Skip to contentSkip to conversation

Why Cache flush required in some ARM Cortex boards to enable D cache?

U-Boot akshay ts 2 participants 3 messages Sep 9, 2009 – Sep 11, 2009

lore
Share & tools
lore

akshay ts

author
#0 lore raw

Hi,
I ran into problems when i enabled D cache. But later i found out that cache flush was required before enabling D Cache. What i dont understand is why is it required?. Since earlier D cache is never enabled and so nothing should be present in the cache. Flushing is only required during context switch/may be interrupts?.
I tried with omap3 board with Arm cortex A8 on it, it worked without a cache flush. I tried with C110 with Arm cortex A8 on it, i had to do a cache flush to make D cache work.
Also if possible please tell me what is a GP device, OMAP3 (CONTROL_STATUS register) seems to be a GP device and hence they are skipping cache flush. I dont know what is this.

Warm Regards,
Akshay

Love Cricket? Check out live scores, photos, video highlights and more. Click here http://cricket.yahoo.com

#1 lore raw
Quoted 2 lines · akshay ts

Hi,
I ran into problems when i enabled D cache. But later i found out that cache flush was required before enabling D Cache.

Flush or invalidate? See below...

Quoted 3 lines

What i dont understand is why is it required?. Since earlier D cache is never enabled and so nothing should be present in the cache.
Flushing is only required during context switch/may be interrupts?.
I tried with omap3 board with Arm cortex A8 on it, it worked without a cache flush. I tried with C110 with Arm cortex A8 on it, i had to do a cache flush to make D cache work.

There was some info on this at Linux ARM kernel mailing list:

http://www.spinics.net/lists/arm-kernel/msg71406.html

Seems that it depends on how silicon (reset?) is implemented.

Quoted 1 line

Also if possible please tell me what is a GP device, OMAP3 (CONTROL_STATUS register) seems to be a GP device and hence they are skipping cache flush. I dont know what is this.

GP is "general purpose". Anybody might correct me, but I think these are OMAPs where (HW) security features you might need in mobile applications are disabled. So depending if you buy low quantity OMAPs for general purpose use (I think called "catalog products") or in large OEM quantities you might get OMAPs with different (security) features enabled in HW or not. BeagleBoard uses GP devices.

Best regards

Dirk

author
#2 lore raw

Hi Dirk,

Thanks i got some useful information.

Warm Regards,
Akshay

Quoted 42 lines · Dirk Behme

From: Dirk Behme <[email protected]>
Subject: Re: [U-Boot] Why Cache flush required in some ARM Cortex boards to enable D cache?
To: "akshay ts" <[email protected]>
Cc: u-boot at lists.denx.de
Date: Thursday, 10 September, 2009, 12:14 AM

Quoted 2 lines · akshay ts

Hi,
I ran into problems when i enabled D cache. But later

i found out that cache flush was required before enabling D Cache.

Flush or invalidate? See below...

Quoted 1 line

What i dont understand is why is it required?. Since

earlier D cache is never enabled and so nothing should be present in the cache. Flushing is only required during context switch/may be interrupts?. I tried with omap3 board with Arm cortex A8 on it, it worked without a cache flush. I tried with C110 with Arm cortex A8 on it, i had to do a cache flush to make D cache work.

There was some info on this at Linux ARM kernel mailing list:

http://www.spinics.net/lists/arm-kernel/msg71406.html

Seems that it depends on how silicon (reset?) is implemented.

Quoted 1 line

Also if possible please tell me what is a GP device,

OMAP3 (CONTROL_STATUS register) seems to be a GP device and hence they are skipping cache flush. I dont know what is this.

GP is "general purpose". Anybody might correct me, but I think these are OMAPs where (HW) security features you might need in mobile applications are disabled. So depending if you buy low quantity OMAPs for general purpose use (I think called "catalog products") or in large OEM quantities you might get OMAPs with different (security) features enabled in HW or not. BeagleBoard uses GP devices.

Quoted 4 lines

Best regards

Dirk

See the Web&#39;s breaking stories, chosen by people like you. Check out Yahoo! Buzz. http://in.buzz.yahoo.com/