r8169: fix handling ether_clk
Heiner Kallweit
maintainerPATCH 1/1 r8169: fix handling ether_clk
Petr reported that system freezes on r8169 driver load on a system using ether_clk. The original change was done under the assumption that the clock isn't needed for basic operations like chip register access. But obviously that was wrong.
Therefore effectively revert the original change, and in addition leave the clock active when suspending and WoL is enabled. Chip may not be able to process incoming packets otherwise.
--- drivers/net/ethernet/realtek/r8169_main.c | 32 ++++++++++++++--------- 1 file changed, 19 insertions(+), 13 deletions(-)
drivers/net/ethernet/realtek/r8169_main.c +19 -13
@@ -2236,14 +2236,10 @@ static void rtl_pll_power_down(struct rtl8169_private *tp)default :break ; } - -clk_disable_unprepare (tp->clk); }static void rtl_pll_power_up (struct rtl8169_private *tp) { -clk_prepare_enable (tp->clk); -switch (tp->mac_version) { case RTL_GIGA_MAC_VER_25 ... RTL_GIGA_MAC_VER_33:case RTL_GIGA_MAC_VER_37 :
@@ -4820,29 +4816,39 @@ static void rtl8169_net_suspend(struct rtl8169_private *tp)#ifdef CONFIG_PM +static int rtl8169_net_resume (struct rtl8169_private *tp) +{ +rtl_rar_set (tp, tp->dev->dev_addr); + +if (tp->TxDescArray) +rtl8169_up (tp); + +netif_device_attach (tp->dev); + +return 0 ; +} +static int __maybe_unused rtl8169_suspend (struct device *device) {struct rtl8169_private *tp =dev_get_drvdata (device);rtnl_lock ();rtl8169_net_suspend (tp); +if (!device_may_wakeup (tp_to_dev (tp))) +clk_disable_unprepare (tp->clk);rtnl_unlock ();return 0 ; } -static int rtl8169_resume (struct device *device) +static int __maybe_unused rtl8169_resume (struct device *device) {struct rtl8169_private *tp =dev_get_drvdata (device); -rtl_rar_set (tp, tp->dev->dev_addr); - -if (tp->TxDescArray) -rtl8169_up (tp); +if (!device_may_wakeup (tp_to_dev (tp))) +clk_prepare_enable (tp->clk); -netif_device_attach (tp->dev); - -return 0 ; +return rtl8169_net_resume (tp); }static int rtl8169_runtime_suspend (struct device *device)
@@ -4868,7 +4874,7 @@ static int rtl8169_runtime_resume(struct device *device)__rtl8169_set_wol (tp, tp->saved_wolopts); -return rtl8169_resume (device); +return rtl8169_net_resume (tp); }static int rtl8169_runtime_idle (struct device *device)
Signature · 1 line
2.28.0
Hi,
Quoted 8 lines · Heiner Kallweit
Petr reported that system freezes on r8169 driver load on a system using
ether_clk. The original change was done under the assumption that the clock isn't needed for basic operations like chip register access. But obviously that was wrong.
Therefore effectively revert the original change, and in addition leave the clock active when suspending and WoL is enabled. Chip may not be able to process incoming packets otherwise.
Quoted 4 lines
Fixes 9f0b54cd1672 ("r8169: move switching optional clock on/off to pll power functions")Reported-by Petr Tesarik <[email protected]>Tested-by Petr Tesarik <[email protected]>Signed-off-by Heiner Kallweit <[email protected]>
Thank you.
Patch looks good to me:
Regards,
Hans
Quoted 81 lines
--- drivers/net/ethernet/realtek/r8169_main.c | 32 ++++++++++++++--------- 1 file changed, 19 insertions(+), 13 deletions(-)drivers/net/ethernet/realtek/r8169_main.c +19
-13@@ -2236,14 +2236,10 @@ static void rtl_pll_power_down(struct rtl8169_private *tp)default :break ; } - -clk_disable_unprepare (tp->clk); }static void rtl_pll_power_up (struct rtl8169_private *tp) { -clk_prepare_enable (tp->clk); -switch (tp->mac_version) { case RTL_GIGA_MAC_VER_25 ... RTL_GIGA_MAC_VER_33:case RTL_GIGA_MAC_VER_37 :@@ -4820,29 +4816,39 @@ static void rtl8169_net_suspend(struct rtl8169_private *tp)#ifdef CONFIG_PM +static int rtl8169_net_resume (struct rtl8169_private *tp) +{ +rtl_rar_set (tp, tp->dev->dev_addr); + +if (tp->TxDescArray) +rtl8169_up (tp); + +netif_device_attach (tp->dev); + +return 0 ; +} +static int __maybe_unused rtl8169_suspend (struct device *device) {struct rtl8169_private *tp =dev_get_drvdata (device);rtnl_lock ();rtl8169_net_suspend (tp); +if (!device_may_wakeup (tp_to_dev (tp))) +clk_disable_unprepare (tp->clk);rtnl_unlock ();return 0 ; } -static int rtl8169_resume (struct device *device) +static int __maybe_unused rtl8169_resume (struct device *device) {struct rtl8169_private *tp =dev_get_drvdata (device); -rtl_rar_set (tp, tp->dev->dev_addr); - -if (tp->TxDescArray) -rtl8169_up (tp); +if (!device_may_wakeup (tp_to_dev (tp))) +clk_prepare_enable (tp->clk); -netif_device_attach (tp->dev); - -return 0 ; +return rtl8169_net_resume (tp); }static int rtl8169_runtime_suspend (struct device *device)@@ -4868,7 +4874,7 @@ static int rtl8169_runtime_resume(struct device *device)__rtl8169_set_wol (tp, tp->saved_wolopts); -return rtl8169_resume (device); +return rtl8169_net_resume (tp); }static int rtl8169_runtime_idle (struct device *device)
From: Heiner Kallweit <[email protected]>
Date: Thu, 1 Oct 2020 08:44:19 +0200
Quoted 8 lines
Petr reported that system freezes on r8169 driver load on a system using
ether_clk. The original change was done under the assumption that the clock isn't needed for basic operations like chip register access. But obviously that was wrong.
Therefore effectively revert the original change, and in addition leave the clock active when suspending and WoL is enabled. Chip may not be able to process incoming packets otherwise.
Quoted 4 lines
Fixes 9f0b54cd1672 ("r8169: move switching optional clock on/off to pll power functions")Reported-by Petr Tesarik <[email protected]>Tested-by Petr Tesarik <[email protected]>Signed-off-by Heiner Kallweit <[email protected]>
Applied.