bbappend files and "ERROR: no recipes available for"
Dear list,
I am working on a compact filesystem image, that contains firmware only for the network hardware on the motherboard.
Therefore, I created a linux-firmware.bbappend file, with the following contents:
Quoted 9 lines
# Cherrypick the firmware files that we need for our hardware
#FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
PACKAGES += "${PN}-rtl8168d-1"
FILES_${PN}-rtl8168d-1 = " \
/lib/firmware/rtl_nic/rtl8168d-1.fw\
"
However, running "bitbake linux-firmware" fails with this bbappend file present:
Quoted 3 lines
ERROR: No recipes available for:
/home/markus/yocto/genericx86-64-dora-10.0.0/meta-markus/recipes-kernel/linux-firmware/linux-firmware.bbappend
ERROR: Command execution failed: Exited with 1
Other bbappend files, such as for custom kernel config for linux-yocto, worked without complaints.
So far, I was following the instructions for using bbappend files here:
http://www.yoctoproject.org/docs/1.5/dev-manual/dev-manual.html#using-bbappend-files
http://www.yoctoproject.org/docs/current/kernel-dev/kernel-dev.html
From what I can see, I am setting up my linux-firmware.bbappend file consistently with the instructions.
What am I doing wrong here?
Thanks very much
Markus
Hi
Rename your bbappend-file to the exact name of the original recipe.
1.5 (dora) contains linux-firmware_git.bb in which case the bbappend should be named linux-firmware_git.bbappend.
Fredag den 1. november 2013 15:43:19 skrev Markus Svilans:
Quoted 50 lines
Dear list,
I am working on a compact filesystem image, that contains firmware only for the network hardware on the motherboard.
Therefore, I created a linux-firmware.bbappend file, with the following
contents:
Quoted 11 lines
# Cherrypick the firmware files that we need for our hardware
#FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
PACKAGES += "${PN}-rtl8168d-1"
FILES_${PN}-rtl8168d-1 = " \
/lib/firmware/rtl_nic/rtl8168d-1.fw \"
However, running "bitbake linux-firmware" fails with this bbappend file
present:
Quoted 4 lines
ERROR: No recipes available for:
/home/markus/yocto/genericx86-64-dora-10.0.0/meta-markus/recipes-kernel/linux-firmware/linux-firmware.bbappend ERROR: Command execution failed:
Exited with 1Other bbappend files, such as for custom kernel config for linux-yocto, worked without complaints.
So far, I was following the instructions for using bbappend files here:
http://www.yoctoproject.org/docs/1.5/dev-manual/dev-manual.html#using-bbappe
nd-files http://www.yoctoproject.org/docs/current/kernel-dev/kernel-dev.htmlFrom what I can see, I am setting up my linux-firmware.bbappend file
consistently with the instructions.What am I doing wrong here?
Thanks very much
Markus_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Signature · 1 line
Søren Holm
Hi Søren,
Thanks very much for the suggestion. It worked.
On the subject, I noticed you have to be careful when using "+=" and "=+" to append to variables in bb files. Here is my bbappend file, with the proper operator after the PACKAGES variable:
Quoted 7 lines
# Cherrypick the firmware files that we need:
PACKAGES =+ " ${PN}-rtl8168d-1"
FILES_${PN}-rtl8168d-1 = " \
/lib/firmware/rtl_nic/rtl8168d-1.fw\
"
Previously I had "+=", and my custom rtl8168 package file was not being generated.
Regards,
Markus
Quoted 56 lines · Søren Holm
Hi
Rename your bbappend-file to the exact name of the original recipe.
1.5 (dora) contains linux-firmware_git.bb in which case the bbappend should be named linux-firmware_git.bbappend.
Fredag den 1. november 2013 15:43:19 skrev Markus Svilans:
Quoted 48 lines
Dear list,
I am working on a compact filesystem image, that contains firmware only for the network hardware on the motherboard.
Therefore, I created a linux-firmware.bbappend file, with the following
contents:
Quoted 11 lines
# Cherrypick the firmware files that we need for our hardware
#FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
PACKAGES += "${PN}-rtl8168d-1"
FILES_${PN}-rtl8168d-1 = " \
/lib/firmware/rtl_nic/rtl8168d-1.fw \"
However, running "bitbake linux-firmware" fails with this bbappend file
present:
Quoted 4 lines
ERROR: No recipes available for:
/home/markus/yocto/genericx86-64-dora-10.0.0/meta-markus/recipes-kernel/linux-firmware/linux-firmware.bbappend ERROR: Command execution failed:
Exited with 1Other bbappend files, such as for custom kernel config for linux-yocto, worked without complaints.
So far, I was following the instructions for using bbappend files here:
http://www.yoctoproject.org/docs/1.5/dev-manual/dev-manual.html#using-bbappe
nd-files http://www.yoctoproject.org/docs/current/kernel-dev/kernel-dev.htmlFrom what I can see, I am setting up my linux-firmware.bbappend file
consistently with the instructions.What am I doing wrong here?
Thanks very much
Markus_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto