Skip to contentSkip to conversation

Renesas drop leading 0x from rpc nodes

PATCH Superseded Lad Prabhakar 3 participants 12 messages Nov 18, 2020 – Nov 29, 2020 Arm (32-bit)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

cover Renesas drop leading 0x from rpc nodes

Hi All,

This patch series drops leading 0x from rpc nodes.

Cheers,
Prabhakar

Lad Prabhakar (8):
ARM: dts: r8a77965-u-boot: Remove leading 0x from rpc node
ARM: dts: r8a77990-u-boot: Remove leading 0x from rpc node
ARM: dts: 8a77980-u-boot: Remove leading 0x from rpc node
M: dts: r8a77950-u-boot: Remove leading 0x from rpc node
ARM: dts: r8a77960-u-boot: Remove leading 0x from rpc node
ARM: dts: r8a77995-u-boot: Remove leading 0x from rpc node
ARM: dts: r8a77970-u-boot: Remove leading 0x from rpc node
ARM: dts: r7s72100-gr-peach-u-boot: Remove leading 0x from rpc node

 arch/arm/dts/r7s72100-gr-peach-u-boot.dts | 2 +-
 arch/arm/dts/r8a77950-u-boot.dtsi         | 2 +-
 arch/arm/dts/r8a77960-u-boot.dtsi         | 2 +-
 arch/arm/dts/r8a77965-u-boot.dtsi         | 2 +-
 arch/arm/dts/r8a77970-u-boot.dtsi         | 2 +-
 arch/arm/dts/r8a77980-u-boot.dtsi         | 2 +-
 arch/arm/dts/r8a77990-u-boot.dtsi         | 2 +-
 arch/arm/dts/r8a77995-u-boot.dtsi         | 2 +-
 8 files changed, 8 insertions(+), 8 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/8 ARM: dts: r8a77965-u-boot: Remove leading 0x from rpc node

Remove the leading "0x" from rpc node to fix the below dtc warning:

Warning (simple_bus_reg): Node /soc/rpc at 0xee200000 simple-bus unit address format error, expected "ee200000"

---
 arch/arm/dts/r8a77965-u-boot.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/dts/r8a77965-u-boot.dtsi +1 -1
index 33ff5b148b..9cc6f20537 100644
@@ -13,7 +13,7 @@
 
 / {
 	soc {
-		rpc: rpc at 0xee200000 {
+		rpc: rpc at ee200000 {
 			compatible = "renesas,rpc-r8a77965", "renesas,rpc";
 			reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0>;
 			clocks = <&cpg CPG_MOD 917>;
Signature · 1 line
2.17.1
#2 lore raw

PATCH 2/8 ARM: dts: r8a77990-u-boot: Remove leading 0x from rpc node

In reply to Lad Prabhakar

Remove the leading "0x" from rpc node to fix the below dtc warning:

Warning (simple_bus_reg): Node /soc/rpc at 0xee200000 simple-bus unit address format error, expected "ee200000"

---
 arch/arm/dts/r8a77990-u-boot.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/dts/r8a77990-u-boot.dtsi +1 -1
index ddf8b62627..6655abe875 100644
@@ -9,7 +9,7 @@
 
 / {
 	soc {
-		rpc: rpc at 0xee200000 {
+		rpc: rpc at ee200000 {
 			compatible = "renesas,rpc-r8a77990", "renesas,rpc";
 			reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0>;
 			clocks = <&cpg CPG_MOD 917>;
Signature · 1 line
2.17.1
#3 lore raw

PATCH 3/8 ARM: dts: 8a77980-u-boot: Remove leading 0x from rpc node

In reply to Lad Prabhakar

Remove the leading "0x" from rpc node to fix the below dtc warning:

Warning (simple_bus_reg): Node /soc/rpc at 0xee200000 simple-bus unit address format error, expected "ee200000"

---
 arch/arm/dts/r8a77980-u-boot.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/dts/r8a77980-u-boot.dtsi +1 -1
index 1050f6e991..365d40ac49 100644
@@ -13,7 +13,7 @@
 
 / {
 	soc {
-		rpc: rpc at 0xee200000 {
+		rpc: rpc at ee200000 {
 			compatible = "renesas,rpc-r8a77980", "renesas,rpc";
 			reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0>;
 			clocks = <&cpg CPG_MOD 917>;
Signature · 1 line
2.17.1
#4 lore raw

PATCH 4/8 M: dts: r8a77950-u-boot: Remove leading 0x from rpc node

In reply to Lad Prabhakar

Remove the leading "0x" from rpc node to fix the below dtc warning:

Warning (simple_bus_reg): Node /soc/rpc at 0xee200000 simple-bus unit address format error, expected "ee200000"

---
 arch/arm/dts/r8a77950-u-boot.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/dts/r8a77950-u-boot.dtsi +1 -1
index 0317f47f0f..5a11651464 100644
@@ -13,7 +13,7 @@
 
 / {
 	soc {
-		rpc: rpc at 0xee200000 {
+		rpc: rpc at ee200000 {
 			compatible = "renesas,rpc-r8a7795", "renesas,rpc";
 			reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0>;
 			clocks = <&cpg CPG_MOD 917>;
Signature · 1 line
2.17.1
#5 lore raw

PATCH 4/8 M: dts: r8a77950-u-boot: Remove leading 0x from rpc node

Hi Marek,

Quoted 8 lines

-----Original Message-----
From: Lad Prabhakar <[email protected]>
Sent: 18 November 2020 11:29
To: Marek Vasut <[email protected]>; u-boot at lists.denx.de
Cc: Biju Das <[email protected]>; Prabhakar <[email protected]>; Prabhakar Mahadev Lad <[email protected]>
Subject: [PATCH 4/8] M: dts: r8a77950-u-boot: Remove leading 0x from rpc node

I missed the typo in the subject s/M/ARM shall I just resend this patch if that's OK with you.

Cheers,
Prabhakar

Quoted 25 lines

Remove the leading "0x" from rpc node to fix the below dtc warning:

Warning (simple_bus_reg): Node /soc/rpc at 0xee200000 simple-bus unit address format error, expected "ee200000"

---
 arch/arm/dts/r8a77950-u-boot.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/dts/r8a77950-u-boot.dtsi +1 -2
index 0317f47f0f..5a11651464 100644
@@ -13,7 +13,7 @@
 
 / {
 	soc {
-		rpc: rpc at 0xee200000 {
+		rpc: rpc at ee200000 {
 			compatible = "renesas,rpc-r8a7795", "renesas,rpc";
 			reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0>;
 			clocks = <&cpg CPG_MOD 917>;
--

2.17.1

#6 lore raw

PATCH 4/8 M: dts: r8a77950-u-boot: Remove leading 0x from rpc node

On 11/18/20 12:32 PM, Prabhakar Mahadev Lad wrote:

[...]

Quoted 3 lines
Quoted 2 lines

Subject: [PATCH 4/8] M: dts: r8a77950-u-boot: Remove leading 0x from rpc node

I missed the typo in the subject s/M/ARM shall I just resend this patch if that's OK with you.

If you could squash all the RPC fixes into a single patch and send that as one patch -- since they are all fixing the exact same problem -- that would help.

Thanks

#7 lore raw

PATCH 4/8 M: dts: r8a77950-u-boot: Remove leading 0x from rpc node

Hi Marek,

Thank you for the review.

Quoted 5 lines · Marek Vasut

On 11/18/20 12:32 PM, Prabhakar Mahadev Lad wrote:

[...]

Quoted 8 lines
Quoted 3 lines
Quoted 2 lines

Subject: [PATCH 4/8] M: dts: r8a77950-u-boot: Remove leading 0x from rpc node

I missed the typo in the subject s/M/ARM shall I just resend this patch if that's OK with you.

If you could squash all the RPC fixes into a single patch and send that as one patch -- since they are all fixing the exact same problem -- that would help.

Done posted a v2.

Cheers,
Prabhakar

#8 lore raw

PATCH 5/8 ARM: dts: r8a77960-u-boot: Remove leading 0x from rpc node

In reply to Lad Prabhakar

Remove the leading "0x" from rpc node to fix the below dtc warning:

Warning (simple_bus_reg): Node /soc/rpc at 0xee200000 simple-bus unit address format error, expected "ee200000"

---
 arch/arm/dts/r8a77960-u-boot.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/dts/r8a77960-u-boot.dtsi +1 -1
index 826c2384bc..f1cae1c359 100644
@@ -13,7 +13,7 @@
 
 / {
 	soc {
-		rpc: rpc at 0xee200000 {
+		rpc: rpc at ee200000 {
 			compatible = "renesas,rpc-r8a7796", "renesas,rpc";
 			reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0>;
 			clocks = <&cpg CPG_MOD 917>;
Signature · 1 line
2.17.1
#9 lore raw

PATCH 6/8 ARM: dts: r8a77995-u-boot: Remove leading 0x from rpc node

In reply to Lad Prabhakar

Remove the leading "0x" from rpc node to fix the below dtc warning:

Warning (simple_bus_reg): Node /soc/rpc at 0xee200000 simple-bus unit address format error, expected "ee200000"

---
 arch/arm/dts/r8a77995-u-boot.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/dts/r8a77995-u-boot.dtsi +1 -1
index 8e9f6b7a7d..0917a80f09 100644
@@ -9,7 +9,7 @@
 
 / {
 	soc {
-		rpc: rpc at 0xee200000 {
+		rpc: rpc at ee200000 {
 			compatible = "renesas,rpc-r8a77995", "renesas,rpc";
 			reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0>;
 			clocks = <&cpg CPG_MOD 917>;
Signature · 1 line
2.17.1
#10 lore raw

PATCH 7/8 ARM: dts: r8a77970-u-boot: Remove leading 0x from rpc node

In reply to Lad Prabhakar

Remove the leading "0x" from rpc node to fix the below dtc warning:

Warning (simple_bus_reg): Node /soc/rpc at 0xee200000 simple-bus unit address format error, expected "ee200000"

---
 arch/arm/dts/r8a77970-u-boot.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/dts/r8a77970-u-boot.dtsi +1 -1
index eabab7ce58..ac3c6be4ad 100644
@@ -13,7 +13,7 @@
 
 / {
 	soc {
-		rpc: rpc at 0xee200000 {
+		rpc: rpc at ee200000 {
 			compatible = "renesas,rpc-r8a77970", "renesas,rpc";
 			reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0>;
 			clocks = <&cpg CPG_MOD 917>;
Signature · 1 line
2.17.1
#11 lore raw

PATCH 8/8 ARM: dts: r7s72100-gr-peach-u-boot: Remove leading 0x from rpc node

In reply to Lad Prabhakar

Remove the leading "0x" from rpc node to fix the below dtc warning:

Warning (simple_bus_reg): Node /soc/rpc at 0xee200000 simple-bus unit address format error, expected "ee200000"

---
 arch/arm/dts/r7s72100-gr-peach-u-boot.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/dts/r7s72100-gr-peach-u-boot.dts +1 -1
index 30e35e47d6..f48121a9a8 100644
@@ -46,7 +46,7 @@
 	};
 
 
-	rpc: rpc at 0xee200000 {
+	rpc: rpc at ee200000 {
 		compatible = "renesas,rpc-r7s72100", "renesas,rpc";
 		reg = <0x3fefa000 0x100>, <0x18000000 0x08000000>;
 		bank-width = <2>;
Signature · 1 line
2.17.1