Skip to contentSkip to conversation

Linux Preemptive patch success 2.4.10-pre4 + lots of other

DISCUSSION Robert Love 1 participant 1 message Sep 8, 2001 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 4 lines · Dieter Nützel

I've tested your former patch against 2.4.7-acX and sent you some feedback but you didn't answered my post.

Is the module problem (missing preempt_xxx symbols) thing fixed?

I am not sure what module problem you are talking about. There was a bug in my original patch that caused a link error in most situations where CONFIG_MODULE was set, but this had to do with atomic_dec_and_lock, not preempt_xxx -- what preempt_xxx symbols?

Anyhow, I suggest you grab 2.4.9-ac10 and
http://tech9.net/rml/linux/patch-rml-2.4.9-ac10-preempt-kernel-1 and enable CONFIG_PREEMPT and give that a whirl. You should have no problems on a UP system.

Quoted 2 lines

Aside from that I saw some nice speed increase (UP Athlon) and very snappy system.

Very glad. Especially to hear there are no problems on Athlon.

Quoted 1 line

dbench-1.1 32 clients load drops to mostly below 16 (33 before)

Great. Data points such as this are welcome. What about the actual throughput? Both I and Nigel (see http://kpreempt.sourceforge.net)
benched the patch with `dbench -16' and we both got decent throughput increase.

Quoted 1 line

Go on with your great work!

Thanks.

Signature · 3 lines
Robert M. Love
rml at ufl.edu
rml at tech9.net