Increase CAN max bitrate for phyCORE-AM62x and phyCORE-am64x
Subsystems (2)
cover Increase CAN max bitrate for phyCORE-AM62x and phyCORE-am64x
Nathan Morrisson (2):
arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Increase CAN max bitrate
arm64: dts: ti: k3-am642-phyboard-electra-rdk: Increase CAN max
bitrate
arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts | 2 +- arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
Signature · 1 line
2.25.1
PATCH 1/2 arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Increase CAN max bitrate
The phyBOARD-Lyra has one TCAN1044VDD CAN transceiver which supports CAN FD at 8 Mbps.
Increase the maximum bitrate to 8 Mbps.
--- arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts +1 -1
@@ -31,7 +31,7 @@ aliases { can_tc1: can-phy0 { compatible = "ti,tcan1042"; #phy-cells = <0>; - max-bitrate = <5000000>; + max-bitrate = <8000000>; standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>; };
Signature · 1 line
2.25.1
PATCH 2/2 arm64: dts: ti: k3-am642-phyboard-electra-rdk: Increase CAN max bitrate
In reply to Nathan MorrissonThe phyBOARD-Electra has two TCAN1044VDD CAN transceivers which support CAN FD at 8 Mbps.
Increase the maximum bitrate to 8 Mbps.
--- arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts +2 -2
@@ -42,7 +42,7 @@ can_tc1: can-phy0 { pinctrl-names = "default"; pinctrl-0 = <&can_tc1_pins_default>; #phy-cells = <0>; - max-bitrate = <5000000>; + max-bitrate = <8000000>; standby-gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>; };
@@ -51,7 +51,7 @@ can_tc2: can-phy1 { pinctrl-names = "default"; pinctrl-0 = <&can_tc2_pins_default>; #phy-cells = <0>; - max-bitrate = <5000000>; + max-bitrate = <8000000>; standby-gpios = <&main_gpio0 35 GPIO_ACTIVE_HIGH>; };
Signature · 1 line
2.25.1
Nishanth Menon
maintainerRe: [PATCH 2/2] arm64: dts: ti: k3-am642-phyboard-electra-rdk: Increase CAN max bitrate
Quoted 35 lines · Nathan Morrisson
The phyBOARD-Electra has two TCAN1044VDD CAN transceivers which support CAN FD at 8 Mbps.
Increase the maximum bitrate to 8 Mbps.
Signed-off-by Nathan Morrisson <[email protected]>--- arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts +2
-2@@ -42,7 +42,7 @@ can_tc1: can-phy0 { pinctrl-names = "default"; pinctrl-0 = <&can_tc1_pins_default>; #phy-cells = <0>; - max-bitrate = <5000000>; + max-bitrate = <8000000>; standby-gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>; };@@ -51,7 +51,7 @@ can_tc2: can-phy1 { pinctrl-names = "default"; pinctrl-0 = <&can_tc2_pins_default>; #phy-cells = <0>; - max-bitrate = <5000000>; + max-bitrate = <8000000>; standby-gpios = <&main_gpio0 35 GPIO_ACTIVE_HIGH>; };Signature · 1 line
2.25.1
This is better at arch/arm64/boot/dts/ti/k3-am62p-main.dtsi.
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Nishanth Menon
maintainerRe: [PATCH 2/2] arm64: dts: ti: k3-am642-phyboard-electra-rdk: Increase CAN max bitrate
Quoted 33 lines · Nishanth Menon
Quoted 32 lines · Nathan Morrisson
The phyBOARD-Electra has two TCAN1044VDD CAN transceivers which support CAN FD at 8 Mbps.
Increase the maximum bitrate to 8 Mbps.
Signed-off-by Nathan Morrisson <[email protected]>--- arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts +2
-2@@ -42,7 +42,7 @@ can_tc1: can-phy0 { pinctrl-names = "default"; pinctrl-0 = <&can_tc1_pins_default>; #phy-cells = <0>; - max-bitrate = <5000000>; + max-bitrate = <8000000>; standby-gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>; };@@ -51,7 +51,7 @@ can_tc2: can-phy1 { pinctrl-names = "default"; pinctrl-0 = <&can_tc2_pins_default>; #phy-cells = <0>; - max-bitrate = <5000000>; + max-bitrate = <8000000>; standby-gpios = <&main_gpio0 35 GPIO_ACTIVE_HIGH>; };
Quoted 9 lines
Quoted 3 lines
Signature · 1 line
2.25.1This is better at
arch/arm64/boot/dts/ti/k3-am62p-main.dtsi.
Woops.. wrong mail thread. :( Apologies on the spam.
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Re: [PATCH 2/2] arm64: dts: ti: k3-am642-phyboard-electra-rdk: Increase CAN max bitrate
In reply to Nathan MorrissonAm 02.04.24 um 18:08 schrieb Nathan Morrisson:
Quoted 6 lines
The phyBOARD-Electra has two TCAN1044VDD CAN transceivers which support CAN FD at 8 Mbps.
Increase the maximum bitrate to 8 Mbps.
Signed-off-by Nathan Morrisson <[email protected]>
For both patches
Quoted 18 lines
--- arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts +1
-1@@ -42,7 +42,7 @@ can_tc1: can-phy0 { pinctrl-names = "default"; pinctrl-0 = <&can_tc1_pins_default>; #phy-cells = <0>; - max-bitrate = <5000000>; + max-bitrate = <8000000>; standby-gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>; };
arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts can_tc2: can-phy1 { · line 57
Quoted 8 lines
arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts +1
-1@@ -51,7 +51,7 @@ can_tc2: can-phy1 { pinctrl-names = "default"; pinctrl-0 = <&can_tc2_pins_default>; #phy-cells = <0>; - max-bitrate = <5000000>; + max-bitrate = <8000000>; standby-gpios = <&main_gpio0 35 GPIO_ACTIVE_HIGH>; };
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Hi Nathan Morrisson,
Quoted 10 lines · Nathan Morrisson
Nathan Morrisson (2):
arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Increase CAN max bitrate
arm64: dts: ti: k3-am642-phyboard-electra-rdk: Increase CAN max
bitrate
arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts| 2 +-arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)[...]
I have applied the following to branch ti-k3-dts-next on [1]. Thank you!
[1/2] arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Increase CAN max bitrate
commit: 3de136cd0d601e6051aae86903e0e83077a436c3
[2/2] arm64: dts: ti: k3-am642-phyboard-electra-rdk: Increase CAN max bitrate
commit: f360d7f8bb7b115103017f406aa90605781fb05cAll being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D