drm/display: Add missing Adaptive Sync DPCD definitions
PATCH v2 1/1 drm/display: Add missing Adaptive Sync DPCD definitions
The missing DPCD defintions from DP2.0 spec is as follows:
DOWNSPREAD_CTRL (107h):
FIXED_VTOTAL_AS_SDP_EN_IN_PR_ACTIVE (bit 6)
For sink devices that support Adaptive-Sync operation and Panel Replay
DPRX_FEATURE_ENUMERATION_LIST_CONT_1 (2214h):
ADAPTIVE_SYNC_SDP_SUPPORTED (bit 0)
Bit to check sink device has Adaptive-Sync capability
AS_SDP_FIRST_HALF_LINE_OR_3840_PIXEL_CYCLE_WINDOW_NOT_SUPPORTED (bit 1)
A sink device that clears this bit will generate VSync pulse leading edge of the HDMI output on the line count at which Adaptive-Sync SDP is received as long as source device transmits Adaptive-Sync SDP either in first line or first 3840 pixel cycles of the line whichever occurs first.
VSC_EXT_SDP_FRAMEWORK_VERSION_1_SUPPORTED (bit 4)
Bit to check sink device has SDP framework version 1 capability
--- include/drm/display/drm_dp.h | 6 ++++++ 1 file changed, 6 insertions(+)
include/drm/display/drm_dp.h +6 -0
@@ -603,6 +603,7 @@#define DP_DOWNSPREAD_CTRL 0x107# define DP_SPREAD_AMP_0_5 (1 << 4) +# define DP_FIXED_VTOTAL_AS_SDP_EN_IN_PR_ACTIVE (1 << 6)# define DP_MSA_TIMING_PAR_IGNORE_EN (1 << 7)/* eDP */ #define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108
@@ -1105,6 +1106,11 @@# define DP_VSC_EXT_CEA_SDP_SUPPORTED (1 << 6)/* DP 1.4 */ # define DP_VSC_EXT_CEA_SDP_CHAINING_SUPPORTED (1 << 7)/* DP 1.4 */ +#define DP_DPRX_FEATURE_ENUMERATION_LIST_CONT_1 0x2214/* 2.0 E11 */ +# define DP_ADAPTIVE_SYNC_SDP_SUPPORTED (1 << 0) +# define DP_AS_SDP_FIRST_HALF_LINE_OR_3840_PIXEL_CYCLE_WINDOW_NOT_SUPPORTED (1 << 1) +# define DP_VSC_EXT_SDP_FRAMEWORK_VERSION_1_SUPPORTED (1 << 4) +#define DP_128B132B_SUPPORTED_LINK_RATES 0x2215/* 2.0 */ # define DP_UHBR10 (1 << 0)# define DP_UHBR20 (1 << 1)
Signature · 1 line
2.20.1
Quoted 7 lines · Sung Joon Kim
The missing DPCD defintions from DP2.0 spec is as follows:
DOWNSPREAD_CTRL(107h):
FIXED_VTOTAL_AS_SDP_EN_IN_PR_ACTIVE(bit 6)
For sink devices that support Adaptive-Sync operation and Panel Replay
Quoted 11 lines
DPRX_FEATURE_ENUMERATION_LIST_CONT_1(2214h):
ADAPTIVE_SYNC_SDP_SUPPORTED(bit 0)
Bit to check sink device has Adaptive-Sync capability
AS_SDP_FIRST_HALF_LINE_OR_3840_PIXEL_CYCLE_WINDOW_NOT_SUPPORTED(bit 1)
A sink device that clears this bit will generate VSync pulse leading edge of the HDMI output on the line count at which Adaptive-Sync SDP is received as long as source device transmits Adaptive-Sync SDP either in first line or first 3840 pixel cycles of the line whichever occurs first.
VSC_EXT_SDP_FRAMEWORK_VERSION_1_SUPPORTED(bit 4)
Bit to check sink device has SDP framework version 1 capability
You're missing your Signed-off-by. Make sure to add it before pushing.
With that fixed this is:
Harry
Quoted 28 lines
--- include/drm/display/drm_dp.h | 6 ++++++ 1 file changed, 6 insertions(+)include/drm/display/drm_dp.h +6
-0@@ -603,6 +603,7 @@#define DP_DOWNSPREAD_CTRL 0x107# define DP_SPREAD_AMP_0_5 (1 << 4) +# define DP_FIXED_VTOTAL_AS_SDP_EN_IN_PR_ACTIVE (1 << 6)# define DP_MSA_TIMING_PAR_IGNORE_EN (1 << 7)/* eDP */ #define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108@@ -1105,6 +1106,11 @@# define DP_VSC_EXT_CEA_SDP_SUPPORTED (1 << 6)/* DP 1.4 */ # define DP_VSC_EXT_CEA_SDP_CHAINING_SUPPORTED (1 << 7)/* DP 1.4 */ +#define DP_DPRX_FEATURE_ENUMERATION_LIST_CONT_1 0x2214/* 2.0 E11 */ +# define DP_ADAPTIVE_SYNC_SDP_SUPPORTED (1 << 0) +# define DP_AS_SDP_FIRST_HALF_LINE_OR_3840_PIXEL_CYCLE_WINDOW_NOT_SUPPORTED (1 << 1) +# define DP_VSC_EXT_SDP_FRAMEWORK_VERSION_1_SUPPORTED (1 << 4) +#define DP_128B132B_SUPPORTED_LINK_RATES 0x2215/* 2.0 */ # define DP_UHBR10 (1 << 0)# define DP_UHBR20 (1 << 1)