Skip to contentSkip to conversation

arm64: dts: mediatek: mt7981: add efuse block

PATCH In review Rafał Miłecki 2 participants 2 messages Apr 30, 2024

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: dts: mediatek: mt7981: add efuse block

From: Rafał Miłecki <[email protected]>

MT7981 (Filogic 820) is a low cost version of MT7986 (Filogic 830) and has efuse compatible with the later one.

---
 arch/arm64/boot/dts/mediatek/mt7981b.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)
arch/arm64/boot/dts/mediatek/mt7981b.dtsi +7 -0
index 2d7f91196e64..a5ea168c8fa7 100644
@@ -133,6 +133,13 @@ pio: pinctrl@11d00000 {
 			#interrupt-cells = <2>;
 		};
 
+		efuse@11f20000 {
+			compatible = "mediatek,mt7986-efuse", "mediatek,efuse";
+			reg = <0 0x11f20000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
 		clock-controller@15000000 {
 			compatible = "mediatek,mt7981-ethsys", "syscon";
 			reg = <0 0x15000000 0 0x1000>;
Signature · 1 line
2.35.3
#1 lore raw

Il 30/04/24 13:29, Rafał Miłecki ha scritto:

Quoted 15 lines

From: Rafał Miłecki <[email protected]>

MT7981 (Filogic 820) is a low cost version of MT7986 (Filogic 830) and has efuse compatible with the later one.

---
  arch/arm64/boot/dts/mediatek/mt7981b.dtsi | 7 +++++++
  1 file changed, 7 insertions(+)
arch/arm64/boot/dts/mediatek/mt7981b.dtsi +0 -0
index 2d7f91196e64..a5ea168c8fa7 100644

arch/arm64/boot/dts/mediatek/mt7981b.dtsi pio: pinctrl@11d00000 { · line 137

Quoted 5 lines
arch/arm64/boot/dts/mediatek/mt7981b.dtsi +2 -0
@@ -133,6 +133,13 @@ pio: pinctrl@11d00000 {
  			#interrupt-cells = <2>;
  		};
 
+		efuse@11f20000 {
+			compatible = "mediatek,mt7986-efuse", "mediatek,efuse";

I'll be honest here - I've been tempted to do "that" way too many times... :-P

..but no, you have to add a "mediatek,mt7981-efuse" compatible to the binding and use that instead of the 7986 one (and I'm sure you understand the reasons too...)

Cheers,
Angelo

Quoted 8 lines
arch/arm64/boot/dts/mediatek/mt7981b.dtsi +5 -0
+			reg = <0 0x11f20000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
  		clock-controller@15000000 {
  			compatible = "mediatek,mt7981-ethsys", "syscon";
  			reg = <0 0x15000000 0 0x1000>;