hang on disk discovery
My box hangs during disk discovery.
Here is what I have in dmesg:
VP_IDE: IDE controller on PCI bus 00 dev 39VP_IDE: chipset revision 6VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxVP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:DMA
HPT370: IDE controller on PCI bus 00 dev 70
HPT370: chipset revision 3
HPT370: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0xc800-0xc807, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0xc808-0xc80f, BIOS settings: hdg:pio, hdh:piohd1: C/H/S=0/0/0 from BIOS ignored
hda: ST36531A, ATA DISK drive
hdb: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
hdc: HITACHI DVD-ROM GD-7500, ATAPI CD/DVD-ROM drive
hdd: LG CD-RW CED-8080B, ATAPI CD/DVD-ROM drive
Then it hangs there. If I push the power button, either it continues to boot normally, or it resets, or nothing happens.
If it continues booting, I have:
hde: ST340824A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xb800-0xb807,0xbc02 on irq 11
hda: 12706470 sectors (6506 MB) w/128KiB Cache, CHS=6204/64/32, UDMA(33)
hde: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(100)
etc.
It happens with 2.4.9-ac7 and 2.4.8-ac7, but not with 2.4.5-ac19 and previous (and not with 2.2 series).
I tried booting with noapic, it doesn't change anything.
I have an ABit VP6 (dual PIII, VIA chipset), ACPI in kernel, I just put --no-mem-option in grub to see if it changes anything but no. The only intersting thing in dmesg seems the "unexpected IO-APIC". How can I help ?
Xav
Quoted 4 lines
I have an ABit VP6 (dual PIII, VIA chipset), ACPI in kernel, I just put --no-mem-option in grub to see if it changes anything but no. The only intersting thing in dmesg seems the "unexpected IO-APIC". How can I help ?
Ok firstly try disabling ACPI. If that doesnt help see if booting "noapic" helps
Quoted 7 lines · Alan Cox
Quoted 4 lines
I have an ABit VP6 (dual PIII, VIA chipset), ACPI in kernel, I just put --no-mem-option in grub to see if it changes anything but no. The only intersting thing in dmesg seems the "unexpected IO-APIC". How can I help ?
Ok firstly try disabling ACPI. If that doesnt help see if booting "noapic" helps
OK, it works well after disabling ACPI, thanks.
Anything quick I can do to help debug this ?
Quoted 2 lines
OK, it works well after disabling ACPI, thanks.
Anything quick I can do to help debug this ?
Report it to the ACPI list (see maintainers)