Refactor to expand subslice mask (rev 2)
Subsystems (2)
cover Refactor to expand subslice mask (rev 2)
Currently, the subslice_mask runtime parameter is stored as an array of subslices per slice. Expand the subslice mask array to better match what is presented to userspace through the I915_QUERY_TOPOLOGY_INFO ioctl. The index into this array is then calculated:
slice * subslice stride + subslice index / 8
Note this is the second iteration of an original patch to implement the same. There are a couple of minor code changes based on changes since the first series was posted. Additionally, the original patch has been split into several smaller patches with more isolated changes based on review feedback in that first series.
Link to the original series:
https://patchwork.freedesktop.org/series/59742/
Stuart Summers (9):
drm/i915: Use variable for debugfs device status drm/i915: Add function to set SSEU info per platform drm/i915: Add subslice stride runtime parameter drm/i915: Add EU stride runtime parameter
drm/i915: Add function to set subslices
drm/i915: Add function to determine if a slice has a subslice drm/i915: Refactor instdone loops on new subslice functions drm/i915: Add new function to copy subslices for a slice drm/i915: Expand subslice mask
drivers/gpu/drm/i915/gt/intel_engine_cs.c | 3 +- drivers/gpu/drm/i915/gt/intel_engine_types.h | 31 +++-- drivers/gpu/drm/i915/gt/intel_hangcheck.c | 3 +- drivers/gpu/drm/i915/gt/intel_sseu.c | 47 +++++++- drivers/gpu/drm/i915/gt/intel_sseu.h | 24 +++- drivers/gpu/drm/i915/gt/intel_workarounds.c | 3 +- drivers/gpu/drm/i915/i915_debugfs.c | 47 +++++--- drivers/gpu/drm/i915/i915_gpu_error.c | 5 +- drivers/gpu/drm/i915/i915_query.c | 10 +- drivers/gpu/drm/i915/intel_device_info.c | 118 +++++++++---------- 10 files changed, 184 insertions(+), 107 deletions(-)
Signature · 6 lines
2.21.0.5.gaeb582a983 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 1/9 drm/i915: Use variable for debugfs device status
Use a local variable to find SSEU runtime information in various debugfs functions.
--- drivers/gpu/drm/i915/i915_debugfs.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/i915_debugfs.c +10 -10
@@ -3929,8 +3929,7 @@ static void gen9_sseu_device_status(struct drm_i915_private *dev_priv, sseu->slice_mask |=BIT (s);if (IS_GEN9_BC (dev_priv)) - sseu->subslice_mask[s] = -RUNTIME_INFO (dev_priv)->sseu.subslice_mask[s]; + sseu->subslice_mask[s] = info->sseu.subslice_mask[s];for (ss =0 ; ss < info->sseu.max_subslices; ss++) {unsigned int eu_cnt;
@@ -3957,6 +3956,7 @@ static void gen9_sseu_device_status(struct drm_i915_private *dev_priv,static void broadwell_sseu_device_status (struct drm_i915_private *dev_priv,struct sseu_dev_info *sseu) { +const struct intel_runtime_info *info =RUNTIME_INFO (dev_priv);u32 slice_info =I915_READ (GEN8_GT_SLICE_INFO );int s;
@@ -3964,10 +3964,10 @@ static void broadwell_sseu_device_status(struct drm_i915_private *dev_priv,if (sseu->slice_mask) { sseu->eu_per_subslice = -RUNTIME_INFO (dev_priv)->sseu.eu_per_subslice; + info->sseu.eu_per_subslice;for (s =0 ; s <fls (sseu->slice_mask); s++) { sseu->subslice_mask[s] = -RUNTIME_INFO (dev_priv)->sseu.subslice_mask[s]; + info->sseu.subslice_mask[s]; } sseu->eu_total = sseu->eu_per_subslice *intel_sseu_subslice_total (sseu);
@@ -3975,7 +3975,7 @@ static void broadwell_sseu_device_status(struct drm_i915_private *dev_priv,/* subtract fused off EU(s) from enabled slice(s) */ for (s =0 ; s <fls (sseu->slice_mask); s++) {u8 subslice_7eu = -RUNTIME_INFO (dev_priv)->sseu.subslice_7eu[s]; + info->sseu.subslice_7eu[s]; sseu->eu_total -=hweight8 (subslice_7eu); }
@@ -4022,6 +4022,7 @@ static void i915_print_sseu_info(struct seq_file *m, bool is_available_info,static int i915_sseu_status (struct seq_file *m,void *unused) {struct drm_i915_private *dev_priv =node_to_i915 (m->private); +const struct intel_runtime_info *info =RUNTIME_INFO (dev_priv);struct sseu_dev_info sseu;intel_wakeref_t wakeref;
@@ -4029,14 +4030,13 @@ static int i915_sseu_status(struct seq_file *m, void *unused)return -ENODEV ;seq_puts (m,"SSEU Device Info\n" ); -i915_print_sseu_info (m, true, &RUNTIME_INFO (dev_priv)->sseu); +i915_print_sseu_info (m, true, &info->sseu);seq_puts (m,"SSEU Device Status\n" );memset (&sseu,0 ,sizeof (sseu)); - sseu.max_slices =RUNTIME_INFO (dev_priv)->sseu.max_slices; - sseu.max_subslices =RUNTIME_INFO (dev_priv)->sseu.max_subslices; - sseu.max_eus_per_subslice = -RUNTIME_INFO (dev_priv)->sseu.max_eus_per_subslice; + sseu.max_slices = info->sseu.max_slices; + sseu.max_subslices = info->sseu.max_subslices; + sseu.max_eus_per_subslice = info->sseu.max_eus_per_subslice; with_intel_runtime_pm(&dev_priv->runtime_pm, wakeref) {if (IS_CHERRYVIEW (dev_priv))
Signature · 6 lines
2.21.0.5.gaeb582a983 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 1/9] drm/i915: Use variable for debugfs device status
Quoted 2 lines · Stuart Summers
Use a local variable to find SSEU runtime information in various debugfs functions.
In all cases where you added a new local info you actually use info->sseu, so why not just add the sseu local to begin with?
Regards,
Tvrtko
Quoted 67 lines
Signed-off-by Stuart Summers <[email protected]>--- drivers/gpu/drm/i915/i915_debugfs.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)drivers/gpu/drm/i915/i915_debugfs.c +7
-6@@ -3929,8 +3929,7 @@ static void gen9_sseu_device_status(struct drm_i915_private *dev_priv, sseu->slice_mask |=BIT (s);if (IS_GEN9_BC (dev_priv)) - sseu->subslice_mask[s] = -RUNTIME_INFO (dev_priv)->sseu.subslice_mask[s]; + sseu->subslice_mask[s] = info->sseu.subslice_mask[s];for (ss =0 ; ss < info->sseu.max_subslices; ss++) {unsigned int eu_cnt;@@ -3957,6 +3956,7 @@ static void gen9_sseu_device_status(struct drm_i915_private *dev_priv,static void broadwell_sseu_device_status (struct drm_i915_private *dev_priv,struct sseu_dev_info *sseu) { +const struct intel_runtime_info *info =RUNTIME_INFO (dev_priv);u32 slice_info =I915_READ (GEN8_GT_SLICE_INFO );int s;@@ -3964,10 +3964,10 @@ static void broadwell_sseu_device_status(struct drm_i915_private *dev_priv,if (sseu->slice_mask) { sseu->eu_per_subslice = -RUNTIME_INFO (dev_priv)->sseu.eu_per_subslice; + info->sseu.eu_per_subslice;for (s =0 ; s <fls (sseu->slice_mask); s++) { sseu->subslice_mask[s] = -RUNTIME_INFO (dev_priv)->sseu.subslice_mask[s]; + info->sseu.subslice_mask[s]; } sseu->eu_total = sseu->eu_per_subslice *intel_sseu_subslice_total (sseu);@@ -3975,7 +3975,7 @@ static void broadwell_sseu_device_status(struct drm_i915_private *dev_priv,/* subtract fused off EU(s) from enabled slice(s) */ for (s =0 ; s <fls (sseu->slice_mask); s++) {u8 subslice_7eu = -RUNTIME_INFO (dev_priv)->sseu.subslice_7eu[s]; + info->sseu.subslice_7eu[s]; sseu->eu_total -=hweight8 (subslice_7eu); }@@ -4022,6 +4022,7 @@ static void i915_print_sseu_info(struct seq_file *m, bool is_available_info,static int i915_sseu_status (struct seq_file *m,void *unused) {struct drm_i915_private *dev_priv =node_to_i915 (m->private); +const struct intel_runtime_info *info =RUNTIME_INFO (dev_priv);struct sseu_dev_info sseu;intel_wakeref_t wakeref;@@ -4029,14 +4030,13 @@ static int i915_sseu_status(struct seq_file *m, void *unused)return -ENODEV ;seq_puts (m,"SSEU Device Info\n" ); -i915_print_sseu_info (m, true, &RUNTIME_INFO (dev_priv)->sseu); +i915_print_sseu_info (m, true, &info->sseu);seq_puts (m,"SSEU Device Status\n" );memset (&sseu,0 ,sizeof (sseu));
drivers/gpu/drm/i915/i915_debugfs.c static int i915_sseu_status(struct seq_file *m, void *unused) · line 4042
Quoted 10 lines
drivers/gpu/drm/i915/i915_debugfs.c +3
-4- sseu.max_slices =RUNTIME_INFO (dev_priv)->sseu.max_slices; - sseu.max_subslices =RUNTIME_INFO (dev_priv)->sseu.max_subslices; - sseu.max_eus_per_subslice = -RUNTIME_INFO (dev_priv)->sseu.max_eus_per_subslice; + sseu.max_slices = info->sseu.max_slices; + sseu.max_subslices = info->sseu.max_subslices; + sseu.max_eus_per_subslice = info->sseu.max_eus_per_subslice; with_intel_runtime_pm(&dev_priv->runtime_pm, wakeref) {if (IS_CHERRYVIEW (dev_priv))
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 2/9 drm/i915: Add function to set SSEU info per platform
In reply to Stuart SummersAdd a new function to allow each platform to set maximum slice, subslice, and EU information to reduce code duplication.
