Skip to contentSkip to conversation

Supporting AST2600 HACE engine accumulative mode

PATCH In review Troy Lee 4 participants 9 messages Jan 12, 2022 – Feb 10, 2022 Arm/Aspeed machine support

lore
Share & tools
lore

Troy Lee

author
#0 lore raw

v2 cover Supporting AST2600 HACE engine accumulative mode

This patch series implements ast2600 hace engine with accumulative mode and unit test against to it.

Changes in v2:
- Coding style
- Add accumulative mode description in comment
- Add unit test cases

Troy Lee (2):
hw/misc: Supporting AST2600 HACE accumulative mode tests/qtest: Add test for Aspeed HACE accumulative mode

 hw/misc/aspeed_hace.c          |  43 ++++++++--
 include/hw/misc/aspeed_hace.h  |   1 +
 tests/qtest/aspeed_hace-test.c | 145 +++++++++++++++++++++++++++++++++
 3 files changed, 181 insertions(+), 8 deletions(-)
Signature · 1 line
2.25.1
author
#1 lore raw

PATCH v2 1/2 hw/misc: Supporting AST2600 HACE accumulative mode

Accumulative mode will supply a initial state and append padding bit at the end of hash stream. However, the crypto library will padding those bit automatically, so ripped it off from iov array.

The aspeed ast2600 acculumative mode is described in datasheet ast2600v10.pdf section 25.6.4:
1. Allocationg and initiating accumulative hash digest write buffer with initial state.
* Since QEMU crypto/hash api doesn't provide the API to set initial state of hash library, and the initial state is already setted by crypto library (gcrypt/glib/...), so skip this step.
2. Calculating accumulative hash digest.
(a) When receiving the last accumulative data, software need to add padding message at the end of the accumulative data. Padding message described in specific of MD5, SHA-1, SHA224, SHA256, SHA512, SHA512/224, SHA512/256.
* Since the crypto library (gcrypt/glib) already pad the padding message internally.
* This patch is to remove the padding message which fed byguest machine driver.

Changes in v2:
- Coding style
- Add accumulative mode description in comment

---
 hw/misc/aspeed_hace.c         | 43 ++++++++++++++++++++++++++++-------
 include/hw/misc/aspeed_hace.h |  1 +
 2 files changed, 36 insertions(+), 8 deletions(-)
hw/misc/aspeed_hace.c +35 -8
index 10f00e65f4..0710f44621 100644
@@ -11,6 +11,7 @@
 #include "qemu/osdep.h"
 #include "qemu/log.h"
 #include "qemu/error-report.h"
+#include "qemu/bswap.h"
 #include "hw/misc/aspeed_hace.h"
 #include "qapi/error.h"
 #include "migration/vmstate.h"
@@ -27,6 +28,7 @@
 
 #define R_HASH_SRC      (0x20 / 4)
 #define R_HASH_DEST     (0x24 / 4)
+#define R_HASH_KEY_BUFF (0x28 / 4)
 #define R_HASH_SRC_LEN  (0x2c / 4)
 
 #define R_HASH_CMD      (0x30 / 4)
@@ -94,7 +96,8 @@ static int hash_algo_lookup(uint32_t reg)
     return -1;
 }
 
-static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode)
+static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode,
+                              bool acc_mode)
 {
     struct iovec iov[ASPEED_HACE_MAX_SG];
     g_autofree uint8_t *digest_buf;
@@ -103,6 +106,7 @@ static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode)
 
     if (sg_mode) {
         uint32_t len = 0;
+        uint32_t total_len = 0;
 
         for (i = 0; !(len & SG_LIST_LEN_LAST); i++) {
             uint32_t addr, src;
@@ -123,10 +127,26 @@ static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode)
                                         MEMTXATTRS_UNSPECIFIED, NULL);
             addr &= SG_LIST_ADDR_MASK;
 
-            iov[i].iov_len = len & SG_LIST_LEN_MASK;
-            plen = iov[i].iov_len;
+            plen = len & SG_LIST_LEN_MASK;
             iov[i].iov_base = address_space_map(&s->dram_as, addr, &plen, false,
                                                 MEMTXATTRS_UNSPECIFIED);
+
+            if (acc_mode) {
+                total_len += plen;
+
+                if (len & SG_LIST_LEN_LAST) {
+                    /*
+                     * In the padding message, the last 64/128 bit represents
+                     * the total length of bitstream in big endian.
+                     * SHA-224, SHA-256 are 64 bit
+                     * SHA-384, SHA-512, SHA-512/224, SHA-512/256 are 128 bit
+                     * However, we would not process such a huge bit stream.
+                     */
+                    plen -= total_len - (ldq_be_p(iov[i].iov_base + plen - 8) / 8);
+                }
+            }
+
+            iov[i].iov_len = plen;
         }
     } else {
         hwaddr len = s->regs[R_HASH_SRC_LEN];
@@ -210,6 +230,9 @@ static void aspeed_hace_write(void *opaque, hwaddr addr, uint64_t data,
     case R_HASH_DEST:
         data &= ahc->dest_mask;
         break;
+    case R_HASH_KEY_BUFF:
+        data &= ahc->key_mask;
+        break;
     case R_HASH_SRC_LEN:
         data &= 0x0FFFFFFF;
         break;
@@ -229,12 +252,13 @@ static void aspeed_hace_write(void *opaque, hwaddr addr, uint64_t data,
         }
         algo = hash_algo_lookup(data);
         if (algo < 0) {
-                qemu_log_mask(LOG_GUEST_ERROR,
-                        "%s: Invalid hash algorithm selection 0x%"PRIx64"\n",
-                        __func__, data & ahc->hash_mask);
-                break;
+            qemu_log_mask(LOG_GUEST_ERROR,
+                    "%s: Invalid hash algorithm selection 0x%"PRIx64"\n",
+                    __func__, data & ahc->hash_mask);
+            break;
         }
-        do_hash_operation(s, algo, data & HASH_SG_EN);
+        do_hash_operation(s, algo, data & HASH_SG_EN,
+                ((data & HASH_HMAC_MASK) == HASH_DIGEST_ACCUM));
 
         if (data & HASH_IRQ_EN) {
             qemu_irq_raise(s->irq);
@@ -333,6 +357,7 @@ static void aspeed_ast2400_hace_class_init(ObjectClass *klass, void *data)
 
     ahc->src_mask = 0x0FFFFFFF;
     ahc->dest_mask = 0x0FFFFFF8;
+    ahc->key_mask = 0x0FFFFFC0;
     ahc->hash_mask = 0x000003ff; /* No SG or SHA512 modes */
 }
 
@@ -351,6 +376,7 @@ static void aspeed_ast2500_hace_class_init(ObjectClass *klass, void *data)
 
     ahc->src_mask = 0x3fffffff;
     ahc->dest_mask = 0x3ffffff8;
+    ahc->key_mask = 0x3FFFFFC0;
     ahc->hash_mask = 0x000003ff; /* No SG or SHA512 modes */
 }
 
@@ -369,6 +395,7 @@ static void aspeed_ast2600_hace_class_init(ObjectClass *klass, void *data)
 
     ahc->src_mask = 0x7FFFFFFF;
     ahc->dest_mask = 0x7FFFFFF8;
+    ahc->key_mask = 0x7FFFFFF8;
     ahc->hash_mask = 0x00147FFF;
 }
 
include/hw/misc/aspeed_hace.h +1 -0
index 94d5ada95f..2242945eb4 100644
@@ -37,6 +37,7 @@ struct AspeedHACEClass {
 
     uint32_t src_mask;
     uint32_t dest_mask;
+    uint32_t key_mask;
     uint32_t hash_mask;
 };
 
Signature · 1 line
2.25.1
#2 lore raw

Re: [PATCH v2 1/2] hw/misc: Supporting AST2600 HACE accumulative mode

[ Adding Klaus ]

Sorry I forgot to add Klaus to the CC list.

Quoted 167 lines · Troy Lee

Accumulative mode will supply a initial state and append padding bit at the end of hash stream. However, the crypto library will padding those bit automatically, so ripped it off from iov array.

The aspeed ast2600 acculumative mode is described in datasheet ast2600v10.pdf section 25.6.4:
1. Allocationg and initiating accumulative hash digest write buffer with initial state.
* Since QEMU crypto/hash api doesn't provide the API to set initial state of hash library, and the initial state is already setted by crypto library (gcrypt/glib/...), so skip this step.
2. Calculating accumulative hash digest.
(a) When receiving the last accumulative data, software need to add padding message at the end of the accumulative data. Padding message described in specific of MD5, SHA-1, SHA224, SHA256, SHA512, SHA512/224, SHA512/256.
* Since the crypto library (gcrypt/glib) already pad the padding message internally.
* This patch is to remove the padding message which fed byguest machine driver.

Changes in v2:
- Coding style
- Add accumulative mode description in comment

---
 hw/misc/aspeed_hace.c         | 43 ++++++++++++++++++++++++++++-------
 include/hw/misc/aspeed_hace.h |  1 +
 2 files changed, 36 insertions(+), 8 deletions(-)
hw/misc/aspeed_hace.c +35 -8
index 10f00e65f4..0710f44621 100644
@@ -11,6 +11,7 @@
 #include "qemu/osdep.h"
 #include "qemu/log.h"
 #include "qemu/error-report.h"
+#include "qemu/bswap.h"
 #include "hw/misc/aspeed_hace.h"
 #include "qapi/error.h"
 #include "migration/vmstate.h"
@@ -27,6 +28,7 @@
 
 #define R_HASH_SRC      (0x20 / 4)
 #define R_HASH_DEST     (0x24 / 4)
+#define R_HASH_KEY_BUFF (0x28 / 4)
 #define R_HASH_SRC_LEN  (0x2c / 4)
 
 #define R_HASH_CMD      (0x30 / 4)
@@ -94,7 +96,8 @@ static int hash_algo_lookup(uint32_t reg)
     return -1;
 }
 
-static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode)
+static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode,
+                              bool acc_mode)
 {
     struct iovec iov[ASPEED_HACE_MAX_SG];
     g_autofree uint8_t *digest_buf;
@@ -103,6 +106,7 @@ static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode)
 
     if (sg_mode) {
         uint32_t len = 0;
+        uint32_t total_len = 0;
 
         for (i = 0; !(len & SG_LIST_LEN_LAST); i++) {
             uint32_t addr, src;
@@ -123,10 +127,26 @@ static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode)
                                         MEMTXATTRS_UNSPECIFIED, NULL);
             addr &= SG_LIST_ADDR_MASK;
 
-            iov[i].iov_len = len & SG_LIST_LEN_MASK;
-            plen = iov[i].iov_len;
+            plen = len & SG_LIST_LEN_MASK;
             iov[i].iov_base = address_space_map(&s->dram_as, addr, &plen, false,
                                                 MEMTXATTRS_UNSPECIFIED);
+
+            if (acc_mode) {
+                total_len += plen;
+
+                if (len & SG_LIST_LEN_LAST) {
+                    /*
+                     * In the padding message, the last 64/128 bit represents
+                     * the total length of bitstream in big endian.
+                     * SHA-224, SHA-256 are 64 bit
+                     * SHA-384, SHA-512, SHA-512/224, SHA-512/256 are 128 bit
+                     * However, we would not process such a huge bit stream.
+                     */
+                    plen -= total_len - (ldq_be_p(iov[i].iov_base + plen - 8) / 8);
+                }
+            }
+
+            iov[i].iov_len = plen;
         }
     } else {
         hwaddr len = s->regs[R_HASH_SRC_LEN];
@@ -210,6 +230,9 @@ static void aspeed_hace_write(void *opaque, hwaddr addr, uint64_t data,
     case R_HASH_DEST:
         data &= ahc->dest_mask;
         break;
+    case R_HASH_KEY_BUFF:
+        data &= ahc->key_mask;
+        break;
     case R_HASH_SRC_LEN:
         data &= 0x0FFFFFFF;
         break;
@@ -229,12 +252,13 @@ static void aspeed_hace_write(void *opaque, hwaddr addr, uint64_t data,
         }
         algo = hash_algo_lookup(data);
         if (algo < 0) {
-                qemu_log_mask(LOG_GUEST_ERROR,
-                        "%s: Invalid hash algorithm selection 0x%"PRIx64"\n",
-                        __func__, data & ahc->hash_mask);
-                break;
+            qemu_log_mask(LOG_GUEST_ERROR,
+                    "%s: Invalid hash algorithm selection 0x%"PRIx64"\n",
+                    __func__, data & ahc->hash_mask);
+            break;
         }
-        do_hash_operation(s, algo, data & HASH_SG_EN);
+        do_hash_operation(s, algo, data & HASH_SG_EN,
+                ((data & HASH_HMAC_MASK) == HASH_DIGEST_ACCUM));
 
         if (data & HASH_IRQ_EN) {
             qemu_irq_raise(s->irq);
@@ -333,6 +357,7 @@ static void aspeed_ast2400_hace_class_init(ObjectClass *klass, void *data)
 
     ahc->src_mask = 0x0FFFFFFF;
     ahc->dest_mask = 0x0FFFFFF8;
+    ahc->key_mask = 0x0FFFFFC0;
     ahc->hash_mask = 0x000003ff; /* No SG or SHA512 modes */
 }
 
@@ -351,6 +376,7 @@ static void aspeed_ast2500_hace_class_init(ObjectClass *klass, void *data)
 
     ahc->src_mask = 0x3fffffff;
     ahc->dest_mask = 0x3ffffff8;
+    ahc->key_mask = 0x3FFFFFC0;
     ahc->hash_mask = 0x000003ff; /* No SG or SHA512 modes */
 }
 
@@ -369,6 +395,7 @@ static void aspeed_ast2600_hace_class_init(ObjectClass *klass, void *data)
 
     ahc->src_mask = 0x7FFFFFFF;
     ahc->dest_mask = 0x7FFFFFF8;
+    ahc->key_mask = 0x7FFFFFF8;
     ahc->hash_mask = 0x00147FFF;
 }
 
include/hw/misc/aspeed_hace.h +1 -1
index 94d5ada95f..2242945eb4 100644
@@ -37,6 +37,7 @@ struct AspeedHACEClass {
 
     uint32_t src_mask;
     uint32_t dest_mask;
+    uint32_t key_mask;
     uint32_t hash_mask;
 };
 
--

2.25.1

#3 lore raw

Re: [PATCH v2 1/2] hw/misc: Supporting AST2600 HACE accumulative mode

In reply to Troy Lee

Hello Troy,

Quoted 79 lines · Troy Lee

Accumulative mode will supply a initial state and append padding bit at the end of hash stream. However, the crypto library will padding those bit automatically, so ripped it off from iov array.

The aspeed ast2600 acculumative mode is described in datasheet ast2600v10.pdf section 25.6.4:
1. Allocationg and initiating accumulative hash digest write buffer with initial state.
* Since QEMU crypto/hash api doesn't provide the API to set initial state of hash library, and the initial state is already setted by crypto library (gcrypt/glib/...), so skip this step.
2. Calculating accumulative hash digest.
(a) When receiving the last accumulative data, software need to add padding message at the end of the accumulative data. Padding message described in specific of MD5, SHA-1, SHA224, SHA256, SHA512, SHA512/224, SHA512/256.
* Since the crypto library (gcrypt/glib) already pad the padding message internally.
* This patch is to remove the padding message which fed byguest machine driver.

Changes in v2:
- Coding style
- Add accumulative mode description in comment

---
  hw/misc/aspeed_hace.c         | 43 ++++++++++++++++++++++++++++-------
  include/hw/misc/aspeed_hace.h |  1 +
  2 files changed, 36 insertions(+), 8 deletions(-)
hw/misc/aspeed_hace.c +7 -3
index 10f00e65f4..0710f44621 100644
@@ -11,6 +11,7 @@
  #include "qemu/osdep.h"
  #include "qemu/log.h"
  #include "qemu/error-report.h"
+#include "qemu/bswap.h"
  #include "hw/misc/aspeed_hace.h"
  #include "qapi/error.h"
  #include "migration/vmstate.h"
@@ -27,6 +28,7 @@
 
  #define R_HASH_SRC      (0x20 / 4)
  #define R_HASH_DEST     (0x24 / 4)
+#define R_HASH_KEY_BUFF (0x28 / 4)
  #define R_HASH_SRC_LEN  (0x2c / 4)
 
  #define R_HASH_CMD      (0x30 / 4)
@@ -94,7 +96,8 @@ static int hash_algo_lookup(uint32_t reg)
      return -1;
  }
 
-static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode)
+static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode,
+                              bool acc_mode)
  {
      struct iovec iov[ASPEED_HACE_MAX_SG];
      g_autofree uint8_t *digest_buf;
@@ -103,6 +106,7 @@ static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode)
 
      if (sg_mode) {
          uint32_t len = 0;
+        uint32_t total_len = 0;
 
          for (i = 0; !(len & SG_LIST_LEN_LAST); i++) {
              uint32_t addr, src;
@@ -123,10 +127,26 @@ static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode)
                                          MEMTXATTRS_UNSPECIFIED, NULL);
              addr &= SG_LIST_ADDR_MASK;
 
-            iov[i].iov_len = len & SG_LIST_LEN_MASK;
-            plen = iov[i].iov_len;
+            plen = len & SG_LIST_LEN_MASK;
              iov[i].iov_base = address_space_map(&s->dram_as, addr, &plen, false,
                                                  MEMTXATTRS_UNSPECIFIED);
+

hw/misc/aspeed_hace.c static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode) · line 143

Quoted 10 lines
hw/misc/aspeed_hace.c +10 -0
+            if (acc_mode) {
+                total_len += plen;
+
+                if (len & SG_LIST_LEN_LAST) {
+                    /*
+                     * In the padding message, the last 64/128 bit represents
+                     * the total length of bitstream in big endian.
+                     * SHA-224, SHA-256 are 64 bit
+                     * SHA-384, SHA-512, SHA-512/224, SHA-512/256 are 128 bit
+                     * However, we would not process such a huge bit stream.

If we do not support accumulative mode with SHA-384, SHA-512, SHA-512/224, SHA-512/256 algos, we should make sure that do_hash_operation() is not called and emit a warning.

Thanks,

C.

Quoted 75 lines
hw/misc/aspeed_hace.c +18 -5
+                     */
+                    plen -= total_len - (ldq_be_p(iov[i].iov_base + plen - 8) / 8);
+                }
+            }
+
+            iov[i].iov_len = plen;
          }
      } else {
          hwaddr len = s->regs[R_HASH_SRC_LEN];
@@ -210,6 +230,9 @@ static void aspeed_hace_write(void *opaque, hwaddr addr, uint64_t data,
      case R_HASH_DEST:
          data &= ahc->dest_mask;
          break;
+    case R_HASH_KEY_BUFF:
+        data &= ahc->key_mask;
+        break;
      case R_HASH_SRC_LEN:
          data &= 0x0FFFFFFF;
          break;
@@ -229,12 +252,13 @@ static void aspeed_hace_write(void *opaque, hwaddr addr, uint64_t data,
          }
          algo = hash_algo_lookup(data);
          if (algo < 0) {
-                qemu_log_mask(LOG_GUEST_ERROR,
-                        "%s: Invalid hash algorithm selection 0x%"PRIx64"\n",
-                        __func__, data & ahc->hash_mask);
-                break;
+            qemu_log_mask(LOG_GUEST_ERROR,
+                    "%s: Invalid hash algorithm selection 0x%"PRIx64"\n",
+                    __func__, data & ahc->hash_mask);
+            break;
          }
-        do_hash_operation(s, algo, data & HASH_SG_EN);
+        do_hash_operation(s, algo, data & HASH_SG_EN,
+                ((data & HASH_HMAC_MASK) == HASH_DIGEST_ACCUM));
 
          if (data & HASH_IRQ_EN) {
              qemu_irq_raise(s->irq);
@@ -333,6 +357,7 @@ static void aspeed_ast2400_hace_class_init(ObjectClass *klass, void *data)
 
      ahc->src_mask = 0x0FFFFFFF;
      ahc->dest_mask = 0x0FFFFFF8;
+    ahc->key_mask = 0x0FFFFFC0;
      ahc->hash_mask = 0x000003ff; /* No SG or SHA512 modes */
  }
 
@@ -351,6 +376,7 @@ static void aspeed_ast2500_hace_class_init(ObjectClass *klass, void *data)
 
      ahc->src_mask = 0x3fffffff;
      ahc->dest_mask = 0x3ffffff8;
+    ahc->key_mask = 0x3FFFFFC0;
      ahc->hash_mask = 0x000003ff; /* No SG or SHA512 modes */
  }
 
@@ -369,6 +395,7 @@ static void aspeed_ast2600_hace_class_init(ObjectClass *klass, void *data)
 
      ahc->src_mask = 0x7FFFFFFF;
      ahc->dest_mask = 0x7FFFFFF8;
+    ahc->key_mask = 0x7FFFFFF8;
      ahc->hash_mask = 0x00147FFF;
  }
 
include/hw/misc/aspeed_hace.h +1 -0
index 94d5ada95f..2242945eb4 100644
@@ -37,6 +37,7 @@ struct AspeedHACEClass {
 
      uint32_t src_mask;
      uint32_t dest_mask;
+    uint32_t key_mask;
      uint32_t hash_mask;
  };
 
#4 lore raw

Re: [PATCH v2 1/2] hw/misc: Supporting AST2600 HACE accumulative mode

Quoted 29 lines
Quoted 29 lines
hw/misc/aspeed_hace.c +2 -1
-static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode)
+static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode,
+                              bool acc_mode)

  {
      struct iovec iov[ASPEED_HACE_MAX_SG];
      g_autofree uint8_t *digest_buf;

hw/misc/aspeed_hace.c +9 -2
@@ -103,6 +106,7 @@ static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode)
       if (sg_mode) {
           uint32_t len = 0;
+        uint32_t total_len = 0;
           for (i = 0; !(len & SG_LIST_LEN_LAST); i++) {
               uint32_t addr, src;
@@ -123,10 +127,26 @@ static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode)
                                           MEMTXATTRS_UNSPECIFIED, NULL);
               addr &= SG_LIST_ADDR_MASK;
-            iov[i].iov_len = len & SG_LIST_LEN_MASK;
-            plen = iov[i].iov_len;
+            plen = len & SG_LIST_LEN_MASK;
               iov[i].iov_base = address_space_map(&s->dram_as, addr, &plen, false,
                                                   MEMTXATTRS_UNSPECIFIED);
+
+            if (acc_mode) {
+                total_len += plen;
+
+                if (len & SG_LIST_LEN_LAST) {
+                    /*
+                     * In the padding message, the last 64/128 bit represents
Quoted 8 lines

hw/misc/aspeed_hace.c static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode) · line 143

Quoted 4 lines
hw/misc/aspeed_hace.c +4 -0
+                     * the total length of bitstream in big endian.
+                     * SHA-224, SHA-256 are 64 bit
+                     * SHA-384, SHA-512, SHA-512/224, SHA-512/256 are 128 bit
+                     * However, we would not process such a huge bit stream.

If we do not support accumulative mode with SHA-384, SHA-512, SHA-512/224, SHA-512/256 algos, we should make sure that do_hash_operation() is not called and emit a warning.

I misunderstood the comment. I don't think it is very complex to extract the total length field correctly. You only need the algo type to pick the right size. May be add one more parameter to do_hash_operation() and

Quoted 2 lines

hw/misc/aspeed_hace.c static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode) · line 145

Quoted 2 lines
hw/misc/aspeed_hace.c +2 -0
+                     */
+                    plen -= total_len - (ldq_be_p(iov[i].iov_base + plen - 8) / 8);

change the offset in the above ?

Thanks,

C.

maintainer
#5 lore raw

Re: [PATCH v2 1/2] hw/misc: Supporting AST2600 HACE accumulative mode

In reply to Troy Lee

Hello Troy,

Quoted 5 lines · Troy Lee

Accumulative mode will supply a initial state and append padding bit at the end of hash stream. However, the crypto library will padding those bit automatically, so ripped it off from iov array.

Quoted 16 lines

The aspeed ast2600 acculumative mode is described in datasheet ast2600v10.pdf section 25.6.4:
1. Allocationg and initiating accumulative hash digest write buffer with initial state.
* Since QEMU crypto/hash api doesn't provide the API to set initial state of hash library, and the initial state is already setted by crypto library (gcrypt/glib/...), so skip this step.
2. Calculating accumulative hash digest.
(a) When receiving the last accumulative data, software need to add padding message at the end of the accumulative data. Padding message described in specific of MD5, SHA-1, SHA224, SHA256, SHA512, SHA512/224, SHA512/256.
* Since the crypto library (gcrypt/glib) already pad the padding message internally.
* This patch is to remove the padding message which fed byguest machine driver.

I tested the latest aspeed SDK u-boot, loaded form mmc (with our mmc model that lives in Cedric's tree) and qemu crashed:

#0 0x00007fe867d44932 in ?? () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0 #1 0x0000557aba2b6e22 in qcrypto_glib_hash_bytesv (alg=<optimized out>, iov=0x7fe8662ee0b0, niov=1, result=0x7fe8662ee0a8, resultlen=0x7fe8662ee0a0, errp=0x0) at ../crypto/hash-glib.c:68
#2 0x0000557ab9f549ea in do_hash_operation (s=s@entry=0x7fe866e1b3b0, algo=5, sg_mode=sg_mode@entry=true, acc_mode=acc_mode@entry=true) at ../hw/misc/aspeed_hace.c:161
#3 0x0000557ab9f54dd1 in aspeed_hace_write (opaque=<optimized out>, addr=12, data=262504, size=<optimized out>) at ../hw/misc/aspeed_hace.c:260

WIthout your patch applied the HACE operation fails, as we do not have support for accumulative mode, but we do not crash.

Quoted 146 lines

Changes in v2:
- Coding style
- Add accumulative mode description in comment

---
 hw/misc/aspeed_hace.c         | 43 ++++++++++++++++++++++++++++-------
 include/hw/misc/aspeed_hace.h |  1 +
 2 files changed, 36 insertions(+), 8 deletions(-)
hw/misc/aspeed_hace.c +35 -8
index 10f00e65f4..0710f44621 100644
@@ -11,6 +11,7 @@
 #include "qemu/osdep.h"
 #include "qemu/log.h"
 #include "qemu/error-report.h"
+#include "qemu/bswap.h"
 #include "hw/misc/aspeed_hace.h"
 #include "qapi/error.h"
 #include "migration/vmstate.h"
@@ -27,6 +28,7 @@
 
 #define R_HASH_SRC      (0x20 / 4)
 #define R_HASH_DEST     (0x24 / 4)
+#define R_HASH_KEY_BUFF (0x28 / 4)
 #define R_HASH_SRC_LEN  (0x2c / 4)
 
 #define R_HASH_CMD      (0x30 / 4)
@@ -94,7 +96,8 @@ static int hash_algo_lookup(uint32_t reg)
     return -1;
 }
 
-static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode)
+static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode,
+                              bool acc_mode)
 {
     struct iovec iov[ASPEED_HACE_MAX_SG];
     g_autofree uint8_t *digest_buf;
@@ -103,6 +106,7 @@ static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode)
 
     if (sg_mode) {
         uint32_t len = 0;
+        uint32_t total_len = 0;
 
         for (i = 0; !(len & SG_LIST_LEN_LAST); i++) {
             uint32_t addr, src;
@@ -123,10 +127,26 @@ static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode)
                                         MEMTXATTRS_UNSPECIFIED, NULL);
             addr &= SG_LIST_ADDR_MASK;
 
-            iov[i].iov_len = len & SG_LIST_LEN_MASK;
-            plen = iov[i].iov_len;
+            plen = len & SG_LIST_LEN_MASK;
             iov[i].iov_base = address_space_map(&s->dram_as, addr, &plen, false,
                                                 MEMTXATTRS_UNSPECIFIED);
+
+            if (acc_mode) {
+                total_len += plen;
+
+                if (len & SG_LIST_LEN_LAST) {
+                    /*
+                     * In the padding message, the last 64/128 bit represents
+                     * the total length of bitstream in big endian.
+                     * SHA-224, SHA-256 are 64 bit
+                     * SHA-384, SHA-512, SHA-512/224, SHA-512/256 are 128 bit
+                     * However, we would not process such a huge bit stream.
+                     */
+                    plen -= total_len - (ldq_be_p(iov[i].iov_base + plen - 8) / 8);
+                }
+            }
+
+            iov[i].iov_len = plen;
         }
     } else {
         hwaddr len = s->regs[R_HASH_SRC_LEN];
@@ -210,6 +230,9 @@ static void aspeed_hace_write(void *opaque, hwaddr addr, uint64_t data,
     case R_HASH_DEST:
         data &= ahc->dest_mask;
         break;
+    case R_HASH_KEY_BUFF:
+        data &= ahc->key_mask;
+        break;
     case R_HASH_SRC_LEN:
         data &= 0x0FFFFFFF;
         break;
@@ -229,12 +252,13 @@ static void aspeed_hace_write(void *opaque, hwaddr addr, uint64_t data,
         }
         algo = hash_algo_lookup(data);
         if (algo < 0) {
-                qemu_log_mask(LOG_GUEST_ERROR,
-                        "%s: Invalid hash algorithm selection 0x%"PRIx64"\n",
-                        __func__, data & ahc->hash_mask);
-                break;
+            qemu_log_mask(LOG_GUEST_ERROR,
+                    "%s: Invalid hash algorithm selection 0x%"PRIx64"\n",
+                    __func__, data & ahc->hash_mask);
+            break;
         }
-        do_hash_operation(s, algo, data & HASH_SG_EN);
+        do_hash_operation(s, algo, data & HASH_SG_EN,
+                ((data & HASH_HMAC_MASK) == HASH_DIGEST_ACCUM));
 
         if (data & HASH_IRQ_EN) {
             qemu_irq_raise(s->irq);
@@ -333,6 +357,7 @@ static void aspeed_ast2400_hace_class_init(ObjectClass *klass, void *data)
 
     ahc->src_mask = 0x0FFFFFFF;
     ahc->dest_mask = 0x0FFFFFF8;
+    ahc->key_mask = 0x0FFFFFC0;
     ahc->hash_mask = 0x000003ff; /* No SG or SHA512 modes */
 }
 
@@ -351,6 +376,7 @@ static void aspeed_ast2500_hace_class_init(ObjectClass *klass, void *data)
 
     ahc->src_mask = 0x3fffffff;
     ahc->dest_mask = 0x3ffffff8;
+    ahc->key_mask = 0x3FFFFFC0;
     ahc->hash_mask = 0x000003ff; /* No SG or SHA512 modes */
 }
 
@@ -369,6 +395,7 @@ static void aspeed_ast2600_hace_class_init(ObjectClass *klass, void *data)
 
     ahc->src_mask = 0x7FFFFFFF;
     ahc->dest_mask = 0x7FFFFFF8;
+    ahc->key_mask = 0x7FFFFFF8;
     ahc->hash_mask = 0x00147FFF;
 }
 
include/hw/misc/aspeed_hace.h +1 -1
index 94d5ada95f..2242945eb4 100644
@@ -37,6 +37,7 @@ struct AspeedHACEClass {
 
     uint32_t src_mask;
     uint32_t dest_mask;
+    uint32_t key_mask;
     uint32_t hash_mask;
 };
 
--

2.25.1

#6 lore raw

Re: [PATCH v2 1/2] hw/misc: Supporting AST2600 HACE accumulative mode

Hi Joel,

Quoted 41 lines · Joel Stanley

Hello Troy,

Quoted 5 lines · Troy Lee

Accumulative mode will supply a initial state and append padding bit at the end of hash stream. However, the crypto library will padding those bit automatically, so ripped it off from iov array.

Quoted 16 lines

The aspeed ast2600 acculumative mode is described in datasheet ast2600v10.pdf section 25.6.4:
1. Allocationg and initiating accumulative hash digest write buffer with initial state.
* Since QEMU crypto/hash api doesn't provide the API to set initial state of hash library, and the initial state is already setted by crypto library (gcrypt/glib/...), so skip this step.
2. Calculating accumulative hash digest.
(a) When receiving the last accumulative data, software need to add padding message at the end of the accumulative data. Padding message described in specific of MD5, SHA-1, SHA224, SHA256, SHA512, SHA512/224, SHA512/256.
* Since the crypto library (gcrypt/glib) already pad the padding message internally.
* This patch is to remove the padding message which fed byguest machine driver.

I tested the latest aspeed SDK u-boot, loaded form mmc (with our mmc model that lives in Cedric's tree) and qemu crashed:

#0 0x00007fe867d44932 in ?? () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0 #1 0x0000557aba2b6e22 in qcrypto_glib_hash_bytesv (alg=<optimized out>, iov=0x7fe8662ee0b0, niov=1, result=0x7fe8662ee0a8, resultlen=0x7fe8662ee0a0, errp=0x0) at ../crypto/hash-glib.c:68
#2 0x0000557ab9f549ea in do_hash_operation (s=s@entry=0x7fe866e1b3b0, algo=5, sg_mode=sg_mode@entry=true, acc_mode=acc_mode@entry=true) at ../hw/misc/aspeed_hace.c:161
#3 0x0000557ab9f54dd1 in aspeed_hace_write (opaque=<optimized out>, addr=12, data=262504, size=<optimized out>) at ../hw/misc/aspeed_hace.c:260

Quoted 2 lines

WIthout your patch applied the HACE operation fails, as we do not have support for accumulative mode, but we do not crash.

I'll double check on this issue.

Quoted 146 lines
Quoted 146 lines

Changes in v2:
- Coding style
- Add accumulative mode description in comment

---
 hw/misc/aspeed_hace.c         | 43 ++++++++++++++++++++++++++++-------
 include/hw/misc/aspeed_hace.h |  1 +
 2 files changed, 36 insertions(+), 8 deletions(-)
hw/misc/aspeed_hace.c +35 -8
index 10f00e65f4..0710f44621 100644
@@ -11,6 +11,7 @@
 #include "qemu/osdep.h"
 #include "qemu/log.h"
 #include "qemu/error-report.h"
+#include "qemu/bswap.h"
 #include "hw/misc/aspeed_hace.h"
 #include "qapi/error.h"
 #include "migration/vmstate.h"
@@ -27,6 +28,7 @@
 
 #define R_HASH_SRC      (0x20 / 4)
 #define R_HASH_DEST     (0x24 / 4)
+#define R_HASH_KEY_BUFF (0x28 / 4)
 #define R_HASH_SRC_LEN  (0x2c / 4)
 
 #define R_HASH_CMD      (0x30 / 4)
@@ -94,7 +96,8 @@ static int hash_algo_lookup(uint32_t reg)
     return -1;
 }
 
-static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode)
+static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode,
+                              bool acc_mode)
 {
     struct iovec iov[ASPEED_HACE_MAX_SG];
     g_autofree uint8_t *digest_buf;
@@ -103,6 +106,7 @@ static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode)
 
     if (sg_mode) {
         uint32_t len = 0;
+        uint32_t total_len = 0;
 
         for (i = 0; !(len & SG_LIST_LEN_LAST); i++) {
             uint32_t addr, src;
@@ -123,10 +127,26 @@ static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode)
                                         MEMTXATTRS_UNSPECIFIED, NULL);
             addr &= SG_LIST_ADDR_MASK;
 
-            iov[i].iov_len = len & SG_LIST_LEN_MASK;
-            plen = iov[i].iov_len;
+            plen = len & SG_LIST_LEN_MASK;
             iov[i].iov_base = address_space_map(&s->dram_as, addr, &plen, false,
                                                 MEMTXATTRS_UNSPECIFIED);
+
+            if (acc_mode) {
+                total_len += plen;
+
+                if (len & SG_LIST_LEN_LAST) {
+                    /*
+                     * In the padding message, the last 64/128 bit represents
+                     * the total length of bitstream in big endian.
+                     * SHA-224, SHA-256 are 64 bit
+                     * SHA-384, SHA-512, SHA-512/224, SHA-512/256 are 128 bit
+                     * However, we would not process such a huge bit stream.
+                     */
+                    plen -= total_len - (ldq_be_p(iov[i].iov_base + plen - 8) / 8);
+                }
+            }
+
+            iov[i].iov_len = plen;
         }
     } else {
         hwaddr len = s->regs[R_HASH_SRC_LEN];
@@ -210,6 +230,9 @@ static void aspeed_hace_write(void *opaque, hwaddr addr, uint64_t data,
     case R_HASH_DEST:
         data &= ahc->dest_mask;
         break;
+    case R_HASH_KEY_BUFF:
+        data &= ahc->key_mask;
+        break;
     case R_HASH_SRC_LEN:
         data &= 0x0FFFFFFF;
         break;
@@ -229,12 +252,13 @@ static void aspeed_hace_write(void *opaque, hwaddr addr, uint64_t data,
         }
         algo = hash_algo_lookup(data);
         if (algo < 0) {
-                qemu_log_mask(LOG_GUEST_ERROR,
-                        "%s: Invalid hash algorithm selection 0x%"PRIx64"\n",
-                        __func__, data & ahc->hash_mask);
-                break;
+            qemu_log_mask(LOG_GUEST_ERROR,
+                    "%s: Invalid hash algorithm selection 0x%"PRIx64"\n",
+                    __func__, data & ahc->hash_mask);
+            break;
         }
-        do_hash_operation(s, algo, data & HASH_SG_EN);
+        do_hash_operation(s, algo, data & HASH_SG_EN,
+                ((data & HASH_HMAC_MASK) == HASH_DIGEST_ACCUM));
 
         if (data & HASH_IRQ_EN) {
             qemu_irq_raise(s->irq);
@@ -333,6 +357,7 @@ static void aspeed_ast2400_hace_class_init(ObjectClass *klass, void *data)
 
     ahc->src_mask = 0x0FFFFFFF;
     ahc->dest_mask = 0x0FFFFFF8;
+    ahc->key_mask = 0x0FFFFFC0;
     ahc->hash_mask = 0x000003ff; /* No SG or SHA512 modes */
 }
 
@@ -351,6 +376,7 @@ static void aspeed_ast2500_hace_class_init(ObjectClass *klass, void *data)
 
     ahc->src_mask = 0x3fffffff;
     ahc->dest_mask = 0x3ffffff8;
+    ahc->key_mask = 0x3FFFFFC0;
     ahc->hash_mask = 0x000003ff; /* No SG or SHA512 modes */
 }
 
@@ -369,6 +395,7 @@ static void aspeed_ast2600_hace_class_init(ObjectClass *klass, void *data)
 
     ahc->src_mask = 0x7FFFFFFF;
     ahc->dest_mask = 0x7FFFFFF8;
+    ahc->key_mask = 0x7FFFFFF8;
     ahc->hash_mask = 0x00147FFF;
 }
 
include/hw/misc/aspeed_hace.h +1 -1
index 94d5ada95f..2242945eb4 100644
@@ -37,6 +37,7 @@ struct AspeedHACEClass {
 
     uint32_t src_mask;
     uint32_t dest_mask;
+    uint32_t key_mask;
     uint32_t hash_mask;
 };
 
--

2.25.1

author
#7 lore raw

PATCH v2 2/2 tests/qtest: Add test for Aspeed HACE accumulative mode

In reply to Troy Lee

This add two addition test cases for accumulative mode under sg enabled.

The input vector was manually craft with "abc" + bit 1 + padding zeros + L. The padding length depends on algorithm, i.e. SHA512 (1024 bit), SHA256 (512 bit).

The result was calculated by command line sha512sum/sha256sum utilities without padding, i.e. only "abc" ascii text.

---
 tests/qtest/aspeed_hace-test.c | 145 +++++++++++++++++++++++++++++++++
 1 file changed, 145 insertions(+)
tests/qtest/aspeed_hace-test.c +145 -0
index 09ee31545e..6a2f404b93 100644
@@ -21,6 +21,7 @@
 #define  HACE_ALGO_SHA512        (BIT(5) | BIT(6))
 #define  HACE_ALGO_SHA384        (BIT(5) | BIT(6) | BIT(10))
 #define  HACE_SG_EN              BIT(18)
+#define  HACE_ACCUM_EN           BIT(8)
 
 #define HACE_STS                 0x1c
 #define  HACE_RSA_ISR            BIT(13)
@@ -96,6 +97,57 @@ static const uint8_t test_result_sg_sha256[] = {
     0x55, 0x1e, 0x1e, 0xc5, 0x80, 0xdd, 0x6d, 0x5a, 0x6e, 0xcd, 0xe9, 0xf3,
     0xd3, 0x5e, 0x6e, 0x4a, 0x71, 0x7f, 0xbd, 0xe4};
 
+/*
+ * The accumulative mode requires firmware to provide internal initial state
+ * and message padding (including length L at the end of padding).
+ *
+ * This test vector is a ascii text "abc" with padding message.
+ *
+ * Expected results were generated using command line utitiles:
+ *
+ *  echo -n -e 'abc' | dd of=/tmp/test
+ *  for hash in sha512sum sha256sum; do $hash /tmp/test; done
+ */
+static const uint8_t test_vector_accum_512[] = {
+    0x61, 0x62, 0x63, 0x80, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18};
+
+static const uint8_t test_vector_accum_256[] = {
+    0x61, 0x62, 0x63, 0x80, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18};
+
+static const uint8_t test_result_accum_sha512[] = {
+    0xdd, 0xaf, 0x35, 0xa1, 0x93, 0x61, 0x7a, 0xba, 0xcc, 0x41, 0x73, 0x49,
+    0xae, 0x20, 0x41, 0x31, 0x12, 0xe6, 0xfa, 0x4e, 0x89, 0xa9, 0x7e, 0xa2,
+    0x0a, 0x9e, 0xee, 0xe6, 0x4b, 0x55, 0xd3, 0x9a, 0x21, 0x92, 0x99, 0x2a,
+    0x27, 0x4f, 0xc1, 0xa8, 0x36, 0xba, 0x3c, 0x23, 0xa3, 0xfe, 0xeb, 0xbd,
+    0x45, 0x4d, 0x44, 0x23, 0x64, 0x3c, 0xe8, 0x0e, 0x2a, 0x9a, 0xc9, 0x4f,
+    0xa5, 0x4c, 0xa4, 0x9f};
+
+static const uint8_t test_result_accum_sha256[] = {
+    0xba, 0x78, 0x16, 0xbf, 0x8f, 0x01, 0xcf, 0xea, 0x41, 0x41, 0x40, 0xde,
+    0x5d, 0xae, 0x22, 0x23, 0xb0, 0x03, 0x61, 0xa3, 0x96, 0x17, 0x7a, 0x9c,
+    0xb4, 0x10, 0xff, 0x61, 0xf2, 0x00, 0x15, 0xad};
 
 static void write_regs(QTestState *s, uint32_t base, uint32_t src,
                        uint32_t length, uint32_t out, uint32_t method)
@@ -308,6 +360,86 @@ static void test_sha512_sg(const char *machine, const uint32_t base,
     qtest_quit(s);
 }
 
+static void test_sha256_accum(const char *machine, const uint32_t base,
+                        const uint32_t src_addr)
+{
+    QTestState *s = qtest_init(machine);
+
+    const uint32_t buffer_addr = src_addr + 0x1000000;
+    const uint32_t digest_addr = src_addr + 0x4000000;
+    uint8_t digest[32] = {0};
+    struct AspeedSgList array[] = {
+        {  cpu_to_le32(sizeof(test_vector_accum_256) | SG_LIST_LEN_LAST),
+           cpu_to_le32(buffer_addr) },
+    };
+
+    /* Check engine is idle, no busy or irq bits set */
+    g_assert_cmphex(qtest_readl(s, base + HACE_STS), ==, 0);
+
+    /* Write test vector into memory */
+    qtest_memwrite(s, buffer_addr, test_vector_accum_256, sizeof(test_vector_accum_256));
+    qtest_memwrite(s, src_addr, array, sizeof(array));
+
+    write_regs(s, base, src_addr, sizeof(test_vector_accum_256),
+               digest_addr, HACE_ALGO_SHA256 | HACE_SG_EN | HACE_ACCUM_EN);
+
+    /* Check hash IRQ status is asserted */
+    g_assert_cmphex(qtest_readl(s, base + HACE_STS), ==, 0x00000200);
+
+    /* Clear IRQ status and check status is deasserted */
+    qtest_writel(s, base + HACE_STS, 0x00000200);
+    g_assert_cmphex(qtest_readl(s, base + HACE_STS), ==, 0);
+
+    /* Read computed digest from memory */
+    qtest_memread(s, digest_addr, digest, sizeof(digest));
+
+    /* Check result of computation */
+    g_assert_cmpmem(digest, sizeof(digest),
+                    test_result_accum_sha256, sizeof(digest));
+
+    qtest_quit(s);
+}
+
+static void test_sha512_accum(const char *machine, const uint32_t base,
+                        const uint32_t src_addr)
+{
+    QTestState *s = qtest_init(machine);
+
+    const uint32_t buffer_addr = src_addr + 0x1000000;
+    const uint32_t digest_addr = src_addr + 0x4000000;
+    uint8_t digest[64] = {0};
+    struct AspeedSgList array[] = {
+        {  cpu_to_le32(sizeof(test_vector_accum_512) | SG_LIST_LEN_LAST),
+           cpu_to_le32(buffer_addr) },
+    };
+
+    /* Check engine is idle, no busy or irq bits set */
+    g_assert_cmphex(qtest_readl(s, base + HACE_STS), ==, 0);
+
+    /* Write test vector into memory */
+    qtest_memwrite(s, buffer_addr, test_vector_accum_512, sizeof(test_vector_accum_512));
+    qtest_memwrite(s, src_addr, array, sizeof(array));
+
+    write_regs(s, base, src_addr, sizeof(test_vector_accum_512),
+               digest_addr, HACE_ALGO_SHA512 | HACE_SG_EN | HACE_ACCUM_EN);
+
+    /* Check hash IRQ status is asserted */
+    g_assert_cmphex(qtest_readl(s, base + HACE_STS), ==, 0x00000200);
+
+    /* Clear IRQ status and check status is deasserted */
+    qtest_writel(s, base + HACE_STS, 0x00000200);
+    g_assert_cmphex(qtest_readl(s, base + HACE_STS), ==, 0);
+
+    /* Read computed digest from memory */
+    qtest_memread(s, digest_addr, digest, sizeof(digest));
+
+    /* Check result of computation */
+    g_assert_cmpmem(digest, sizeof(digest),
+                    test_result_accum_sha512, sizeof(digest));
+
+    qtest_quit(s);
+}
+
 struct masks {
     uint32_t src;
     uint32_t dest;
@@ -396,6 +528,16 @@ static void test_sha512_sg_ast2600(void)
     test_sha512_sg("-machine ast2600-evb", 0x1e6d0000, 0x80000000);
 }
 
+static void test_sha256_accum_ast2600(void)
+{
+    test_sha256_accum("-machine ast2600-evb", 0x1e6d0000, 0x80000000);
+}
+
+static void test_sha512_accum_ast2600(void)
+{
+    test_sha512_accum("-machine ast2600-evb", 0x1e6d0000, 0x80000000);
+}
+
 static void test_addresses_ast2600(void)
 {
     test_addresses("-machine ast2600-evb", 0x1e6d0000, &ast2600_masks);
@@ -455,6 +597,9 @@ int main(int argc, char **argv)
     qtest_add_func("ast2600/hace/sha512_sg", test_sha512_sg_ast2600);
     qtest_add_func("ast2600/hace/sha256_sg", test_sha256_sg_ast2600);
 
+    qtest_add_func("ast2600/hace/sha512_accum", test_sha512_accum_ast2600);
+    qtest_add_func("ast2600/hace/sha256_accum", test_sha256_accum_ast2600);
+
     qtest_add_func("ast2500/hace/addresses", test_addresses_ast2500);
     qtest_add_func("ast2500/hace/sha512", test_sha512_ast2500);
     qtest_add_func("ast2500/hace/sha256", test_sha256_ast2500);
Signature · 1 line
2.25.1
#8 lore raw

Re: [PATCH v2 2/2] tests/qtest: Add test for Aspeed HACE accumulative mode

[ Adding Klaus ]

Quoted 202 lines · Troy Lee

This add two addition test cases for accumulative mode under sg enabled.

The input vector was manually craft with "abc" + bit 1 + padding zeros + L. The padding length depends on algorithm, i.e. SHA512 (1024 bit), SHA256 (512 bit).

The result was calculated by command line sha512sum/sha256sum utilities without padding, i.e. only "abc" ascii text.

---
 tests/qtest/aspeed_hace-test.c | 145 +++++++++++++++++++++++++++++++++
 1 file changed, 145 insertions(+)
tests/qtest/aspeed_hace-test.c +145 -1
index 09ee31545e..6a2f404b93 100644
@@ -21,6 +21,7 @@
 #define  HACE_ALGO_SHA512        (BIT(5) | BIT(6))
 #define  HACE_ALGO_SHA384        (BIT(5) | BIT(6) | BIT(10))
 #define  HACE_SG_EN              BIT(18)
+#define  HACE_ACCUM_EN           BIT(8)
 
 #define HACE_STS                 0x1c
 #define  HACE_RSA_ISR            BIT(13)
@@ -96,6 +97,57 @@ static const uint8_t test_result_sg_sha256[] = {
     0x55, 0x1e, 0x1e, 0xc5, 0x80, 0xdd, 0x6d, 0x5a, 0x6e, 0xcd, 0xe9, 0xf3,
     0xd3, 0x5e, 0x6e, 0x4a, 0x71, 0x7f, 0xbd, 0xe4};
 
+/*
+ * The accumulative mode requires firmware to provide internal initial state
+ * and message padding (including length L at the end of padding).
+ *
+ * This test vector is a ascii text "abc" with padding message.
+ *
+ * Expected results were generated using command line utitiles:
+ *
+ *  echo -n -e 'abc' | dd of=/tmp/test
+ *  for hash in sha512sum sha256sum; do $hash /tmp/test; done
+ */
+static const uint8_t test_vector_accum_512[] = {
+    0x61, 0x62, 0x63, 0x80, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18};
+
+static const uint8_t test_vector_accum_256[] = {
+    0x61, 0x62, 0x63, 0x80, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18};
+
+static const uint8_t test_result_accum_sha512[] = {
+    0xdd, 0xaf, 0x35, 0xa1, 0x93, 0x61, 0x7a, 0xba, 0xcc, 0x41, 0x73, 0x49,
+    0xae, 0x20, 0x41, 0x31, 0x12, 0xe6, 0xfa, 0x4e, 0x89, 0xa9, 0x7e, 0xa2,
+    0x0a, 0x9e, 0xee, 0xe6, 0x4b, 0x55, 0xd3, 0x9a, 0x21, 0x92, 0x99, 0x2a,
+    0x27, 0x4f, 0xc1, 0xa8, 0x36, 0xba, 0x3c, 0x23, 0xa3, 0xfe, 0xeb, 0xbd,
+    0x45, 0x4d, 0x44, 0x23, 0x64, 0x3c, 0xe8, 0x0e, 0x2a, 0x9a, 0xc9, 0x4f,
+    0xa5, 0x4c, 0xa4, 0x9f};
+
+static const uint8_t test_result_accum_sha256[] = {
+    0xba, 0x78, 0x16, 0xbf, 0x8f, 0x01, 0xcf, 0xea, 0x41, 0x41, 0x40, 0xde,
+    0x5d, 0xae, 0x22, 0x23, 0xb0, 0x03, 0x61, 0xa3, 0x96, 0x17, 0x7a, 0x9c,
+    0xb4, 0x10, 0xff, 0x61, 0xf2, 0x00, 0x15, 0xad};
 
 static void write_regs(QTestState *s, uint32_t base, uint32_t src,
                        uint32_t length, uint32_t out, uint32_t method)
@@ -308,6 +360,86 @@ static void test_sha512_sg(const char *machine, const uint32_t base,
     qtest_quit(s);
 }
 
+static void test_sha256_accum(const char *machine, const uint32_t base,
+                        const uint32_t src_addr)
+{
+    QTestState *s = qtest_init(machine);
+
+    const uint32_t buffer_addr = src_addr + 0x1000000;
+    const uint32_t digest_addr = src_addr + 0x4000000;
+    uint8_t digest[32] = {0};
+    struct AspeedSgList array[] = {
+        {  cpu_to_le32(sizeof(test_vector_accum_256) | SG_LIST_LEN_LAST),
+           cpu_to_le32(buffer_addr) },
+    };
+
+    /* Check engine is idle, no busy or irq bits set */
+    g_assert_cmphex(qtest_readl(s, base + HACE_STS), ==, 0);
+
+    /* Write test vector into memory */
+    qtest_memwrite(s, buffer_addr, test_vector_accum_256, sizeof(test_vector_accum_256));
+    qtest_memwrite(s, src_addr, array, sizeof(array));
+
+    write_regs(s, base, src_addr, sizeof(test_vector_accum_256),
+               digest_addr, HACE_ALGO_SHA256 | HACE_SG_EN | HACE_ACCUM_EN);
+
+    /* Check hash IRQ status is asserted */
+    g_assert_cmphex(qtest_readl(s, base + HACE_STS), ==, 0x00000200);
+
+    /* Clear IRQ status and check status is deasserted */
+    qtest_writel(s, base + HACE_STS, 0x00000200);
+    g_assert_cmphex(qtest_readl(s, base + HACE_STS), ==, 0);
+
+    /* Read computed digest from memory */
+    qtest_memread(s, digest_addr, digest, sizeof(digest));
+
+    /* Check result of computation */
+    g_assert_cmpmem(digest, sizeof(digest),
+                    test_result_accum_sha256, sizeof(digest));
+
+    qtest_quit(s);
+}
+
+static void test_sha512_accum(const char *machine, const uint32_t base,
+                        const uint32_t src_addr)
+{
+    QTestState *s = qtest_init(machine);
+
+    const uint32_t buffer_addr = src_addr + 0x1000000;
+    const uint32_t digest_addr = src_addr + 0x4000000;
+    uint8_t digest[64] = {0};
+    struct AspeedSgList array[] = {
+        {  cpu_to_le32(sizeof(test_vector_accum_512) | SG_LIST_LEN_LAST),
+           cpu_to_le32(buffer_addr) },
+    };
+
+    /* Check engine is idle, no busy or irq bits set */
+    g_assert_cmphex(qtest_readl(s, base + HACE_STS), ==, 0);
+
+    /* Write test vector into memory */
+    qtest_memwrite(s, buffer_addr, test_vector_accum_512, sizeof(test_vector_accum_512));
+    qtest_memwrite(s, src_addr, array, sizeof(array));
+
+    write_regs(s, base, src_addr, sizeof(test_vector_accum_512),
+               digest_addr, HACE_ALGO_SHA512 | HACE_SG_EN | HACE_ACCUM_EN);
+
+    /* Check hash IRQ status is asserted */
+    g_assert_cmphex(qtest_readl(s, base + HACE_STS), ==, 0x00000200);
+
+    /* Clear IRQ status and check status is deasserted */
+    qtest_writel(s, base + HACE_STS, 0x00000200);
+    g_assert_cmphex(qtest_readl(s, base + HACE_STS), ==, 0);
+
+    /* Read computed digest from memory */
+    qtest_memread(s, digest_addr, digest, sizeof(digest));
+
+    /* Check result of computation */
+    g_assert_cmpmem(digest, sizeof(digest),
+                    test_result_accum_sha512, sizeof(digest));
+
+    qtest_quit(s);
+}
+
 struct masks {
     uint32_t src;
     uint32_t dest;
@@ -396,6 +528,16 @@ static void test_sha512_sg_ast2600(void)
     test_sha512_sg("-machine ast2600-evb", 0x1e6d0000, 0x80000000);
 }
 
+static void test_sha256_accum_ast2600(void)
+{
+    test_sha256_accum("-machine ast2600-evb", 0x1e6d0000, 0x80000000);
+}
+
+static void test_sha512_accum_ast2600(void)
+{
+    test_sha512_accum("-machine ast2600-evb", 0x1e6d0000, 0x80000000);
+}
+
 static void test_addresses_ast2600(void)
 {
     test_addresses("-machine ast2600-evb", 0x1e6d0000, &ast2600_masks);
@@ -455,6 +597,9 @@ int main(int argc, char **argv)
     qtest_add_func("ast2600/hace/sha512_sg", test_sha512_sg_ast2600);
     qtest_add_func("ast2600/hace/sha256_sg", test_sha256_sg_ast2600);
 
+    qtest_add_func("ast2600/hace/sha512_accum", test_sha512_accum_ast2600);
+    qtest_add_func("ast2600/hace/sha256_accum", test_sha256_accum_ast2600);
+
     qtest_add_func("ast2500/hace/addresses", test_addresses_ast2500);
     qtest_add_func("ast2500/hace/sha512", test_sha512_ast2500);
     qtest_add_func("ast2500/hace/sha256", test_sha256_ast2500);
--

2.25.1