Skip to contentSkip to conversation

arm64: dts: ti: am64-phyboard-electra: Add overlay to enable a GPIO fan

PATCH Applied Nathan Morrisson 3 participants 3 messages Apr 19, 2024 – Apr 26, 2024

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: dts: ti: am64-phyboard-electra: Add overlay to enable a GPIO fan

The phyBOARD-Electra has a GPIO fan header. This overlay enables the fan header and sets the fan to turn on at 65C.

---
 arch/arm64/boot/dts/ti/Makefile               |  4 ++
 .../k3-am642-phyboard-electra-gpio-fan.dtso   | 50 +++++++++++++++++++
 2 files changed, 54 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-gpio-fan.dtso
arch/arm64/boot/dts/ti/Makefile +4 -0
index 9a722c2473fb..fd91cf40af6d 100644
@@ -48,6 +48,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-hummingboard-t.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-hummingboard-t-pcie.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-hummingboard-t-usb3.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-gpio-fan.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
@@ -131,6 +132,8 @@ k3-am62p5-sk-csi2-tevi-ov5640-dtbs := k3-am62p5-sk.dtb \
 	k3-am62x-sk-csi2-tevi-ov5640.dtbo
 k3-am642-evm-icssg1-dualemac-dtbs := \
 	k3-am642-evm.dtb k3-am642-evm-icssg1-dualemac.dtbo
+k3-am642-phyboard-electra-gpio-fan-dtbs := \
+	k3-am642-phyboard-electra-rdk.dtb k3-am642-phyboard-electra-gpio-fan.dtbo
 k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \
 	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
 k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \
@@ -174,6 +177,7 @@ DTC_FLAGS_k3-am62-lp-sk += -@
 DTC_FLAGS_k3-am62a7-sk += -@
 DTC_FLAGS_k3-am62p5-sk += -@
 DTC_FLAGS_k3-am642-evm += -@
+DTC_FLAGS_k3-am642-phyboard-electra-rdk += -@
 DTC_FLAGS_k3-am642-tqma64xxl-mbax4xxl += -@
 DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@
 DTC_FLAGS_k3-am68-sk-base-board += -@
arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-gpio-fan.dtso new file +50 -0

50 lines not on this page · raw message

Signature · 1 line
2.25.1
Reviewed-by on v1 1/1
#1 lore raw

Am 19.04.24 um 21:31 schrieb Nathan Morrisson:

Quoted 4 lines

The phyBOARD-Electra has a GPIO fan header. This overlay enables the fan header and sets the fan to turn on at 65C.

Quoted 91 lines
---
  arch/arm64/boot/dts/ti/Makefile               |  4 ++
  .../k3-am642-phyboard-electra-gpio-fan.dtso   | 50 +++++++++++++++++++
  2 files changed, 54 insertions(+)

create mode 100644 arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-gpio-fan.dtso

arch/arm64/boot/dts/ti/Makefile +4 -0
index 9a722c2473fb..fd91cf40af6d 100644
@@ -48,6 +48,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-hummingboard-t.dtb
  dtb-$(CONFIG_ARCH_K3) += k3-am642-hummingboard-t-pcie.dtb
  dtb-$(CONFIG_ARCH_K3) += k3-am642-hummingboard-t-usb3.dtb
  dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-gpio-fan.dtbo
  dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb
  dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb
  dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
@@ -131,6 +132,8 @@ k3-am62p5-sk-csi2-tevi-ov5640-dtbs := k3-am62p5-sk.dtb \
  	k3-am62x-sk-csi2-tevi-ov5640.dtbo
  k3-am642-evm-icssg1-dualemac-dtbs := \
  	k3-am642-evm.dtb k3-am642-evm-icssg1-dualemac.dtbo
+k3-am642-phyboard-electra-gpio-fan-dtbs := \
+	k3-am642-phyboard-electra-rdk.dtb k3-am642-phyboard-electra-gpio-fan.dtbo
  k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \
  	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
  k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \
@@ -174,6 +177,7 @@ DTC_FLAGS_k3-am62-lp-sk += -@
  DTC_FLAGS_k3-am62a7-sk += -@
  DTC_FLAGS_k3-am62p5-sk += -@
  DTC_FLAGS_k3-am642-evm += -@
+DTC_FLAGS_k3-am642-phyboard-electra-rdk += -@
  DTC_FLAGS_k3-am642-tqma64xxl-mbax4xxl += -@
  DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@
  DTC_FLAGS_k3-am68-sk-base-board += -@
arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-gpio-fan.dtso new file +50 -0
new file mode 100644
index 000000000000..5057658061b4
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2024 PHYTEC America LLC
+ * Author: Nathan Morrisson <[email protected]>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+	fan: gpio-fan {
+		compatible = "gpio-fan";
+		gpio-fan,speed-map = <0 0 8600 1>;
+		gpios = <&main_gpio0 28 GPIO_ACTIVE_LOW>;
+		#cooling-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_fan_pins_default>;
+	};
+};
+
+&main_pmx0 {
+	gpio_fan_pins_default: gpio-fan-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x070, PIN_OUTPUT, 7) /* (V18) GPMC0_AD13.GPIO0_28 */
+		>;
+	};
+};
+
+&thermal_zones {
+	main0_thermal: main0-thermal {
+		trips {
+			main0_thermal_trip0: main0-thermal-trip {
+				temperature = <65000>;  /* millicelsius */
+				hysteresis = <2000>;    /* millicelsius */
+				type = "active";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&main0_thermal_trip0>;
+				cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
maintainer Applied
#2 lore raw
In reply to Nathan Morrisson

Hi Nathan Morrisson,

Quoted 4 lines · Nathan Morrisson

The phyBOARD-Electra has a GPIO fan header. This overlay enables the fan header and sets the fan to turn on at 65C.

I have applied the following to branch ti-k3-dts-next on [1]. Thank you!

[1/1] arm64: dts: ti: am64-phyboard-electra: Add overlay to enable a GPIO fan

      commit: 9198fbfc14797a3a39c758ac6fb96a2169cbb70d

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git

Signature · 3 lines
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D