usb-storage: Fix BlockConf defaults
PATCH 1/1 usb-storage: Fix BlockConf defaults
Commit 30896374 started to pass the full BlockConf from usb-storage to scsi-disk, while previously only a few select properties would be forwarded. This enables the user to set more properties, e.g. the block size, that are actually taking effect.
However, now the calls to blkconf_apply_backend_options() and blkconf_blocksizes() in usb_msd_storage_realize() that modify some of these properties take effect, too, instead of being silently ignored. This means at least that the block sizes get an unconditional default of 512 bytes before the configuration is passed to scsi-disk.
Before commit 30896374, the property wouldn't be set for scsi-disk and therefore the device dependent defaults would apply - 512 for scsi-hd, but 2048 for scsi-cd. The latter default has now become 512, too, which makes at least Windows 11 installation fail when installing from usb-storage.
Fix this by simply not calling these functions any more in usb-storage and passing BlockConf on unmodified (except for the BlockBackend). The same functions are called by the SCSI code anyway and it sets the right defaults for the actual media type.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2260
---
Considering this a candidate for 9.0 given that we're already having an rc4, it's a regression from 8.2 and breaks installing Windows from USB
hw/usb/dev-storage-classic.c | 9 --------- 1 file changed, 9 deletions(-)
hw/usb/dev-storage-classic.c +0 -9
@@ -38,15 +38,6 @@ static void usb_msd_storage_realize(USBDevice *dev, Error **errp)return ; } -if (!blkconf_blocksizes (&s->conf, errp)) { -return ; - } - -if (!blkconf_apply_backend_options (&s->conf, !blk_supports_write_perm (blk), - true, errp)) { -return ; - } -/* * Hack alert: this pretends to be a block device, but it's really * a SCSI bus that can serve only a single device, which it
Signature · 1 line
2.44.0
Quoted 24 lines · Kevin Wolf
Commit 30896374 started to pass the full BlockConf from usb-storage to scsi-disk, while previously only a few select properties would be forwarded. This enables the user to set more properties, e.g. the block size, that are actually taking effect.
However, now the calls to
blkconf_apply_backend_options()andblkconf_blocksizes()inusb_msd_storage_realize()that modify some of these properties take effect, too, instead of being silently ignored. This means at least that the block sizes get an unconditional default of 512 bytes before the configuration is passed to scsi-disk.Before commit 30896374, the property wouldn't be set for scsi-disk and therefore the device dependent defaults would apply - 512 for scsi-hd, but 2048 for scsi-cd. The latter default has now become 512, too, which makes at least Windows 11 installation fail when installing from usb-storage.
Fix this by simply not calling these functions any more in usb-storage and passing BlockConf on unmodified (except for the BlockBackend). The same functions are called by the SCSI code anyway and it sets the right defaults for the actual media type.
Fixes 308963746169 ('scsi: Don't ignore most usb-storage properties')Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2260
Quoted 8 lines
Reported-by Jonas SvenssonSigned-off-by Kevin Wolf <[email protected]>---
Considering this a candidate for 9.0 given that we're already having an rc4, it's a regression from 8.2 and breaks installing Windows from USBhw/usb/dev-storage-classic.c | 9 --------- 1 file changed, 9 deletions(-)
Quoted 32 lines · Hanna Czenczek
Quoted 30 lines · Kevin Wolf
Commit 30896374 started to pass the full BlockConf from usb-storage to scsi-disk, while previously only a few select properties would be forwarded. This enables the user to set more properties, e.g. the block size, that are actually taking effect.
However, now the calls to
blkconf_apply_backend_options()andblkconf_blocksizes()inusb_msd_storage_realize()that modify some of these properties take effect, too, instead of being silently ignored. This means at least that the block sizes get an unconditional default of 512 bytes before the configuration is passed to scsi-disk.Before commit 30896374, the property wouldn't be set for scsi-disk and therefore the device dependent defaults would apply - 512 for scsi-hd, but 2048 for scsi-cd. The latter default has now become 512, too, which makes at least Windows 11 installation fail when installing from usb-storage.
Fix this by simply not calling these functions any more in usb-storage and passing BlockConf on unmodified (except for the BlockBackend). The same functions are called by the SCSI code anyway and it sets the right defaults for the actual media type.
Fixes 308963746169 ('scsi: Don't ignore most usb-storage properties')Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2260
Reported-by Jonas SvenssonSigned-off-by Kevin Wolf <[email protected]>---
Considering this a candidate for 9.0 given that we're already having an rc4, it's a regression from 8.2 and breaks installing Windows from USB
Quoted 4 lines
Quoted 2 lines
hw/usb/dev-storage-classic.c | 9 --------- 1 file changed, 9 deletions(-)Reviewed-by Hanna Czenczek <[email protected]>
Thanks; I've now applied this to git directly (following discussion with Kevin on IRC.)
-- PMM