ACPI: EC: Fix CPU frequency limitation on AMD platforms after suspend/resume
Subsystems (2)
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH 1/1 ACPI: EC: Fix CPU frequency limitation on AMD platforms after suspend/resume
From 881e57c87b9595c186c2ca7e6d35d0a52c1a10c2 Mon Sep 17 00:00:00 2001
From: Marcus Bergo <[email protected]>
Date: Sat, 19 Apr 2025 05:19:05 -0300
Subject: [PATCH] ACPI: EC: Fix CPU frequency limitation on AMD platforms after suspend/resume
Several AMD-based laptop models (Lenovo P15v Gen 3, P16v Gen 1, HP EliteBook 845 G10) experience a CPU frequency limitation issue where the processor gets stuck at approximately 544MHz after resuming from suspend when the power cord is unplugged during sleep. This issue makes the systems practically unusable until a full power cycle is performed.
The root cause was traced to commit b5539eb5ee70 ("ACPI: EC: Fix acpi_ec_dispatch_gpe()") which restored the behavior of clearing the GPE in acpi_ec_dispatch_gpe() function to prevent GPE storms. While this fix is necessary for most platforms to prevent excessive power consumption during suspend-to-idle, it causes problems on certain AMD platforms by interfering with the EC's ability to properly restore power management settings after resume.
This patch implements a targeted workaround that:
1. Adds DMI-based detection for affected AMD platforms
2. Adds a function to check if we're in suspend-to-idle mode
3. Modifies the acpi_ec_dispatch_gpe() function to handle AMD platforms specially:
- For affected AMD platforms during suspend-to-idle, it advances the transaction without clearing the GPE status bit
- For all other platforms, it maintains the existing behavior of clearing the GPE status bit
Testing was performed on a Lenovo P16v Gen 1 with AMD Ryzen 7 PRO 7840HS and confirmed that:
1. Without the patch, the CPU frequency is limited to 544MHz after the suspend/unplug/resume sequence
2. With the patch applied, the CPU properly scales up to its maximum frequency (5.1GHz) after the same sequence
3. No regressions were observed in other EC functionality (battery status, keyboard backlight, etc.)
4. Multiple suspend/resume cycles with different power states were tested without issues
The patch was also verified not to affect the behavior on Intel-based systems, ensuring that the GPE storm prevention remains effective where needed.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=218557
---
drivers/acpi/ec.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 65 insertions(+), 1 deletion(-)
drivers/acpi/ec.c +0 -0
@@ -29,6 +29,7 @@
#include <linux/acpi.h>
#include <linux/dmi.h>
#include <asm/io.h>
+#include <asm/processor.h>
#include "internal.h"
@@ -2139,6 +2140,59 @@ static bool acpi_ec_work_in_progress(struct acpi_ec *ec) return ec->events_in_progress + ec->queries_in_progress > 0;
}
+/* List of AMD platforms with CPU frequency issues after suspend/resume */ +static const struct dmi_system_id acpi_ec_amd_freq_quirk[] = {
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "P15v Gen 3"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "P16v Gen 1"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP EliteBook 845 14 inch G10 Notebook PC"), + },
+ },
+ { },
+};
+
+/* Check if we're in suspend-to-idle mode */
+static bool pm_suspend_via_s2idle(void)
+{
+#ifdef CONFIG_PM_SLEEP
+ return pm_suspend_target_state == PM_SUSPEND_TO_IDLE;
+#else
+ return false;
+#endif
+}
+
+/* Check if the system is an AMD platform with the frequency quirk */ +static bool is_amd_freq_quirk_system(void)
+{
+ static int is_quirk_system = -1;
+
+ if (is_quirk_system == -1) {
+ /* Check if it's an AMD CPU */
+ if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD) {
+ is_quirk_system = 0;
+ } else {
+ /* Check if it's in the DMI quirk list */
+ is_quirk_system = dmi_check_system(acpi_ec_amd_freq_quirk) ? 1 : 0; + }
+ }
+
+ return is_quirk_system == 1;
+}
+
+
+
bool acpi_ec_dispatch_gpe(void)
{
bool work_in_progress = false;
@@ -2172,7 +2226,17 @@ bool acpi_ec_dispatch_gpe(void)
if (acpi_ec_gpe_status_set(first_ec)) {pm_pr_dbg("ACPI EC GPE status set\n");
- clear_gpe_and_advance_transaction(first_ec, false);
+ /*
+ * Special handling for AMD platforms with CPU frequency issues + * after suspend/resume. On these platforms, we need to advance the + * transaction but NOT clear the GPE status bit when in suspend-to-idle + * state to prevent CPU frequency limitation issues.
