Regarding Pressure sensors for atmospheric, station, and barometric pressures.
Subsystems (2)
Hello [email protected],
In reference to:
https://www.kernel.org/doc/Documentation/ABI/testing/sysfs-bus-iio
There is this section:
What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_raw
What: /sys/bus/iio/devices/iio:deviceX/in_pressure_raw
KernelVersion: 3.8
Contact: [email protected]
Description:
Raw pressure measurement from channel Y. Units after application of scale and offset are kilopascal.
What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_input
What: /sys/bus/iio/devices/iio:deviceX/in_pressure_input
KernelVersion: 3.8
Contact: [email protected]
Description:
Scaled pressure measurement from channel Y, in kilopascal.
What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_raw
KernelVersion: 3.14
Contact: [email protected]
Description:
Raw humidity measurement of air. Units after application of scale and offset are milli percent.
What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_input
KernelVersion: 3.14
Contact: [email protected]
Description:
Scaled humidity measurement in milli percent.
Nowhere do I find the unit kilopascal used in atmospheric pressure. To stick with International System of Units and its Prefixes
https://en.wikipedia.org/wiki/International_System_of_Units#Prefixes
The standard unit for used in atmospheric pressure measurements or readings is the hectopascal (hPa), in meteorology, for atmospheric pressure, the modern equivalent of the traditional millibar.
What would it take to make this change to the standard for
https://www.kernel.org/doc/Documentation/ABI/testing/sysfs-bus-iio ?
Thank you.
Signature · 1 line
Bruce Mitchell
Hello Guenter,
I've been asked to expand the To list to include you and hwmon.
In reference to:
https://www.kernel.org/doc/Documentation/ABI/testing/sysfs-bus-iio
There is this section:
What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_raw
What: /sys/bus/iio/devices/iio:deviceX/in_pressure_raw
KernelVersion: 3.8
Contact: [email protected]
Description:
Raw pressure measurement from channel Y. Units after application of scale and offset are kilopascal.
What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_input
What: /sys/bus/iio/devices/iio:deviceX/in_pressure_input
KernelVersion: 3.8
Contact: [email protected]
Description:
Scaled pressure measurement from channel Y, in kilopascal.
What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_raw
KernelVersion: 3.14
Contact: [email protected]
Description:
Raw humidity measurement of air. Units after application of scale and offset are milli percent.
What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_input
KernelVersion: 3.14
Contact: [email protected]
Description:
Scaled humidity measurement in milli percent.
Nowhere do I find the unit kilopascal used in atmospheric pressure. To stick with International System of Units and its Prefixes
https://en.wikipedia.org/wiki/International_System_of_Units#Prefixes
The standard unit for used in atmospheric pressure measurements or readings is the hectopascal (hPa), in meteorology, for atmospheric pressure, the modern equivalent of the traditional millibar.
What would it take to make this change to the standard for
https://www.kernel.org/doc/Documentation/ABI/testing/sysfs-bus-iio ?
Thank you.
Signature · 1 line
Bruce Mitchell
Hi Bruce,
Quoted 42 lines · Bruce Mitchell
Hello Guenter,
I've been asked to expand the To list to include you and hwmon.
In reference to:
https://www.kernel.org/doc/Documentation/ABI/testing/sysfs-bus-iioThere is this section:
What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_raw What: /sys/bus/iio/devices/iio:deviceX/in_pressure_raw KernelVersion: 3.8 Contact: [email protected]Description:
Raw pressure measurement from channel Y. Units after application of scale and offset are kilopascal.What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_input What: /sys/bus/iio/devices/iio:deviceX/in_pressure_input KernelVersion: 3.8 Contact: [email protected]Description:
Scaled pressure measurement from channel Y, in kilopascal.What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_raw KernelVersion: 3.14 Contact: [email protected]Description:
Raw humidity measurement of air. Units after application of scale and offset are milli percent.What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_input KernelVersion: 3.14 Contact: [email protected]Description:
Scaled humidity measurement in milli percent.Nowhere do I find the unit kilopascal used in atmospheric pressure. To stick with International System of Units and its Prefixes
https://en.wikipedia.org/wiki/International_System_of_Units#Prefixes
Quoted 7 lines
The standard unit for used in atmospheric pressure measurements or readings is the hectopascal (hPa), in meteorology, for atmospheric pressure, the modern equivalent of the traditional millibar.
What would it take to make this change to the standard for
https://www.kernel.org/doc/Documentation/ABI/testing/sysfs-bus-iio ?
The short answer is "you don't". The ABI states that pressure is reported in kilopascal, not in hectopascal. We can't change the ABI because existing user space code depends on it. Changing it would be equivalent to changing the ABI for, say, temperature from degrees C to degrees F, or Kelvin.
Quite frankly I don't see your problem. 1 kilopascal = 10 hectopascal. Take the reported number and multiply by 10. What am I missing ?
Obviously I _am_ missing the entire discussion so far, so my response may be completely off track. If so, my apologies for the noise.
Thanks,
Guenter
Quoted 59 lines · Guenter Roeck
Hi Bruce,
Quoted 42 lines · Bruce Mitchell
Hello Guenter,
I've been asked to expand the To list to include you and hwmon.
In reference to:
https://www.kernel.org/doc/Documentation/ABI/testing/sysfs-bus-iioThere is this section:
What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_raw What: /sys/bus/iio/devices/iio:deviceX/in_pressure_raw KernelVersion: 3.8 Contact: [email protected]Description:
Raw pressure measurement from channel Y. Units after application of scale and offset are kilopascal.What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_input What: /sys/bus/iio/devices/iio:deviceX/in_pressure_input KernelVersion: 3.8 Contact: [email protected]Description:
Scaled pressure measurement from channel Y, in kilopascal.What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_raw KernelVersion: 3.14 Contact: [email protected]Description:
Raw humidity measurement of air. Units after application of scale and offset are milli percent.What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_input KernelVersion: 3.14 Contact: [email protected]Description:
Scaled humidity measurement in milli percent.Nowhere do I find the unit kilopascal used in atmospheric pressure. To stick with International System of Units and its Prefixes
https://en.wikipedia.org/wiki/International_System_of_Units#PrefixesQuoted 7 lines
The standard unit for used in atmospheric pressure measurements or readings is the hectopascal (hPa), in meteorology, for atmospheric pressure, the modern equivalent of the traditional millibar.
What would it take to make this change to the standard for
https://www.kernel.org/doc/Documentation/ABI/testing/sysfs-bus-iio ?The short answer is "you don't". The ABI states that pressure is reported in kilopascal, not in hectopascal. We can't change the ABI because existing user space code depends on it. Changing it would be equivalent to changing the ABI for, say, temperature from degrees C to degrees F, or Kelvin.
Quoted 9 lines
Quite frankly I don't see your problem. 1 kilopascal = 10 hectopascal. Take the reported number and multiply by 10. What am I missing ?
Obviously I _am_ missing the entire discussion so far, so my response may be completely off track. If so, my apologies for the noise.
Thanks,
Guenter
Thank you Guenter, I don't have a problem scaling, as you suggest.
But if I don't ask I know I have a guaranteed NO. I feel it is better to ask now and know the answer and deal with it appropriately.
Signature · 1 line
Bruce