--- drivers/gpu/drm/i915/gt/intel_sseu.c | 8 +++++ drivers/gpu/drm/i915/gt/intel_sseu.h | 3 ++ drivers/gpu/drm/i915/i915_debugfs.c | 6 ++-- drivers/gpu/drm/i915/intel_device_info.c | 39 +++++++++--------------- 4 files changed, 28 insertions(+), 28 deletions(-)
drivers/gpu/drm/i915/gt/intel_sseu.c +8 -0
@@ -8,6 +8,14 @@#include "intel_lrc_reg.h" #include "intel_sseu.h" +void intel_sseu_set_info (struct sseu_dev_info *sseu,u8 max_slices, +u8 max_subslices,u8 max_eus_per_subslice) +{ + sseu->max_slices = max_slices; + sseu->max_subslices = max_subslices; + sseu->max_eus_per_subslice = max_eus_per_subslice; +} +unsigned int intel_sseu_subslice_total (const struct sseu_dev_info *sseu) {
drivers/gpu/drm/i915/gt/intel_sseu.h +3 -0
@@ -63,6 +63,9 @@ intel_sseu_from_device_info(const struct sseu_dev_info *sseu)return value; } +void intel_sseu_set_info (struct sseu_dev_info *sseu,u8 max_slices, +u8 max_subslices,u8 max_eus_per_subslice); +unsigned int intel_sseu_subslice_total (const struct sseu_dev_info *sseu);
drivers/gpu/drm/i915/i915_debugfs.c +3 -3
@@ -4034,9 +4034,9 @@ static int i915_sseu_status(struct seq_file *m, void *unused)seq_puts (m,"SSEU Device Status\n" );memset (&sseu,0 ,sizeof (sseu)); - sseu.max_slices = info->sseu.max_slices; - sseu.max_subslices = info->sseu.max_subslices; - sseu.max_eus_per_subslice = info->sseu.max_eus_per_subslice; +intel_sseu_set_info (&sseu, info->sseu.max_slices, + info->sseu.max_subslices, + info->sseu.max_eus_per_subslice); with_intel_runtime_pm(&dev_priv->runtime_pm, wakeref) {if (IS_CHERRYVIEW (dev_priv))
drivers/gpu/drm/i915/intel_device_info.c +14 -25
@@ -191,15 +191,10 @@ static void gen11_sseu_info_init(struct drm_i915_private *dev_priv)u8 eu_en;int s; -if (IS_ELKHARTLAKE (dev_priv)) { - sseu->max_slices =1 ; - sseu->max_subslices =4 ; - sseu->max_eus_per_subslice =8 ; - }else { - sseu->max_slices =1 ; - sseu->max_subslices =8 ; - sseu->max_eus_per_subslice =8 ; - } +if (IS_ELKHARTLAKE (dev_priv)) +intel_sseu_set_info (sseu,1 ,4 ,8 ); +else +intel_sseu_set_info (sseu,1 ,8 ,8 ); s_en =I915_READ (GEN11_GT_SLICE_ENABLE ) &GEN11_GT_S_ENA_MASK ; ss_en = ~I915_READ (GEN11_GT_SUBSLICE_DISABLE );
@@ -236,11 +231,10 @@ static void gen10_sseu_info_init(struct drm_i915_private *dev_priv)const int eu_mask =0xff ;u32 subslice_mask, eu_en; +intel_sseu_set_info (sseu,6 ,4 ,8 ); + sseu->slice_mask = (fuse2 &GEN10_F2_S_ENA_MASK ) >>GEN10_F2_S_ENA_SHIFT ; - sseu->max_slices =6 ; - sseu->max_subslices =4 ; - sseu->max_eus_per_subslice =8 ; subslice_mask = (1 <<4 ) -1 ; subslice_mask &= ~((fuse2 & GEN10_F2_SS_DIS_MASK) >>
@@ -314,9 +308,7 @@ static void cherryview_sseu_info_init(struct drm_i915_private *dev_priv) fuse =I915_READ (CHV_FUSE_GT ); sseu->slice_mask =BIT (0 ); - sseu->max_slices =1 ; - sseu->max_subslices =2 ; - sseu->max_eus_per_subslice =8 ; +intel_sseu_set_info (sseu,1 ,2 ,8 );if (!(fuse &CHV_FGT_DISABLE_SS0 )) { u8 disabled_mask =
@@ -372,9 +364,8 @@ static void gen9_sseu_info_init(struct drm_i915_private *dev_priv) sseu->slice_mask = (fuse2 &GEN8_F2_S_ENA_MASK ) >>GEN8_F2_S_ENA_SHIFT ;/* BXT has a single slice and at most 3 subslices. */ - sseu->max_slices =IS_GEN9_LP (dev_priv) ?1 :3 ; - sseu->max_subslices =IS_GEN9_LP (dev_priv) ?3 :4 ; - sseu->max_eus_per_subslice =8 ; +intel_sseu_set_info (sseu,IS_GEN9_LP (dev_priv) ?1 :3 , +IS_GEN9_LP (dev_priv) ?3 :4 ,8 );/* * The subslice disable field is global, i.e. it applies
@@ -473,9 +464,7 @@ static void broadwell_sseu_info_init(struct drm_i915_private *dev_priv) fuse2 =I915_READ (GEN8_FUSE2 ); sseu->slice_mask = (fuse2 &GEN8_F2_S_ENA_MASK ) >>GEN8_F2_S_ENA_SHIFT ; - sseu->max_slices =3 ; - sseu->max_subslices =3 ; - sseu->max_eus_per_subslice =8 ; +intel_sseu_set_info (sseu,3 ,3 ,8 );/* * The subslice disable field is global, i.e. it applies
@@ -577,9 +566,6 @@ static void haswell_sseu_info_init(struct drm_i915_private *dev_priv)break ; } - sseu->max_slices =hweight8 (sseu->slice_mask); - sseu->max_subslices =hweight8 (sseu->subslice_mask[0 ]); - fuse1 =I915_READ (HSW_PAVP_FUSE1 );switch ((fuse1 &HSW_F1_EU_DIS_MASK ) >>HSW_F1_EU_DIS_SHIFT ) {default :
@@ -596,7 +582,10 @@ static void haswell_sseu_info_init(struct drm_i915_private *dev_priv) sseu->eu_per_subslice =6 ;break ; } - sseu->max_eus_per_subslice = sseu->eu_per_subslice; + +intel_sseu_set_info (sseu,hweight8 (sseu->slice_mask), +hweight8 (sseu->subslice_mask[0 ]), + sseu->eu_per_subslice);for (s =0 ; s < sseu->max_slices; s++) {for (ss =0 ; ss < sseu->max_subslices; ss++) {
Signature · 6 lines
2.21.0.5.gaeb582a983 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/9] drm/i915: Add function to set SSEU info per platform
Quoted 16 lines · Stuart Summers
Add a new function to allow each platform to set maximum slice, subslice, and EU information to reduce code duplication.
Signed-off-by Stuart Summers <[email protected]>--- drivers/gpu/drm/i915/gt/intel_sseu.c | 8 +++++ drivers/gpu/drm/i915/gt/intel_sseu.h | 3 ++ drivers/gpu/drm/i915/i915_debugfs.c | 6 ++-- drivers/gpu/drm/i915/intel_device_info.c | 39 +++++++++--------------- 4 files changed, 28 insertions(+), 28 deletions(-)drivers/gpu/drm/i915/gt/intel_sseu.c +0
-0
drivers/gpu/drm/i915/gt/intel_sseu.c line 17
Quoted 10 lines
drivers/gpu/drm/i915/gt/intel_sseu.c +7
-0@@ -8,6 +8,14 @@#include "intel_lrc_reg.h" #include "intel_sseu.h" +void intel_sseu_set_info (struct sseu_dev_info *sseu,u8 max_slices, +u8 max_subslices,u8 max_eus_per_subslice) +{ + sseu->max_slices = max_slices; + sseu->max_subslices = max_subslices; + sseu->max_eus_per_subslice = max_eus_per_subslice; +}
Static inline in header since it is so trivial?
Is the term "info" established in this space? I am thinking if just intel_sseu_set would be enough? Or set_topology? Although it is not a full topology.. don't know.
Quoted 60 lines
drivers/gpu/drm/i915/gt/intel_sseu.c +1
-0+unsigned int intel_sseu_subslice_total (const struct sseu_dev_info *sseu) {drivers/gpu/drm/i915/gt/intel_sseu.h +3
-0@@ -63,6 +63,9 @@ intel_sseu_from_device_info(const struct sseu_dev_info *sseu)return value; } +void intel_sseu_set_info (struct sseu_dev_info *sseu,u8 max_slices, +u8 max_subslices,u8 max_eus_per_subslice); +unsigned int intel_sseu_subslice_total (const struct sseu_dev_info *sseu);drivers/gpu/drm/i915/i915_debugfs.c +3
-3@@ -4034,9 +4034,9 @@ static int i915_sseu_status(struct seq_file *m, void *unused)seq_puts (m,"SSEU Device Status\n" );memset (&sseu,0 ,sizeof (sseu)); - sseu.max_slices = info->sseu.max_slices; - sseu.max_subslices = info->sseu.max_subslices; - sseu.max_eus_per_subslice = info->sseu.max_eus_per_subslice; +intel_sseu_set_info (&sseu, info->sseu.max_slices, + info->sseu.max_subslices, + info->sseu.max_eus_per_subslice); with_intel_runtime_pm(&dev_priv->runtime_pm, wakeref) {if (IS_CHERRYVIEW (dev_priv))drivers/gpu/drm/i915/intel_device_info.c +4
-9@@ -191,15 +191,10 @@ static void gen11_sseu_info_init(struct drm_i915_private *dev_priv)u8 eu_en;int s; -if (IS_ELKHARTLAKE (dev_priv)) { - sseu->max_slices =1 ; - sseu->max_subslices =4 ; - sseu->max_eus_per_subslice =8 ; - }else { - sseu->max_slices =1 ; - sseu->max_subslices =8 ; - sseu->max_eus_per_subslice =8 ; - } +if (IS_ELKHARTLAKE (dev_priv)) +intel_sseu_set_info (sseu,1 ,4 ,8 ); +else +intel_sseu_set_info (sseu,1 ,8 ,8 ); s_en =I915_READ (GEN11_GT_SLICE_ENABLE ) &GEN11_GT_S_ENA_MASK ; ss_en = ~I915_READ (GEN11_GT_SUBSLICE_DISABLE );
drivers/gpu/drm/i915/intel_device_info.c static void gen10_sseu_info_init(struct drm_i915_private *dev_priv) · line 237
Quoted 7 lines
drivers/gpu/drm/i915/intel_device_info.c +2
-0@@ -236,11 +231,10 @@ static void gen10_sseu_info_init(struct drm_i915_private *dev_priv)const int eu_mask =0xff ;u32 subslice_mask, eu_en; +intel_sseu_set_info (sseu,6 ,4 ,8 ); + sseu->slice_mask = (fuse2 &GEN10_F2_S_ENA_MASK ) >>GEN10_F2_S_ENA_SHIFT ;
Right, so intel_sseu_set_info sets some bits but not all. I guess topology is then definitely the wrong name. intel_sseu_set_sseu is what it does :), so the final suffix might be redundant be it info or sseu. As you prefer.
Quoted 18 lines
drivers/gpu/drm/i915/intel_device_info.c +1
-6- sseu->max_slices =6 ; - sseu->max_subslices =4 ; - sseu->max_eus_per_subslice =8 ; subslice_mask = (1 <<4 ) -1 ; subslice_mask &= ~((fuse2 & GEN10_F2_SS_DIS_MASK) >>@@ -314,9 +308,7 @@ static void cherryview_sseu_info_init(struct drm_i915_private *dev_priv) fuse =I915_READ (CHV_FUSE_GT ); sseu->slice_mask =BIT (0 ); - sseu->max_slices =1 ; - sseu->max_subslices =2 ; - sseu->max_eus_per_subslice =8 ; +intel_sseu_set_info (sseu,1 ,2 ,8 );if (!(fuse &CHV_FGT_DISABLE_SS0 )) { u8 disabled_mask =
drivers/gpu/drm/i915/intel_device_info.c static void gen9_sseu_info_init(struct drm_i915_private *dev_priv) · line 368
Quoted 8 lines
drivers/gpu/drm/i915/intel_device_info.c +2
-3@@ -372,9 +364,8 @@ static void gen9_sseu_info_init(struct drm_i915_private *dev_priv) sseu->slice_mask = (fuse2 &GEN8_F2_S_ENA_MASK ) >>GEN8_F2_S_ENA_SHIFT ;/* BXT has a single slice and at most 3 subslices. */ - sseu->max_slices =IS_GEN9_LP (dev_priv) ?1 :3 ; - sseu->max_subslices =IS_GEN9_LP (dev_priv) ?3 :4 ; - sseu->max_eus_per_subslice =8 ; +intel_sseu_set_info (sseu,IS_GEN9_LP (dev_priv) ?1 :3 , +IS_GEN9_LP (dev_priv) ?3 :4 ,8 );
So far it all improved readability but not here. I think here
if (IS_GEN9_LP(dev_priv))
intel_sseu_set(...); else intel_sseu_set(...);
Would be cleaner.
Quoted 27 lines
drivers/gpu/drm/i915/intel_device_info.c +1
-6/* * The subslice disable field is global, i.e. it applies @@ -473,9 +464,7 @@ static void broadwell_sseu_info_init(struct drm_i915_private *dev_priv) fuse2 =I915_READ (GEN8_FUSE2 ); sseu->slice_mask = (fuse2 &GEN8_F2_S_ENA_MASK ) >>GEN8_F2_S_ENA_SHIFT ; - sseu->max_slices =3 ; - sseu->max_subslices =3 ; - sseu->max_eus_per_subslice =8 ; +intel_sseu_set_info (sseu,3 ,3 ,8 );/* * The subslice disable field is global, i.e. it applies @@ -577,9 +566,6 @@ static void haswell_sseu_info_init(struct drm_i915_private *dev_priv)break ; } - sseu->max_slices =hweight8 (sseu->slice_mask); - sseu->max_subslices =hweight8 (sseu->subslice_mask[0 ]); - fuse1 =I915_READ (HSW_PAVP_FUSE1 );switch ((fuse1 &HSW_F1_EU_DIS_MASK ) >>HSW_F1_EU_DIS_SHIFT ) {default :@@ -596,7 +582,10 @@ static void haswell_sseu_info_init(struct drm_i915_private *dev_priv) sseu->eu_per_subslice =6 ;
drivers/gpu/drm/i915/intel_device_info.c static void haswell_sseu_info_init(struct drm_i915_private *dev_priv) · line 591
Quoted 10 lines
drivers/gpu/drm/i915/intel_device_info.c +4
-1break ; } - sseu->max_eus_per_subslice = sseu->eu_per_subslice; + +intel_sseu_set_info (sseu,hweight8 (sseu->slice_mask), +hweight8 (sseu->subslice_mask[0 ]), + sseu->eu_per_subslice);for (s =0 ; s < sseu->max_slices; s++) {for (ss =0 ; ss < sseu->max_subslices; ss++) {
Overall looks like a readability improvement. Some tweaks or not as mentioned above can be discussed.
