ASoC: cs35l56: Support for factory calibration through ALSA controls
Subsystems (3)
Richard Fitzgerald
maintainerv2 cover ASoC: cs35l56: Support for factory calibration through ALSA controls
Factory calibration is normally done through debugfs files. Google have requested that factory calibration can be performed by repair shops. These repair shops only have access to the standard "user" kernel, which does not include debugfs.
Patch #1 adds a new control definition macro to create a boolean control
with specified access permissions. (new in V2)
Patch #2 is the implementation in the cs35l56 driver.
Changes in V2:
- Rename "Calibrate" control to "Calibrate Switch" to conform to naming convention for boolean controls.
- Mark "Calibrate Switch" control volatile.
- Cache the value written to the "CAL_AMBIENT" control so that a read will return the last set value.
- Return 1 from writing "CAL_AMBIENT" if the value was changed.
- Return 1 from writing the "Calibrate Switch" control to true because that always causes some activity in the amp.
- Replace use of the confusing in_range() with normal comparisons against limits and make the limits the same as the control definition.
- Simplify the code in cs35l56_calibrate_ctl_set(). It's a boolean so the value written to it is either false or true.
Richard Fitzgerald (2):
ASoC: soc.h: Add SOC_SINGLE_BOOL_EXT_ACC() to allow setting access
flags
ASoC: cs35l56: Allow factory calibration through ALSA controls
include/sound/cs35l56.h | 1 + include/sound/soc.h | 6 ++ sound/soc/codecs/Kconfig | 13 +++++ sound/soc/codecs/cs35l56-shared.c | 9 +++ sound/soc/codecs/cs35l56.c | 96 +++++++++++++++++++++++++++++++ sound/soc/codecs/cs35l56.h | 2 + 6 files changed, 127 insertions(+)
Signature · 1 line
2.47.3
Richard Fitzgerald
maintainerPATCH v2 1/2 ASoC: soc.h: Add SOC_SINGLE_BOOL_EXT_ACC() to allow setting access flags
Add a macro SOC_SINGLE_BOOL_EXT_ACC() to allow the access permission flags to be set. This is the same as SOC_SINGLE_BOOL_EXT() but with an extra argument for the access flags.
---
New in V2
include/sound/soc.h | 6 ++++++ 1 file changed, 6 insertions(+)
include/sound/soc.h +6 -0
@@ -311,6 +311,12 @@ struct platform_device; .info = snd_soc_info_bool_ext, \ .get = xhandler_get, .put = xhandler_put, \ .private_value = xdata } +#define SOC_SINGLE_BOOL_EXT_ACC (xname, xdata, xhandler_get, xhandler_put, xaccess) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ + .access = xaccess, \ + .info = snd_soc_info_bool_ext, \ + .get = xhandler_get, .put = xhandler_put, \ + .private_value = xdata }#define SOC_ENUM_EXT (xname, xenum, xhandler_get, xhandler_put) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ .info = snd_soc_info_enum_double, \
Signature · 1 line
2.47.3
Richard Fitzgerald
maintainerPATCH v2 2/2 ASoC: cs35l56: Allow factory calibration through ALSA controls
In reply to Richard FitzgeraldAdd support for using ALSA controls to trigger a factory calibration. This is protected by a new Kconfig option so that it is only available if explicitly enabled in the kernel. By default it is not enabled.
Factory calibration is normally done through debugfs files. Google have requested that factory calibration can be performed by repair shops. These repair shops only have access to the standard "user" kernel, which does not include debugfs.
---
Changes in V2:
- Rename "Calibrate" control to "Calibrate Switch" to conform to naming convention for boolean controls.
- Mark "Calibrate Switch" control volatile.
- Cache the value written to the "CAL_AMBIENT" control so that a read will return the last set value.
- Return 1 from writing "CAL_AMBIENT" if the value was changed.
- Return 1 from writing the "Calibrate Switch" control to true because that always causes some activity in the amp.
- Replace use of the confusing in_range() with normal comparisons against limits and make the limits the same as the control definition.
