Skip to contentSkip to conversation

Help with verifier failure

PATCH Brendan Jackman 3 participants 8 messages Apr 21, 2021 – May 7, 2021

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

Hi,

Recently when our internal Clang build was updated to 0e92cbd6a652 we started hitting a verifier issue that I can't see an easy fix for. I've narrowed it down to a minimal reproducer - this email is a patch to add that repro as a prog test (./test_progs -t example).

Here's the BPF code I get from the attached source:

0000000000000000 <exec>:

; int BPF_PROG(exec, struct linux_binprm *bprm) {
       0:       79 11 00 00 00 00 00 00 r1 = *(u64 *)(r1 + 0)
       1:       7b 1a e8 ff 00 00 00 00 *(u64 *)(r10 - 24) = r1
;   uint64_t args_size = bprm->argc & 0xFFFFFFF;
       2:       61 17 58 00 00 00 00 00 r7 = *(u32 *)(r1 + 88)
       3:       b4 01 00 00 00 00 00 00 w1 = 0
;   int map_key = 0;
       4:       63 1a fc ff 00 00 00 00 *(u32 *)(r10 - 4) = r1
       5:       bf a2 00 00 00 00 00 00 r2 = r10
       6:       07 02 00 00 fc ff ff ff r2 += -4
;   void *buf = bpf_map_lookup_elem(&buf_map, &map_key);
       7:       18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll
       9:       85 00 00 00 01 00 00 00 call 1
      10:       7b 0a f0 ff 00 00 00 00 *(u64 *)(r10 - 16) = r0
      11:       57 07 00 00 ff ff ff 0f r7 &= 268435455
      12:       bf 76 00 00 00 00 00 00 r6 = r7
;   if (!buf)
      13:       16 07 12 00 00 00 00 00 if w7 == 0 goto +18 <LBB0_7>
      14:       79 a1 f0 ff 00 00 00 00 r1 = *(u64 *)(r10 - 16)
      15:       15 01 10 00 00 00 00 00 if r1 == 0 goto +16 <LBB0_7>
      16:       b4 09 00 00 00 00 00 00 w9 = 0
      17:       b7 01 00 00 00 10 00 00 r1 = 4096
      18:       bf 68 00 00 00 00 00 00 r8 = r6
      19:       05 00 0e 00 00 00 00 00 goto +14 <LBB0_3>

00000000000000a0 <LBB0_5>:

;     void *src = (void *)(char *)bprm->p + offset;
      20:       79 a1 e8 ff 00 00 00 00 r1 = *(u64 *)(r10 - 24)
      21:       79 13 18 00 00 00 00 00 r3 = *(u64 *)(r1 + 24)
;     uint64_t read_size = args_size - offset;
      22:       0f 73 00 00 00 00 00 00 r3 += r7
      23:       07 03 00 00 00 f0 ff ff r3 += -4096
;     (void) bpf_probe_read_user(buf, read_size, src);
      24:       79 a1 f0 ff 00 00 00 00 r1 = *(u64 *)(r10 - 16)
      25:       85 00 00 00 70 00 00 00 call 112
;   for (int i = 0; i < 512 && offset < args_size; i++) {
      26:       26 09 05 00 fe 01 00 00 if w9 > 510 goto +5 <LBB0_7>
      27:       07 08 00 00 00 f0 ff ff r8 += -4096
      28:       bf 71 00 00 00 00 00 00 r1 = r7
      29:       07 01 00 00 00 10 00 00 r1 += 4096
      30:       04 09 00 00 01 00 00 00 w9 += 1
;   for (int i = 0; i < 512 && offset < args_size; i++) {
      31:       ad 67 02 00 00 00 00 00 if r7 < r6 goto +2 <LBB0_3>

0000000000000100 <LBB0_7>:

; int BPF_PROG(exec, struct linux_binprm *bprm) {
      32:       b4 00 00 00 00 00 00 00 w0 = 0
      33:       95 00 00 00 00 00 00 00 exit

0000000000000110 <LBB0_3>:

      34:       bf 17 00 00 00 00 00 00 r7 = r1
;     (void) bpf_probe_read_user(buf, read_size, src);
      35:       bc 82 00 00 00 00 00 00 w2 = w8
      36:       a5 08 ef ff 00 10 00 00 if r8 < 4096 goto -17 <LBB0_5>
      37:       b4 02 00 00 00 10 00 00 w2 = 4096
      38:       05 00 ed ff 00 00 00 00 goto -19 <LBB0_5>

The full log I get is at
https://gist.githubusercontent.com/bjackman/2928c4ff4cc89545f3993bddd9d5edb2/raw/feda6d7c165d24be3ea72c3cf7045c50246abd83/gistfile1.txt,
but basically the verifier runs through the loop a large number of times, going down the true path of the if (read_size > CHUNK_LEN) every time. Then eventually it takes the false path.

In the disassembly this is basically instructions 35-37 - pseudocode:
w2 = w8

  if (r8 < 4096) {
    w2 = 4096

}

w2 can't exceed 4096 but the verifier doesn't seem to "backpropagate" those bounds from r8 (note the umax_value for R8 goes to 4095 after the branch from 36 to 20, but R2's umax_value is still 266342399)

from 31 to 34: R0_w=inv(id=0) R1_w=inv2097152 R6=inv(id=2,umin_value=2093057,umax_value=268435455,var_off=(0x0; 0xfffffff)) R7_w=inv2093056 R8_w=inv(id=0,umax_value=266342399,var_off=(0x0; 0xfffffff)) R9_w=invP511 R10=fp0 fp-8=mmmm???? fp-16=map_value fp-24=ptr_ ; int BPF_PROG(exec, struct linux_binprm *bprm) {
34: (bf) r7 = r1
; (void) bpf_probe_read_user(buf, read_size, src);
35: (bc) w2 = w8
36: (a5) if r8 < 0x1000 goto pc-17

from 36 to 20: R0_w=inv(id=0) R1_w=inv2097152 R2_w=inv(id=0,umax_value=266342399,var_off=(0x0; 0xfffffff)) R6=inv(id=2,umin_value=2093057,umax_value=268435455,var_off=(0x0; 0xfffffff)) R7_w=inv2097152 R8_w=inv(id=0,umax_value=4095,var_off=(0x0; 0xfff)) R9_w=invP511 R10=fp0 fp-8=mmmm???? fp-16=map_value fp-24=ptr_ ; void *src = (void *)(char *)bprm->p + offset;
20: (79) r1 = *(u64 *)(r10 -24)
21: (79) r3 = *(u64 *)(r1 +24)
; uint64_t read_size = args_size - offset;
22: (0f) r3 += r7
23: (07) r3 += -4096
; (void) bpf_probe_read_user(buf, read_size, src);
24: (79) r1 = *(u64 *)(r10 -16)
25: (85) call bpf_probe_read_user#112
R0_w=inv(id=0) R1_w=map_value(id=0,off=0,ks=4,vs=4096,imm=0) R2_w=inv(id=0,umax_value=266342399,var_off=(0x0; 0xfffffff)) R3_w=inv(id=0) R6=inv(id=2,umin_value=2093057,umax_value=268435455,var_off=(0x0; 0xfffffff)) R7_w=inv2097152 R8_w=inv(id=0,umax_value=4095,var_off=(0x0; 0xfff)) R9_w=invP511 R10=fp0 fp-8=mmmm???? fp-16=map_value fp-24=ptr_ R0_w=inv(id=0) R1_w=map_value(id=0,off=0,ks=4,vs=4096,imm=0) R2_w=inv(id=0,umax_value=266342399,var_off=(0x0; 0xfffffff)) R3_w=inv(id=0) R6=inv(id=2,umin_value=2093057,umax_value=268435455,var_off=(0x0; 0xfffffff)) R7_w=inv2097152 R8_w=inv(id=0,umax_value=4095,var_off=(0x0; 0xfff)) R9_w=invP511 R10=fp0 fp-8=mmmm???? fp-16=map_value fp-24=ptr_
invalid access to map value, value_size=4096 off=0 size=266342399
R1 min value is outside of the allowed memory range
processed 9239 insns (limit 1000000) max_states_per_insn 4 total_states 133 peak_states 133 mark_read 2

This seems like it must be a common pitfall, any idea what we can do to fix it and avoid it in future? Am I misunderstanding the issue?

Cheers,
Brendan

---
 .../selftests/bpf/prog_tests/example.c        | 17 ++++++++
 tools/testing/selftests/bpf/progs/example.c   | 42 +++++++++++++++++++
 2 files changed, 59 insertions(+)
 create mode 100644 tools/testing/selftests/bpf/prog_tests/example.c
 create mode 100644 tools/testing/selftests/bpf/progs/example.c
tools/testing/selftests/bpf/prog_tests/example.c new file +17 -0
new file mode 100644
index 000000000000..9c36858019b3
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <test_progs.h>
+
+#include "example.skel.h"
+
+void test_example(void)
+{
+	struct example *skel;
+	__u32 duration = 0;
+
+	skel = example__open_and_load();
+	if (CHECK(!skel, "skel_load", "couldn't load program\n"))
+		return;
+
+	example__destroy(skel);
+}
tools/testing/selftests/bpf/progs/example.c new file +42 -1

43 lines not on this page · raw message

2.31.1.368.gbe11c130af-goog

#1 lore raw
Quoted 91 lines · Brendan Jackman

Hi,

Recently when our internal Clang build was updated to 0e92cbd6a652 we started hitting a verifier issue that I can't see an easy fix for. I've narrowed it down to a minimal reproducer - this email is a patch to add that repro as a prog test (./test_progs -t example).

Here's the BPF code I get from the attached source:

0000000000000000 <exec>:

; int BPF_PROG(exec, struct linux_binprm *bprm) {
        0:       79 11 00 00 00 00 00 00 r1 = *(u64 *)(r1 + 0)
        1:       7b 1a e8 ff 00 00 00 00 *(u64 *)(r10 - 24) = r1
;   uint64_t args_size = bprm->argc & 0xFFFFFFF;
        2:       61 17 58 00 00 00 00 00 r7 = *(u32 *)(r1 + 88)
        3:       b4 01 00 00 00 00 00 00 w1 = 0
;   int map_key = 0;
        4:       63 1a fc ff 00 00 00 00 *(u32 *)(r10 - 4) = r1
        5:       bf a2 00 00 00 00 00 00 r2 = r10
        6:       07 02 00 00 fc ff ff ff r2 += -4
;   void *buf = bpf_map_lookup_elem(&buf_map, &map_key);
        7:       18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll
        9:       85 00 00 00 01 00 00 00 call 1
       10:       7b 0a f0 ff 00 00 00 00 *(u64 *)(r10 - 16) = r0
       11:       57 07 00 00 ff ff ff 0f r7 &= 268435455
       12:       bf 76 00 00 00 00 00 00 r6 = r7
;   if (!buf)
       13:       16 07 12 00 00 00 00 00 if w7 == 0 goto +18 <LBB0_7>
       14:       79 a1 f0 ff 00 00 00 00 r1 = *(u64 *)(r10 - 16)
       15:       15 01 10 00 00 00 00 00 if r1 == 0 goto +16 <LBB0_7>
       16:       b4 09 00 00 00 00 00 00 w9 = 0
       17:       b7 01 00 00 00 10 00 00 r1 = 4096
       18:       bf 68 00 00 00 00 00 00 r8 = r6
       19:       05 00 0e 00 00 00 00 00 goto +14 <LBB0_3>

00000000000000a0 <LBB0_5>:

;     void *src = (void *)(char *)bprm->p + offset;
       20:       79 a1 e8 ff 00 00 00 00 r1 = *(u64 *)(r10 - 24)
       21:       79 13 18 00 00 00 00 00 r3 = *(u64 *)(r1 + 24)
;     uint64_t read_size = args_size - offset;
       22:       0f 73 00 00 00 00 00 00 r3 += r7
       23:       07 03 00 00 00 f0 ff ff r3 += -4096
;     (void) bpf_probe_read_user(buf, read_size, src);
       24:       79 a1 f0 ff 00 00 00 00 r1 = *(u64 *)(r10 - 16)
       25:       85 00 00 00 70 00 00 00 call 112
;   for (int i = 0; i < 512 && offset < args_size; i++) {
       26:       26 09 05 00 fe 01 00 00 if w9 > 510 goto +5 <LBB0_7>
       27:       07 08 00 00 00 f0 ff ff r8 += -4096
       28:       bf 71 00 00 00 00 00 00 r1 = r7
       29:       07 01 00 00 00 10 00 00 r1 += 4096
       30:       04 09 00 00 01 00 00 00 w9 += 1
;   for (int i = 0; i < 512 && offset < args_size; i++) {
       31:       ad 67 02 00 00 00 00 00 if r7 < r6 goto +2 <LBB0_3>

0000000000000100 <LBB0_7>:

; int BPF_PROG(exec, struct linux_binprm *bprm) {
       32:       b4 00 00 00 00 00 00 00 w0 = 0
       33:       95 00 00 00 00 00 00 00 exit

0000000000000110 <LBB0_3>:

       34:       bf 17 00 00 00 00 00 00 r7 = r1
;     (void) bpf_probe_read_user(buf, read_size, src);
       35:       bc 82 00 00 00 00 00 00 w2 = w8
       36:       a5 08 ef ff 00 10 00 00 if r8 < 4096 goto -17 <LBB0_5>
       37:       b4 02 00 00 00 10 00 00 w2 = 4096
       38:       05 00 ed ff 00 00 00 00 goto -19 <LBB0_5>

The full log I get is at
https://gist.githubusercontent.com/bjackman/2928c4ff4cc89545f3993bddd9d5edb2/raw/feda6d7c165d24be3ea72c3cf7045c50246abd83/gistfile1.txt , but basically the verifier runs through the loop a large number of times, going
down the true path of the if (read_size > CHUNK_LEN) every time. Then
eventually it takes the false path.

In the disassembly this is basically instructions 35-37 - pseudocode:

   w2 = w8
   if (r8 < 4096) {
     w2 = 4096
   }

w2 can't exceed 4096 but the verifier doesn't seem to "backpropagate" those bounds from r8 (note the umax_value for R8 goes to 4095 after the branch from 36 to 20, but R2's umax_value is still 266342399)

from 31 to 34: R0_w=inv(id=0) R1_w=inv2097152 R6=inv(id=2,umin_value=2093057,umax_value=268435455,var_off=(0x0; 0xfffffff)) R7_w=inv2093056 R8_w=inv(id=0,umax_value=266342399,var_off=(0x0; 0xfffffff)) R9_w=invP511 R10=fp0 fp-8=mmmm???? fp-16=map_value fp-24=ptr_ ; int BPF_PROG(exec, struct linux_binprm *bprm) {
34: (bf) r7 = r1
; (void) bpf_probe_read_user(buf, read_size, src);
35: (bc) w2 = w8
36: (a5) if r8 < 0x1000 goto pc-17

Quoted 15 lines

from 36 to 20: R0_w=inv(id=0) R1_w=inv2097152 R2_w=inv(id=0,umax_value=266342399,var_off=(0x0; 0xfffffff)) R6=inv(id=2,umin_value=2093057,umax_value=268435455,var_off=(0x0; 0xfffffff)) R7_w=inv2097152 R8_w=inv(id=0,umax_value=4095,var_off=(0x0; 0xfff)) R9_w=invP511 R10=fp0 fp-8=mmmm???? fp-16=map_value fp-24=ptr_ ; void *src = (void *)(char *)bprm->p + offset;
20: (79) r1 = *(u64 *)(r10 -24)
21: (79) r3 = *(u64 *)(r1 +24)
; uint64_t read_size = args_size - offset;
22: (0f) r3 += r7
23: (07) r3 += -4096
; (void) bpf_probe_read_user(buf, read_size, src);
24: (79) r1 = *(u64 *)(r10 -16)
25: (85) call bpf_probe_read_user#112
R0_w=inv(id=0) R1_w=map_value(id=0,off=0,ks=4,vs=4096,imm=0) R2_w=inv(id=0,umax_value=266342399,var_off=(0x0; 0xfffffff)) R3_w=inv(id=0) R6=inv(id=2,umin_value=2093057,umax_value=268435455,var_off=(0x0; 0xfffffff)) R7_w=inv2097152 R8_w=inv(id=0,umax_value=4095,var_off=(0x0; 0xfff)) R9_w=invP511 R10=fp0 fp-8=mmmm???? fp-16=map_value fp-24=ptr_ R0_w=inv(id=0) R1_w=map_value(id=0,off=0,ks=4,vs=4096,imm=0) R2_w=inv(id=0,umax_value=266342399,var_off=(0x0; 0xfffffff)) R3_w=inv(id=0) R6=inv(id=2,umin_value=2093057,umax_value=268435455,var_off=(0x0; 0xfffffff)) R7_w=inv2097152 R8_w=inv(id=0,umax_value=4095,var_off=(0x0; 0xfff)) R9_w=invP511 R10=fp0 fp-8=mmmm???? fp-16=map_value fp-24=ptr_
invalid access to map value, value_size=4096 off=0 size=266342399
R1 min value is outside of the allowed memory range
processed 9239 insns (limit 1000000) max_states_per_insn 4 total_states 133 peak_states 133 mark_read 2

Thanks, Brendan. Looks at least the verifier failure is triggered by recent clang changes. I will take a look whether we could improve verifier for such a case and whether we could improve clang to avoid generate such codes the verifier doesn't like. Will get back to you once I had concrete analysis.

Quoted 7 lines

This seems like it must be a common pitfall, any idea what we can do to fix it and avoid it in future? Am I misunderstanding the issue?

Cheers,
Brendan

[...]

#2 lore raw
Quoted 110 lines · Yonghong Song
Quoted 91 lines · Brendan Jackman

Hi,

Recently when our internal Clang build was updated to 0e92cbd6a652 we started hitting a verifier issue that I can't see an easy fix for. I've narrowed it down to a minimal reproducer - this email is a patch to add that repro as a prog test (./test_progs -t example).

Here's the BPF code I get from the attached source:

0000000000000000 <exec>:
; int BPF_PROG(exec, struct linux_binprm *bprm) {
        0:       79 11 00 00 00 00 00 00 r1 = *(u64 *)(r1 + 0) 1:       7b 1a e8 ff 00 00 00 00 *(u64 *)(r10 - 24) = r1 ;   uint64_t args_size = bprm->argc & 0xFFFFFFF;
        2:       61 17 58 00 00 00 00 00 r7 = *(u32 *)(r1 + 88) 3:       b4 01 00 00 00 00 00 00 w1 = 0
;   int map_key = 0;
        4:       63 1a fc ff 00 00 00 00 *(u32 *)(r10 - 4) = r1 5:       bf a2 00 00 00 00 00 00 r2 = r10
        6:       07 02 00 00 fc ff ff ff r2 += -4
;   void *buf = bpf_map_lookup_elem(&buf_map, &map_key);
        7:       18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0ll 9:       85 00 00 00 01 00 00 00 call 1
       10:       7b 0a f0 ff 00 00 00 00 *(u64 *)(r10 - 16) = r0 11:       57 07 00 00 ff ff ff 0f r7 &= 268435455
       12:       bf 76 00 00 00 00 00 00 r6 = r7
;   if (!buf)
       13:       16 07 12 00 00 00 00 00 if w7 == 0 goto +18 <LBB0_7> 14:       79 a1 f0 ff 00 00 00 00 r1 = *(u64 *)(r10 - 16) 15:       15 01 10 00 00 00 00 00 if r1 == 0 goto +16 <LBB0_7> 16:       b4 09 00 00 00 00 00 00 w9 = 0
       17:       b7 01 00 00 00 10 00 00 r1 = 4096
       18:       bf 68 00 00 00 00 00 00 r8 = r6
       19:       05 00 0e 00 00 00 00 00 goto +14 <LBB0_3>

00000000000000a0 <LBB0_5>:
;     void *src = (void *)(char *)bprm->p + offset;
       20:       79 a1 e8 ff 00 00 00 00 r1 = *(u64 *)(r10 - 24) 21:       79 13 18 00 00 00 00 00 r3 = *(u64 *)(r1 + 24) ;     uint64_t read_size = args_size - offset;
       22:       0f 73 00 00 00 00 00 00 r3 += r7
       23:       07 03 00 00 00 f0 ff ff r3 += -4096
;     (void) bpf_probe_read_user(buf, read_size, src);
       24:       79 a1 f0 ff 00 00 00 00 r1 = *(u64 *)(r10 - 16) 25:       85 00 00 00 70 00 00 00 call 112
;   for (int i = 0; i < 512 && offset < args_size; i++) { 26:       26 09 05 00 fe 01 00 00 if w9 > 510 goto +5 <LBB0_7> 27:       07 08 00 00 00 f0 ff ff r8 += -4096
       28:       bf 71 00 00 00 00 00 00 r1 = r7
       29:       07 01 00 00 00 10 00 00 r1 += 4096
       30:       04 09 00 00 01 00 00 00 w9 += 1
;   for (int i = 0; i < 512 && offset < args_size; i++) { 31:       ad 67 02 00 00 00 00 00 if r7 < r6 goto +2 <LBB0_3>

0000000000000100 <LBB0_7>:
; int BPF_PROG(exec, struct linux_binprm *bprm) {
       32:       b4 00 00 00 00 00 00 00 w0 = 0
       33:       95 00 00 00 00 00 00 00 exit

0000000000000110 <LBB0_3>:
       34:       bf 17 00 00 00 00 00 00 r7 = r1
;     (void) bpf_probe_read_user(buf, read_size, src);
       35:       bc 82 00 00 00 00 00 00 w2 = w8
       36:       a5 08 ef ff 00 10 00 00 if r8 < 4096 goto -17 <LBB0_5> 37:       b4 02 00 00 00 10 00 00 w2 = 4096
       38:       05 00 ed ff 00 00 00 00 goto -19 <LBB0_5>

The full log I get is at
https://gist.githubusercontent.com/bjackman/2928c4ff4cc89545f3993bddd9d5edb2/raw/feda6d7c165d24be3ea72c3cf7045c50246abd83/gistfile1.txt , but basically the verifier runs through the loop a large number of times,going
down the true path of the if (read_size > CHUNK_LEN) every time. Then
eventually it takes the false path.

In the disassembly this is basically instructions 35-37 - pseudocode:
   w2 = w8
   if (r8 < 4096) {
     w2 = 4096
   }

w2 can't exceed 4096 but the verifier doesn't seem to "backpropagate" those bounds from r8 (note the umax_value for R8 goes to 4095 after the branch from 36 to 20, but R2's umax_value is still 266342399)

from 31 to 34: R0_w=inv(id=0) R1_w=inv2097152 R6=inv(id=2,umin_value=2093057,umax_value=268435455,var_off=(0x0; 0xfffffff)) R7_w=inv2093056 R8_w=inv(id=0,umax_value=266342399,var_off=(0x0; 0xfffffff)) R9_w=invP511 R10=fp0 fp-8=mmmm???? fp-16=map_value fp-24=ptr_ ; int BPF_PROG(exec, struct linux_binprm *bprm) {
34: (bf) r7 = r1
; (void) bpf_probe_read_user(buf, read_size, src);
35: (bc) w2 = w8
36: (a5) if r8 < 0x1000 goto pc-17

Quoted 15 lines

from 36 to 20: R0_w=inv(id=0) R1_w=inv2097152 R2_w=inv(id=0,umax_value=266342399,var_off=(0x0; 0xfffffff)) R6=inv(id=2,umin_value=2093057,umax_value=268435455,var_off=(0x0; 0xfffffff)) R7_w=inv2097152 R8_w=inv(id=0,umax_value=4095,var_off=(0x0; 0xfff)) R9_w=invP511 R10=fp0 fp-8=mmmm???? fp-16=map_value fp-24=ptr_ ; void *src = (void *)(char *)bprm->p + offset;
20: (79) r1 = *(u64 *)(r10 -24)
21: (79) r3 = *(u64 *)(r1 +24)
; uint64_t read_size = args_size - offset;
22: (0f) r3 += r7
23: (07) r3 += -4096
; (void) bpf_probe_read_user(buf, read_size, src);
24: (79) r1 = *(u64 *)(r10 -16)
25: (85) call bpf_probe_read_user#112
  R0_w=inv(id=0) R1_w=map_value(id=0,off=0,ks=4,vs=4096,imm=0) R2_w=inv(id=0,umax_value=266342399,var_off=(0x0; 0xfffffff)) R3_w=inv(id=0) R6=inv(id=2,umin_value=2093057,umax_value=268435455,var_off=(0x0; 0xfffffff)) R7_w=inv2097152 R8_w=inv(id=0,umax_value=4095,var_off=(0x0; 0xfff)) R9_w=invP511 R10=fp0 fp-8=mmmm????fp-16=map_value fp-24=ptr_ R0_w=inv(id=0) R1_w=map_value(id=0,off=0,ks=4,vs=4096,imm=0) R2_w=inv(id=0,umax_value=266342399,var_off=(0x0; 0xfffffff)) R3_w=inv(id=0) R6=inv(id=2,umin_value=2093057,umax_value=268435455,var_off=(0x0; 0xfffffff)) R7_w=inv2097152 R8_w=inv(id=0,umax_value=4095,var_off=(0x0; 0xfff)) R9_w=invP511 R10=fp0 fp-8=mmmm????fp-16=map_value fp-24=ptr_ invalid access to map value, value_size=4096 off=0 size=266342399
R1 min value is outside of the allowed memory range
processed 9239 insns (limit 1000000) max_states_per_insn 4 total_states 133 peak_states 133 mark_read 2

Quoted 9 lines

Thanks, Brendan. Looks at least the verifier failure is triggered by recent clang changes. I will take a look whether we could improve verifier for such a case and whether we could improve clang to avoid generate such codes the verifier doesn't like. Will get back to you once I had concrete analysis.

Quoted 3 lines

This seems like it must be a common pitfall, any idea what we can do to fix it and avoid it in future? Am I misunderstanding the issue?

First, for the example code you provided, I checked with llvm11, llvm12 and latest trunk llvm (llvm13-dev) and they all generated similar codes, which may trigger verifier failure. Somehow you original code could be
different may only show up with a recent llvm, I guess.

Checking llvm IR, the divergence between "w2 = w8" and "if r8 < 0x1000" appears in insn scheduling phase related handling PHIs. Need to further check whether it is possible to prevent the compiler from generating such codes.

The latest kernel already had the ability to track register equivalence.
However, the tracking is conservative for 32bit mov like "w2 = w8" as you described in the above. if we have code like "r2 = r8; if r8 < 0x1000 ...", we will be all good.

The following hack fixed the issue,

kernel/bpf/verifier.c +7 -0
index 58730872f7e5..54f418fd6a4a 100644
@@ -7728,12 +7728,20 @@ static int check_alu_op(struct bpf_verifier_env *env, struct bpf_insn *insn)
                                                insn->src_reg);
                                        return -EACCES;
                                } else if (src_reg->type == SCALAR_VALUE) {
+                                       /* If src_reg is in 32bit range, there is
+                                        * no need to reset the ID.
+                                        */
+                                       bool is_32bit_src = src_reg->umax_value <= 0x7fffffff;
+
+                                       if (is_32bit_src && !src_reg->id)
+                                               src_reg->id = ++env->id_gen;
                                        *dst_reg = *src_reg;
                                        /* Make sure ID is cleared 

otherwise
* dst_reg min/max could be
incorrectly
* propagated into src_reg by
find_equal_scalars()

                                         */
-                                       dst_reg->id = 0;
+                                       if (!is_32bit_src)
+                                               dst_reg->id = 0;
                                        dst_reg->live |= REG_LIVE_WRITTEN;
                                        dst_reg->subreg_def = 
env->insn_idx + 1;
                                } else {

Basically, for a 32bit mov insn like "w2 = w8", if we can ensure that "w8" is 32bit and has no possibility that upper 32bit is set for r8, we can declare them equivalent. This fixed your issue.

Will try to submit a formal patch later.

Quoted 5 lines
Quoted 4 lines

Cheers,
Brendan

[...]

#3 lore raw
Quoted 64 lines · Yonghong Song
Quoted 11 lines · Yonghong Song

On 4/21/21 5:23 AM, Brendan Jackman wrote:
Thanks, Brendan. Looks at least the verifier failure is triggered by recent clang changes. I will take a look whether we could improve verifier for such a case and whether we could improve clang to avoid generate such codes the verifier doesn't like. Will get back to you once I had concrete analysis.

Quoted 4 lines

This seems like it must be a common pitfall, any idea what we can do to fix it
and avoid it in future? Am I misunderstanding the issue?

First, for the example code you provided, I checked with llvm11, llvm12 and latest trunk llvm (llvm13-dev) and they all generated similar codes, which may trigger verifier failure. Somehow you original code could be different may only show up with a recent llvm, I guess.

Checking llvm IR, the divergence between "w2 = w8" and "if r8 < 0x1000" appears in insn scheduling phase related handling PHIs. Need to further check whether it is possible to prevent the compiler from generating such codes.

The latest kernel already had the ability to track register equivalence. However, the tracking is conservative for 32bit mov like "w2 = w8" as you described in the above. if we have code like "r2 = r8; if r8 < 0x1000 ...", we will be all good.

The following hack fixed the issue,

kernel/bpf/verifier.c +1 -0
index 58730872f7e5..54f418fd6a4a 100644
@@ -7728,12 +7728,20 @@ static int check_alu_op(struct bpf_verifier_env
 *env, struct bpf_insn *insn)
                                                 insn->src_reg);
                                         return -EACCES;
                                 } else if (src_reg->type == SCALAR_VALUE) {
+                                       /* If src_reg is in 32bit range,

there is

kernel/bpf/verifier.c +3 -0
+                                        * no need to reset the ID.
+                                        */
+                                       bool is_32bit_src =

src_reg->umax_value <= 0x7fffffff;

kernel/bpf/verifier.c +3 -0
+
+                                       if (is_32bit_src && !src_reg->id)
+                                               src_reg->id = ++env->id_gen;
                                         *dst_reg = *src_reg;
                                         /* Make sure ID is cleared

otherwise
* dst_reg min/max could be
incorrectly
* propagated into src_reg by
find_equal_scalars()

                                          */
kernel/bpf/verifier.c +2 -1
-                                       dst_reg->id = 0;
+                                       if (!is_32bit_src)
+                                               dst_reg->id = 0;
                                         dst_reg->live |= REG_LIVE_WRITTEN;
                                         dst_reg->subreg_def =
env->insn_idx + 1;
                                 } else {
Quoted 5 lines

Basically, for a 32bit mov insn like "w2 = w8", if we can ensure that "w8" is 32bit and has no possibility that upper 32bit is set for r8, we can declare them equivalent. This fixed your issue.

Will try to submit a formal patch later.

Ah.. I did not realise this equivalence tracking with reg.id was there for scalar values! I also didn't take any notice of the use of 32-bit operations in the assembly, thanks for pointing that out.

Yes it sounds like this is certainly worth fixing in the kernel - even if Clang stops generating the code today it will probably start doing so again in the future. I can also help with the verifier work if needed.

#4 lore raw
Quoted 75 lines · Brendan Jackman
Quoted 64 lines · Yonghong Song
Quoted 11 lines · Yonghong Song

On 4/21/21 5:23 AM, Brendan Jackman wrote:
Thanks, Brendan. Looks at least the verifier failure is triggered by recent clang changes. I will take a look whether we could improve verifier for such a case and whether we could improve clang to avoid generate such codes the verifier doesn't like. Will get back to you once I had concrete analysis.

Quoted 4 lines

This seems like it must be a common pitfall, any idea what we can do to fix it
and avoid it in future? Am I misunderstanding the issue?

First, for the example code you provided, I checked with llvm11, llvm12 and latest trunk llvm (llvm13-dev) and they all generated similar codes, which may trigger verifier failure. Somehow you original code could be different may only show up with a recent llvm, I guess.

Checking llvm IR, the divergence between "w2 = w8" and "if r8 < 0x1000" appears in insn scheduling phase related handling PHIs. Need to further check whether it is possible to prevent the compiler from generating such codes.

The latest kernel already had the ability to track register equivalence. However, the tracking is conservative for 32bit mov like "w2 = w8" as you described in the above. if we have code like "r2 = r8; if r8 < 0x1000 ...", we will be all good.

The following hack fixed the issue,

kernel/bpf/verifier.c +1 -0
index 58730872f7e5..54f418fd6a4a 100644
@@ -7728,12 +7728,20 @@ static int check_alu_op(struct bpf_verifier_env
 *env, struct bpf_insn *insn)
                                                  insn->src_reg);
                                          return -EACCES;
                                  } else if (src_reg->type == SCALAR_VALUE) {
+                                       /* If src_reg is in 32bit range,

there is

kernel/bpf/verifier.c +3 -0
+                                        * no need to reset the ID.
+                                        */
+                                       bool is_32bit_src =

src_reg->umax_value <= 0x7fffffff;

kernel/bpf/verifier.c +3 -0
+
+                                       if (is_32bit_src && !src_reg->id)
+                                               src_reg->id = ++env->id_gen;
                                          *dst_reg = *src_reg;
                                          /* Make sure ID is cleared

otherwise
* dst_reg min/max could be
incorrectly
* propagated into src_reg by
find_equal_scalars()

                                           */
kernel/bpf/verifier.c +2 -1
-                                       dst_reg->id = 0;
+                                       if (!is_32bit_src)
+                                               dst_reg->id = 0;
                                          dst_reg->live |= REG_LIVE_WRITTEN;
                                          dst_reg->subreg_def =
env->insn_idx + 1;
                                  } else {
Quoted 5 lines

Basically, for a 32bit mov insn like "w2 = w8", if we can ensure that "w8" is 32bit and has no possibility that upper 32bit is set for r8, we can declare them equivalent. This fixed your issue.

Will try to submit a formal patch later.

Ah.. I did not realise this equivalence tracking with reg.id was there for scalar values! I also didn't take any notice of the use of 32-bit operations in the assembly, thanks for pointing that out.

Quoted 4 lines

Yes it sounds like this is certainly worth fixing in the kernel - even if Clang stops generating the code today it will probably start doing so again in the future. I can also help with the verifier work if needed.

I won't have time for this in the next few days. Considering the current upstream merge window is close, yes, please go head to work on this. Thanks!

#5 lore raw
Quoted 69 lines · Yonghong Song
Quoted 65 lines · Brendan Jackman
Quoted 64 lines · Yonghong Song
Quoted 11 lines · Yonghong Song

On 4/21/21 5:23 AM, Brendan Jackman wrote:
Thanks, Brendan. Looks at least the verifier failure is triggered by recent clang changes. I will take a look whether we could improve verifier for such a case and whether we could improve clang to avoid generate such codes the verifier doesn't like. Will get back to you once I had concrete analysis.

Quoted 4 lines

This seems like it must be a common pitfall, any idea what we can do to fix it
and avoid it in future? Am I misunderstanding the issue?

First, for the example code you provided, I checked with llvm11, llvm12 and latest trunk llvm (llvm13-dev) and they all generated similar codes, which may trigger verifier failure. Somehow you original code could be different may only show up with a recent llvm, I guess.

Checking llvm IR, the divergence between "w2 = w8" and "if r8 < 0x1000" appears in insn scheduling phase related handling PHIs. Need to further check whether it is possible to prevent the compiler from generating such codes.

The latest kernel already had the ability to track register equivalence. However, the tracking is conservative for 32bit mov like "w2 = w8" as you described in the above. if we have code like "r2 = r8; if r8 < 0x1000 ...", we will be all good.

The following hack fixed the issue,

kernel/bpf/verifier.c +1 -0
index 58730872f7e5..54f418fd6a4a 100644
@@ -7728,12 +7728,20 @@ static int check_alu_op(struct bpf_verifier_env
 *env, struct bpf_insn *insn)
                                                  insn->src_reg);
                                          return -EACCES;
                                  } else if (src_reg->type == SCALAR_VALUE) {
+                                       /* If src_reg is in 32bit range,

there is

kernel/bpf/verifier.c +3 -0
+                                        * no need to reset the ID.
+                                        */
+                                       bool is_32bit_src =

src_reg->umax_value <= 0x7fffffff;

kernel/bpf/verifier.c +3 -0
+
+                                       if (is_32bit_src && !src_reg->id)
+                                               src_reg->id = ++env->id_gen;
                                          *dst_reg = *src_reg;
                                          /* Make sure ID is cleared

otherwise
* dst_reg min/max could be
incorrectly
* propagated into src_reg by
find_equal_scalars()

                                           */
kernel/bpf/verifier.c +2 -1
-                                       dst_reg->id = 0;
+                                       if (!is_32bit_src)
+                                               dst_reg->id = 0;
                                          dst_reg->live |= REG_LIVE_WRITTEN;
                                          dst_reg->subreg_def =
env->insn_idx + 1;
                                  } else {
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

Basically, for a 32bit mov insn like "w2 = w8", if we can ensure that "w8" is 32bit and has no possibility that upper 32bit is set for r8, we can declare them equivalent. This fixed your issue.

I just got around to looking into this - spent some time reading and realised it's simpler than I thought :) I also double checked that it fixes the test with my current Clang too.

Beyond cleaning up and putting it into a patch, did you have anything in particular in mind when you called this a "hack"?

Do I understand correctly that in this code we only need to check umax_value, because it anyway gets folded into the other bounds fields during adjust_min_max_reg_vals?

It seems like the next rung on the "ladder" of solution completeness here would be quite a big step up, something like a more comprehensive representation of register relationships (instead of just "these regs have the same value" vs. "these regs have no relationship"), which I guess would be more extreme than necessary right now.

#6 lore raw
Quoted 78 lines · Brendan Jackman
Quoted 69 lines · Yonghong Song
Quoted 65 lines · Brendan Jackman
Quoted 64 lines · Yonghong Song
Quoted 11 lines · Yonghong Song

On 4/21/21 5:23 AM, Brendan Jackman wrote:
Thanks, Brendan. Looks at least the verifier failure is triggered by recent clang changes. I will take a look whether we could improve verifier for such a case and whether we could improve clang to avoid generate such codes the verifier doesn't like. Will get back to you once I had concrete analysis.

Quoted 4 lines

This seems like it must be a common pitfall, any idea what we can do to fix it
and avoid it in future? Am I misunderstanding the issue?

First, for the example code you provided, I checked with llvm11, llvm12 and latest trunk llvm (llvm13-dev) and they all generated similar codes, which may trigger verifier failure. Somehow you original code could be different may only show up with a recent llvm, I guess.

Checking llvm IR, the divergence between "w2 = w8" and "if r8 < 0x1000" appears in insn scheduling phase related handling PHIs. Need to further check whether it is possible to prevent the compiler from generating such codes.

The latest kernel already had the ability to track register equivalence. However, the tracking is conservative for 32bit mov like "w2 = w8" as you described in the above. if we have code like "r2 = r8; if r8 < 0x1000 ...", we will be all good.

The following hack fixed the issue,

kernel/bpf/verifier.c +1 -0
index 58730872f7e5..54f418fd6a4a 100644
@@ -7728,12 +7728,20 @@ static int check_alu_op(struct bpf_verifier_env
 *env, struct bpf_insn *insn)
                                                   insn->src_reg);
                                           return -EACCES;
                                   } else if (src_reg->type == SCALAR_VALUE) {
+                                       /* If src_reg is in 32bit range,

there is

kernel/bpf/verifier.c +3 -0
+                                        * no need to reset the ID.
+                                        */
+                                       bool is_32bit_src =

src_reg->umax_value <= 0x7fffffff;

kernel/bpf/verifier.c +3 -0
+
+                                       if (is_32bit_src && !src_reg->id)
+                                               src_reg->id = ++env->id_gen;
                                           *dst_reg = *src_reg;
                                           /* Make sure ID is cleared

otherwise
* dst_reg min/max could be
incorrectly
* propagated into src_reg by
find_equal_scalars()

                                            */
kernel/bpf/verifier.c +2 -1
-                                       dst_reg->id = 0;
+                                       if (!is_32bit_src)
+                                               dst_reg->id = 0;
                                           dst_reg->live |= REG_LIVE_WRITTEN;
                                           dst_reg->subreg_def =
env->insn_idx + 1;
                                   } else {
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

Basically, for a 32bit mov insn like "w2 = w8", if we can ensure that "w8" is 32bit and has no possibility that upper 32bit is set for r8, we can declare them equivalent. This fixed your issue.

I just got around to looking into this - spent some time reading and realised it's simpler than I thought :) I also double checked that it fixes the test with my current Clang too.

Quoted 6 lines

Beyond cleaning up and putting it into a patch, did you have anything in particular in mind when you called this a "hack"?

Do I understand correctly that in this code we only need to check umax_value, because it anyway gets folded into the other bounds fields during adjust_min_max_reg_vals?

If the umax_value is less than or equal to INT_MAX, if all *_value's are consistent in the register state, yes, it will be sufficient to declare the reg is indeed holding a 32bit value in a 64bit register.

I mentioned it as a "hack" as I did not go through all the reg range refining before/after this piece of codes. Since you have looked at it and it seems fine. I would suggest you can just with my patch above plus your test and submit it to the mailing list for review.

Quoted 6 lines

It seems like the next rung on the "ladder" of solution completeness here would be quite a big step up, something like a more comprehensive representation of register relationships (instead of just "these regs have the same value" vs. "these regs have no relationship"), which I guess would be more extreme than necessary right now.

We have to weigh between verifier complexity and whether it is general enough for compilation transformation. Yes, if you have such use cases, please share and we can discuss how to address them.

#7 lore raw
In reply to Brendan Jackman
Quoted 9 lines · Brendan Jackman

Hi,

Recently when our internal Clang build was updated to 0e92cbd6a652 we started hitting a verifier issue that I can't see an easy fix for. I've narrowed it down to a minimal reproducer - this email is a patch to add that repro as a prog test (./test_progs -t example).

Here's the BPF code I get from the attached source:

[...]

Quoted 28 lines

w2 can't exceed 4096 but the verifier doesn't seem to "backpropagate" those bounds from r8 (note the umax_value for R8 goes to 4095 after the branch from 36 to 20, but R2's umax_value is still 266342399)

from 31 to 34: R0_w=inv(id=0) R1_w=inv2097152 R6=inv(id=2,umin_value=2093057,umax_value=268435455,var_off=(0x0; 0xfffffff)) R7_w=inv2093056 R8_w=inv(id=0,umax_value=266342399,var_off=(0x0; 0xfffffff)) R9_w=invP511 R10=fp0 fp-8=mmmm???? fp-16=map_value fp-24=ptr_ ; int BPF_PROG(exec, struct linux_binprm *bprm) {
34: (bf) r7 = r1
; (void) bpf_probe_read_user(buf, read_size, src);
35: (bc) w2 = w8
36: (a5) if r8 < 0x1000 goto pc-17

from 36 to 20: R0_w=inv(id=0) R1_w=inv2097152 R2_w=inv(id=0,umax_value=266342399,var_off=(0x0; 0xfffffff)) R6=inv(id=2,umin_value=2093057,umax_value=268435455,var_off=(0x0; 0xfffffff)) R7_w=inv2097152 R8_w=inv(id=0,umax_value=4095,var_off=(0x0; 0xfff)) R9_w=invP511 R10=fp0 fp-8=mmmm???? fp-16=map_value fp-24=ptr_ ; void *src = (void *)(char *)bprm->p + offset;
20: (79) r1 = *(u64 *)(r10 -24)
21: (79) r3 = *(u64 *)(r1 +24)
; uint64_t read_size = args_size - offset;
22: (0f) r3 += r7
23: (07) r3 += -4096
; (void) bpf_probe_read_user(buf, read_size, src);
24: (79) r1 = *(u64 *)(r10 -16)
25: (85) call bpf_probe_read_user#112
R0_w=inv(id=0) R1_w=map_value(id=0,off=0,ks=4,vs=4096,imm=0) R2_w=inv(id=0,umax_value=266342399,var_off=(0x0; 0xfffffff)) R3_w=inv(id=0) R6=inv(id=2,umin_value=2093057,umax_value=268435455,var_off=(0x0; 0xfffffff)) R7_w=inv2097152 R8_w=inv(id=0,umax_value=4095,var_off=(0x0; 0xfff)) R9_w=invP511 R10=fp0 fp-8=mmmm???? fp-16=map_value fp-24=ptr_ R0_w=inv(id=0) R1_w=map_value(id=0,off=0,ks=4,vs=4096,imm=0) R2_w=inv(id=0,umax_value=266342399,var_off=(0x0; 0xfffffff)) R3_w=inv(id=0) R6=inv(id=2,umin_value=2093057,umax_value=268435455,var_off=(0x0; 0xfffffff)) R7_w=inv2097152 R8_w=inv(id=0,umax_value=4095,var_off=(0x0; 0xfff)) R9_w=invP511 R10=fp0 fp-8=mmmm???? fp-16=map_value fp-24=ptr_
invalid access to map value, value_size=4096 off=0 size=266342399
R1 min value is outside of the allowed memory range
processed 9239 insns (limit 1000000) max_states_per_insn 4 total_states 133 peak_states 133 mark_read 2

Quoted 2 lines

This seems like it must be a common pitfall, any idea what we can do to fix it and avoid it in future? Am I misunderstanding the issue?

We also hit this from time to time. I have asm blocks to work-around at the moment. I was going to see how ugly propagating the bounds backwards gets. I had some code for this some time ago but never pushed it, it was smashed in with some CFG building for loops back before loops were possible. I can take a look next week unless someone beats me there.

Quoted 4 lines

Cheers,
Brendan