Regards,
Tvrtko
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 3/9 drm/i915: Add subslice stride runtime parameter
In reply to Stuart SummersAdd a new parameter, ss_stride, to the runtime info structure. This is used to mirror the userspace concept of subslice stride, which is a range of subslices per slice.
This patch simply adds the definition and updates usage in the QUERY_TOPOLOGY_INFO handler.
--- drivers/gpu/drm/i915/gt/intel_sseu.c | 2 ++ drivers/gpu/drm/i915/gt/intel_sseu.h | 2 ++ drivers/gpu/drm/i915/i915_query.c | 5 ++--- 3 files changed, 6 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/gt/intel_sseu.c +2 -0
@@ -14,6 +14,8 @@ void intel_sseu_set_info(struct sseu_dev_info *sseu, u8 max_slices, sseu->max_slices = max_slices; sseu->max_subslices = max_subslices; sseu->max_eus_per_subslice = max_eus_per_subslice; + + sseu->ss_stride =GEN_SSEU_STRIDE (sseu->max_subslices); }unsigned int
drivers/gpu/drm/i915/gt/intel_sseu.h +2 -0
@@ -33,6 +33,8 @@ struct sseu_dev_info {u8 max_subslices;u8 max_eus_per_subslice; +u8 ss_stride; +/* We don't have more than 8 eus per subslice at the moment and as we * store eus enabled using bits, no need to multiply by eus per * subslice.
drivers/gpu/drm/i915/i915_query.c +2 -3
@@ -37,7 +37,6 @@ static int query_topology_info(struct drm_i915_private *dev_priv,const struct sseu_dev_info *sseu = &RUNTIME_INFO (dev_priv)->sseu;struct drm_i915_query_topology_info topo;u32 slice_length, subslice_length, eu_length, total_length; -u8 subslice_stride =GEN_SSEU_STRIDE (sseu->max_subslices);u8 eu_stride =GEN_SSEU_STRIDE (sseu->max_eus_per_subslice);int ret;
@@ -50,7 +49,7 @@ static int query_topology_info(struct drm_i915_private *dev_priv,BUILD_BUG_ON (sizeof (u8) !=sizeof (sseu->slice_mask)); slice_length =sizeof (sseu->slice_mask); - subslice_length = sseu->max_slices * subslice_stride; + subslice_length = sseu->max_slices * sseu->ss_stride; eu_length = sseu->max_slices * sseu->max_subslices * eu_stride; total_length =sizeof (topo) + slice_length + subslice_length + eu_length;
@@ -69,7 +68,7 @@ static int query_topology_info(struct drm_i915_private *dev_priv, topo.max_eus_per_subslice = sseu->max_eus_per_subslice; topo.subslice_offset = slice_length; - topo.subslice_stride = subslice_stride; + topo.subslice_stride = sseu->ss_stride; topo.eu_offset = slice_length + subslice_length; topo.eu_stride = eu_stride;
Signature · 6 lines
2.21.0.5.gaeb582a983 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 4/9 drm/i915: Add EU stride runtime parameter
In reply to Stuart SummersAdd a new SSEU runtime parameter, eu_stride, which is used to mirror the userspace concept of a range of EUs per subslice.
This patch simply adds the parameter and updates usage in the QUERY_TOPOLOGY_INFO handler.
--- drivers/gpu/drm/i915/gt/intel_sseu.c | 1 + drivers/gpu/drm/i915/gt/intel_sseu.h | 1 + drivers/gpu/drm/i915/i915_query.c | 5 ++--- drivers/gpu/drm/i915/intel_device_info.c | 9 ++++----- 4 files changed, 8 insertions(+), 8 deletions(-)
drivers/gpu/drm/i915/gt/intel_sseu.c +1 -0
@@ -16,6 +16,7 @@ void intel_sseu_set_info(struct sseu_dev_info *sseu, u8 max_slices, sseu->max_eus_per_subslice = max_eus_per_subslice; sseu->ss_stride =GEN_SSEU_STRIDE (sseu->max_subslices); + sseu->eu_stride =GEN_SSEU_STRIDE (sseu->max_eus_per_subslice); }unsigned int
drivers/gpu/drm/i915/gt/intel_sseu.h +1 -0
@@ -34,6 +34,7 @@ struct sseu_dev_info {u8 max_eus_per_subslice;u8 ss_stride; +u8 eu_stride;/* We don't have more than 8 eus per subslice at the moment and as we * store eus enabled using bits, no need to multiply by eus per
drivers/gpu/drm/i915/i915_query.c +2 -3
@@ -37,7 +37,6 @@ static int query_topology_info(struct drm_i915_private *dev_priv,const struct sseu_dev_info *sseu = &RUNTIME_INFO (dev_priv)->sseu;struct drm_i915_query_topology_info topo;u32 slice_length, subslice_length, eu_length, total_length; -u8 eu_stride =GEN_SSEU_STRIDE (sseu->max_eus_per_subslice);int ret;if (query_item->flags !=0 )
@@ -50,7 +49,7 @@ static int query_topology_info(struct drm_i915_private *dev_priv, slice_length =sizeof (sseu->slice_mask); subslice_length = sseu->max_slices * sseu->ss_stride; - eu_length = sseu->max_slices * sseu->max_subslices * eu_stride; + eu_length = sseu->max_slices * sseu->max_subslices * sseu->eu_stride; total_length =sizeof (topo) + slice_length + subslice_length + eu_length;
@@ -70,7 +69,7 @@ static int query_topology_info(struct drm_i915_private *dev_priv, topo.subslice_offset = slice_length; topo.subslice_stride = sseu->ss_stride; topo.eu_offset = slice_length + subslice_length; - topo.eu_stride = eu_stride; + topo.eu_stride = sseu->eu_stride;if (__copy_to_user (u64_to_user_ptr (query_item->data_ptr), &topo,sizeof (topo)))
drivers/gpu/drm/i915/intel_device_info.c +4 -5
@@ -118,10 +118,9 @@ void intel_device_info_dump_runtime(const struct intel_runtime_info *info,static int sseu_eu_idx (const struct sseu_dev_info *sseu,int slice,int subslice) { -int subslice_stride =GEN_SSEU_STRIDE (sseu->max_eus_per_subslice); -int slice_stride = sseu->max_subslices * subslice_stride; +int slice_stride = sseu->max_subslices * sseu->eu_stride; -return slice * slice_stride + subslice * subslice_stride; +return slice * slice_stride + subslice * sseu->eu_stride; } static u16 sseu_get_eus(const struct sseu_dev_info *sseu, int slice,
@@ -130,7 +129,7 @@ static u16 sseu_get_eus(const struct sseu_dev_info *sseu, int slice,int i, offset =sseu_eu_idx (sseu, slice, subslice);u16 eu_mask =0 ; -for (i =0 ; i <GEN_SSEU_STRIDE (sseu->max_eus_per_subslice); i++) { +for (i =0 ; i < sseu->eu_stride; i++) { eu_mask |= ((u16 )sseu->eu_mask[offset + i]) << (i *BITS_PER_BYTE ); }
@@ -143,7 +142,7 @@ static void sseu_set_eus(struct sseu_dev_info *sseu, int slice, int subslice, {int i, offset =sseu_eu_idx (sseu, slice, subslice); -for (i =0 ; i <GEN_SSEU_STRIDE (sseu->max_eus_per_subslice); i++) { +for (i =0 ; i < sseu->eu_stride; i++) { sseu->eu_mask[offset + i] = (eu_mask >> (BITS_PER_BYTE * i)) &0xff ; }
Signature · 6 lines
2.21.0.5.gaeb582a983 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 5/9 drm/i915: Add function to set subslices
In reply to Stuart SummersAdd a new function to set a range of subslices for a specified slice based on a given mask.
--- drivers/gpu/drm/i915/gt/intel_sseu.c | 10 +++++ drivers/gpu/drm/i915/gt/intel_sseu.h | 3 ++ drivers/gpu/drm/i915/intel_device_info.c | 53 ++++++++++++++---------- 3 files changed, 45 insertions(+), 21 deletions(-)
drivers/gpu/drm/i915/gt/intel_sseu.c +10 -0
@@ -30,6 +30,16 @@ intel_sseu_subslice_total(const struct sseu_dev_info *sseu)return total; } +void intel_sseu_set_subslices (struct sseu_dev_info *sseu,int slice, +u32 ss_mask) +{ +int i, offset = slice * sseu->ss_stride; + +for (i =0 ; i < sseu->ss_stride; i++) + sseu->subslice_mask[offset + i] = + (ss_mask >> (BITS_PER_BYTE * i)) &0xff ; +} +unsigned int intel_sseu_subslices_per_slice (const struct sseu_dev_info *sseu,u8 slice) {
drivers/gpu/drm/i915/gt/intel_sseu.h +3 -0
@@ -75,6 +75,9 @@ intel_sseu_subslice_total(const struct sseu_dev_info *sseu);unsigned int intel_sseu_subslices_per_slice (const struct sseu_dev_info *sseu,u8 slice); +void intel_sseu_set_subslices (struct sseu_dev_info *sseu,int slice, +u32 ss_mask); +u32 intel_sseu_make_rpcs (struct drm_i915_private *i915,const struct intel_sseu *req_sseu);
drivers/gpu/drm/i915/intel_device_info.c +32 -21
132 lines not on this page · raw message
Signature · 6 lines
2.21.0.5.gaeb582a983 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 6/9 drm/i915: Add function to determine if a slice has a subslice
In reply to Stuart SummersAdd a new function to determine whether a particular slice has a given subslice.
--- drivers/gpu/drm/i915/gt/intel_sseu.h | 10 ++++++++++ drivers/gpu/drm/i915/intel_device_info.c | 9 ++++----- 2 files changed, 14 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/gt/intel_sseu.h +10 -0
@@ -66,6 +66,16 @@ intel_sseu_from_device_info(const struct sseu_dev_info *sseu)return value; } +static inline bool +intel_sseu_has_subslice (const struct sseu_dev_info *sseu,int slice, +int subslice) +{ +u8 mask = sseu->subslice_mask[slice * sseu->ss_stride + + subslice /BITS_PER_BYTE ]; + +return mask &BIT (subslice %BITS_PER_BYTE ); +} +void intel_sseu_set_info (struct sseu_dev_info *sseu,u8 max_slices,u8 max_subslices,u8 max_eus_per_subslice);
drivers/gpu/drm/i915/intel_device_info.c +4 -5
@@ -210,10 +210,9 @@ static void gen11_sseu_info_init(struct drm_i915_private *dev_priv)intel_sseu_set_subslices (sseu, s, (ss_en >> ss_idx) & ss_en_mask); -for (ss =0 ; ss < sseu->max_subslices; ss++) { -if (sseu->subslice_mask[s] &BIT (ss)) +for (ss =0 ; ss < sseu->max_subslices; ss++) +if (intel_sseu_has_subslice (sseu, s, ss))sseu_set_eus (sseu, s, ss, eu_en); - } } } sseu->eu_per_subslice =hweight8 (eu_en);
@@ -399,7 +398,7 @@ static void gen9_sseu_info_init(struct drm_i915_private *dev_priv)int eu_per_ss;u8 eu_disabled_mask; -if (!(sseu->subslice_mask[s] &BIT (ss))) +if (!intel_sseu_has_subslice (sseu, s, ss))/* skip disabled subslice */ continue ;
@@ -505,7 +504,7 @@ static void broadwell_sseu_info_init(struct drm_i915_private *dev_priv)u8 eu_disabled_mask;u32 n_disabled; -if (!(sseu->subslice_mask[s] &BIT (ss))) +if (!intel_sseu_has_subslice (sseu, s, ss))/* skip disabled subslice */ continue ;
Signature · 6 lines
2.21.0.5.gaeb582a983 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 7/9 drm/i915: Refactor instdone loops on new subslice functions
In reply to Stuart SummersRefactor instdone loops to use the new intel_sseu_has_subslice function.
--- drivers/gpu/drm/i915/gt/intel_engine_cs.c | 3 +- drivers/gpu/drm/i915/gt/intel_engine_types.h | 31 ++++++++++---------- drivers/gpu/drm/i915/gt/intel_hangcheck.c | 3 +- drivers/gpu/drm/i915/i915_debugfs.c | 5 ++-- drivers/gpu/drm/i915/i915_gpu_error.c | 5 ++-- 5 files changed, 25 insertions(+), 22 deletions(-)
drivers/gpu/drm/i915/gt/intel_engine_cs.c +2 -1
@@ -1009,6 +1009,7 @@ void intel_engine_get_instdone(struct intel_engine_cs *engine, struct intel_instdone *instdone) {struct drm_i915_private *i915 = engine->i915; +const struct sseu_dev_info *sseu = &RUNTIME_INFO (i915)->sseu;struct intel_uncore *uncore = engine->uncore;u32 mmio_base = engine->mmio_base;int slice;
@@ -1026,7 +1027,7 @@ void intel_engine_get_instdone(struct intel_engine_cs *engine, instdone->slice_common =intel_uncore_read (uncore,GEN7_SC_INSTDONE ); -for_each_instdone_slice_subslice (i915, slice, subslice) { +for_each_instdone_slice_subslice (i915, sseu, slice, subslice) { instdone->sampler[slice][subslice] =read_subslice_reg (engine, slice, subslice,GEN7_SAMPLER_INSTDONE );
drivers/gpu/drm/i915/gt/intel_engine_types.h +15 -16
@@ -540,20 +540,19 @@ intel_engine_is_virtual(const struct intel_engine_cs *engine) return engine->flags & I915_ENGINE_IS_VIRTUAL; } -#define instdone_slice_mask (dev_priv__) \ - (IS_GEN(dev_priv__, 7) ? \ - 1 : RUNTIME_INFO(dev_priv__)->sseu.slice_mask) - -#define instdone_subslice_mask (dev_priv__) \ - (IS_GEN(dev_priv__, 7) ? \ - 1 : RUNTIME_INFO(dev_priv__)->sseu.subslice_mask[0]) - -#define for_each_instdone_slice_subslice (dev_priv__, slice__, subslice__) \ - for ((slice__) = 0, (subslice__) = 0; \ - (slice__) < I915_MAX_SLICES; \ - (subslice__) = ((subslice__) + 1) < I915_MAX_SUBSLICES ? (subslice__) + 1 : 0, \ - (slice__) += ((subslice__) == 0)) \ - for_each_if((BIT(slice__) & instdone_slice_mask(dev_priv__)) && \ - (BIT(subslice__) & instdone_subslice_mask(dev_priv__))) - +#define instdone_has_slice (dev_priv___, sseu___, slice___) \ + ((IS_GEN(dev_priv___, 7) ? 1 : ((sseu___)->slice_mask)) & \ + BIT(slice___)) + +#define instdone_has_subslice (dev_priv__, sseu__, slice__, subslice__) \ + (IS_GEN(dev_priv__, 7) ? (1 & BIT(subslice__)) : \ + intel_sseu_has_subslice(sseu__, 0, subslice__)) + +#define for_each_instdone_slice_subslice (dev_priv_, sseu_, slice_, subslice_) \ + for ((slice_) = 0, (subslice_) = 0; (slice_) < I915_MAX_SLICES; \ + (subslice_) = ((subslice_) + 1) % I915_MAX_SUBSLICES, \ + (slice_) += ((subslice_) == 0)) \ + for_each_if((instdone_has_slice(dev_priv_, sseu_, slice_)) && \ + (instdone_has_subslice(dev_priv_, sseu_, slice_, \ + subslice_)))#endif /* __INTEL_ENGINE_TYPES_H__ */
drivers/gpu/drm/i915/gt/intel_hangcheck.c +2 -1
@@ -53,6 +53,7 @@ static bool instdone_unchanged(u32 current_instdone, u32 *old_instdone)static bool subunits_stuck (struct intel_engine_cs *engine) {struct drm_i915_private *dev_priv = engine->i915; +const struct sseu_dev_info *sseu = &RUNTIME_INFO (dev_priv)->sseu;struct intel_instdone instdone;struct intel_instdone *accu_instdone = &engine->hangcheck.instdone;bool stuck;
@@ -71,7 +72,7 @@ static bool subunits_stuck(struct intel_engine_cs *engine) stuck &=instdone_unchanged (instdone.slice_common, &accu_instdone->slice_common); -for_each_instdone_slice_subslice (dev_priv, slice, subslice) { +for_each_instdone_slice_subslice (dev_priv, sseu, slice, subslice) { stuck &=instdone_unchanged (instdone.sampler[slice][subslice], &accu_instdone->sampler[slice][subslice]); stuck &= instdone_unchanged(instdone.row[slice][subslice],
drivers/gpu/drm/i915/i915_debugfs.c +3 -2
@@ -1048,6 +1048,7 @@ static void i915_instdone_info(struct drm_i915_private *dev_priv,struct seq_file *m, struct intel_instdone *instdone) { + const struct sseu_dev_info *sseu = &RUNTIME_INFO(dev_priv)->sseu;int slice;int subslice;
@@ -1063,11 +1064,11 @@ static void i915_instdone_info(struct drm_i915_private *dev_priv,if (INTEL_GEN (dev_priv) <=6 )return ; -for_each_instdone_slice_subslice (dev_priv, slice, subslice) +for_each_instdone_slice_subslice (dev_priv, sseu, slice, subslice)seq_printf (m,"\t\tSAMPLER_INSTDONE[%d][%d]: 0x%08x\n" , slice, subslice, instdone->sampler[slice][subslice]); -for_each_instdone_slice_subslice (dev_priv, slice, subslice) +for_each_instdone_slice_subslice (dev_priv, sseu, slice, subslice)seq_printf (m,"\t\tROW_INSTDONE[%d][%d]: 0x%08x\n" , slice, subslice, instdone->row[slice][subslice]); }
drivers/gpu/drm/i915/i915_gpu_error.c +3 -2
@@ -443,6 +443,7 @@ static void err_compression_marker(struct drm_i915_error_state_buf *m)static void error_print_instdone (struct drm_i915_error_state_buf *m,const struct drm_i915_error_engine *ee) { +const struct sseu_dev_info *sseu = &RUNTIME_INFO (m->i915)->sseu;int slice;int subslice;
@@ -458,12 +459,12 @@ static void error_print_instdone(struct drm_i915_error_state_buf *m,if (INTEL_GEN (m->i915) <=6 )return ; -for_each_instdone_slice_subslice (m->i915, slice, subslice) +for_each_instdone_slice_subslice (m->i915, sseu, slice, subslice)err_printf (m," SAMPLER_INSTDONE[%d][%d]: 0x%08x\n" , slice, subslice, ee->instdone.sampler[slice][subslice]); -for_each_instdone_slice_subslice (m->i915, slice, subslice) +for_each_instdone_slice_subslice (m->i915, sseu, slice, subslice)err_printf (m," ROW_INSTDONE[%d][%d]: 0x%08x\n" , slice, subslice, ee->instdone.row[slice][subslice]);
Signature · 6 lines
2.21.0.5.gaeb582a983 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 8/9 drm/i915: Add new function to copy subslices for a slice
In reply to Stuart SummersAdd a new function to copy subslices for a specified slice between intel_sseu structures for the purpose of determining power-gate status.
--- drivers/gpu/drm/i915/i915_debugfs.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/i915_debugfs.c +15 -6
@@ -3806,6 +3806,15 @@ i915_cache_sharing_set(void *data, u64 val)return 0 ; } +static void +intel_sseu_copy_subslices (const struct sseu_dev_info *sseu,int slice, +u8 *to_mask) +{ +int offset = slice * sseu->ss_stride; + +memcpy (&to_mask[offset], &sseu->subslice_mask[offset], sseu->ss_stride); +} +DEFINE_SIMPLE_ATTRIBUTE (i915_cache_sharing_fops, i915_cache_sharing_get, i915_cache_sharing_set,"%llu\n" );
@@ -3879,7 +3888,7 @@ static void gen10_sseu_device_status(struct drm_i915_private *dev_priv,continue ; sseu->slice_mask |=BIT (s); - sseu->subslice_mask[s] = info->sseu.subslice_mask[s]; +intel_sseu_copy_subslices (&info->sseu, s, sseu->subslice_mask);for (ss =0 ; ss < info->sseu.max_subslices; ss++) {unsigned int eu_cnt;
@@ -3930,7 +3939,8 @@ static void gen9_sseu_device_status(struct drm_i915_private *dev_priv, sseu->slice_mask |=BIT (s);if (IS_GEN9_BC (dev_priv)) - sseu->subslice_mask[s] = info->sseu.subslice_mask[s]; +intel_sseu_copy_subslices (&info->sseu, s, + sseu->subslice_mask);for (ss =0 ; ss < info->sseu.max_subslices; ss++) {unsigned int eu_cnt;
@@ -3966,10 +3976,9 @@ static void broadwell_sseu_device_status(struct drm_i915_private *dev_priv,if (sseu->slice_mask) { sseu->eu_per_subslice = info->sseu.eu_per_subslice; -for (s =0 ; s <fls (sseu->slice_mask); s++) { - sseu->subslice_mask[s] = - info->sseu.subslice_mask[s]; - } +for (s =0 ; s <fls (sseu->slice_mask); s++) +intel_sseu_copy_subslices (&info->sseu, s, + sseu->subslice_mask); sseu->eu_total = sseu->eu_per_subslice *intel_sseu_subslice_total (sseu);
Signature · 6 lines
2.21.0.5.gaeb582a983 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 9/9 drm/i915: Expand subslice mask
In reply to Stuart SummersCurrently, the subslice_mask runtime parameter is stored as an array of subslices per slice. Expand the subslice mask array to better match what is presented to userspace through the I915_QUERY_TOPOLOGY_INFO ioctl. The index into this array is then calculated:
slice * subslice stride + subslice index / 8
--- drivers/gpu/drm/i915/gt/intel_sseu.c | 26 ++++++++++++++++++++- drivers/gpu/drm/i915/gt/intel_sseu.h | 5 +++- drivers/gpu/drm/i915/gt/intel_workarounds.c | 3 +-- drivers/gpu/drm/i915/i915_debugfs.c | 5 +++- drivers/gpu/drm/i915/intel_device_info.c | 8 +++---- 5 files changed, 38 insertions(+), 9 deletions(-)
drivers/gpu/drm/i915/gt/intel_sseu.c +25 -1
@@ -30,6 +30,30 @@ intel_sseu_subslice_total(const struct sseu_dev_info *sseu)return total; } +u32 intel_sseu_get_subslices (const struct sseu_dev_info *sseu,u8 slice) +{ +int i, offset = slice * sseu->ss_stride; +u32 mask =0 ; + +if (slice >= sseu->max_slices) { +DRM_ERROR ("%s: invalid slice %d, max: %d\n" , + __func__, slice, sseu->max_slices); +return 0 ; + } + +if (sseu->ss_stride >sizeof (mask)) { +DRM_ERROR ("%s: invalid subslice stride %d, max: %lu\n" , + __func__, sseu->ss_stride,sizeof (mask)); +return 0 ; + } + +for (i =0 ; i < sseu->ss_stride; i++) + mask |= (u32 )sseu->subslice_mask[offset + i] << + i *BITS_PER_BYTE ; + +return mask; +} +void intel_sseu_set_subslices (struct sseu_dev_info *sseu,int slice,u32 ss_mask) {
@@ -43,7 +67,7 @@ void intel_sseu_set_subslices(struct sseu_dev_info *sseu, int slice,unsigned int intel_sseu_subslices_per_slice (const struct sseu_dev_info *sseu,u8 slice) { -return hweight8 (sseu->subslice_mask[slice]); +return hweight32 (intel_sseu_get_subslices (sseu, slice)); } u32 intel_sseu_make_rpcs(struct drm_i915_private *i915,
drivers/gpu/drm/i915/gt/intel_sseu.h +4 -1
@@ -15,10 +15,11 @@ struct drm_i915_private;#define GEN_MAX_SLICES (6)/* CNL upper bound */ #define GEN_MAX_SUBSLICES (8)/* ICL upper bound */ #define GEN_SSEU_STRIDE (max_entries) DIV_ROUND_UP(max_entries, BITS_PER_BYTE) +#define GEN_MAX_SUBSLICE_STRIDE GEN_SSEU_STRIDE(GEN_MAX_SUBSLICES)struct sseu_dev_info {u8 slice_mask; -u8 subslice_mask[GEN_MAX_SLICES ]; +u8 subslice_mask[GEN_MAX_SLICES *GEN_MAX_SUBSLICE_STRIDE ];u16 eu_total;u8 eu_per_subslice;u8 min_eu_in_pool;
@@ -85,6 +86,8 @@ intel_sseu_subslice_total(const struct sseu_dev_info *sseu);unsigned int intel_sseu_subslices_per_slice (const struct sseu_dev_info *sseu,u8 slice); +u32 intel_sseu_get_subslices (const struct sseu_dev_info *sseu,u8 slice); +void intel_sseu_set_subslices (struct sseu_dev_info *sseu,int slice,u32 ss_mask);
drivers/gpu/drm/i915/gt/intel_workarounds.c +1 -2
@@ -794,8 +794,7 @@ wa_init_mcr(struct drm_i915_private *i915, struct i915_wa_list *wal) } slice =fls (sseu->slice_mask) -1 ; -GEM_BUG_ON (slice >=ARRAY_SIZE (sseu->subslice_mask)); - subslice =fls (l3_en & sseu->subslice_mask[slice]); + subslice =fls (l3_en &intel_sseu_get_subslices (sseu, slice));if (!subslice) {DRM_WARN ("No common index found between subslice mask %x and L3 bank mask %x!\n" , sseu->subslice_mask[slice], l3_en);
drivers/gpu/drm/i915/i915_debugfs.c +4 -1
@@ -3944,13 +3944,16 @@ static void gen9_sseu_device_status(struct drm_i915_private *dev_priv,for (ss =0 ; ss < info->sseu.max_subslices; ss++) {unsigned int eu_cnt; +u8 ss_idx = s * info->sseu.ss_stride + + ss /BITS_PER_BYTE ;if (IS_GEN9_LP (dev_priv)) {if (!(s_reg[s] & (GEN9_PGCTL_SS_ACK (ss))))/* skip disabled subslice */ continue ; - sseu->subslice_mask[s] |=BIT (ss); + sseu->subslice_mask[ss_idx] |= +BIT (ss %BITS_PER_BYTE ); } eu_cnt = 2 * hweight32(eu_reg[2*s + ss/2] &
drivers/gpu/drm/i915/intel_device_info.c +4 -4
@@ -93,9 +93,9 @@ static void sseu_dump(const struct sseu_dev_info *sseu, struct drm_printer *p) hweight8(sseu->slice_mask), sseu->slice_mask);drm_printf (p,"subslice total: %u\n" ,intel_sseu_subslice_total (sseu));for (s =0 ; s < sseu->max_slices; s++) { -drm_printf (p,"slice%d: %u subslices, mask=%04x\n" , +drm_printf (p,"slice%d: %u subslices, mask=%08x\n" , s,intel_sseu_subslices_per_slice (sseu, s), - sseu->subslice_mask[s]); +intel_sseu_get_subslices (sseu, s)); }drm_printf (p,"EU total: %u\n" , sseu->eu_total);drm_printf (p,"EU per subslice: %u\n" , sseu->eu_per_subslice);
@@ -159,9 +159,9 @@ void intel_device_info_dump_topology(const struct sseu_dev_info *sseu, }for (s =0 ; s < sseu->max_slices; s++) { -drm_printf (p,"slice%d: %u subslice(s) (0x%hhx):\n" , +drm_printf (p,"slice%d: %u subslice(s) (0x%08x):\n" , s,intel_sseu_subslices_per_slice (sseu, s), - sseu->subslice_mask[s]); +intel_sseu_get_subslices (sseu, s));for (ss =0 ; ss < sseu->max_subslices; ss++) {u16 enabled_eus =sseu_get_eus (sseu, s, ss);
Signature · 6 lines
2.21.0.5.gaeb582a983 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 9/9] drm/i915: Expand subslice mask
Quoted 37 lines · Stuart Summers
Currently, the
subslice_maskruntime parameter is stored as an array of subslices per slice. Expand the subslice mask array to better match what is presented to userspace through theI915_QUERY_TOPOLOGY_INFOioctl. The index into this array is then calculated:
slice * subslice stride + subslice index / 8Signed-off-by Stuart Summers <[email protected]>--- drivers/gpu/drm/i915/gt/intel_sseu.c | 26 ++++++++++++++++++++- drivers/gpu/drm/i915/gt/intel_sseu.h | 5 +++- drivers/gpu/drm/i915/gt/intel_workarounds.c | 3 +-- drivers/gpu/drm/i915/i915_debugfs.c | 5 +++- drivers/gpu/drm/i915/intel_device_info.c | 8 +++---- 5 files changed, 38 insertions(+), 9 deletions(-)drivers/gpu/drm/i915/gt/intel_sseu.c +13
-0@@ -30,6 +30,30 @@ intel_sseu_subslice_total(const struct sseu_dev_info *sseu)return total; } +u32 intel_sseu_get_subslices (const struct sseu_dev_info *sseu,u8 slice) +{ +int i, offset = slice * sseu->ss_stride; +u32 mask =0 ; + +if (slice >= sseu->max_slices) { +DRM_ERROR ("%s: invalid slice %d, max: %d\n" , + __func__, slice, sseu->max_slices); +return 0 ; + } + +if (sseu->ss_stride >sizeof (mask)) { + DRM_ERROR("%s: invalid subslice stride %d, max: %lu\n",
drivers/gpu/drm/i915/gt/intel_sseu.c intel_sseu_subslice_total(const struct sseu_dev_info *sseu) · line 55
Quoted 10 lines
drivers/gpu/drm/i915/gt/intel_sseu.c +10
-0+ __func__, sseu->ss_stride, sizeof(mask)); +return 0 ; + } + +for (i =0 ; i < sseu->ss_stride; i++) + mask |= (u32 )sseu->subslice_mask[offset + i] << + i *BITS_PER_BYTE ; + +return mask; +}
Why do you actually need these complications when the plan from the start was that the driver and user sseu representation structures can be different?
I only gave it a quick look so I might be wrong, but why not just expand the driver representations of subslice mask up from u8? Userspace API should be able to cope with strides already.
Regards,
Tvrtko
Quoted 94 lines
drivers/gpu/drm/i915/gt/intel_sseu.c +2
-1+void intel_sseu_set_subslices (struct sseu_dev_info *sseu,int slice,u32 ss_mask) {@@ -43,7 +67,7 @@ void intel_sseu_set_subslices(struct sseu_dev_info *sseu, int slice,unsigned int intel_sseu_subslices_per_slice (const struct sseu_dev_info *sseu,u8 slice) { -return hweight8 (sseu->subslice_mask[slice]); +return hweight32 (intel_sseu_get_subslices (sseu, slice)); } u32 intel_sseu_make_rpcs(struct drm_i915_private *i915,drivers/gpu/drm/i915/gt/intel_sseu.h +4
-1@@ -15,10 +15,11 @@ struct drm_i915_private;#define GEN_MAX_SLICES (6)/* CNL upper bound */ #define GEN_MAX_SUBSLICES (8)/* ICL upper bound */ #define GEN_SSEU_STRIDE (max_entries) DIV_ROUND_UP(max_entries, BITS_PER_BYTE) +#define GEN_MAX_SUBSLICE_STRIDE GEN_SSEU_STRIDE(GEN_MAX_SUBSLICES)struct sseu_dev_info {u8 slice_mask; -u8 subslice_mask[GEN_MAX_SLICES ]; +u8 subslice_mask[GEN_MAX_SLICES *GEN_MAX_SUBSLICE_STRIDE ];u16 eu_total;u8 eu_per_subslice;u8 min_eu_in_pool;@@ -85,6 +86,8 @@ intel_sseu_subslice_total(const struct sseu_dev_info *sseu);unsigned int intel_sseu_subslices_per_slice (const struct sseu_dev_info *sseu,u8 slice); +u32 intel_sseu_get_subslices (const struct sseu_dev_info *sseu,u8 slice); +void intel_sseu_set_subslices (struct sseu_dev_info *sseu,int slice,u32 ss_mask);drivers/gpu/drm/i915/gt/intel_workarounds.c +1
-2@@ -794,8 +794,7 @@ wa_init_mcr(struct drm_i915_private *i915, struct i915_wa_list *wal) } slice =fls (sseu->slice_mask) -1 ; -GEM_BUG_ON (slice >=ARRAY_SIZE (sseu->subslice_mask)); - subslice =fls (l3_en & sseu->subslice_mask[slice]); + subslice =fls (l3_en &intel_sseu_get_subslices (sseu, slice));if (!subslice) {DRM_WARN ("No common index found between subslice mask %x and L3 bank mask %x!\n" , sseu->subslice_mask[slice], l3_en);drivers/gpu/drm/i915/i915_debugfs.c +4
-1@@ -3944,13 +3944,16 @@ static void gen9_sseu_device_status(struct drm_i915_private *dev_priv,for (ss =0 ; ss < info->sseu.max_subslices; ss++) {unsigned int eu_cnt; +u8 ss_idx = s * info->sseu.ss_stride + + ss /BITS_PER_BYTE ;if (IS_GEN9_LP (dev_priv)) {if (!(s_reg[s] & (GEN9_PGCTL_SS_ACK (ss))))/* skip disabled subslice */ continue ; - sseu->subslice_mask[s] |=BIT (ss); + sseu->subslice_mask[ss_idx] |= +BIT (ss %BITS_PER_BYTE ); } eu_cnt = 2 * hweight32(eu_reg[2*s + ss/2] &drivers/gpu/drm/i915/intel_device_info.c +2
-2@@ -93,9 +93,9 @@ static void sseu_dump(const struct sseu_dev_info *sseu, struct drm_printer *p) hweight8(sseu->slice_mask), sseu->slice_mask);drm_printf (p,"subslice total: %u\n" ,intel_sseu_subslice_total (sseu));for (s =0 ; s < sseu->max_slices; s++) { -drm_printf (p,"slice%d: %u subslices, mask=%04x\n" , +drm_printf (p,"slice%d: %u subslices, mask=%08x\n" , s,intel_sseu_subslices_per_slice (sseu, s), - sseu->subslice_mask[s]); +intel_sseu_get_subslices (sseu, s)); }drm_printf (p,"EU total: %u\n" , sseu->eu_total);drm_printf (p,"EU per subslice: %u\n" , sseu->eu_per_subslice);@@ -159,9 +159,9 @@ void intel_device_info_dump_topology(const struct sseu_dev_info *sseu, }
drivers/gpu/drm/i915/intel_device_info.c void intel_device_info_dump_topology(const struct sseu_dev_info *sseu, · line 167
Quoted 10 lines
drivers/gpu/drm/i915/intel_device_info.c +2
-2for (s =0 ; s < sseu->max_slices; s++) { -drm_printf (p,"slice%d: %u subslice(s) (0x%hhx):\n" , +drm_printf (p,"slice%d: %u subslice(s) (0x%08x):\n" , s,intel_sseu_subslices_per_slice (sseu, s), - sseu->subslice_mask[s]); +intel_sseu_get_subslices (sseu, s));for (ss =0 ; ss < sseu->max_subslices; ss++) {u16 enabled_eus =sseu_get_eus (sseu, s, ss);
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 9/9] drm/i915: Expand subslice mask
Quoted 52 lines · Tvrtko Ursulin
Quoted 37 lines · Stuart Summers
Currently, the
subslice_maskruntime parameter is stored as an array of subslices per slice. Expand the subslice mask array to better match what is presented to userspace through theI915_QUERY_TOPOLOGY_INFOioctl. The index into this array is then calculated:
slice * subslice stride + subslice index / 8Signed-off-by Stuart Summers <[email protected]>---
drivers/gpu/drm/i915/gt/intel_sseu.c | 26 ++++++++++++++++++++- drivers/gpu/drm/i915/gt/intel_sseu.h | 5 +++-drivers/gpu/drm/i915/gt/intel_workarounds.c| 3 +-- drivers/gpu/drm/i915/i915_debugfs.c | 5 +++- drivers/gpu/drm/i915/intel_device_info.c | 8 +++----5 files changed, 38 insertions(+), 9 deletions(-)drivers/gpu/drm/i915/gt/intel_sseu.c +13
-0@@ -30,6 +30,30 @@ intel_sseu_subslice_total(const struct sseu_dev_info *sseu) return total; } +u32 intel_sseu_get_subslices (const struct sseu_dev_info *sseu,u8 slice) +{ + int i, offset = slice * sseu->ss_stride; + u32 mask = 0; + + if (slice >= sseu->max_slices) { + DRM_ERROR("%s: invalid slice %d, max: %d\n", + __func__, slice, sseu->max_slices); + return 0; + } + + if (sseu->ss_stride > sizeof(mask)) { + DRM_ERROR("%s: invalid subslice stride %d, max: %lu\n",drivers/gpu/drm/i915/gt/intel_sseu.c intel_sseu_subslice_total(const struct · line 55
Quoted 10 lines
drivers/gpu/drm/i915/gt/intel_sseu.c +10
-0+ __func__, sseu->ss_stride, sizeof(mask)); + return 0; + } + + for (i = 0; i < sseu->ss_stride; i++) + mask |= (u32)sseu->subslice_mask[offset + i] << + i * BITS_PER_BYTE; + + return mask; +}Why do you actually need these complications when the plan from the start was that the driver and user sseu representation structures can be different?
Quoted 1 line
I only gave it a quick look so I might be wrong, but why not just expand the driver representations of subslice mask up from u8? Userspace API should be able to cope with strides already.
I never got an answer to this and the series was merged in the meantime.
Maybe not much harm but I still don't understand why all the complications seemingly just to avoid bumping the *internal* ss mask up from u8. As long as the internal and abi sseu info struct are well separated and access point few and well controlled (I think they are) then I don't see why the internal side had to be converted to u8 and strides. But maybe I am missing something.
Regards,
Tvrtko
Quoted 97 lines
Regards,
Tvrtko
Quoted 92 lines
drivers/gpu/drm/i915/gt/intel_sseu.c +1
-0+ void intel_sseu_set_subslices(struct sseu_dev_info *sseu, int slice, u32 ss_mask) {@@ -43,7 +67,7 @@ void intel_sseu_set_subslices(struct sseu_dev_info *sseu, int slice,unsigned int
intel_sseu_subslices_per_slice(const struct sseu_dev_info *sseu, u8 slice){
- returnhweight8(sseu->subslice_mask[slice]);
+ returnhweight32(intel_sseu_get_subslices(sseu, slice));
}
u32 intel_sseu_make_rpcs(structdrm_i915_private*i915,drivers/gpu/drm/i915/gt/intel_sseu.h +2
-1@@ -15,10 +15,11 @@ struct drm_i915_private; #define GEN_MAX_SLICES (6) /* CNL upper bound */ #define GEN_MAX_SUBSLICES (8) /* ICL upper bound */ #define GEN_SSEU_STRIDE(max_entries) DIV_ROUND_UP(max_entries, BITS_PER_BYTE) +#define GEN_MAX_SUBSLICE_STRIDE GEN_SSEU_STRIDE(GEN_MAX_SUBSLICES) struct sseu_dev_info { u8 slice_mask; - u8 subslice_mask[GEN_MAX_SLICES]; + u8 subslice_mask[GEN_MAX_SLICES * GEN_MAX_SUBSLICE_STRIDE]; u16 eu_total; u8 eu_per_subslice; u8 min_eu_in_pool;@@ -85,6 +86,8 @@ intel_sseu_subslice_total(const struct sseu_dev_info *sseu);unsigned int
intel_sseu_subslices_per_slice(const struct sseu_dev_info *sseu, u8 slice); +u32intel_sseu_get_subslices(const struct sseu_dev_info *sseu, u8 slice);
+
voidintel_sseu_set_subslices(struct sseu_dev_info *sseu, int slice, u32 ss_mask);drivers/gpu/drm/i915/gt/intel_workarounds.c +1
-2@@ -794,8 +794,7 @@ wa_init_mcr(struct drm_i915_private *i915, struct i915_wa_list *wal) } slice = fls(sseu->slice_mask) - 1; - GEM_BUG_ON(slice >= ARRAY_SIZE(sseu->subslice_mask)); - subslice = fls(l3_en & sseu->subslice_mask[slice]); + subslice = fls(l3_en & intel_sseu_get_subslices(sseu, slice)); if (!subslice) { DRM_WARN("No common index found between subslice mask %x and L3 bank mask %x!\n", sseu->subslice_mask[slice], l3_en);drivers/gpu/drm/i915/i915_debugfs.c +4
-1@@ -3944,13 +3944,16 @@ static void gen9_sseu_device_status(struct drm_i915_private *dev_priv, for (ss = 0; ss < info->sseu.max_subslices; ss++) { unsigned int eu_cnt; + u8 ss_idx = s * info->sseu.ss_stride + + ss / BITS_PER_BYTE; if (IS_GEN9_LP(dev_priv)) { if (!(s_reg[s] & (GEN9_PGCTL_SS_ACK(ss)))) /* skip disabled subslice */ continue; - sseu->subslice_mask[s] |= BIT(ss); + sseu->subslice_mask[ss_idx] |= + BIT(ss % BITS_PER_BYTE); }
eu_cnt= 2 * hweight32(eu_reg[2*s + ss/2] &drivers/gpu/drm/i915/intel_device_info.c +2
-2@@ -93,9 +93,9 @@ static void sseu_dump(const struct sseu_dev_info *sseu, struct drm_printer *p) hweight8(sseu->slice_mask), sseu->slice_mask); drm_printf(p, "subslice total: %u\n", intel_sseu_subslice_total(sseu)); for (s = 0; s < sseu->max_slices; s++) { - drm_printf(p, "slice%d: %u subslices, mask=%04x\n", + drm_printf(p, "slice%d: %u subslices, mask=%08x\n", s, intel_sseu_subslices_per_slice(sseu, s), - sseu->subslice_mask[s]); + intel_sseu_get_subslices(sseu, s)); } drm_printf(p, "EU total: %u\n", sseu->eu_total);
drm_printf(p, "EU per subslice: %u\n", sseu->eu_per_subslice);drivers/gpu/drm/i915/intel_device_info.c +0
-0@@ -159,9 +159,9 @@ void intel_device_info_dump_topology(const structsseu_dev_info *sseu, } for (s = 0; s < sseu->max_slices; s++) {
Quoted 8 lines
drivers/gpu/drm/i915/intel_device_info.c void intel_device_info_dump_topology(const struct sseu_dev_info *sseu,
Quoted 8 lines
drivers/gpu/drm/i915/intel_device_info.c +2
-2- drm_printf(p, "slice%d: %u subslice(s) (0x%hhx):\n", + drm_printf(p, "slice%d: %u subslice(s) (0x%08x):\n", s, intel_sseu_subslices_per_slice(sseu, s), - sseu->subslice_mask[s]); + intel_sseu_get_subslices(sseu, s)); for (ss = 0; ss < sseu->max_subslices; ss++) { u16 enabled_eus = sseu_get_eus(sseu, s, ss);
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 9/9] drm/i915: Expand subslice mask
Quoting Tvrtko Ursulin (2019-09-02 14:42:44)
Quoted 36 lines · Tvrtko Ursulin
Quoted 30 lines · Stuart Summers
Quoted 13 lines
drivers/gpu/drm/i915/gt/intel_sseu.c +13
-0+u32 intel_sseu_get_subslices (const struct sseu_dev_info *sseu,u8 slice) +{ + int i, offset = slice * sseu->ss_stride; + u32 mask = 0; + + if (slice >= sseu->max_slices) { + DRM_ERROR("%s: invalid slice %d, max: %d\n", + __func__, slice, sseu->max_slices); + return 0; + } + + if (sseu->ss_stride > sizeof(mask)) { + DRM_ERROR("%s: invalid subslice stride %d, max: %lu\n",drivers/gpu/drm/i915/gt/intel_sseu.c intel_sseu_subslice_total(const struct sseu_dev_info *sseu) · line 55
Quoted 10 lines
drivers/gpu/drm/i915/gt/intel_sseu.c +10
-0+ __func__, sseu->ss_stride, sizeof(mask)); + return 0; + } + + for (i = 0; i < sseu->ss_stride; i++) + mask |= (u32)sseu->subslice_mask[offset + i] << + i * BITS_PER_BYTE; + + return mask; +}Why do you actually need these complications when the plan from the start was that the driver and user sseu representation structures can be different?
Quoted 3 lines
I only gave it a quick look so I might be wrong, but why not just expand the driver representations of subslice mask up from u8? Userspace API should be able to cope with strides already.
Quoted 8 lines
I never got an answer to this and the series was merged in the meantime.
Maybe not much harm but I still don't understand why all the complications seemingly just to avoid bumping the *internal* ss mask up from u8. As long as the internal and abi sseu info struct are well separated and access point few and well controlled (I think they are) then I don't see why the internal side had to be converted to u8 and strides. But maybe I am missing something.
I looked at it and thought it was open-coding bitmap.h as well. I accepted it in good faith that it improved certain use cases and should even make tidying up the code without regressing those easier. -Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 9/9] drm/i915: Expand subslice mask
Quoted 45 lines · Chris Wilson
Quoting Tvrtko Ursulin (2019-09-02 14:42:44)
Quoted 44 lines · Tvrtko Ursulin
Quoted 34 lines · Stuart Summers
Quoted 15 lines
+u32
intel_sseu_get_subslices(const struct sseu_dev_info *sseu, u8 slice)drivers/gpu/drm/i915/gt/intel_sseu.c +12
-0+{ +int i, offset = slice * sseu->ss_stride; +u32 mask =0 ; + +if (slice >= sseu->max_slices) { +DRM_ERROR ("%s: invalid slice %d, max: %d\n" , + __func__, slice, sseu->max_slices); +return 0 ; + } + +if (sseu->ss_stride >sizeof (mask)) { + DRM_ERROR("%s: invalid subslice stride %d, max:%lu\n",
drivers/gpu/drm/i915/gt/intel_sseu.c intel_sseu_subslice_total(const struct sseu_dev_info *sseu) · line 55
Quoted 10 lines
drivers/gpu/drm/i915/gt/intel_sseu.c +10
-0+ __func__, sseu->ss_stride, sizeof(mask)); +return 0 ; + } + +for (i =0 ; i < sseu->ss_stride; i++) + mask |= (u32 )sseu->subslice_mask[offset + i] << + i *BITS_PER_BYTE ; + +return mask; +}Why do you actually need these complications when the plan from the
start was that the driver and user sseu representation structures can be
different?Quoted 5 lines
I only gave it a quick look so I might be wrong, but why not just expand
the driver representations of subslice mask up from u8? Userspace API
should be able to cope with strides already.I never got an answer to this and the series was merged in the meantime.
Thanks for the note here Tvrtko and sorry for the missed response! For some reason I hadn't caught this comment earlier :(
Quoted 11 lines
Quoted 10 lines
Maybe not much harm but I still don't understand why all the complications seemingly just to avoid bumping the *internal* ss mask up
from u8. As long as the internal and abi sseu info struct are well separated and access point few and well controlled (I think they are)
then I don't see why the internal side had to be converted to u8 and
strides. But maybe I am missing something.
Quoted 4 lines
I looked at it and thought it was open-coding
bitmap.has well. I accepted it in good faith that it improved certain use cases and should
even make tidying up the code without regressing those easier.
The goal here is to make sure we have an infrastructure in place that always provides a consistent bit layout to userspace regardless of underlying architecture endianness. Perhaps this could have been made more clear in the commit message here.
Thanks,
Stuart
Quoted 1 line
-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 9/9] drm/i915: Expand subslice mask
Quoted 44 lines · Stuart
Quoted 43 lines · Chris Wilson
Quoting Tvrtko Ursulin (2019-09-02 14:42:44)
Quoted 42 lines · Tvrtko Ursulin
Quoted 39 lines · Stuart Summers
Quoted 15 lines
+u32
intel_sseu_get_subslices(const struct sseu_dev_info *sseu, u8 slice)drivers/gpu/drm/i915/gt/intel_sseu.c +12
-0+{ +int i, offset = slice * sseu->ss_stride; +u32 mask =0 ; + +if (slice >= sseu->max_slices) { +DRM_ERROR ("%s: invalid slice %d, max: %d\n" , + __func__, slice, sseu->max_slices); +return 0 ; + } + +if (sseu->ss_stride >sizeof (mask)) { + DRM_ERROR("%s: invalid subslice stride %d, max:%lu\n",
drivers/gpu/drm/i915/gt/intel_sseu.c intel_sseu_subslice_total(const struct sseu_dev_info *sseu) · line 55
Quoted 10 lines
drivers/gpu/drm/i915/gt/intel_sseu.c +10
-0+ __func__, sseu->ss_stride, sizeof(mask)); +return 0 ; + } + +for (i =0 ; i < sseu->ss_stride; i++) + mask |= (u32 )sseu->subslice_mask[offset + i] << + i *BITS_PER_BYTE ; + +return mask; +}Why do you actually need these complications when the plan from the
start was that the driver and user sseu representation structures can be
different?I only gave it a quick look so I might be wrong, but why not just expand
the driver representations of subslice mask up from u8? Userspace API
should be able to cope with strides already.