- Simplify the code in cs35l56_calibrate_ctl_set(). It's a boolean so the value written to it is either false or true.
include/sound/cs35l56.h | 1 + sound/soc/codecs/Kconfig | 13 +++++ sound/soc/codecs/cs35l56-shared.c | 9 +++ sound/soc/codecs/cs35l56.c | 96 +++++++++++++++++++++++++++++++ sound/soc/codecs/cs35l56.h | 2 + 5 files changed, 121 insertions(+)
include/sound/cs35l56.h +1 -0
@@ -435,6 +435,7 @@ ssize_t cs35l56_cal_data_debugfs_read(struct cs35l56_base *cs35l56_base,ssize_t cs35l56_cal_data_debugfs_write (struct cs35l56_base *cs35l56_base,const char __user *from,size_t count,loff_t *ppos); +int cs35l56_factory_calibrate (struct cs35l56_base *cs35l56_base);void cs35l56_create_cal_debugfs (struct cs35l56_base *cs35l56_base,const struct cs35l56_cal_debugfs_fops *fops);void cs35l56_remove_cal_debugfs (struct cs35l56_base *cs35l56_base);
sound/soc/codecs/Kconfig +13 -0
@@ -921,6 +921,19 @@ config SND_SOC_CS35L56_CAL_SET_CTRL If unsure select "N". +config SND_SOC_CS35L56_CAL_PERFORM_CTRL + bool "CS35L56 ALSA control to perform factory calibration" + default N + select SND_SOC_CS35L56_CAL_DEBUGFS_COMMON + help + Allow performing factory calibration data through an ALSA + control. It is recommended to use the debugfs method instead + because debugfs has restricted access permissions. + + On most platforms this is not needed. + + If unsure select "N". + config SND_SOC_CS35L56_TEST tristate "KUnit test for Cirrus Logic cs35l56 driver" if !KUNIT_ALL_TESTS depends on SND_SOC_CS35L56 && KUNIT
sound/soc/codecs/cs35l56-shared.c +9 -0
@@ -1185,6 +1185,15 @@ ssize_t cs35l56_calibrate_debugfs_write(struct cs35l56_base *cs35l56_base, }EXPORT_SYMBOL_NS_GPL (cs35l56_calibrate_debugfs_write,"SND_SOC_CS35L56_SHARED" ); +int cs35l56_factory_calibrate (struct cs35l56_base *cs35l56_base) +{ +if (!IS_ENABLED (CONFIG_SND_SOC_CS35L56_CAL_PERFORM_CTRL )) +return -ENXIO ; + +return cs35l56_perform_calibration (cs35l56_base); +} +EXPORT_SYMBOL_NS_GPL (cs35l56_factory_calibrate,"SND_SOC_CS35L56_SHARED" ); +ssize_t cs35l56_cal_ambient_debugfs_write (struct cs35l56_base *cs35l56_base,const char __user *from,size_t count,loff_t *ppos)
sound/soc/codecs/cs35l56.c +96 -0
114 lines not on this page · raw message
sound/soc/codecs/cs35l56.h +2 -0
@@ -54,6 +54,8 @@ struct cs35l56_private {bool sysclk_set;u8 sdw_link_num;u8 sdw_unique_id; + +u8 ambient_ctl_value; };static inline struct cs35l56_private *cs35l56_private_from_base (struct cs35l56_base *cs35l56_base)
Signature · 1 line
2.47.3
Mark Brown
maintainerRe: [PATCH v2 2/2] ASoC: cs35l56: Allow factory calibration through ALSA controls
Quoted 8 lines · Richard Fitzgerald
Add support for using ALSA controls to trigger a factory calibration. This is protected by a new
Kconfigoption so that it is only available if explicitly enabled in the kernel. By default it is not enabled.Factory calibration is normally done through debugfs files. Google have requested that factory calibration can be performed by repair shops. These repair shops only have access to the standard "user" kernel, which does not include debugfs.
AFAICT this doesn't have an EFI write command like the debugfs code does (when you write "store_uefi"). I don't mind, just wanted to double check that this is desirable?
Quoted 217 lines
Signed-off-by Richard Fitzgerald <[email protected]>---
Changes in V2:
- Rename "Calibrate" control to "Calibrate Switch" to conform to naming convention for boolean controls.
- Mark "Calibrate Switch" control volatile.
- Cache the value written to the "CAL_AMBIENT" control so that a read will return the last set value.
- Return 1 from writing "CAL_AMBIENT" if the value was changed.
- Return 1 from writing the "Calibrate Switch" control to true because that always causes some activity in the amp.
- Replace use of the confusingin_range()with normal comparisons against limits and make the limits the same as the control definition.
- Simplify the code incs35l56_calibrate_ctl_set(). It's a boolean so the value written to it is either false or true.include/sound/cs35l56.h | 1 + sound/soc/codecs/Kconfig | 13 +++++ sound/soc/codecs/cs35l56-shared.c | 9 +++ sound/soc/codecs/cs35l56.c | 96 +++++++++++++++++++++++++++++++ sound/soc/codecs/cs35l56.h | 2 + 5 files changed, 121 insertions(+)include/sound/cs35l56.h +1
-0@@ -435,6 +435,7 @@ ssize_t cs35l56_cal_data_debugfs_read(struct cs35l56_base *cs35l56_base,ssize_t cs35l56_cal_data_debugfs_write (struct cs35l56_base *cs35l56_base,const char __user *from,size_t count,loff_t *ppos); +int cs35l56_factory_calibrate (struct cs35l56_base *cs35l56_base);void cs35l56_create_cal_debugfs (struct cs35l56_base *cs35l56_base,const struct cs35l56_cal_debugfs_fops *fops);void cs35l56_remove_cal_debugfs (struct cs35l56_base *cs35l56_base);sound/soc/codecs/Kconfig +13
-0@@ -921,6 +921,19 @@ config SND_SOC_CS35L56_CAL_SET_CTRL If unsure select "N". +config SND_SOC_CS35L56_CAL_PERFORM_CTRL + bool "CS35L56 ALSA control to perform factory calibration" + default N + select SND_SOC_CS35L56_CAL_DEBUGFS_COMMON + help + Allow performing factory calibration data through an ALSA + control. It is recommended to use the debugfs method instead + because debugfs has restricted access permissions. + + On most platforms this is not needed. + + If unsure select "N". + config SND_SOC_CS35L56_TEST tristate "KUnit test for Cirrus Logic cs35l56 driver" if !KUNIT_ALL_TESTS depends on SND_SOC_CS35L56 && KUNITsound/soc/codecs/cs35l56-shared.c +9
-0@@ -1185,6 +1185,15 @@ ssize_t cs35l56_calibrate_debugfs_write(struct cs35l56_base *cs35l56_base, }EXPORT_SYMBOL_NS_GPL (cs35l56_calibrate_debugfs_write,"SND_SOC_CS35L56_SHARED" ); +int cs35l56_factory_calibrate (struct cs35l56_base *cs35l56_base) +{ +if (!IS_ENABLED (CONFIG_SND_SOC_CS35L56_CAL_PERFORM_CTRL )) +return -ENXIO ; + +return cs35l56_perform_calibration (cs35l56_base); +} +EXPORT_SYMBOL_NS_GPL (cs35l56_factory_calibrate,"SND_SOC_CS35L56_SHARED" ); +ssize_t cs35l56_cal_ambient_debugfs_write (struct cs35l56_base *cs35l56_base,const char __user *from,size_t count,loff_t *ppos)sound/soc/codecs/cs35l56.c +96
-0@@ -1109,6 +1109,88 @@ static int cs35l56_cal_data_ctl_set(struct snd_kcontrol *kcontrol,return 1 ; } +static int cs35l56_cal_ambient_ctl_get (struct snd_kcontrol *kcontrol, +struct snd_ctl_elem_value *ucontrol) +{ +struct snd_soc_component *component =snd_kcontrol_chip (kcontrol); +struct cs35l56_private *cs35l56 =snd_soc_component_get_drvdata (component); + + ucontrol->value.integer.value[0 ] = cs35l56->ambient_ctl_value; + +return 0 ; +} + +static int cs35l56_cal_ambient_ctl_set (struct snd_kcontrol *kcontrol, +struct snd_ctl_elem_value *ucontrol) +{ +struct snd_soc_component *component =snd_kcontrol_chip (kcontrol); +struct cs35l56_private *cs35l56 =snd_soc_component_get_drvdata (component); +struct snd_soc_dapm_context *dapm; +int temperature = ucontrol->value.integer.value[0 ]; +int ret; + +if (temperature == cs35l56->ambient_ctl_value) +return 0 ; + +if ((temperature <0 ) || (temperature >40 )) +return -EINVAL ; + + dapm =cs35l56_power_up_for_cal (cs35l56); +if (IS_ERR (dapm)) +return PTR_ERR (dapm); + + ret =cs_amp_write_ambient_temp (&cs35l56->dsp.cs_dsp, + cs35l56->base.calibration_controls, + temperature); +cs35l56_power_down_after_cal (cs35l56); + +if (ret) +return ret; + + cs35l56->ambient_ctl_value = temperature; + +return 1 ; +} + +static int cs35l56_calibrate_ctl_get (struct snd_kcontrol *kcontrol, +struct snd_ctl_elem_value *ucontrol) +{ +/* +* Allow reading because of user-side libraries that assume all +* controls are readable. But always return false to prevent dumb +* save-restore tools like alsactl accidentically triggering a +* factory calibration when they restore. +*/ + ucontrol->value.integer.value[0 ] =0 ; + +return 0 ; +} + +static int cs35l56_calibrate_ctl_set (struct