Skip to contentSkip to conversation

Deadlock/crash with Quad tulip card in 2.4

DISCUSSION Yann Dupont 2 participants 3 messages May 10, 2001 – May 11, 2001

lore
Share & tools
lore
#0 lore raw

Hello. I'm having problem with Quad eth100 tulip (digital 21140) cards.

The machine was acting as a bridge with kernel 2.2 very reliably.

Now, when I boot 2.4.4-ac6, the machine hangs - no oops, nothing. Just hang.

even CTRL-Scroll lock does nothing.

I supected a bridge problem (I know 2.2 & 2.4 bridge are different) But it's not the case as I reproduce the bug on another machine (with another motherboard. kernel 2.4.4-ac6 where the bridge is not configured.)

single boot is OK,

ifconfig eth0 up is ok (MII negotiation is OK)
ifconfig eth1 up crash the machine -

on another boot i tried this :

ifconfig eth0 up
ifconfig eth0 down

ifconfig eth1 up is OK
ifconfig eth1 down ... etc etc

This works as long as only one interface is up.

If only 1 interface is up, the machine works reliably.

just putting 2 interfaces up hang the machine.

Can this be an IRQ sharing / bridge problem ??? (all interface shares the same IRQ and are after a bridge)

I don't know if this is ac-series specific. I'll try tomorrow.

Any Idea how I can test further ? Without oops it's not easy...

Yann Dupont.

Signature · 4 lines
\|/ ____ \|/ Fac. des sciences de Nantes-Linux-Python-IPv6-ATM-BONOM....
"@'/ ,. \@"  Tel :(+33) [0]251125865(AM)[0]251125857(PM)[0]251125868(Fax)
/_| \__/ |_\ [email protected]
   \__U_/    http://www.unantes.univ-nantes.fr/~dupont
#1 lore raw
Quoted 1 line · Yann Dupont

Hello. I'm having problem with Quad eth100 tulip (digital 21140) cards.

Unfortuantely a recent merge of the latest Becker code fixed these chips (and 2104[01]), and promptly broke support for other, more popular chips. :(

I'm working on fixing this right now; until then, the "de4x5" driver should work for you.

Signature · 3 lines
Jeff Garzik      | Game called on account of naked chick
Building 1024    |
MandrakeSoft     |
#2 lore raw
Quoted 5 lines · Jeff Garzik

Yann Dupont wrote:

I'm working on fixing this right now; until then, the "de4x5" driver should work for you.

Yes that's true, it's working like a charm now. I didn't know the de4x5 driver was working on 4 port Ethernet 21140...

Thanks for the quick answer.

Signature · 4 lines
\|/ ____ \|/ Fac. des sciences de Nantes-Linux-Python-IPv6-ATM-BONOM....
"@'/ ,. \@"  Tel :(+33) [0]251125865(AM)[0]251125857(PM)[0]251125868(Fax)
/_| \__/ |_\ [email protected]
   \__U_/    http://www.unantes.univ-nantes.fr/~dupont