KVM: SEV: Improve GHCB Version Handling for SEV-ES/SEV-SNP
v3 cover KVM: SEV: Improve GHCB Version Handling for SEV-ES/SEV-SNP
As discussed here[1]:
Refactor SEV's GHCB version handling to improve clarity and ABI stability.
* Set the default GHCB version (2) for SEV-ES guests earlier in the flow
* Remove the GHCB_VERSION_DEFAULT macro in favor of hardcoded values to prevent potential ABI issues
* Improve comments to better explain version requirements.
* Enforce minimum GHCB version for SEV-SNP guests.
Patches are based on kvm/next
1. https://lore.kernel.org/kvm/[email protected]/
Nikunj A Dadhania (2):
KVM: SEV: Drop GHCB_VERSION_DEFAULT and open code it
KVM: SEV: Enforce minimum GHCB version requirement for SEV-SNP guests
arch/x86/kvm/svm/sev.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-)
base-commit: 196d9e72c4b0bd68b74a4ec7f52d248f37d0f030
Signature · 1 line
2.43.0
PATCH v3 1/2 KVM: SEV: Drop GHCB_VERSION_DEFAULT and open code it
Remove the GHCB_VERSION_DEFAULT macro and open code it with '2'. The macro is used conditionally and is not a true default. KVM ABI does not advertise/emumerates the default GHCB version. Any future change to this macro would silently alter the ABI and potentially break existing deployments that rely on the current behavior.
Additionally, move the GHCB version assignment earlier in the code flow and update the comment to clarify that KVM_SEV_INIT2 defaults to version 2, while KVM_SEV_INIT forces version 1.
No functional change intended.
--- arch/x86/kvm/svm/sev.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-)
arch/x86/kvm/svm/sev.c +8 -9
@@ -37,7 +37,6 @@#include "trace.h" #define GHCB_VERSION_MAX 2ULL -#define GHCB_VERSION_DEFAULT 2ULL#define GHCB_VERSION_MIN 1ULL#define GHCB_HV_FT_SUPPORTED (GHCB_HV_FT_SNP | GHCB_HV_FT_SNP_AP_CREATION)
@@ -421,6 +420,14 @@ static int __sev_guest_init(struct kvm *kvm, struct kvm_sev_cmd *argp,if (data->ghcb_version >GHCB_VERSION_MAX || (!es_active && data->ghcb_version))return -EINVAL ; +/* +* KVM supports the full range of mandatory features defined by version +* 2 of the GHCB protocol, so default to that for SEV-ES guests created +* via KVM_SEV_INIT2 (KVM_SEV_INIT forces version 1). +*/ +if (es_active && !data->ghcb_version) + data->ghcb_version =2 ; +if (unlikely (sev->active))return -EINVAL ;
@@ -429,14 +436,6 @@ static int __sev_guest_init(struct kvm *kvm, struct kvm_sev_cmd *argp, sev->vmsa_features = data->vmsa_features; sev->ghcb_version = data->ghcb_version; -/* -* Currently KVM supports the full range of mandatory features defined -* by version 2 of the GHCB protocol, so default to that for SEV-ES -* guests created via KVM_SEV_INIT2. -*/ -if (sev->es_active && !sev->ghcb_version) - sev->ghcb_version =GHCB_VERSION_DEFAULT ; -if (vm_type ==KVM_X86_SNP_VM ) sev->vmsa_features |=SVM_SEV_FEAT_SNP_ACTIVE ;
Signature · 1 line
2.43.0
PATCH v3 2/2 KVM: SEV: Enforce minimum GHCB version requirement for SEV-SNP guests
In reply to Nikunj A DadhaniaRequire a minimum GHCB version of 2 when starting SEV-SNP guests through KVM_SEV_INIT2. When a VMM attempts to start an SEV-SNP guest with an incompatible GHCB version (less than 2), reject the request early rather than allowing the guest kernel to start with an incorrect protocol version and fail later with GHCB_SNP_UNSUPPORTED guest termination.
Hypervisor logs the guest termination with GHCB_SNP_UNSUPPORTED error code:
kvm_amd: SEV-ES guest requested termination: 0x0:0x2
SNP guest fails with the below error message:
KVM: unknown exit reason 24
EAX=00000000 EBX=00000000 ECX=00000000 EDX=00a00f11
ESI=00000000 EDI=00000000 EBP=00000000 ESP=00000000
EIP=0000fff0 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0000 00000000 0000ffff 00009300
CS =f000 ffff0000 0000ffff 00009b00
SS =0000 00000000 0000ffff 00009300
DS =0000 00000000 0000ffff 00009300
FS =0000 00000000 0000ffff 00009300
GS =0000 00000000 0000ffff 00009300
LDT=0000 00000000 0000ffff 00008200
TR =0000 00000000 0000ffff 00008b00
GDT= 00000000 0000ffff
IDT= 00000000 0000ffff
CR0=60000010 CR2=00000000 CR3=00000000 CR4=00000000 DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000 DR6=00000000ffff0ff0 DR7=0000000000000400
EFER=0000000000000000
---
Changes since
v2:
* Add new patch for removing GHCB_VERSION_DEFAULT
v1:
* Add failure logs in the commit and drop @stable tag (Sean)
--- arch/x86/kvm/svm/sev.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
arch/x86/kvm/svm/sev.c +6 -2
@@ -405,6 +405,7 @@ static int __sev_guest_init(struct kvm *kvm, struct kvm_sev_cmd *argp,struct kvm_sev_info *sev =to_kvm_sev_info (kvm);struct sev_platform_init_args init_args = {0 };bool es_active = vm_type !=KVM_X86_SEV_VM ; +bool snp_active = vm_type ==KVM_X86_SNP_VM ;u64 valid_vmsa_features = es_active ? sev_supported_vmsa_features :0 ;int ret;
@@ -428,6 +429,9 @@ static int __sev_guest_init(struct kvm *kvm, struct kvm_sev_cmd *argp,if (es_active && !data->ghcb_version) data->ghcb_version =2 ; +if (snp_active && data->ghcb_version <2 ) +return -EINVAL ; +if (unlikely (sev->active))return -EINVAL ;
@@ -436,7 +440,7 @@ static int __sev_guest_init(struct kvm *kvm, struct kvm_sev_cmd *argp, sev->vmsa_features = data->vmsa_features; sev->ghcb_version = data->ghcb_version; -if (vm_type ==KVM_X86_SNP_VM ) +if (snp_active) sev->vmsa_features |=SVM_SEV_FEAT_SNP_ACTIVE ; ret =sev_asid_new (sev);
@@ -454,7 +458,7 @@ static int __sev_guest_init(struct kvm *kvm, struct kvm_sev_cmd *argp, }/* This needs to happen after SEV/SNP firmware initialization. */ -if (vm_type ==KVM_X86_SNP_VM ) { +if (snp_active) { ret =snp_guest_req_init (kvm);if (ret) goto e_free;
Signature · 1 line
2.43.0
Sean Christopherson
maintainerRe: [PATCH v3 2/2] KVM: SEV: Enforce minimum GHCB version requirement for SEV-SNP guests
Quoted 7 lines · Nikunj A Dadhania
Require a minimum GHCB version of 2 when starting SEV-SNP guests through
KVM_SEV_INIT2. When a VMM attempts to start an SEV-SNP guest with an incompatible GHCB version (less than 2), reject the request early rather than allowing the guest kernel to start with an incorrect protocol version and fail later withGHCB_SNP_UNSUPPORTEDguest termination.Hypervisor logs the guest termination with
GHCB_SNP_UNSUPPORTEDerror code:
s/Hypervisor/KVM, though I don't see any point in saying that KVM is doing the logging, that's self-evident from the kvm_amd prefix. Instead, I think what's important to is to say the guest _typically_ requests termination, because AFAICT nothing guarantees the guest will fail in this exact way.
Not enforcing the minimum version typically causes the guest to request termination with GHCB_SNP_UNSUPPORTED error code:
kvm_amd: SEV-ES guest requested termination: 0x0:0x2
Quoted 3 lines
kvm_amd: SEV-ES guest requested termination: 0x0:0x2SNP guest fails with the below error message:
This is QEMU output, not guest output. I don't see any reason to capture this. The fact that QEMU apparently doesn't handle KVM_EXIT_SYSTEM_EVENT isn't interesting.
Quoted 10 lines
KVM: unknown exit reason 24
EAX=00000000 EBX=00000000 ECX=00000000 EDX=00a00f11 ESI=00000000 EDI=00000000 EBP=00000000 ESP=00000000 EIP=0000fff0 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0 ES =0000 000000000000ffff00009300
CS =f000ffff00000000ffff00009b00
SS =0000 000000000000ffff00009300
DS =0000 000000000000ffff00009300
FS =0000 000000000000ffff00009300
GS =0000 000000000000ffff00009300
Quoted 8 lines
LDT=0000 00000000
0000ffff00008200
TR =0000 000000000000ffff00008b00
GDT= 000000000000ffff
IDT= 000000000000ffff
CR0=60000010 CR2=00000000 CR3=00000000 CR4=00000000 DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000 DR6=00000000ffff0ff0 DR7=0000000000000400
EFER=0000000000000000
No need for you to send a new version, I'm going to post a combined series for this and Secure TSC.
Re: [PATCH v3 2/2] KVM: SEV: Enforce minimum GHCB version requirement for SEV-SNP guests
Quoted 14 lines · Sean Christopherson
Quoted 7 lines · Nikunj A Dadhania
Require a minimum GHCB version of 2 when starting SEV-SNP guests through
KVM_SEV_INIT2. When a VMM attempts to start an SEV-SNP guest with an incompatible GHCB version (less than 2), reject the request early rather than allowing the guest kernel to start with an incorrect protocol version and fail later withGHCB_SNP_UNSUPPORTEDguest termination.Hypervisor logs the guest termination with
GHCB_SNP_UNSUPPORTEDerror code:s/Hypervisor/KVM, though I don't see any point in saying that KVM is doing the logging, that's self-evident from the
kvm_amdprefix. Instead, I think what's important to is to say the guest _typically_ requests termination, because AFAICT nothing guarantees the guest will fail in this exact way.
Quoted 4 lines
Not enforcing the minimum version typically causes the guest to request termination with
GHCB_SNP_UNSUPPORTEDerror code:kvm_amd: SEV-ES guest requested termination: 0x0:0x2
Looks good.
Quoted 27 lines
Quoted 3 lines
kvm_amd: SEV-ES guest requested termination: 0x0:0x2SNP guest fails with the below error message:
This is QEMU output, not guest output. I don't see any reason to capture this. The fact that QEMU apparently doesn't handle
KVM_EXIT_SYSTEM_EVENTisn't interesting.Quoted 10 lines
KVM: unknown exit reason 24
EAX=00000000 EBX=00000000 ECX=00000000 EDX=00a00f11 ESI=00000000 EDI=00000000 EBP=00000000 ESP=00000000 EIP=0000fff0 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0 ES =0000 000000000000ffff00009300
CS =f000ffff00000000ffff00009b00
SS =0000 000000000000ffff00009300
DS =0000 000000000000ffff00009300
FS =0000 000000000000ffff00009300
GS =0000 000000000000ffff00009300Quoted 8 lines
LDT=0000 00000000
0000ffff00008200
TR =0000 000000000000ffff00008b00
GDT= 000000000000ffff
IDT= 000000000000ffff
CR0=60000010 CR2=00000000 CR3=00000000 CR4=00000000 DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000 DR6=00000000ffff0ff0 DR7=0000000000000400
EFER=0000000000000000
Quoted 2 lines
No need for you to send a new version, I'm going to post a combined series for this and Secure TSC.
Thank you.
Regards
Nikunj