snd_kcontrol *kcontrol, +struct snd_ctl_elem_value *ucontrol) +{ +struct snd_soc_component *component =snd_kcontrol_chip (kcontrol); +struct cs35l56_private *cs35l56 =snd_soc_component_get_drvdata (component); +struct snd_soc_dapm_context *dapm; +int ret; + +if (ucontrol->value.integer.value[0 ] ==0 ) +return 0 ; + + dapm =cs35l56_power_up_for_cal (cs35l56); +if (IS_ERR (dapm)) +return PTR_ERR (dapm); + +snd_soc_dapm_mutex_lock (dapm); + ret =cs35l56_factory_calibrate (&cs35l56->base); +snd_soc_dapm_mutex_unlock (dapm); +cs35l56_power_down_after_cal (cs35l56); +if (ret <0 ) +return ret; + +return 1 ; +} +static const struct snd_kcontrol_new cs35l56_cal_data_restore_controls[] = {SND_SOC_BYTES_E ("CAL_DATA" ,0 ,sizeof (struct cirrus_amp_cal_data ) /sizeof (u32), cs35l56_cal_data_ctl_get, cs35l56_cal_data_ctl_set),@@ -1117,6 +1199,14 @@ static const struct snd_kcontrol_new cs35l56_cal_data_restore_controls[] = { SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE), }; +static const struct snd_kcontrol_new cs35l56_cal_perform_controls[] = { +SOC_SINGLE_EXT ("CAL_AMBIENT" ,SND_SOC_NOPM ,0 ,40 ,0 , + cs35l56_cal_ambient_ctl_get, cs35l56_cal_ambient_ctl_set), +SOC_SINGLE_BOOL_EXT_ACC ("Calibrate Switch" ,0 , + cs35l56_calibrate_ctl_get, cs35l56_calibrate_ctl_set, +SNDRV_CTL_ELEM_ACCESS_READWRITE |SNDRV_CTL_ELEM_ACCESS_VOLATILE ), +}; + VISIBLE_IF_KUNIT int cs35l56_set_fw_suffix(struct cs35l56_private *cs35l56) {unsigned short vendor, device;@@ -1290,6 +1380,12 @@ static int cs35l56_component_probe(struct snd_soc_component *component) ARRAY_SIZE(cs35l56_cal_data_restore_controls)); } +if (!ret &&IS_ENABLED (CONFIG_SND_SOC_CS35L56_CAL_PERFORM_CTRL )) { + ret =snd_soc_add_component_controls (component, + cs35l56_cal_perform_controls, +ARRAY_SIZE (cs35l56_cal_perform_controls)); + } +if (ret)return dev_err_probe (cs35l56->base.dev, ret,"unable to add controls\n" );sound/soc/codecs/cs35l56.h +2
-0@@ -54,6 +54,8 @@ struct cs35l56_private {bool sysclk_set;u8 sdw_link_num;u8 sdw_unique_id; + +u8 ambient_ctl_value; };static inline struct cs35l56_private *cs35l56_private_from_base (struct cs35l56_base *cs35l56_base)Signature · 1 line
2.47.3
Richard Fitzgerald
maintainerRe: [PATCH v2 2/2] ASoC: cs35l56: Allow factory calibration through ALSA controls
Quoted 5 lines · Mark Brown
Quoted 3 lines · Richard Fitzgerald
Add support for using ALSA controls to trigger a factory calibration. This is protected by a new
Kconfigoption so that it is only available if explicitly enabled in the kernel. By default it is not enabled.
Quoted 9 lines
Quoted 4 lines
Factory calibration is normally done through debugfs files. Google have requested that factory calibration can be performed by repair shops. These repair shops only have access to the standard "user" kernel, which does not include debugfs.
AFAICT this doesn't have an EFI write command like the debugfs code does (when you write "
store_uefi"). I don't mind, just wanted to double check that this is desirable?
That's correct. The Google devices don't have EFI storage, they will use the CAL_DATA_RB control to extract the calibration data to save it in their own persistent storage.
Mark Brown
maintainerQuoted 8 lines · Richard Fitzgerald
ASoC: cs35l56: Support for factory calibration through ALSA controls
Factory calibration is normally done through debugfs files. Google have requested that factory calibration can be performed by repair shops. These repair shops only have access to the standard "user" kernel, which does not include debugfs.
[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-7.1
Thanks!
[1/2] ASoC: soc.h: Add SOC_SINGLE_BOOL_EXT_ACC() to allow setting access flags
https://git.kernel.org/broonie/sound/c/37c277f050e8 [2/2] ASoC: cs35l56: Allow factory calibration through ALSA controls https://git.kernel.org/broonie/sound/c/ee7d655dbaf5
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark