5.15.110-rc1 review

This is the start of the stable review cycle for the 5.15.110 release. There are 13 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun, 30 Apr 2023 11:20:30 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.110-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.15.110-rc1

Alexandre Ghiti <[email protected]>
riscv: No need to relocate the dtb as it lies in the fixmap region

Alexandre Ghiti <[email protected]>
riscv: Do not set initial_boot_params to the linear address of the dtb

Alexandre Ghiti <[email protected]>
riscv: Move early dtb mapping into the fixmap region

Matthieu Baerts <[email protected]>
selftests: mptcp: join: fix "invalid address, ADD_ADDR timeout"

Stephen Boyd <[email protected]>
driver core: Don't require dynamic_debug for initcall_debug probe timing

Arınç ÜNAL <[email protected]>
USB: serial: option: add UNISOC vendor and TOZED LT70C product

Ruihan Li <[email protected]>
bluetooth: Perform careful capability checks in hci_sock_ioctl()

Daniel Vetter <[email protected]>
drm/fb-helper: set x/yres_virtual in drm_fb_helper_check_var

Jisoo Jang <[email protected]>
wifi: brcmfmac: slab-out-of-bounds read in brcmf_get_assoc_ies()

Dan Carpenter <[email protected]>
KVM: arm64: Fix buffer overflow in kvm_arm_set_fw_reg()

David Matlack <[email protected]>
KVM: arm64: Retry fault if vma_lookup() results become invalid

SeongJae Park <[email protected]>
selftests/kselftest/runner/run_one(): allow running non-executable files

Kai-Heng Feng <[email protected]>
PCI/ASPM: Remove pcie_aspm_pm_state_change()

-------------

Diffstat:

 Documentation/riscv/vm-layout.rst                  |  2 +-
 Makefile                                           |  4 +-
 arch/arm64/kvm/mmu.c                               | 47 +++++++--------
 arch/arm64/kvm/psci.c                              |  2 +
 arch/riscv/include/asm/fixmap.h                    |  8 +++
 arch/riscv/include/asm/pgtable.h                   |  8 ++-
 arch/riscv/kernel/setup.c                          |  6 +-
 arch/riscv/mm/init.c                               | 68 ++++++++++++----------
 drivers/base/dd.c                                  |  7 ++-
 drivers/gpu/drm/drm_fb_helper.c                    |  3 +
 .../broadcom/brcm80211/brcmfmac/cfg80211.c         |  5 ++
 drivers/pci/pci.c                                  |  3 -
 drivers/pci/pci.h                                  |  2 -
 drivers/pci/pcie/aspm.c                            | 19 ------
 drivers/usb/serial/option.c                        |  6 ++
 net/bluetooth/hci_sock.c                           |  9 ++-
 tools/testing/selftests/kselftest/runner.sh        | 28 +++++----
 tools/testing/selftests/net/mptcp/mptcp_join.sh    |  2 +-
 18 files changed, 124 insertions(+), 105 deletions(-)

From: Kai-Heng Feng <[email protected]>

commit 08d0cc5f34265d1a1e3031f319f594bd1970976c upstream.

pcie_aspm_pm_state_change() was introduced at the inception of PCIe ASPM code, but it can cause some issues. For instance, when ASPM config is changed via sysfs, those changes won't persist across power state change because pcie_aspm_pm_state_change() overwrites them.

Also, if the driver restores L1SS [1] after system resume, the restored state will also be overwritten by pcie_aspm_pm_state_change().

Remove pcie_aspm_pm_state_change(). If there's any hardware that really needs it to function, a quirk can be used instead.

[1] https://lore.kernel.org/linux-pci/[email protected]/

[bhelgaas: remove additional pcie_aspm_pm_state_change() call in pci_set_low_power_state(), added by
10aa5377fc8a ("PCI/PM: Split pci_raw_set_power_state()") and moved by 7957d201456f ("PCI/PM: Relocate pci_set_low_power_state()")]

---
 drivers/pci/pci.c       |    3 ---
 drivers/pci/pci.h       |    2 --
 drivers/pci/pcie/aspm.c |   19 -------------------
 3 files changed, 24 deletions(-)

@@ -1140,9 +1140,6 @@ static int pci_raw_set_power_state(struc
 	if (need_restore)
 		pci_restore_bars(dev);
 
-	if (dev->bus->self)
-		pcie_aspm_pm_state_change(dev->bus->self);
-
 	return 0;
 }
 

@@ -595,12 +595,10 @@ bool pcie_wait_for_link(struct pci_dev *
 #ifdef CONFIG_PCIEASPM
 void pcie_aspm_init_link_state(struct pci_dev *pdev);
 void pcie_aspm_exit_link_state(struct pci_dev *pdev);
-void pcie_aspm_pm_state_change(struct pci_dev *pdev);
 void pcie_aspm_powersave_config_link(struct pci_dev *pdev);
 #else
 static inline void pcie_aspm_init_link_state(struct pci_dev *pdev) { }
 static inline void pcie_aspm_exit_link_state(struct pci_dev *pdev) { }
-static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev) { }
 static inline void pcie_aspm_powersave_config_link(struct pci_dev *pdev) { }
 #endif
 

@@ -1020,25 +1020,6 @@ out:
 	up_read(&pci_bus_sem);
 }
 
-/* @pdev: the root port or switch downstream port */
-void pcie_aspm_pm_state_change(struct pci_dev *pdev)
-{
-	struct pcie_link_state *link = pdev->link_state;
-
-	if (aspm_disabled || !link)
-		return;
-	/*
-	 * Devices changed PM state, we should recheck if latency
-	 * meets all functions' requirement
-	 */
-	down_read(&pci_bus_sem);
-	mutex_lock(&aspm_lock);
-	pcie_update_aspm_capable(link->root);
-	pcie_config_aspm_path(link);
-	mutex_unlock(&aspm_lock);
-	up_read(&pci_bus_sem);
-}
-
 void pcie_aspm_powersave_config_link(struct pci_dev *pdev)
 {
 	struct pcie_link_state *link = pdev->link_state;

From: SeongJae Park <[email protected]>

commit 303f8e2d02002dbe331cab7813ee091aead3cd39 upstream.