Quoted 5 lines
Quoted 2 lines
Quoted 2 lines
I never got an answer to this and the series was merged in the meantime.
Thanks for the note here Tvrtko and sorry for the missed response! For some reason I hadn't caught this comment earlier :(
Ok no worries.
Quoted 16 lines
Quoted 11 lines
Quoted 10 lines
Maybe not much harm but I still don't understand why all the complications seemingly just to avoid bumping the *internal* ss mask up
from u8. As long as the internal and abi sseu info struct are well separated and access point few and well controlled (I think they are)
then I don't see why the internal side had to be converted to u8 and
strides. But maybe I am missing something.Quoted 4 lines
I looked at it and thought it was open-coding
bitmap.has well. I accepted it in good faith that it improved certain use cases and should
even make tidying up the code without regressing those easier.
Quoted 4 lines
The goal here is to make sure we have an infrastructure in place that always provides a consistent bit layout to userspace regardless of underlying architecture endianness. Perhaps this could have been made more clear in the commit message here.
My point was that internal and userspace representation do not have to match and that it probably would have been much simpler code if that principle remained. We already had a split between internal and ABI sseu structs and whereas the latter understands concept of stride already, the former could have just had it's subslice mask field expended from u8 to u16, or whatever. But anyway, at this point I don't even remember all the details your series did, and given it's merged I won't be going re-reading it.
Regards,
Tvrtko
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 9/9] drm/i915: Expand subslice mask
Quoted 85 lines · Tvrtko Ursulin
Quoted 49 lines · Stuart
Quoted 48 lines · Chris Wilson
Quoting Tvrtko Ursulin (2019-09-02 14:42:44)
Quoted 47 lines · Tvrtko Ursulin
Quoted 44 lines · Stuart Summers
Quoted 16 lines
+u32 intel_sseu_get_subslices(const struct
sseu_dev_info*sseu,
u8 slice)drivers/gpu/drm/i915/gt/intel_sseu.c +12
-0+{ +int i, offset = slice * sseu->ss_stride; +u32 mask =0 ; + +if (slice >= sseu->max_slices) { +DRM_ERROR ("%s: invalid slice %d, max: %d\n" , + __func__, slice, sseu->max_slices); +return 0 ; + } + +if (sseu->ss_stride >sizeof (mask)) { + DRM_ERROR("%s: invalid subslice stride %d, max:%lu\n",
drivers/gpu/drm/i915/gt/intel_sseu.c intel_sseu_subslice_total(const struct sseu_dev_info *sseu) · line 55
Quoted 10 lines
drivers/gpu/drm/i915/gt/intel_sseu.c +10
-0+ __func__, sseu->ss_stride, sizeof(mask)); +return 0 ; + } + +for (i =0 ; i < sseu->ss_stride; i++) + mask |= (u32 )sseu->subslice_mask[offset + i] << + i *BITS_PER_BYTE ; + +return mask; +}Why do you actually need these complications when the plan from
the
start was that the driver and user sseu representation structures
can be
different?I only gave it a quick look so I might be wrong, but why not just
expand
the driver representations of subslice mask up from u8? Userspace
API
should be able to cope with strides already.Quoted 6 lines
Quoted 2 lines
Quoted 2 lines
I never got an answer to this and the series was merged in the meantime.
Thanks for the note here Tvrtko and sorry for the missed response! For
some reason I hadn't caught this comment earlier :(Ok no worries.
Quoted 19 lines
Quoted 14 lines
Quoted 13 lines
Maybe not much harm but I still don't understand why all the complications seemingly just to avoid bumping the *internal* ss mask up
from u8. As long as the internal and abi sseu info struct are well
separated and access point few and well controlled (I think they
are)
then I don't see why the internal side had to be converted to u8
and
strides. But maybe I am missing something.Quoted 4 lines
I looked at it and thought it was open-coding
bitmap.has well. I accepted it in good faith that it improved certain use cases and should
even make tidying up the code without regressing those easier.Quoted 6 lines
The goal here is to make sure we have an infrastructure in place that
always provides a consistent bit layout to userspace regardless of underlying architecture endianness. Perhaps this could have been made
more clear in the commit message here.
Quoted 13 lines
My point was that internal and userspace representation do not have to
match and that it probably would have been much simpler code if that principle remained. We already had a split between internal and ABI sseu
structs and whereas the latter understands concept of stride already,
the former could have just had it's subslice mask field expended from u8
to u16, or whatever. But anyway, at this point I don't even remember all
the details your series did, and given it's merged I won't be going re-reading it.
Thanks Tvrtko, I'll keep this in mind for future changes.
-Stuart
Quoted 4 lines
Regards,
Tvrtko
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for Refactor to expand subslice mask (rev 2)
In reply to Stuart Summers== Series Details ==
== Series Details ==
Series: Refactor to expand subslice mask (rev 2)
URL : https://patchwork.freedesktop.org/series/64103/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip 4df637a232fe drm/i915: Use variable for debugfs device status d82073ffa3eb drm/i915: Add function to set SSEU info per platform f4f223387c87 drm/i915: Add subslice stride runtime parameter 5ecbd9f63fe4 drm/i915: Add EU stride runtime parameter 1a6c566d84f1 drm/i915: Add function to set subslices ef4c5cd9299b drm/i915: Add function to determine if a slice has a subslice 388db41a51b9 drm/i915: Refactor instdone loops on new subslice functions -:60: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'subslice__' - possible side-effects? #60: FILE: drivers/gpu/drm/i915/gt/intel_engine_types.h:547: +#define instdone_has_subslice(dev_priv__, sseu__, slice__, subslice__) \ + (IS_GEN(dev_priv__, 7) ? (1 & BIT(subslice__)) : \ + intel_sseu_has_subslice(sseu__, 0, subslice__))
-:64: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'dev_priv_' - possible side-effects? #64: FILE: drivers/gpu/drm/i915/gt/intel_engine_types.h:551:
+#define for_each_instdone_slice_subslice(dev_priv_, sseu_, slice_, subslice_) \
+ for ((slice_) = 0, (subslice_) = 0; (slice_) < I915_MAX_SLICES; \
+ (subslice_) = ((subslice_) + 1) % I915_MAX_SUBSLICES, \
+ (slice_) += ((subslice_) == 0)) \
+ for_each_if((instdone_has_slice(dev_priv_, sseu_, slice_)) && \
+ (instdone_has_subslice(dev_priv_, sseu_, slice_, \
+ subslice_)))
-:64: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'sseu_' - possible side-effects? #64: FILE: drivers/gpu/drm/i915/gt/intel_engine_types.h:551:
+#define for_each_instdone_slice_subslice(dev_priv_, sseu_, slice_, subslice_) \
+ for ((slice_) = 0, (subslice_) = 0; (slice_) < I915_MAX_SLICES; \
+ (subslice_) = ((subslice_) + 1) % I915_MAX_SUBSLICES, \
+ (slice_) += ((subslice_) == 0)) \
+ for_each_if((instdone_has_slice(dev_priv_, sseu_, slice_)) && \
+ (instdone_has_subslice(dev_priv_, sseu_, slice_, \
+ subslice_)))
-:64: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'slice_' - possible side-effects? #64: FILE: drivers/gpu/drm/i915/gt/intel_engine_types.h:551:
+#define for_each_instdone_slice_subslice(dev_priv_, sseu_, slice_, subslice_) \
+ for ((slice_) = 0, (subslice_) = 0; (slice_) < I915_MAX_SLICES; \
+ (subslice_) = ((subslice_) + 1) % I915_MAX_SUBSLICES, \
+ (slice_) += ((subslice_) == 0)) \
+ for_each_if((instdone_has_slice(dev_priv_, sseu_, slice_)) && \
+ (instdone_has_subslice(dev_priv_, sseu_, slice_, \
+ subslice_)))
-:64: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'subslice_' - possible side-effects? #64: FILE: drivers/gpu/drm/i915/gt/intel_engine_types.h:551:
+#define for_each_instdone_slice_subslice(dev_priv_, sseu_, slice_, subslice_) \
+ for ((slice_) = 0, (subslice_) = 0; (slice_) < I915_MAX_SLICES; \
+ (subslice_) = ((subslice_) + 1) % I915_MAX_SUBSLICES, \
+ (slice_) += ((subslice_) == 0)) \
+ for_each_if((instdone_has_slice(dev_priv_, sseu_, slice_)) && \
+ (instdone_has_subslice(dev_priv_, sseu_, slice_, \
+ subslice_)))
total: 0 errors, 0 warnings, 5 checks, 106 lines checked 6122cb82ab2b drm/i915: Add new function to copy subslices for a slice 5fe6a6c82eaa drm/i915: Expand subslice mask
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for Refactor to expand subslice mask (rev 2)
In reply to Stuart Summers== Series Details ==
== Series Details ==
Series: Refactor to expand subslice mask (rev 2)
URL : https://patchwork.freedesktop.org/series/64103/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_6543 -> Patchwork_13729
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/
Known issues
------------
Here are the changes found in Patchwork_13729 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_suspend@basic-s3:
- fi-blb-e6850: [PASS][1] -> [INCOMPLETE][2] ([fdo#107718])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/fi-blb-e6850/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/fi-blb-e6850/igt@[email protected]
* igt@gem_mmap_gtt@basic-wc:
- fi-bsw-kefka: [PASS][3] -> [FAIL][4] ([fdo#107307])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/fi-bsw-kefka/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/fi-bsw-kefka/igt@[email protected]
* igt@i915_pm_rpm@basic-pci-d3-state:
- fi-hsw-4770: [PASS][5] -> [SKIP][6] ([fdo#109271]) +1 similar issue
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/fi-hsw-4770/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/fi-hsw-4770/igt@[email protected]
* igt@i915_selftest@live_hangcheck:
- fi-icl-u3: [PASS][7] -> [INCOMPLETE][8] ([fdo#107713] / [fdo#108569])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/fi-icl-u3/igt@i915_selftest@live_hangcheck.html
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/fi-icl-u3/igt@i915_selftest@live_hangcheck.html
* igt@i915_selftest@live_requests:
- fi-icl-guc: [PASS][9] -> [INCOMPLETE][10] ([fdo#107713] / [fdo#109644] / [fdo#110464])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/fi-icl-guc/igt@i915_selftest@live_requests.html
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/fi-icl-guc/igt@i915_selftest@live_requests.html
* igt@kms_chamelium@common-hpd-after-suspend:
- fi-kbl-7567u: [PASS][11] -> [WARN][12] ([fdo#109380])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/fi-kbl-7567u/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/fi-kbl-7567u/igt@[email protected]
* igt@kms_chamelium@hdmi-hpd-fast:
- fi-kbl-7500u: [PASS][13] -> [FAIL][14] ([fdo#109485])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/fi-kbl-7500u/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/fi-kbl-7500u/igt@[email protected]
* igt@kms_pipe_crc_basic@read-crc-pipe-c:
- fi-kbl-7567u: [PASS][15] -> [SKIP][16] ([fdo#109271]) +23 similar issues
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/fi-kbl-7567u/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/fi-kbl-7567u/igt@[email protected]
#### Possible fixes ####
* igt@kms_busy@basic-flip-a:
- fi-kbl-7567u: [SKIP][17] ([fdo#109271] / [fdo#109278]) -> [PASS][18] +2 similar issues
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/fi-kbl-7567u/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/fi-kbl-7567u/igt@[email protected]
* igt@prime_vgem@basic-fence-read:
- fi-icl-u3: [DMESG-WARN][19] ([fdo#107724]) -> [PASS][20] +1 similar issue
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/fi-icl-u3/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/fi-icl-u3/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#107307]: https://bugs.freedesktop.org/show_bug.cgi?id=107307
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718
[fdo#107724]: https://bugs.freedesktop.org/show_bug.cgi?id=107724
[fdo#108569]: https://bugs.freedesktop.org/show_bug.cgi?id=108569
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109380]: https://bugs.freedesktop.org/show_bug.cgi?id=109380
[fdo#109485]: https://bugs.freedesktop.org/show_bug.cgi?id=109485
[fdo#109644]: https://bugs.freedesktop.org/show_bug.cgi?id=109644
[fdo#110464]: https://bugs.freedesktop.org/show_bug.cgi?id=110464
Participating hosts (56 -> 47)
------------------------------
Missing (9): fi-kbl-soraka fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-icl-y fi-byt-clapper fi-bdw-samus
Build changes
-------------
* CI: CI-20190529 -> None
* Linux: CI_DRM_6543 -> Patchwork_13729
CI-20190529: 20190529
CI_DRM_6543: ef1bb6d271fab3750ce23b548954df7b28da8ce7 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5109: e5fd509e16ec649436be31f38eaa5b85cb7f72f1 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_13729: 5fe6a6c82eaa27c062a8f4ea777c9710e73325ba @ git://anongit.freedesktop.org/gfx-ci/linux
== Kernel 32bit build ==
Warning: Kernel 32bit buildtest failed:
https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/build_32bit.log
CALL scripts/checksyscalls.sh
CALL scripts/atomic/check-atomics.sh
CHK include/generated/compile.h
AR drivers/gpu/drm/i915/built-in.a
CC [M] drivers/gpu/drm/i915/gt/intel_sseu.o
In file included from ./include/drm/drm_mm.h:49:0,
from ./include/drm/drm_vma_manager.h:26,
from ./include/drm/drm_gem.h:40,
from ./drivers/gpu/drm/i915/i915_drv.h:52,
from drivers/gpu/drm/i915/gt/intel_sseu.c:7:
drivers/gpu/drm/i915/gt/intel_sseu.c: In function ‘intel_sseu_get_subslices’:
drivers/gpu/drm/i915/gt/intel_sseu.c:45:13: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘unsigned int’ [-Werror=format=]
DRM_ERROR("%s: invalid subslice stride %d, max: %lu\n",
^
./include/drm/drm_print.h:315:10: note: in definition of macro ‘DRM_ERROR’
drm_err(fmt, ##__VA_ARGS__)
^~~cc1: all warnings being treated as errorsscripts/Makefile.build:273: recipe for target 'drivers/gpu/drm/i915/gt/intel_sseu.o' failed make[4]: *** [drivers/gpu/drm/i915/gt/intel_sseu.o] Error 1 scripts/Makefile.build:490: recipe for target 'drivers/gpu/drm/i915' failed make[3]: *** [drivers/gpu/drm/i915] Error 2scripts/Makefile.build:490: recipe for target 'drivers/gpu/drm' failed make[2]: *** [drivers/gpu/drm] Error 2scripts/Makefile.build:490: recipe for target 'drivers/gpu' failed
make[1]: *** [drivers/gpu] Error 2
Makefile:1076: recipe for target 'drivers' failed
make: *** [drivers] Error 2
== Linux commits ==
5fe6a6c82eaa drm/i915: Expand subslice mask6122cb82ab2b drm/i915: Add new function to copy subslices for a slice 388db41a51b9 drm/i915: Refactor instdone loops on new subslice functions ef4c5cd9299b drm/i915: Add function to determine if a slice has a subslice 1a6c566d84f1 drm/i915: Add function to set subslices 5ecbd9f63fe4 drm/i915: Add EU stride runtime parameter f4f223387c87 drm/i915: Add subslice stride runtime parameter d82073ffa3eb drm/i915: Add function to set SSEU info per platform 4df637a232fe drm/i915: Use variable for debugfs device status
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.IGT: failure for Refactor to expand subslice mask (rev 2)
In reply to Stuart Summers== Series Details ==
== Series Details ==
Series: Refactor to expand subslice mask (rev 2)
URL : https://patchwork.freedesktop.org/series/64103/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_6543_full -> Patchwork_13729_full
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with Patchwork_13729_full absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_13729_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in Patchwork_13729_full:
### IGT changes ###
#### Possible regressions ####
* igt@gem_pwrite@big-cpu-fbr:
- shard-glk: [PASS][1] -> [TIMEOUT][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-glk5/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-glk5/igt@[email protected]
* igt@i915_query@query-topology-matches-eu-total:
- shard-hsw: [PASS][3] -> [FAIL][4] +3 similar issues
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-hsw8/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-hsw8/igt@[email protected]
Known issues
------------
Here are the changes found in Patchwork_13729_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_flush@basic-wb-rw-default:
- shard-iclb: [PASS][5] -> [INCOMPLETE][6] ([fdo#107713]) +1 similar issue
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-iclb6/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-iclb7/igt@[email protected]
* igt@gem_workarounds@suspend-resume-context:
- shard-apl: [PASS][7] -> [DMESG-WARN][8] ([fdo#108566]) +2 similar issues
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-apl7/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-apl3/igt@[email protected]
* igt@i915_query@query-topology-coherent-slice-mask:
- shard-hsw: [PASS][9] -> [SKIP][10] ([fdo#109271])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-hsw8/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-hsw7/igt@[email protected]
* igt@kms_cursor_crc@pipe-c-cursor-suspend:
- shard-kbl: [PASS][11] -> [DMESG-WARN][12] ([fdo#108566]) +4 similar issues
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-kbl1/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-kbl3/igt@[email protected]
* igt@kms_cursor_legacy@2x-nonblocking-modeset-vs-cursor-atomic:
- shard-glk: [PASS][13] -> [FAIL][14] ([fdo#106509] / [fdo#107409])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-glk8/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-glk8/igt@[email protected]
* igt@kms_flip@modeset-vs-vblank-race:
- shard-glk: [PASS][15] -> [FAIL][16] ([fdo#103060])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-glk1/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-glk3/igt@[email protected]
* igt@kms_flip_tiling@flip-to-x-tiled:
- shard-skl: [PASS][17] -> [FAIL][18] ([fdo#108134])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-skl5/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-skl10/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-blt:
- shard-iclb: [PASS][19] -> [FAIL][20] ([fdo#103167]) +5 similar issues
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-iclb7/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-iclb3/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-a-constant-alpha-min:
- shard-skl: [PASS][21] -> [FAIL][22] ([fdo#108145])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-skl9/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-skl6/igt@[email protected]
* igt@kms_psr@psr2_sprite_plane_move:
- shard-iclb: [PASS][23] -> [SKIP][24] ([fdo#109441]) +2 similar issues
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-iclb2/igt@kms_psr@psr2_sprite_plane_move.html
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-iclb8/igt@kms_psr@psr2_sprite_plane_move.html
* igt@kms_rotation_crc@multiplane-rotation:
- shard-glk: [PASS][25] -> [DMESG-FAIL][26] ([fdo#105763] / [fdo#106538])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-glk7/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-glk7/igt@[email protected]
* igt@kms_setmode@basic:
- shard-kbl: [PASS][27] -> [FAIL][28] ([fdo#99912])
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-kbl6/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-kbl1/igt@[email protected]
* igt@perf_pmu@busy-double-start-vecs0:
- shard-hsw: [PASS][29] -> [INCOMPLETE][30] ([fdo#103540])
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-hsw7/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-hsw5/igt@[email protected]
#### Possible fixes ####
* igt@gem_ctx_isolation@bcs0-s3:
- shard-apl: [DMESG-WARN][31] ([fdo#108566]) -> [PASS][32] +2 similar issues
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-apl8/igt@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-apl2/igt@[email protected]
* igt@i915_pm_rpm@gem-evict-pwrite:
- shard-iclb: [INCOMPLETE][33] ([fdo#107713] / [fdo#108840]) -> [PASS][34]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-iclb7/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-iclb4/igt@[email protected]
* igt@i915_pm_rpm@i2c:
- shard-hsw: [FAIL][35] ([fdo#104097]) -> [PASS][36]
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-hsw5/igt@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-hsw5/igt@[email protected]
* igt@kms_cursor_crc@pipe-c-cursor-64x21-random:
- shard-iclb: [INCOMPLETE][37] ([fdo#107713]) -> [PASS][38] +1 similar issue
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-iclb7/igt@[email protected]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-iclb3/igt@[email protected]
* igt@kms_cursor_crc@pipe-c-cursor-suspend:
- shard-skl: [INCOMPLETE][39] ([fdo#110741]) -> [PASS][40]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-skl10/igt@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-skl2/igt@[email protected]
* igt@kms_cursor_legacy@2x-long-cursor-vs-flip-atomic:
- shard-hsw: [FAIL][41] ([fdo#105767]) -> [PASS][42]
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-hsw6/igt@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-hsw8/igt@[email protected]
* igt@kms_flip@flip-vs-expired-vblank:
- shard-glk: [FAIL][43] ([fdo#105363]) -> [PASS][44]
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-glk5/igt@[email protected]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-glk5/igt@[email protected]
* igt@kms_flip@flip-vs-expired-vblank-interruptible:
- shard-skl: [FAIL][45] ([fdo#105363]) -> [PASS][46]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-skl3/igt@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-skl6/igt@[email protected]
* igt@kms_flip@flip-vs-suspend:
- shard-hsw: [INCOMPLETE][47] ([fdo#103540]) -> [PASS][48]
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-hsw4/igt@[email protected]
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-hsw7/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-suspend:
- shard-iclb: [FAIL][49] ([fdo#103167]) -> [PASS][50] +5 similar issues
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-iclb8/igt@[email protected]
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-iclb7/igt@[email protected]
* igt@kms_plane@plane-panning-bottom-right-suspend-pipe-a-planes:
- shard-kbl: [DMESG-WARN][51] ([fdo#108566]) -> [PASS][52] +3 similar issues
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-kbl3/igt@[email protected]
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-kbl7/igt@[email protected]
* igt@kms_plane@plane-panning-bottom-right-suspend-pipe-c-planes:
- shard-skl: [INCOMPLETE][53] ([fdo#104108]) -> [PASS][54] +1 similar issue
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-skl5/igt@[email protected]
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-skl8/igt@[email protected]
* igt@kms_psr@psr2_cursor_render:
- shard-iclb: [SKIP][55] ([fdo#109441]) -> [PASS][56] +1 similar issue
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-iclb7/igt@kms_psr@psr2_cursor_render.html
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-iclb2/igt@kms_psr@psr2_cursor_render.html
* igt@kms_setmode@basic:
- shard-apl: [FAIL][57] ([fdo#99912]) -> [PASS][58]
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-apl3/igt@[email protected]
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-apl6/igt@[email protected]
* igt@perf@blocking:
- shard-skl: [FAIL][59] ([fdo#110728]) -> [PASS][60]
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-skl5/igt@[email protected]
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-skl10/igt@[email protected]
* igt@perf_pmu@rc6:
- shard-kbl: [SKIP][61] ([fdo#109271]) -> [PASS][62] +1 similar issue
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-kbl2/igt@[email protected]
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-kbl4/igt@[email protected]
#### Warnings ####
* igt@gem_tiled_swapping@non-threaded:
- shard-skl: [SKIP][63] ([fdo#109271]) -> [FAIL][64] ([fdo#108686])
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6543/shard-skl2/igt@[email protected]
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/shard-skl9/igt@[email protected]
[fdo#103060]: https://bugs.freedesktop.org/show_bug.cgi?id=103060
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103540]: https://bugs.freedesktop.org/show_bug.cgi?id=103540
[fdo#104097]: https://bugs.freedesktop.org/show_bug.cgi?id=104097
[fdo#104108]: https://bugs.freedesktop.org/show_bug.cgi?id=104108
[fdo#105363]: https://bugs.freedesktop.org/show_bug.cgi?id=105363
[fdo#105763]: https://bugs.freedesktop.org/show_bug.cgi?id=105763
[fdo#105767]: https://bugs.freedesktop.org/show_bug.cgi?id=105767
[fdo#106509]: https://bugs.freedesktop.org/show_bug.cgi?id=106509
[fdo#106538]: https://bugs.freedesktop.org/show_bug.cgi?id=106538
[fdo#107409]: https://bugs.freedesktop.org/show_bug.cgi?id=107409
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#108134]: https://bugs.freedesktop.org/show_bug.cgi?id=108134
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#108566]: https://bugs.freedesktop.org/show_bug.cgi?id=108566
[fdo#108686]: https://bugs.freedesktop.org/show_bug.cgi?id=108686
[fdo#108840]: https://bugs.freedesktop.org/show_bug.cgi?id=108840
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#110728]: https://bugs.freedesktop.org/show_bug.cgi?id=110728
[fdo#110741]: https://bugs.freedesktop.org/show_bug.cgi?id=110741
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912
Participating hosts (9 -> 9)
------------------------------
No changes in participating hosts
Build changes
-------------
* CI: CI-20190529 -> None
* Linux: CI_DRM_6543 -> Patchwork_13729
CI-20190529: 20190529
CI_DRM_6543: ef1bb6d271fab3750ce23b548954df7b28da8ce7 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5109: e5fd509e16ec649436be31f38eaa5b85cb7f72f1 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_13729: 5fe6a6c82eaa27c062a8f4ea777c9710e73325ba @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13729/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx