Skip to contentSkip to conversation

pause device removal

DISCUSSION Stephan Mueller 2 participants 2 messages Jul 17 – Jul 18 Btrfs file system

lore
Share & tools
lore
#0 lore raw

Hello

we have 140T btrfs made from 10 LUNs. This file system is quite full with backups (and snapshots). Now we need to free one of the LUNs. A btrfs device remove is quite slow and also slows down nightly backups a lot.

So we run the device remove during the day and the backups during the night. On another btrfs this worked quite well. But here, the backups fill the device we want to remove and currently we are not moving anywhere regarding the usage the LUN.

Do you have an idea how can resolve this?
Can we somehow mark the device as unusable for new writes, or set it size, so that it is not written to? Do you think it's safe to cgroup freeze the removal during the night?

Have a nice day
Stephan

Total devices 10 FS bytes used 144.08TiB

devid    1 size 0.00B used 6.81TiB path /dev/sdgb     <--- currently in removal
devid    3 size 1.88TiB used 546.00GiB path /dev/sdv
devid    5 size 20.00TiB used 17.16TiB path /dev/sdw
devid    6 size 20.00TiB used 17.16TiB path /dev/sdo
devid    7 size 20.00TiB used 17.16TiB path /dev/sdu
devid    8 size 20.00TiB used 17.16TiB path /dev/sdn
devid    9 size 20.00TiB used 17.16TiB path /dev/sdj
devid   10 size 20.00TiB used 17.16TiB path /dev/sdk
devid   11 size 20.00TiB used 17.16TiB path /dev/sdm
devid   12 size 20.00TiB used 17.16TiB path /dev/sdbc
Signature · 4 lines
Stephan Müller <[email protected]>
IT Services Group, HPT H 8
Physics Department, ETH Zurich
CH-8093 Zurich, Switzerland
#1 lore raw

Stephan Mueller kirjoitti 17.7.2026 klo 12.15:

Quoted 3 lines

we have 140T btrfs made from 10 LUNs. This file system is quite full with backups (and snapshots). Now we need to free one of the LUNs. A btrfs device remove is quite slow and also slows down nightly backups a lot.

So we run the device remove during the day and the backups during the night. On another btrfs this worked quite well. But here, the backups fill the device we want to remove and currently we are not moving anywhere regarding the usage the LUN.

You can use btrfs device resize to incrementally decrease the device size, then finally remove it with normal delete.

Like so: btrfs fi resize 1:-100G path-to-device

This will resize devid 1 100 gigabytes smaller. It will be a somewhat slower process than just device delete, but not hugely so (in my experience anyway).

Signature · 2 lines
     ...Elämälle vierasta toimintaa...
    Jukka Larja, [email protected]