WinTV HVR-900 (usb 2040:6500) (model 65008) / no audio but clicking noise
Hi!
Now I bought a Hauppauge WinTV HVR-900 (USB, DVB-T/analog Hybrid).
video is ok...
But: Audio sounds almost as bad as before (with that Pinnacle stick):
http://www.wgboome.de./hvr900.wav
I used this mplayer command:
mplayer -tv driver=v4l2:input=0:width=768:height=576:device=/dev/video2:alsa=1:forceaudio=1:adevice=hw.1:audiorate=48000:immediatemode=0:amode=0:norm=pal:chanlist=europe-west:freq=280
tv://
The difference to the Pinnacle thingy is:
The correct audio isnt even in the background...
I hear just that clicking noise...
What did I do wrong?
PS: With my PCI PVR-250 i have no problem...
Thx.
Bye
Arne
A message that is not in the archive (sent off-list or not yet received): 1298716431.18744.0.camel@localhost
Quoted 2 lines · yesterday i
Now I bought a Hauppauge WinTV HVR-900 (USB, DVB-T/analog Hybrid).
today i found that i have quite good DVB-T connectivity... but sometimes there r too many errors...
so i m still interested in analog tv...
after some rebooting and
after i dropped a lot of firmware files from
http://konstantin.filtschew.de/v4l-firmware/firmware_v3.tgz into /lib/firmware (in addition to xc3028-v27.fw)
i can hear the analog audio,
but from time to time there is still this strong clicking noise...
example: http://www.wgboome.de./20110226,hvr.mpg (i blurred the picture due to copyright considerations...)...
could it be that i use the wrong amux?
i found that theory here (but i dont know if i can just change the kernel module):
http://www.freak-search.com/de/thread/332374/linux-dvb_em28xx-audio_hvr-900_b3c0_id_20406502_hauppa
-arne