Skip to contentSkip to conversation

: Mark M-Audio Revolution 7.1 (and probably other ICE1724 cards) as the one with no capture in card matrix

ALSA - driver 0001205 [email protected] 1 participant 1 message Jun 21, 2005

lore
Share & tools
lore
#0 lore raw

The following issue has been set as DUPLICATE OF issue 0001096.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1205>
======================================================================
Reported By: sst4
Assigned To:
======================================================================

Project:                    ALSA - driver
Issue ID:                   1205
Category:                   1_OTHERS
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     new
Distribution:               
Kernel Version:             
======================================================================
Date Submitted:             06-20-2005 00:30 CEST
Last Modified:              06-22-2005 01:47 CEST

======================================================================
Summary: Mark M-Audio Revolution 7.1 (and probably other
ICE1724 cards) as the one with no capture in card matrix Description:
Takashi said the following regarding M-Audio Revolution 7.1 card:

in https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1096 :

"
No, there is no capture control at all on this board, indeed. At least, the hardware spec I got tells nothing about the capture controls. No gain control, no input selection.
";

in https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1164 :

"
Again, revo has no capture control. At least, the hardware spec I got tells so.
";

in https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1187 :

"
The input selection of line-in and mic is unknown thing - i.e. we have no technical information about this feature at all.
".

The quoted words above were said in response to my questions regarding enabling capture.

Quoted 1 line

From the same quoted words I understand that at the moment there is no

known
way to enable capture.

Because of this I think it would be fair to mark the card as the one with unsupported capture. Probably other ICE1724-based cards have the same problem
too.

It would be a pity if other people buy the card and wouldn't be able to use its
capture.

I have uploaded current snapshot of ALSA card matrix, it says:
"
(4) Capture of sound not supported.
",
so I think this marker should be added to the card's description.

Thanks,
Sergei.

======================================================================
Relationships ID Summary
----------------------------------------------------------------------
duplicate of 0001096 no capture with M-Audio Revolution 7.1
======================================================================

----------------------------------------------------------------------
tiwai - 06-21-05 12:44
----------------------------------------------------------------------
Please read texts carefully. The capture works partially. But no "control" for capture exists.

----------------------------------------------------------------------
sst4 - 06-21-05 23:53
----------------------------------------------------------------------
Takashi - "The capture works partially" words of yours are not true.

That is, out of the box capture does NOT work, and to be fair it does not work for almost any card.

However, if I look into, say, asound.state file of CT4610 and the like cards,
(
snd-ens1371 driver, recent example:

https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1023 , attached
https://bugtrack.alsa-project.org/alsa-bug/file_download.php?file_id=654&type=bug

file
),

I see pieces like these:

	control.15 {
		comment.access 'read write'
		comment.type BOOLEAN
		iface MIXER
		name 'Mic Playback Switch'
		value false
	}
	control.16 {
		comment.access 'read write'
		comment.type INTEGER
		comment.range '0 - 31'
		iface MIXER
		name 'Mic Playback Volume'
		value 0
	}
	control.17 {
		comment.access 'read write'
		comment.type BOOLEAN
		iface MIXER
		name 'Mic Boost (+20dB)'
		value false
	}
	control.18 {
		comment.access 'read write'
		comment.type BOOLEAN
		iface MIXER
		name 'Line Playback Switch'
		value false
	}
	control.19 {
		comment.access 'read write'
		comment.type INTEGER
		comment.range '0 - 31'
		iface MIXER
		name 'Line Playback Volume'
		value.0 0
		value.1 0
	}

.

So, I understand that in order to enable capture I have to give TRUE values to flags and non-zero values to volumes.

And changing the flags/volumes makes capture work.

In the M-Audio asound.state file I see no words like "Line Playback Switch",
"Line Playback Volume", so I do not know what to change in order to get capture
working.

I asked the question about controls of M-Audion Revolution 7.1. time and again,
and equivalent question about changing values in asound.state file too, but you
gave me no answer.

So, since apparently nobody knows the answer, please marked the card as the
one with unsupported capture, or tell me, please, whow to enable capture.

In particular, what control numbers in asound.state file of M-Audio Revolution
to change and how to make capture work.

Thanks,
Sergei.

Issue History
Date Modified Username Field Change
======================================================================
06-20-05 00:30 sst4 New Issue
06-20-05 00:30 sst4 File Added: alsa_card_matrix.html

06-21-05 12:44 tiwai          Note Added: 0005107                          
06-21-05 23:53 sst4           Note Added: 0005114                          
06-22-05 01:47 rlrevell       Relationship added       duplicate of 0001096

======================================================================

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click