problems with mpt fusion driver since 2.6.12-rc3
I get this on boot since -rc3 ... -rc2 worked fine. Is on a 4-way Newisys amd64 box.
Is this a known bug, or something new?
^M^@Fusion MPT base driver 3.01.20
^M^@Copyright (c) 1999-2004 LSI Logic Corporation
^M^@ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 27 (level, low) -> IRQ 27 ^M^@mptbase: Initiating ioc0 bringup
^M^@mptbase: ioc0: ERROR - Wait IOC_READY state timeout(15)! ^M^@mptbase: ioc0: ERROR - Enable Diagnostic mode FAILED! (00h) ^M^@mptbase: ioc0 NOT READY WARNING!
^M^@mptbase: WARNING - ioc0 did not initialize properly! (-1) ^M^@mptbase: probe of 0000:02:04.0 failed with error -1 ^M^@Fusion MPT SCSI Host driver 3.01.20
Re: problems with mpt fusion driver since 2.6.12-rc3 (amd64 ?)
Quoted 5 lines · --On Tuesday, May 17, 2005 16:07:14 -0700 "Martin J. Bligh"…
I get this on boot since -rc3 ... -rc2 worked fine. Is on a 4-way Newisys amd64 box.
Is this a known bug, or something new?
Quoted 10 lines
^M^@Fusion MPT base driver 3.01.20
^M^@Copyright (c) 1999-2004 LSI Logic Corporation
^M^@ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 27 (level, low) -> IRQ 27 ^M^@mptbase: Initiating ioc0 bringup
^M^@mptbase: ioc0: ERROR - WaitIOC_READYstate timeout(15)! ^M^@mptbase: ioc0: ERROR - Enable Diagnostic mode FAILED! (00h) ^M^@mptbase: ioc0 NOT READY WARNING!
^M^@mptbase: WARNING - ioc0 did not initialize properly! (-1) ^M^@mptbase: probe of 0000:02:04.0 failed with error -1 ^M^@Fusion MPT SCSI Host driver 3.01.20
I get strange errors on -rc4-mm2 as well ... and every kernel since -rc2-mm2 ... though they all fail in different ways.
^M^@tg3.c:v3.27 (May 5, 2005)
^M^@ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 25 (level, low) -> IRQ 25 ^M^@tg3: (0000:02:02.0) phy probe failed, err -16
^M^@BUG: soft lockup detected on CPU#3!
^M
^M^@Modules linked in:
^M^@Pid: 42, comm: swapper Not tainted 2.6.12-rc4-mm2-autokern1 ^M^@RIP: 0010:[<ffffffff8037c42b>] <ffffffff8037c42b>{lock_kernel+27} ^M^@RSP: 0000:ffff8101ff401ec0 EFLAGS: 00000286
^M^@RAX: ffff8101ffb37070 RBX: 0000000000000000 RCX: 0000000000000010 ^M^@RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 ^M^@RBP: 0000000000000000 R08: 0000000000000000 R09: ffff8101ffbad940 ^M^@R10: 0000000000000001 R11: ffffffff80258560 R12: 0000000000000000 ^M^@R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ^M^@FS: 0000000000000000(0000) GS:ffffffff804cf9c0(0000) knlGS:0000000000000000 ^M^@CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
^M^@CR2: 0000000000000000 CR3: 0000000000101000 CR4: 00000000000006e0 ^M
^M^@Call Trace:<ffffffff802af516>{serio_thread+22} <ffffffff8012bdc0>{schedule_t ail+64}
^M^@ <ffffffff8010e47b>{child_rip+8} <ffffffff80258560>{vgacon_cursor+0}
^M^@ <ffffffff802af500>{serio_thread+0} <ffffffff8010e473>{child_rip+0}
^M^@
^M^@tg3: Problem fetching invariants of chip, aborting.
^M^@tg3: probe of 0000:02:02.0 failed with error -16
^M^@ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 26 (level, low) -> IRQ 26 ^M^@tg3: (0000:02:03.0) phy probe failed, err -16
^M^@tg3: Problem fetching invariants of chip, aborting.
^M^@tg3: probe of 0000:02:03.0 failed with error -16
Re: problems with mpt fusion driver since 2.6.12-rc3 (amd64 ?)
Quoted 40 lines
Quoted 5 lines
I get this on boot since -rc3 ... -rc2 worked fine. Is on a 4-way Newisys amd64 box.
Is this a known bug, or something new?
Quoted 10 lines
^M^@Fusion MPT base driver 3.01.20
^M^@Copyright (c) 1999-2004 LSI Logic Corporation
^M^@ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 27 (level, low) -> IRQ 27 ^M^@mptbase: Initiating ioc0 bringup
^M^@mptbase: ioc0: ERROR - WaitIOC_READYstate timeout(15)! ^M^@mptbase: ioc0: ERROR - Enable Diagnostic mode FAILED! (00h) ^M^@mptbase: ioc0 NOT READY WARNING!
^M^@mptbase: WARNING - ioc0 did not initialize properly! (-1) ^M^@mptbase: probe of 0000:02:04.0 failed with error -1 ^M^@Fusion MPT SCSI Host driver 3.01.20I get strange errors on -rc4-mm2 as well ... and every kernel since -rc2-mm2 ... though they all fail in different ways.
^M^@tg3.c:v3.27 (May 5, 2005)
^M^@ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 25 (level, low) -> IRQ 25 ^M^@tg3: (0000:02:02.0) phy probe failed, err -16
^M^@BUG: soft lockup detected on CPU#3!
^M
^M^@Modules linked in:
^M^@Pid: 42, comm: swapper Not tainted 2.6.12-rc4-mm2-autokern1 ^M^@RIP: 0010:[<ffffffff8037c42b>] <ffffffff8037c42b>{lock_kernel+27} ^M^@RSP: 0000:ffff8101ff401ec0 EFLAGS: 00000286
^M^@RAX:ffff8101ffb37070RBX: 0000000000000000 RCX: 0000000000000010 ^M^@RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 ^M^@RBP: 0000000000000000 R08: 0000000000000000 R09:ffff8101ffbad940^M^@R10: 0000000000000001 R11:ffffffff80258560R12: 0000000000000000 ^M^@R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ^M^@FS: 0000000000000000(0000) GS:ffffffff804cf9c0(0000) knlGS:0000000000000000 ^M^@CS: 0010 DS: 0018 ES: 0018 CR0:000000008005003b
^M^@CR2: 0000000000000000 CR3: 0000000000101000 CR4:00000000000006e0^M
^M^@Call Trace:<ffffffff802af516>{serio_thread+22} <ffffffff8012bdc0>{schedule_t ail+64}
^M^@ <ffffffff8010e47b>{child_rip+8} <ffffffff80258560>{vgacon_cursor+0}
Quoted 8 lines
^M^@ <ffffffff802af500>{serio_thread+0} <ffffffff8010e473>{child_rip+0}
^M^@
^M^@tg3: Problem fetching invariants of chip, aborting. ^M^@tg3: probe of 0000:02:02.0 failed with error -16 ^M^@ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 26 (level, low) -> IRQ 26 ^M^@tg3: (0000:02:03.0) phy probe failed, err -16
^M^@tg3: Problem fetching invariants of chip, aborting. ^M^@tg3: probe of 0000:02:03.0 failed with error -16
OK, I tested -rc3 with the fusion code backed down to -rc2 level - no difference. So it's looking more like it might be an interrupt prob?
M.