ath10k: Fix the MTU size on QCA9377 SDIO
PATCH v3 1/1 ath10k: Fix the MTU size on QCA9377 SDIO
[ Upstream commit 09b8cd69edcf2be04a781e1781e98e52a775c9ad ]
On an imx6dl-pico-pi board with a QCA9377 SDIO chip, simply trying to connect via ssh to another machine causes:
[ 55.824159] ath10k_sdio mmc1:0001:1: failed to transmit packet, dropping: -12 [ 55.832169] ath10k_sdio mmc1:0001:1: failed to submit frame: -12 [ 55.838529] ath10k_sdio mmc1:0001:1: failed to push frame: -12 [ 55.905863] ath10k_sdio mmc1:0001:1: failed to transmit packet, dropping: -12 [ 55.913650] ath10k_sdio mmc1:0001:1: failed to submit frame: -12 [ 55.919887] ath10k_sdio mmc1:0001:1: failed to push frame: -12
, leading to an ssh connection failure.
One user inspected the size of frames on Wireshark and reported the followig:
"I was able to narrow the issue down to the mtu. If I set the mtu for the wlan0 device to 1486 instead of 1500, the issue does not happen.
The size of frames that I see on Wireshark is exactly 1500 after setting it to 1486."
Clearing the HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE avoids the problem and the ssh command works successfully after that.
Introduce a 'credit_size_workaround' field to ath10k_hw_params for the QCA9377 SDIO, so that the HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE is not set in this case.
Tested with QCA9377 SDIO with firmware WLAN.TF.1.1.1-00061-QCATFSWPZ-1.
---
Hi,
This is the resolution for the linux-stable 5.10 tree.
Changes since v2:
- Add the missing blank line in hw.h like done in the upstream version. Changes since v1:
- Added the missing change in hw.h.
drivers/net/wireless/ath/ath10k/core.c | 19 ++++++++++++++++++- drivers/net/wireless/ath/ath10k/hw.h | 3 +++ 2 files changed, 21 insertions(+), 1 deletion(-)
drivers/net/wireless/ath/ath10k/core.c +18 -1
@@ -89,6 +89,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .rri_on_ddr = false, .hw_filter_reset_required = true, .fw_diag_ce_download = false, + .credit_size_workaround = false, .tx_stats_over_pktlog = true, }, {
@@ -123,6 +124,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .rri_on_ddr = false, .hw_filter_reset_required = true, .fw_diag_ce_download = false, + .credit_size_workaround = false, .tx_stats_over_pktlog = true, }, {
@@ -158,6 +160,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .rri_on_ddr = false, .hw_filter_reset_required = true, .fw_diag_ce_download = false, + .credit_size_workaround = false, .tx_stats_over_pktlog = false, }, {
@@ -187,6 +190,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .num_wds_entries = 0x20, .uart_pin_workaround = true, .tx_stats_over_pktlog = false, + .credit_size_workaround = false, .bmi_large_size_download = true, .supports_peer_stats_info = true, },
@@ -222,6 +226,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .rri_on_ddr = false, .hw_filter_reset_required = true, .fw_diag_ce_download = false, + .credit_size_workaround = false, .tx_stats_over_pktlog = false, }, {
@@ -256,6 +261,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .rri_on_ddr = false, .hw_filter_reset_required = true, .fw_diag_ce_download = false, + .credit_size_workaround = false, .tx_stats_over_pktlog = false, }, {
@@ -290,6 +296,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .rri_on_ddr = false, .hw_filter_reset_required = true, .fw_diag_ce_download = false, + .credit_size_workaround = false, .tx_stats_over_pktlog = false, }, {
@@ -327,6 +334,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .rri_on_ddr = false, .hw_filter_reset_required = true, .fw_diag_ce_download = true, + .credit_size_workaround = false, .tx_stats_over_pktlog = false, .supports_peer_stats_info = true, },
@@ -368,6 +376,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .rri_on_ddr = false, .hw_filter_reset_required = true, .fw_diag_ce_download = false, + .credit_size_workaround = false, .tx_stats_over_pktlog = false, }, {
@@ -415,6 +424,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .rri_on_ddr = false, .hw_filter_reset_required = true, .fw_diag_ce_download = false, + .credit_size_workaround = false, .tx_stats_over_pktlog = false, }, {
@@ -459,6 +469,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .rri_on_ddr = false, .hw_filter_reset_required = true, .fw_diag_ce_download = false, + .credit_size_workaround = false, .tx_stats_over_pktlog = false, }, {
@@ -493,6 +504,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .rri_on_ddr = false, .hw_filter_reset_required = true, .fw_diag_ce_download = false, + .credit_size_workaround = false, .tx_stats_over_pktlog = false, }, {
@@ -529,6 +541,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .rri_on_ddr = false, .hw_filter_reset_required = true, .fw_diag_ce_download = true, + .credit_size_workaround = false, .tx_stats_over_pktlog = false, }, {
@@ -557,6 +570,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .ast_skid_limit = 0x10, .num_wds_entries = 0x20, .uart_pin_workaround = true, + .credit_size_workaround = true, }, { .id = QCA4019_HW_1_0_DEV_VERSION,
@@ -597,6 +611,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .rri_on_ddr = false, .hw_filter_reset_required = true, .fw_diag_ce_download = false, + .credit_size_workaround = false, .tx_stats_over_pktlog = false, }, {
@@ -624,6 +639,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .rri_on_ddr = true, .hw_filter_reset_required = false, .fw_diag_ce_download = false, + .credit_size_workaround = false, .tx_stats_over_pktlog = false, }, };
@@ -697,6 +713,7 @@ static void ath10k_send_suspend_complete(struct ath10k *ar)static int ath10k_init_sdio (struct ath10k *ar,enum ath10k_firmware_mode mode) { +bool mtu_workaround = ar->hw_params.credit_size_workaround;int ret;u32 param =0 ;
@@ -714,7 +731,7 @@ static int ath10k_init_sdio(struct ath10k *ar, enum ath10k_firmware_mode mode) param |=HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET ; -if (mode ==ATH10K_FIRMWARE_MODE_NORMAL ) +if (mode ==ATH10K_FIRMWARE_MODE_NORMAL && !mtu_workaround) param |=HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE ;else param &= ~HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE ;
drivers/net/wireless/ath/ath10k/hw.h +3 -0
@@ -618,6 +618,9 @@ struct ath10k_hw_params {*/ bool uart_pin_workaround; +/* Workaround for the credit size calculation */ +bool credit_size_workaround; +/* tx stats support over pktlog */ bool tx_stats_over_pktlog;
Signature · 1 line
2.25.1
Greg KH
maintainerQuoted 39 lines · Fabio Estevam
[ Upstream commit
09b8cd69edcf2be04a781e1781e98e52a775c9ad]On an imx6dl-pico-pi board with a QCA9377 SDIO chip, simply trying to connect via ssh to another machine causes:
[ 55.824159] ath10k_sdio mmc1:0001:1: failed to transmit packet, dropping: -12 [ 55.832169] ath10k_sdio mmc1:0001:1: failed to submit frame: -12 [ 55.838529] ath10k_sdio mmc1:0001:1: failed to push frame: -12 [ 55.905863] ath10k_sdio mmc1:0001:1: failed to transmit packet, dropping: -12 [ 55.913650] ath10k_sdio mmc1:0001:1: failed to submit frame: -12 [ 55.919887] ath10k_sdio mmc1:0001:1: failed to push frame: -12, leading to an ssh connection failure.
One user inspected the size of frames on Wireshark and reported the followig:
"I was able to narrow the issue down to the mtu. If I set the mtu for the wlan0 device to 1486 instead of 1500, the issue does not happen.
The size of frames that I see on Wireshark is exactly 1500 after setting it to 1486."
Clearing the
HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZEavoids the problem and the ssh command works successfully after that.Introduce a '
credit_size_workaround' field toath10k_hw_paramsfor the QCA9377 SDIO, so that theHI_ACS_FLAGS_ALT_DATA_CREDIT_SIZEis not set in this case.Tested with QCA9377 SDIO with firmware WLAN.TF.1.1.1-00061-QCATFSWPZ-1.
Fixes 2f918ea98606 ("ath10k: enable alt data of TX path for sdio")Signed-off-by Fabio Estevam <[email protected]>Signed-off-by Kalle Valo <[email protected]>---
Hi,
Quoted 6 lines
This is the resolution for the linux-stable 5.10 tree.
Changes since v2:
- Add the missing blank line inhw.hlike done in the upstream version. Changes since v1:
- Added the missing change inhw.h.
Ok, trying this again...
Hi Greg,
Quoted 1 line · Greg KH
Ok, trying this again...
Thanks and sorry for the trouble.
Cheers,
Fabio Estevam
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-60 Fax: (+49)-8142-66989-80 Email: [email protected]