When running a test program, 'run_one()' checks if the program has the execution permission and fails if it doesn't. However, it's easy to mistakenly lose the permissions, as some common tools like 'diff' don't support the permission change well[1]. Compared to that, making mistakes in the test program's path would only rare, as those are explicitly listed in 'TEST_PROGS'. Therefore, it might make more sense to resolve the situation on our own and run the program.

For this reason, this commit makes the test program runner function still print the warning message but to try parsing the interpreter of the program and to explicitly run it with the interpreter, in this case.

[1] https://lore.kernel.org/mm-commits/[email protected]/

---
 tools/testing/selftests/kselftest/runner.sh |   28 ++++++++++++++++++----------
 1 file changed, 18 insertions(+), 10 deletions(-)

@@ -33,9 +33,9 @@ tap_timeout()
 {
 	# Make sure tests will time out if utility is available.
 	if [ -x /usr/bin/timeout ] ; then
-		/usr/bin/timeout --foreground "$kselftest_timeout" "$1"
+		/usr/bin/timeout --foreground "$kselftest_timeout" $1
 	else
-		"$1"
+		$1
 	fi
 }
 

@@ -65,17 +65,25 @@ run_one()
 
 	TEST_HDR_MSG="selftests: $DIR: $BASENAME_TEST"
 	echo "# $TEST_HDR_MSG"
-	if [ ! -x "$TEST" ]; then
-		echo -n "# Warning: file $TEST is "
-		if [ ! -e "$TEST" ]; then
-			echo "missing!"
-		else
-			echo "not executable, correct this."
-		fi
+	if [ ! -e "$TEST" ]; then
+		echo "# Warning: file $TEST is missing!"
 		echo "not ok $test_num $TEST_HDR_MSG"
 	else
+		cmd="./$BASENAME_TEST"
+		if [ ! -x "$TEST" ]; then
+			echo "# Warning: file $TEST is not executable"
+
+			if [ $(head -n 1 "$TEST" | cut -c -2) = "#!" ]
+			then
+				interpreter=$(head -n 1 "$TEST" | cut -c 3-)
+				cmd="$interpreter ./$BASENAME_TEST"
+			else
+				echo "not ok $test_num $TEST_HDR_MSG"
+				return
+			fi
+		fi
 		cd `dirname $TEST` > /dev/null
-		((((( tap_timeout ./$BASENAME_TEST 2>&1; echo $? >&3) |
+		((((( tap_timeout "$cmd" 2>&1; echo $? >&3) |
 			tap_prefix >&4) 3>&1) |
 			(read xs; exit $xs)) 4>>"$logfile" &&
 		echo "ok $test_num $TEST_HDR_MSG") ||

From: David Matlack <[email protected]>

commit 13ec9308a85702af7c31f3638a2720863848a7f2 upstream.

Read mmu_invalidate_seq before dropping the mmap_lock so that KVM can detect if the results of vma_lookup() (e.g. vma_shift) become stale before it acquires kvm->mmu_lock. This fixes a theoretical bug where a VMA could be changed by userspace after vma_lookup() and before KVM reads the mmu_invalidate_seq, causing KVM to install page table entries based on a (possibly) no-longer-valid vma_shift.

Re-order the MMU cache top-up to earlier in user_mem_abort() so that it is not done after KVM has read mmu_invalidate_seq (i.e. so as to avoid inducing spurious fault retries).

This bug has existed since KVM/ARM's inception. It's unlikely that any sane userspace currently modifies VMAs in such a way as to trigger this race. And even with directed testing I was unable to reproduce it. But a sufficiently motivated host userspace might be able to exploit this race.

[will: Use FSC_PERM instead of ESR_ELx_FSC_PERM. Read 'mmu_notifier_seq'
instead of 'mmu_invalidate_seq'. Fix up function references in comment.]

---
 arch/arm64/kvm/mmu.c |   47 +++++++++++++++++++++--------------------------
 1 file changed, 21 insertions(+), 26 deletions(-)

@@ -998,6 +998,20 @@ static int user_mem_abort(struct kvm_vcp
 	}
 
 	/*
+	 * Permission faults just need to update the existing leaf entry,
+	 * and so normally don't require allocations from the memcache. The
+	 * only exception to this is when dirty logging is enabled at runtime
+	 * and a write fault needs to collapse a block entry into a table.
+	 */
+	if (fault_status != FSC_PERM ||
+	    (logging_active && write_fault)) {
+		ret = kvm_mmu_topup_memory_cache(memcache,
+						 kvm_mmu_cache_min_pages(kvm));
+		if (ret)
+			return ret;
+	}
+
+	/*
 	 * Let's check if we will get back a huge page backed by hugetlbfs, or
 	 * get block mapping for device MMIO region.
 	 */

@@ -1051,36 +1065,17 @@ static int user_mem_abort(struct kvm_vcp
 		fault_ipa &= ~(vma_pagesize - 1);
 
 	gfn = fault_ipa >> PAGE_SHIFT;
-	mmap_read_unlock(current->mm);
-
-	/*
-	 * Permission faults just need to update the existing leaf entry,
-	 * and so normally don't require allocations from the memcache. The
-	 * only exception to this is when dirty logging is enabled at runtime
-	 * and a write fault needs to collapse a block entry into a table.
-	 */
-	if (fault_status != FSC_PERM || (logging_active && write_fault)) {
-		ret = kvm_mmu_topup_memory_cache(memcache,
-						 kvm_mmu_cache_min_pages(kvm));
-		if (ret)
-			return ret;
-	}
 
-	mmu_seq = vcpu->kvm->mmu_notifier_seq;
 	/*
-	 * Ensure the read of mmu_notifier_seq happens before we call
-	 * gfn_to_pfn_prot (which calls get_user_pages), so that we don't risk
-	 * the page we just got a reference to gets unmapped before we have a
-	 * chance to grab the mmu_lock, which ensure that if the page gets
-	 * unmapped afterwards, the call to kvm_unmap_gfn will take it away
-	 * from us again properly. This smp_rmb() interacts with the smp_wmb()
-	 * in kvm_mmu_notifier_invalidate_<page|range_end>.
+	 * Read mmu_notifier_seq so that KVM can detect if the results of
+	 * vma_lookup() or __gfn_to_pfn_memslot() become stale prior to
+	 * acquiring kvm->mmu_lock.
 	 *
-	 * Besides, __gfn_to_pfn_memslot() instead of gfn_to_pfn_prot() is
-	 * used to avoid unnecessary overhead introduced to locate the memory
-	 * slot because it's always fixed even @gfn is adjusted for huge pages.
+	 * Rely on mmap_read_unlock() for an implicit smp_rmb(), which pairs
+	 * with the smp_wmb() in kvm_dec_notifier_count().
 	 */
-	smp_rmb();
+	mmu_seq = vcpu->kvm->mmu_notifier_seq;
+	mmap_read_unlock(current->mm);
 
 	pfn = __gfn_to_pfn_memslot(memslot, gfn, false, NULL,
 				   write_fault, &writable, NULL);

From: Dan Carpenter <[email protected]>

commit a25bc8486f9c01c1af6b6c5657234b2eee2c39d6 upstream.

The KVM_REG_SIZE() comes from the ioctl and it can be a power of two between 0-32768 but if it is more than sizeof(long) this will corrupt memory.

---
 arch/arm64/kvm/psci.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -508,6 +508,8 @@ int kvm_arm_set_fw_reg(struct kvm_vcpu *
 	u64 val;
 	int wa_level;
 
+	if (KVM_REG_SIZE(reg->id) != sizeof(val))
+		return -ENOENT;
 	if (copy_from_user(&val, uaddr, KVM_REG_SIZE(reg->id)))
 		return -EFAULT;
 

From: Jisoo Jang <[email protected]>

commit 0da40e018fd034d87c9460123fa7f897b69fdee7 upstream.

Fix a slab-out-of-bounds read that occurs in kmemdup() called from brcmf_get_assoc_ies().
The bug could occur when assoc_info->req_len, data from a URB provided by a USB device, is bigger than the size of buffer which is defined as WL_EXTRA_BUF_MAX.

Add the size check for req_len/resp_len of assoc_info.

Found by a modified version of syzkaller.

[   46.592467][    T7] ==================================================================
[   46.594687][    T7] BUG: KASAN: slab-out-of-bounds in kmemdup+0x3e/0x50
[   46.596572][    T7] Read of size 3014656 at addr ffff888019442000 by task kworker/0:1/7
[   46.598575][    T7]
[   46.599157][    T7] CPU: 0 PID: 7 Comm: kworker/0:1 Tainted: G           O      5.14.0+ #145
[   46.601333][    T7] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[   46.604360][    T7] Workqueue: events brcmf_fweh_event_worker
[   46.605943][    T7] Call Trace:
[   46.606584][    T7]  dump_stack_lvl+0x8e/0xd1
[   46.607446][    T7]  print_address_description.constprop.0.cold+0x93/0x334
[   46.608610][    T7]  ? kmemdup+0x3e/0x50
[   46.609341][    T7]  kasan_report.cold+0x79/0xd5
[   46.610151][    T7]  ? kmemdup+0x3e/0x50
[   46.610796][    T7]  kasan_check_range+0x14e/0x1b0
[   46.611691][    T7]  memcpy+0x20/0x60
[   46.612323][    T7]  kmemdup+0x3e/0x50
[   46.612987][    T7]  brcmf_get_assoc_ies+0x967/0xf60
[   46.613904][    T7]  ? brcmf_notify_vif_event+0x3d0/0x3d0
[   46.614831][    T7]  ? lock_chain_count+0x20/0x20
[   46.615683][    T7]  ? mark_lock.part.0+0xfc/0x2770
[   46.616552][    T7]  ? lock_chain_count+0x20/0x20
[   46.617409][    T7]  ? mark_lock.part.0+0xfc/0x2770
[   46.618244][    T7]  ? lock_chain_count+0x20/0x20
[   46.619024][    T7]  brcmf_bss_connect_done.constprop.0+0x241/0x2e0
[   46.620019][    T7]  ? brcmf_parse_configure_security.isra.0+0x2a0/0x2a0
[   46.620818][    T7]  ? __lock_acquire+0x181f/0x5790
[   46.621462][    T7]  brcmf_notify_connect_status+0x448/0x1950
[   46.622134][    T7]  ? rcu_read_lock_bh_held+0xb0/0xb0
[   46.622736][    T7]  ? brcmf_cfg80211_join_ibss+0x7b0/0x7b0
[   46.623390][    T7]  ? find_held_lock+0x2d/0x110
[   46.623962][    T7]  ? brcmf_fweh_event_worker+0x19f/0xc60
[   46.624603][    T7]  ? mark_held_locks+0x9f/0xe0
[   46.625145][    T7]  ? lockdep_hardirqs_on_prepare+0x3e0/0x3e0
[   46.625871][    T7]  ? brcmf_cfg80211_join_ibss+0x7b0/0x7b0
[   46.626545][    T7]  brcmf_fweh_call_event_handler.isra.0+0x90/0x100
[   46.627338][    T7]  brcmf_fweh_event_worker+0x557/0xc60
[   46.627962][    T7]  ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100
[   46.628736][    T7]  ? rcu_read_lock_sched_held+0xa1/0xd0
[   46.629396][    T7]  ? rcu_read_lock_bh_held+0xb0/0xb0
[   46.629970][    T7]  ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[   46.630649][    T7]  process_one_work+0x92b/0x1460
[   46.631205][    T7]  ? pwq_dec_nr_in_flight+0x330/0x330
[   46.631821][    T7]  ? rwlock_bug.part.0+0x90/0x90
[   46.632347][    T7]  worker_thread+0x95/0xe00
[   46.632832][    T7]  ? __kthread_parkme+0x115/0x1e0
[   46.633393][    T7]  ? process_one_work+0x1460/0x1460
[   46.633957][    T7]  kthread+0x3a1/0x480
[   46.634369][    T7]  ? set_kthread_struct+0x120/0x120
[   46.634933][    T7]  ret_from_fork+0x1f/0x30
[   46.635431][    T7]
[   46.635687][    T7] Allocated by task 7:
[   46.636151][    T7]  kasan_save_stack+0x1b/0x40
[   46.636628][    T7]  __kasan_kmalloc+0x7c/0x90
[   46.637108][    T7]  kmem_cache_alloc_trace+0x19e/0x330
[   46.637696][    T7]  brcmf_cfg80211_attach+0x4a0/0x4040
[   46.638275][    T7]  brcmf_attach+0x389/0xd40
[   46.638739][    T7]  brcmf_usb_probe+0x12de/0x1690
[   46.639279][    T7]  usb_probe_interface+0x2aa/0x760
[   46.639820][    T7]  really_probe+0x205/0xb70
[   46.640342][    T7]  __driver_probe_device+0x311/0x4b0
[   46.640876][    T7]  driver_probe_device+0x4e/0x150
[   46.641445][    T7]  __device_attach_driver+0x1cc/0x2a0
[   46.642000][    T7]  bus_for_each_drv+0x156/0x1d0
[   46.642543][    T7]  __device_attach+0x23f/0x3a0
[   46.643065][    T7]  bus_probe_device+0x1da/0x290
[   46.643644][    T7]  device_add+0xb7b/0x1eb0
[   46.644130][    T7]  usb_set_configuration+0xf59/0x16f0
[   46.644720][    T7]  usb_generic_driver_probe+0x82/0xa0
[   46.645295][    T7]  usb_probe_device+0xbb/0x250
[   46.645786][    T7]  really_probe+0x205/0xb70
[   46.646258][    T7]  __driver_probe_device+0x311/0x4b0
[   46.646804][    T7]  driver_probe_device+0x4e/0x150
[   46.647387][    T7]  __device_attach_driver+0x1cc/0x2a0
[   46.647926][    T7]  bus_for_each_drv+0x156/0x1d0
[   46.648454][    T7]  __device_attach+0x23f/0x3a0
[   46.648939][    T7]  bus_probe_device+0x1da/0x290
[   46.649478][    T7]  device_add+0xb7b/0x1eb0
[   46.649936][    T7]  usb_new_device.cold+0x49c/0x1029
[   46.650526][    T7]  hub_event+0x1c98/0x3950
[   46.650975][    T7]  process_one_work+0x92b/0x1460
[   46.651535][    T7]  worker_thread+0x95/0xe00
[   46.651991][    T7]  kthread+0x3a1/0x480
[   46.652413][    T7]  ret_from_fork+0x1f/0x30
[   46.652885][    T7]
[   46.653131][    T7] The buggy address belongs to the object at ffff888019442000
[   46.653131][    T7]  which belongs to the cache kmalloc-2k of size 2048
[   46.654669][    T7] The buggy address is located 0 bytes inside of
[   46.654669][    T7]  2048-byte region [ffff888019442000, ffff888019442800)
[   46.656137][    T7] The buggy address belongs to the page:
[   46.656720][    T7] page:ffffea0000651000 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x19440
[   46.657792][    T7] head:ffffea0000651000 order:3 compound_mapcount:0 compound_pincount:0
[   46.658673][    T7] flags: 0x100000000010200(slab|head|node=0|zone=1)
[   46.659422][    T7] raw: 0100000000010200 0000000000000000 dead000000000122 ffff888100042000
[   46.660363][    T7] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000
[   46.661236][    T7] page dumped because: kasan: bad access detected
[   46.661956][    T7] page_owner tracks the page as allocated
[   46.662588][    T7] page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP), pid 7, ts 31136961085, free_ts 0
[   46.664271][    T7]  prep_new_page+0x1aa/0x240
[   46.664763][    T7]  get_page_from_freelist+0x159a/0x27c0
[   46.665340][    T7]  __alloc_pages+0x2da/0x6a0
[   46.665847][    T7]  alloc_pages+0xec/0x1e0
[   46.666308][    T7]  allocate_slab+0x380/0x4e0
[   46.666770][    T7]  ___slab_alloc+0x5bc/0x940
[   46.667264][    T7]  __slab_alloc+0x6d/0x80
[   46.667712][    T7]  kmem_cache_alloc_trace+0x30a/0x330
[   46.668299][    T7]  brcmf_usbdev_qinit.constprop.0+0x50/0x470
[   46.668885][    T7]  brcmf_usb_probe+0xc97/0x1690
[   46.669438][    T7]  usb_probe_interface+0x2aa/0x760
[   46.669988][    T7]  really_probe+0x205/0xb70
[   46.670487][    T7]  __driver_probe_device+0x311/0x4b0
[   46.671031][    T7]  driver_probe_device+0x4e/0x150
[   46.671604][    T7]  __device_attach_driver+0x1cc/0x2a0
[   46.672192][    T7]  bus_for_each_drv+0x156/0x1d0
[   46.672739][    T7] page_owner free stack trace missing
[   46.673335][    T7]
[   46.673620][    T7] Memory state around the buggy address:
[   46.674213][    T7]  ffff888019442700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   46.675083][    T7]  ffff888019442780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   46.675994][    T7] >ffff888019442800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   46.676875][    T7]                    ^
[   46.677323][    T7]  ffff888019442880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   46.678190][    T7]  ffff888019442900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   46.679052][    T7] ==================================================================
[   46.679945][    T7] Disabling lock debugging due to kernel taint
[   46.680725][    T7] Kernel panic - not syncing:

---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c |    5 +++++
 1 file changed, 5 insertions(+)

@@ -5890,6 +5890,11 @@ static s32 brcmf_get_assoc_ies(struct br
 		(struct brcmf_cfg80211_assoc_ielen_le *)cfg->extra_buf;
 	req_len = le32_to_cpu(assoc_info->req_len);
 	resp_len = le32_to_cpu(assoc_info->resp_len);
+	if (req_len > WL_EXTRA_BUF_MAX || resp_len > WL_EXTRA_BUF_MAX) {
+		bphy_err(drvr, "invalid lengths in assoc info: req %u resp %u\n",
+			 req_len, resp_len);
+		return -EINVAL;
+	}
 	if (req_len) {
 		err = brcmf_fil_iovar_data_get(ifp, "assoc_req_ies",
 					       cfg->extra_buf,

From: Daniel Vetter <[email protected]>

commit 1935f0deb6116dd785ea64d8035eab0ff441255b upstream.

Drivers are supposed to fix this up if needed if they don't outright reject it. Uncovered by 6c11df58fd1a ("fbmem: Check virtual screen sizes in fb_set_var()").

---
 drivers/gpu/drm/drm_fb_helper.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -1327,6 +1327,9 @@ int drm_fb_helper_check_var(struct fb_va
 		return -EINVAL;
 	}
 
+	var->xres_virtual = fb->width;
+	var->yres_virtual = fb->height;
+
 	/*
 	 * Workaround for SDL 1.2, which is known to be setting all pixel format
 	 * fields values to zero in some cases. We treat this situation as a

From: Ruihan Li <[email protected]>

commit 25c150ac103a4ebeed0319994c742a90634ddf18 upstream.

Previously, capability was checked using capable(), which verified that the caller of the ioctl system call had the required capability. In addition, the result of the check would be stored in the HCI_SOCK_TRUSTED flag, making it persistent for the socket.

However, malicious programs can abuse this approach by deliberately sharing an HCI socket with a privileged task. The HCI socket will be marked as trusted when the privileged task occasionally makes an ioctl call.

This problem can be solved by using sk_capable() to check capability, which ensures that not only the current task but also the socket opener has the specified capability, thus reducing the risk of privilege escalation through the previously identified vulnerability.

---
 net/bluetooth/hci_sock.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

@@ -996,7 +996,14 @@ static int hci_sock_ioctl(struct socket
 	if (hci_sock_gen_cookie(sk)) {
 		struct sk_buff *skb;
 
-		if (capable(CAP_NET_ADMIN))
+		/* Perform careful checks before setting the HCI_SOCK_TRUSTED
+		 * flag. Make sure that not only the current task but also
+		 * the socket opener has the required capability, since
+		 * privileged programs can be tricked into making ioctl calls
+		 * on HCI sockets, and the socket should not be marked as
+		 * trusted simply because the ioctl caller is privileged.
+		 */
+		if (sk_capable(sk, CAP_NET_ADMIN))
 			hci_sock_set_flag(sk, HCI_SOCK_TRUSTED);
 
 		/* Send event to monitor */

From: Arınç ÜNAL <[email protected]>

commit a095edfc15f0832e046ae23964e249ef5c95af87 upstream.

Add UNISOC vendor ID and TOZED LT70-C modem which is based from UNISOC SL8563. The modem supports the NCM mode. Interface 0 is used for running the AT commands. Interface 12 is the ADB interface.

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1782 ProdID=4055 Rev=04.04
S:  Manufacturer=Unisoc Phone
S:  Product=Unisoc Phone
S:  SerialNumber=<redacted>
C:  #Ifs=14 Cfg#= 1 Atr=c0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm
E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#=10 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#=11 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#=12 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#=13 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm
E:  Ad=84(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm
E:  Ad=86(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 6 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm
E:  Ad=88(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 7 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

---
 drivers/usb/serial/option.c |    6 ++++++
 1 file changed, 6 insertions(+)

@@ -595,6 +595,11 @@ static void option_instat_callback(struc
 #define SIERRA_VENDOR_ID			0x1199
 #define SIERRA_PRODUCT_EM9191			0x90d3
 
+/* UNISOC (Spreadtrum) products */
+#define UNISOC_VENDOR_ID			0x1782
+/* TOZED LT70-C based on UNISOC SL8563 uses UNISOC's vendor ID */
+#define TOZED_PRODUCT_LT70C			0x4055
+
 /* Device flags */
 
 /* Highest interface number which can be used with NCTRL() and RSVD() */

@@ -2225,6 +2230,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, TOZED_PRODUCT_LT70C, 0xff, 0, 0) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);

From: Stephen Boyd <[email protected]>

commit e2f06aa885081e1391916367f53bad984714b4db upstream.

Don't require the use of dynamic debug (or modification of the kernel to add a #define DEBUG to the top of this file) to get the printk message about driver probe timing. This printk is only emitted when initcall_debug is enabled on the kernel commandline, and it isn't immediately obvious that you have to do something else to debug boot timing issues related to driver probe. Add a comment too so it doesn't get converted back to pr_debug().

---
 drivers/base/dd.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

@@ -690,7 +690,12 @@ static int really_probe_debug(struct dev
 	calltime = ktime_get();
 	ret = really_probe(dev, drv);
 	rettime = ktime_get();
-	pr_debug("probe of %s returned %d after %lld usecs\n",
+	/*
+	 * Don't change this to pr_debug() because that requires
+	 * CONFIG_DYNAMIC_DEBUG and we want a simple 'initcall_debug' on the
+	 * kernel commandline to print this all the time at the debug level.
+	 */
+	printk(KERN_DEBUG "probe of %s returned %d after %lld usecs\n",
 		 dev_name(dev), ret, ktime_us_delta(rettime, calltime));
 	return ret;
 }

From: Matthieu Baerts <[email protected]>

The "Fixes" commit mentioned below adds new MIBs counters to track some particular cases that have been fixed by its parent commit 150d1e06c4f1 ("mptcp: fix race in incoming ADD_ADDR option processing").

Unfortunately, one of the new MIB counter (AddAddrDrop) shares the same prefix as an older one (AddAddr). This breaks one selftest because it was doing a grep on "AddAddr" and it now gets 2 counters instead of 1.

This issue has been fixed upstream in a commit that was part of the same set but not backported to v5.15, see commit 6ef84b1517e0 ("selftests:
mptcp: more robust signal race test"). It has not been backported because it was fixing multiple things, some where for >v5.15.

This patch then simply extracts the only bit needed for v5.15. Now the test passes when validating the last stable v5.15 kernel.

---
 tools/testing/selftests/net/mptcp/mptcp_join.sh |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -732,7 +732,7 @@ chk_add_nr()
 	local dump_stats
 
 	printf "%-39s %s" " " "add"
-	count=`ip netns exec $ns2 nstat -as | grep MPTcpExtAddAddr | awk '{print $2}'`
+	count=`ip netns exec $ns2 nstat -as MPTcpExtAddAddr | grep MPTcpExtAddAddr | awk '{print $2}'`
 	[ -z "$count" ] && count=0
 	if [ "$count" != "$add_nr" ]; then
 		echo "[fail] got $count ADD_ADDR[s] expected $add_nr"

From: Alexandre Ghiti <[email protected]>

commit ef69d2559fe91f23d27a3d6fd640b5641787d22e upstream.

riscv establishes 2 virtual mappings:

- early_pg_dir maps the kernel which allows to discover the system memory
- swapper_pg_dir installs the final mapping (linear mapping included)

We used to map the dtb in early_pg_dir using DTB_EARLY_BASE_VA, and this mapping was not carried over in swapper_pg_dir. It happens that early_init_fdt_scan_reserved_mem() must be called before swapper_pg_dir is setup otherwise we could allocate reserved memory defined in the dtb. And this function initializes reserved_mem variable with addresses that lie in the early_pg_dir dtb mapping: when those addresses are reused with swapper_pg_dir, this mapping does not exist and then we trap.

The previous "fix" was incorrect as early_init_fdt_scan_reserved_mem() must be called before swapper_pg_dir is set up otherwise we could allocate in reserved memory defined in the dtb.

So move the dtb mapping in the fixmap region which is established in early_pg_dir and handed over to swapper_pg_dir.

This patch had to be backported because:
- the documentation for sv57 is not present here (as sv48/57 are not present)
- handling of sv48/57 is not needed (as not present)

---
 Documentation/riscv/vm-layout.rst |    2 -
 arch/riscv/include/asm/fixmap.h   |    8 ++++++
 arch/riscv/include/asm/pgtable.h  |    8 ++++--
 arch/riscv/kernel/setup.c         |    1 
 arch/riscv/mm/init.c              |   47 +++++++++++++++++++++++++++-----------
 5 files changed, 49 insertions(+), 17 deletions(-)

@@ -48,7 +48,7 @@ RISC-V Linux Kernel SV39
   ____________________________________________________________|___________________________________________________________
                     |            |                  |         |
    ffffffc000000000 | -256    GB | ffffffc7ffffffff |   32 GB | kasan
-   ffffffcefee00000 | -196    GB | ffffffcefeffffff |    2 MB | fixmap
+   ffffffcefea00000 | -196    GB | ffffffcefeffffff |    6 MB | fixmap
    ffffffceff000000 | -196    GB | ffffffceffffffff |   16 MB | PCI io
    ffffffcf00000000 | -196    GB | ffffffcfffffffff |    4 GB | vmemmap
    ffffffd000000000 | -192    GB | ffffffdfffffffff |   64 GB | vmalloc/ioremap space

@@ -22,6 +22,14 @@
  */
 enum fixed_addresses {
 	FIX_HOLE,
+	/*
+	 * The fdt fixmap mapping must be PMD aligned and will be mapped
+	 * using PMD entries in fixmap_pmd in 64-bit and a PGD entry in 32-bit.
+	 */
+	FIX_FDT_END,
+	FIX_FDT = FIX_FDT_END + FIX_FDT_SIZE / PAGE_SIZE - 1,
+
+	/* Below fixmaps will be mapped using fixmap_pte */
 	FIX_PTE,
 	FIX_PMD,
 	FIX_TEXT_POKE1,

@@ -66,9 +66,13 @@
 
 #define FIXADDR_TOP      PCI_IO_START
 #ifdef CONFIG_64BIT
-#define FIXADDR_SIZE     PMD_SIZE
+#define MAX_FDT_SIZE	 PMD_SIZE
+#define FIX_FDT_SIZE	 (MAX_FDT_SIZE + SZ_2M)
+#define FIXADDR_SIZE     (PMD_SIZE + FIX_FDT_SIZE)
 #else
-#define FIXADDR_SIZE     PGDIR_SIZE
+#define MAX_FDT_SIZE	 PGDIR_SIZE
+#define FIX_FDT_SIZE	 MAX_FDT_SIZE
+#define FIXADDR_SIZE     (PGDIR_SIZE + FIX_FDT_SIZE)
 #endif
 #define FIXADDR_START    (FIXADDR_TOP - FIXADDR_SIZE)
 

@@ -291,7 +291,6 @@ void __init setup_arch(char **cmdline_p)
 	else
 		pr_err("No DTB found in kernel mappings\n");
 #endif
-	early_init_fdt_scan_reserved_mem();
 	misc_mem_init();
 
 	init_resources();

From: Alexandre Ghiti <[email protected]>

commit f1581626071c8e37c58c5e8f0b4126b17172a211 upstream.

early_init_dt_verify() is already called in parse_dtb() and since the dtb address does not change anymore (it is now in the fixmap region), no need to reset initial_boot_params by calling early_init_dt_verify() again.

---
 arch/riscv/kernel/setup.c |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

@@ -286,10 +286,7 @@ void __init setup_arch(char **cmdline_p)
 #if IS_ENABLED(CONFIG_BUILTIN_DTB)
 	unflatten_and_copy_device_tree();
 #else
-	if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
-		unflatten_device_tree();
-	else
-		pr_err("No DTB found in kernel mappings\n");
+	unflatten_device_tree();
 #endif
 	misc_mem_init();
 

From: Alexandre Ghiti <[email protected]>

commit 1b50f956c8fe9082bdee4a9cfd798149c52f7043 upstream.

We used to access the dtb via its linear mapping address but now that the dtb early mapping was moved in the fixmap region, we can keep using this address since it is present in swapper_pg_dir, and remove the dtb relocation.

Note that the relocation was wrong anyway since early_memremap() is restricted to 256K whereas the maximum fdt size is 2MB.

---
 arch/riscv/mm/init.c |   21 ++-------------------
 1 file changed, 2 insertions(+), 19 deletions(-)

@@ -229,25 +229,8 @@ static void __init setup_bootmem(void)
 	 * early_init_fdt_reserve_self() since __pa() does
 	 * not work for DTB pointers that are fixmap addresses
 	 */
-	if (!IS_ENABLED(CONFIG_BUILTIN_DTB)) {
-		/*
-		 * In case the DTB is not located in a memory region we won't
-		 * be able to locate it later on via the linear mapping and
-		 * get a segfault when accessing it via __va(dtb_early_pa).
-		 * To avoid this situation copy DTB to a memory region.
-		 * Note that memblock_phys_alloc will also reserve DTB region.
-		 */
-		if (!memblock_is_memory(dtb_early_pa)) {
-			size_t fdt_size = fdt_totalsize(dtb_early_va);
-			phys_addr_t new_dtb_early_pa = memblock_phys_alloc(fdt_size, PAGE_SIZE);
-			void *new_dtb_early_va = early_memremap(new_dtb_early_pa, fdt_size);
-
-			memcpy(new_dtb_early_va, dtb_early_va, fdt_size);
-			early_memunmap(new_dtb_early_va, fdt_size);
-			_dtb_early_pa = new_dtb_early_pa;
-		} else
-			memblock_reserve(dtb_early_pa, fdt_totalsize(dtb_early_va));
-	}
+	if (!IS_ENABLED(CONFIG_BUILTIN_DTB))
+		memblock_reserve(dtb_early_pa, fdt_totalsize(dtb_early_va));
 
 	dma_contiguous_reserve(dma32_phys_limit);
 	if (IS_ENABLED(CONFIG_64BIT))

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Results from Linaro’s test farm.
Regressions on arm64 juno while LTP controllers testing with 5.15 kernel.

This is not always reproducible.

Crash log:
----------

[ 5059.396958] Unable to handle kernel execute from non-executable
memory at virtual address ffff80000a63eb34
[ 5059.397002] BUG: Bad rss-counter state mm:00000000f95cf07e
type:MM_FILEPAGES val:352
[ 5059.406643] Mem abort info:
[ 5059.406648]   ESR = 0x000000008600000f
[ 5059.414403] BUG: Bad rss-counter state mm:00000000f95cf07e
type:MM_ANONPAGES val:1201
[ 5059.417192]   EC = 0x21: IABT (current EL), IL = 32 bits
[ 5059.420945] BUG: non-zero pgtables_bytes on freeing mm: 45056
[ 5059.428782]   SET = 0, FnV = 0
[ 5059.442901]   EA = 0, S1PTW = 0
[ 5059.446045]   FSC = 0x0f: level 3 permission fault
[ 5059.450843] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000081e71000
[ 5059.457557] [ffff80000a63eb34] pgd=10000009fffff003,
p4d=10000009fffff003, pud=10000009ffffe003, pmd=10000009ffffa003,
pte=007800008283e703
[ 5059.470128] Internal error: Oops: 8600000f [#1] PREEMPT SMP
[ 5059.475708] Modules linked in: btrfs blake2b_generic libcrc32c xor
xor_neon zstd_compress raid6_pq cfg80211 bluetooth rfkill tda998x cec
drm_kms_helper crct10dif_ce drm fuse
[ 5059.491254] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.15.110-rc1 #1
[ 5059.497706] Hardware name: ARM Juno development board (r2) (DT)
[ 5059.503632] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 5059.510605] pc : cpu_idle_force_poll+0x0/0x4
[ 5059.514887] lr : cpu_idle_force_poll+0x0/0x4
[ 5059.519162] sp : ffff80000acf3de0
[ 5059.522476] x29: ffff0008002e8f80 x28: 0000000000000000 x27: 0000000000000000
[ 5059.529629] x26: 0000000000000002 x25: ffff000822032880 x24: ffff00097ef62f00
[ 5059.536780] x23: ffff80000a63eb64 x22: 0000000000000000 x21: 0000000000000000
[ 5059.543931] x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000000000
[ 5059.551081] x17: 000000040044ffff x16: 00500074b5503510 x15: 0000000000000000
[ 5059.558232] x14: ffff0008002e8f80 x13: ffff8009750eb000 x12: 0000000034d4d91d
[ 5059.565383] x11: 0000000000000000 x10: 0000000000001000 x9 : ffff800009252da4
[ 5059.572533] x8 : 00000074b5503510 x7 : 00000074b5503510 x6 : 000000000016e360
[ 5059.579684] x5 : 0000000000000003 x4 : 0000000000000000 x3 : ffff00097ef62f40
[ 5059.586835] x2 : 0000000000000002 x1 : 00000000002625a0 x0 : 0000000000000001
[ 5059.593986] Call trace:
[ 5059.596430]  cpu_idle_force_poll+0x0/0x4
[ 5059.600361] Code: 00000001 00000001 00000020 037e563b (00000000)
[ 5059.606463] ---[ end trace f19c34443506e9b1 ]---
[ 5059.611085] Kernel panic - not syncing: Attempted to kill the idle task!
[ 5059.617794] SMP: stopping secondary CPUs
[ 5060.733718] SMP: failed to stop secondary CPUs 1-2
[ 5060.738514] Kernel Offset: disabled
[ 5060.742002] CPU features: 0x800830f1,00000846
[ 5060.746362] Memory Limit: none
[ 5060.749418] ---[ end Kernel panic - not syncing: Attempted to kill

the idle task! ]---

log:
- https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.15.y/build/v5.15.105-361-g64fb7ad7e758/testrun/16607331/suite/log-parser-test/test/check-kernel-bug/log
- https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.15.y/build/v5.15.105-361-g64fb7ad7e758/testrun/16607331/suite/log-parser-test/tests/

## Build
* kernel: 5.15.110-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.15.y
* git commit: 64fb7ad7e758c85ebeb0c8c500e4175c65bf5778
* git describe: v5.15.105-361-g64fb7ad7e758
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.15.y/build/v5.15.105-361-g64fb7ad7e758

## Test Regressions (compared to v5.15.105-347-g579deb859f24)

* juno-r2, log-parser-test
- check-kernel-bug
- check-kernel-oops
- check-kernel-panic

## Metric Regressions (compared to v5.15.105-347-g579deb859f24)

## Test Fixes (compared to v5.15.105-347-g579deb859f24)

## Metric Fixes (compared to v5.15.105-347-g579deb859f24)

## Test result summary
total: 123779, pass: 99490, fail: 3473, skip: 20591, xfail: 225

## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 112 total, 111 passed, 1 failed
* arm64: 40 total, 38 passed, 2 failed
* i386: 30 total, 28 passed, 2 failed
* mips: 24 total, 24 passed, 0 failed
* parisc: 6 total, 6 passed, 0 failed
* powerpc: 24 total, 24 passed, 0 failed
* riscv: 8 total, 8 passed, 0 failed
* s390: 9 total, 9 passed, 0 failed
* sh: 12 total, 12 passed, 0 failed
* sparc: 6 total, 6 passed, 0 failed
* x86_64: 33 total, 31 passed, 2 failed

## Test suites summary
* boot
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-net-forwarding
* kselftest-net-mptcp
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* rcutorture
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on BMIPS_GENERIC:

Florian

Build results:

	total: 160 pass: 160 fail: 0
Qemu test results:
	total: 499 pass: 499 fail: 0

Guenter

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Successfully built and installed bindeb-pkgs for my computer (Acer E15, Intel Core i3 Haswell).

An old man doll... just what I always wanted! - Clara

Hello Greg,

Sorry it's late. Weekend & national holidays in the UK etc...

CIP configurations built and booted with Linux 5.15.110-rc1 (64fb7ad7e758):
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/pipelines/852034473/
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/commits/linux-5.15.y

Kind regards, Chris

All tests passing for Tegra ...

Test results for stable-v5.15:

    11 builds:	11 pass, 0 fail
    28 boots:	28 pass, 0 fail
    114 tests:	114 pass, 0 fail

Linux version: 5.15.110-rc1-g64fb7ad7e758
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Jon