arm64: dts: rockchip: Add pinctrl gpio-ranges for rk356x
Subsystems (2)
PATCH 1/1 arm64: dts: rockchip: Add pinctrl gpio-ranges for rk356x
Add gpio-range properties to the pinctrl gpio nodes in rk356x.dtsi
Signed-off-by John Clark <[email protected]>
--- arch/arm64/boot/dts/rockchip/rk356x.dtsi | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/rockchip/rk356x.dtsi +6 -1
@@ -1796,11 +1796,11 @@ usb2phy1_otg: otg-port { pinctrl: pinctrl { compatible = "rockchip,rk3568-pinctrl"; + ranges; rockchip,grf = <&grf>; rockchip,pmu = <&pmugrf>; #address-cells = <2>; #size-cells = <2>; - ranges; gpio0: gpio@fdd60000 { compatible = "rockchip,gpio-bank";
@@ -1808,6 +1808,7 @@ gpio0: gpio@fdd60000 { interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>; gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>;
@@ -1819,6 +1820,7 @@ gpio1: gpio@fe740000 { interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>; gpio-controller; + gpio-ranges = <&pinctrl 0 32 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>;
@@ -1830,6 +1832,7 @@ gpio2: gpio@fe750000 { interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>; gpio-controller; + gpio-ranges = <&pinctrl 0 64 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>;
@@ -1841,6 +1844,7 @@ gpio3: gpio@fe760000 { interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>; gpio-controller; + gpio-ranges = <&pinctrl 0 96 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>;
@@ -1852,6 +1856,7 @@ gpio4: gpio@fe770000 { interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>; gpio-controller; + gpio-ranges = <&pinctrl 0 128 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>;
Signature · 7 lines
2.39.2 _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip
Quoted 12 lines · John Clark
Add gpio-range properties to the pinctrl gpio nodes in
rk356x.dtsiSigned-off-by John Clark <[email protected]>--- arch/arm64/boot/dts/rockchip/rk356x.dtsi | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)arch/arm64/boot/dts/rockchip/rk356x.dtsi +0
-0
arch/arm64/boot/dts/rockchip/rk356x.dtsi usb2phy1_otg: otg-port { · line 1803
Quoted 9 lines
arch/arm64/boot/dts/rockchip/rk356x.dtsi +1
-1@@ -1796,11 +1796,11 @@ usb2phy1_otg: otg-port { pinctrl: pinctrl { compatible = "rockchip,rk3568-pinctrl"; + ranges; rockchip,grf = <&grf>; rockchip,pmu = <&pmugrf>; #address-cells = <2>; #size-cells = <2>; - ranges;
Not related to your patch.
Best regards,
Krzysztof
PATCH v2 1/1 arm64: dts: rockchip: Add pinctrl gpio-ranges for rk356x
In reply to John ClarkAdd gpio-range properties to the pinctrl gpio nodes in rk356x.dtsi
Signed-off-by John Clark <[email protected]>
--- arch/arm64/boot/dts/rockchip/rk356x.dtsi | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm64/boot/dts/rockchip/rk356x.dtsi +5 -0
@@ -1808,6 +1808,7 @@ gpio0: gpio@fdd60000 { interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>; gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>;
@@ -1819,6 +1820,7 @@ gpio1: gpio@fe740000 { interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>; gpio-controller; + gpio-ranges = <&pinctrl 0 32 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>;
@@ -1830,6 +1832,7 @@ gpio2: gpio@fe750000 { interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>; gpio-controller; + gpio-ranges = <&pinctrl 0 64 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>;
@@ -1841,6 +1844,7 @@ gpio3: gpio@fe760000 { interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>; gpio-controller; + gpio-ranges = <&pinctrl 0 96 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>;
@@ -1852,6 +1856,7 @@ gpio4: gpio@fe770000 { interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>; gpio-controller; + gpio-ranges = <&pinctrl 0 128 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>;
Signature · 1 line
2.39.2
Quoted 3 lines · John Clark
Add gpio-range properties to the pinctrl gpio nodes in
rk356x.dtsi
Applied, thanks!
[1/1] arm64: dts: rockchip: Add pinctrl gpio-ranges for rk356x
commit: 6f5ab8fa33238fdf6cb28dac7bc2f650db2caf08
Best regards,
Signature · 6 lines
Heiko Stuebner <[email protected]> _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip