Add hci_le_set_advertising_parameters to hci_lib
Subsystems (2)
PATCH 1/1 Add hci_le_set_advertising_parameters to hci_lib
Hi everyone
I am currently developing an utility that puts the Marvell 88W8887 chip in 'Wake on Low-Energy' mode, and I need to set LE advertising parameters with HCI commands to do so, using hci_lib.
I noticed that all required data structures and defines are already present in hci.h to implement this command, but I couldn't find any implementation in lib/hci_lib.h and lib/hci.c
I made the implementation of the function on my side and tested it on my setup, and I figured you could be interested.
I don't know if there is any specific reason this particular function was not implemented.
Regards,
Maxime Chevallier
Signed-off-by Maxime Chevallier <[email protected]>
--- lib/hci.c | 39 +++++++++++++++++++++++++++++++++++++++ lib/hci_lib.h | 5 +++++ 2 files changed, 44 insertions(+)
lib/hci.c +39 -0
@@ -2996,6 +2996,45 @@ int hci_le_set_advertise_enable(int dd, uint8_t enable, int to)return 0 ; } +int hci_le_set_advertising_parameters (int dd,uint16_t min_interval, +uint16_t max_interval,uint8_t advtype, +uint8_t own_bdaddr_type,uint8_t direct_bdaddr_type, +const bdaddr_t *direct_bdaddr,uint8_t chan_map, +uint8_t filter,int to) +{ +struct hci_request rq; +le_set_advertising_parameters_cp param_cp; +uint8_t status; + +memset (¶m_cp,0 ,sizeof (param_cp)); + param_cp.min_interval = min_interval; + param_cp.max_interval = max_interval; + param_cp.advtype = advtype; + param_cp.own_bdaddr_type = own_bdaddr_type; + param_cp.direct_bdaddr_type = direct_bdaddr_type; +bacpy (¶m_cp.direct_bdaddr, direct_bdaddr); + param_cp.chan_map = chan_map; + param_cp.filter = filter; + +memset (&rq,0 ,sizeof (rq)); + rq.ogf =OGF_LE_CTL ; + rq.ocf =OCF_LE_SET_ADVERTISING_PARAMETERS ; + rq.cparam = ¶m_cp; + rq.clen =LE_SET_ADVERTISING_PARAMETERS_CP_SIZE ; + rq.rparam = &status; + rq.rlen =1 ; + +if (hci_send_req (dd, &rq, to) <0 ) +return -1 ; + +if (status) { + errno =EIO ; +return -1 ; + } + +return 0 ; +} + int hci_le_create_conn(int dd, uint16_t interval, uint16_t window, uint8_t initiator_filter, uint8_t peer_bdaddr_type, bdaddr_t peer_bdaddr, uint8_t own_bdaddr_type,
lib/hci_lib.h +5 -0
@@ -120,6 +120,11 @@ int hci_le_set_scan_parameters(int dev_id, uint8_t type, uint16_t interval, uint16_t window, uint8_t own_type, uint8_t filter, int to);int hci_le_set_advertise_enable (int dev_id,uint8_t enable,int to); +int hci_le_set_advertising_parameters (int dd,uint16_t min_interval, +uint16_t max_interval,uint8_t advtype, +uint8_t own_bdaddr_type,uint8_t direct_bdaddr_type, +const bdaddr_t *direct_bdaddr,uint8_t chan_map, +uint8_t filter,int to); int hci_le_create_conn(int dd, uint16_t interval, uint16_t window, uint8_t initiator_filter, uint8_t peer_bdaddr_type, bdaddr_t peer_bdaddr, uint8_t own_bdaddr_type,
Signature · 1 line
2.1.4