSR_AA32_T_BIT | PSR_AA32_MODE_USR),
Signature · 1 line
2.20.1
#7 lore raw

PATCH v2 1/1 arm64: armv8_deprecated: Fix undef_hook mask for thumb setend

For thumb instructions, call_undef_hook() in traps.c first reads a u16, and if the u16 indicates a T32 instruction (u16 >= 0xe800), a second u16 is read, which then makes up the the lower half-word of a T32 instruction. For T16 instructions, the second u16 is not read, which makes the resulting u32 opcode always have the upper half set to 0.

However, having the upper half of instr_mask in the undef_hook set to 0 masks out the upper half of all thumb instructions - both T16 and T32. This results in trapped T32 instructions with the lower half-word equal to the T16 encoding of setend (b650) being matched, even though the upper half-word is not 0000 and thus indicates a T32 opcode.

An example of such a T32 instruction is eaa0b650, which should raise a SIGILL since T32 instructions with an eaa prefix are unallocated as per Arm ARM, but instead works as a SETEND because the second half-word is set to b650.

This patch fixes the issue by extending instr_mask to include the upper u32 half, which will still match T16 instructions where the upper half is 0, but not T32 instructions.

Cc Catalin Marinas <[email protected]>
Cc Will Deacon <[email protected]>
Fixes 2d888f48e056 ("arm64: Emulate SETEND for AArch32 tasks")
---
 arch/arm64/kernel/armv8_deprecated.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/kernel/armv8_deprecated.c +1 -1
index 9d3442d62..8c06dfee0 100644
@@ -609,7 +609,7 @@ static struct undef_hook setend_hooks[] = {
 	},
 	{
 		/* Thumb mode */
-		.instr_mask	= 0x0000fff7,
+		.instr_mask	= 0xfffffff7,
 		.instr_val	= 0x0000b650,
 		.pstate_mask	= (PSR_AA32_T_BIT | PSR_AA32_MODE_MASK),
 		.pstate_val	= (PSR_AA32_T_BIT | PSR_AA32_MODE_USR),
Signature · 1 line
2.20.1
Reviewed-by on v2 1/1
#8 lore raw
Quoted 36 lines · Fredrik Strupe

For thumb instructions, call_undef_hook() in traps.c first reads a u16, and if the u16 indicates a T32 instruction (u16 >= 0xe800), a second u16 is read, which then makes up the the lower half-word of a T32 instruction. For T16 instructions, the second u16 is not read, which makes the resulting u32 opcode always have the upper half set to 0.

However, having the upper half of instr_mask in the undef_hook set to 0 masks out the upper half of all thumb instructions - both T16 and T32. This results in trapped T32 instructions with the lower half-word equal to the T16 encoding of setend (b650) being matched, even though the upper half-word is not 0000 and thus indicates a T32 opcode.

An example of such a T32 instruction is eaa0b650, which should raise a SIGILL since T32 instructions with an eaa prefix are unallocated as per Arm ARM, but instead works as a SETEND because the second half-word is set to b650.

This patch fixes the issue by extending instr_mask to include the upper u32 half, which will still match T16 instructions where the upper half is 0, but not T32 instructions.

Cc Catalin Marinas <[email protected]>
Cc Will Deacon <[email protected]>
Fixes 2d888f48e056 ("arm64: Emulate SETEND for AArch32 tasks")
---
  arch/arm64/kernel/armv8_deprecated.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/kernel/armv8_deprecated.c +0 -0
index 9d3442d62..8c06dfee0 100644

arch/arm64/kernel/armv8_deprecated.c static struct undef_hook setend_hooks[] = { · line 615

Quoted 8 lines
arch/arm64/kernel/armv8_deprecated.c +1 -1
@@ -609,7 +609,7 @@ static struct undef_hook setend_hooks[] = {
  	},
  	{
  		/* Thumb mode */
-		.instr_mask	= 0x0000fff7,
+		.instr_mask	= 0xfffffff7,
  		.instr_val	= 0x0000b650,
  		.pstate_mask	= (PSR_AA32_T_BIT | PSR_AA32_MODE_MASK),
  		.pstate_val	= (PSR_AA32_T_BIT | PSR_AA32_MODE_USR),
maintainer Applied
#9 lore raw
In reply to Fredrik Strupe
Quoted 18 lines · Fredrik Strupe

For thumb instructions, call_undef_hook() in traps.c first reads a u16, and if the u16 indicates a T32 instruction (u16 >= 0xe800), a second u16 is read, which then makes up the the lower half-word of a T32 instruction. For T16 instructions, the second u16 is not read, which makes the resulting u32 opcode always have the upper half set to 0.

However, having the upper half of instr_mask in the undef_hook set to 0 masks out the upper half of all thumb instructions - both T16 and T32. This results in trapped T32 instructions with the lower half-word equal to the T16 encoding of setend (b650) being matched, even though the upper half-word is not 0000 and thus indicates a T32 opcode.

An example of such a T32 instruction is eaa0b650, which should raise a SIGILL since T32 instructions with an eaa prefix are unallocated as per Arm ARM, but instead works as a SETEND because the second half-word is set to b650.

Quoted 8 lines

This patch fixes the issue by extending instr_mask to include the upper u32 half, which will still match T16 instructions where the upper half is 0, but not T32 instructions.

Cc Catalin Marinas <[email protected]>
Cc Will Deacon <[email protected]>
Fixes 2d888f48e056 ("arm64: Emulate SETEND for AArch32 tasks")

Queued for 5.7. Thanks.

Signature · 1 line
Catalin