+ */
+ if (is_amd_freq_quirk_system() && pm_suspend_via_s2idle()) {
+ advance_transaction(first_ec, false);
+ } else {
+ clear_gpe_and_advance_transaction(first_ec, false);
+ }work_in_progress = acpi_ec_work_in_progress(first_ec);
}
Signature · 1 line
2.43.0
Quoted 40 lines · M. Bergo
From
881e57c87b9595c186c2ca7e6d35d0a52c1a10c2Mon Sep 17 00:00:00 2001
From: Marcus Bergo <[email protected]>
Date: Sat, 19 Apr 2025 05:19:05 -0300
Subject: [PATCH] ACPI: EC: Fix CPU frequency limitation on AMD platforms after
suspend/resumeSeveral AMD-based laptop models (Lenovo P15v Gen 3, P16v Gen 1, HP EliteBook 845 G10) experience a CPU frequency limitation issue where the processor gets stuck at approximately 544MHz after resuming from suspend when the power cord is unplugged during sleep. This issue makes the systems practically unusable until a full power cycle is performed.
The root cause was traced to commit
b5539eb5ee70("ACPI: EC: Fixacpi_ec_dispatch_gpe()") which restored the behavior of clearing the GPE inacpi_ec_dispatch_gpe()function to prevent GPE storms. While this fix is necessary for most platforms to prevent excessive power consumption during suspend-to-idle, it causes problems on certain AMD platforms by interfering with the EC's ability to properly restore power management settings after resume.This patch implements a targeted workaround that:
1. Adds DMI-based detection for affected AMD platforms
2. Adds a function to check if we're in suspend-to-idle mode
3. Modifies theacpi_ec_dispatch_gpe()function to handle AMD platforms specially:
- For affected AMD platforms during suspend-to-idle, it advances the transaction without clearing the GPE status bit
- For all other platforms, it maintains the existing behavior of
clearing
the GPE status bitTesting was performed on a Lenovo P16v Gen 1 with AMD Ryzen 7 PRO 7840HS and confirmed that:
1. Without the patch, the CPU frequency is limited to 544MHz after the suspend/unplug/resume sequence
2. With the patch applied, the CPU properly scales up to its maximum frequency (5.1GHz) after the same sequence
3. No regressions were observed in other EC functionality (battery status, keyboard backlight, etc.)
4. Multiple suspend/resume cycles with different power states were tested without issues
Quoted 7 lines
The patch was also verified not to affect the behavior on Intel-based systems, ensuring that the GPE storm prevention remains effective where needed.
Fixes b5539eb5ee70 ("ACPI: EC: Fix acpi_ec_dispatch_gpe()")Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=218557
Reported-by Mark Pearson <[email protected]>Signed-off-by Marcus Bergo <[email protected]>
Great finding with this being a potential root cause of this behavior (at least from a Linux perspective).
Although this helps, I'm not really a fan of the tech debt accumulated by needing to quirk this on a system by system basis as a bandage.
At least for HP someone said that this commit happens to help them for the same issue you're describing:
That was surprising to me, but it must be changing the timing of some of the code running in HP's EC. Since you happen to have a Lenovo system does it happen to help the Lenovo EC too?
Mark, comments please?
Quoted 96 lines
--- drivers/acpi/ec.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 65 insertions(+), 1 deletion(-)drivers/acpi/ec.c +54
-0@@ -29,6 +29,7 @@ #include <linux/acpi.h> #include <linux/dmi.h> #include <asm/io.h> +#include <asm/processor.h> #include "internal.h"@@ -2139,6 +2140,59 @@ static bool acpi_ec_work_in_progress(struct acpi_ec *ec) return ec->events_in_progress + ec->queries_in_progress > 0; } +/* List of AMD platforms with CPU frequency issues after suspend/resume */ +static const struct dmi_system_id acpi_ec_amd_freq_quirk[] = { + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "P15v Gen 3"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "P16v Gen 1"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP EliteBook 845 14 inch G10 Notebook PC"), + }, + }, + { }, +}; + +/* Check if we're in suspend-to-idle mode */ +static bool pm_suspend_via_s2idle (void ) +{ +#ifdef CONFIG_PM_SLEEP + return pm_suspend_target_state == PM_SUSPEND_TO_IDLE; +#else + return false; +#endif +} + +/* Check if the system is an AMD platform with the frequency quirk */ +static bool is_amd_freq_quirk_system (void ) +{ + static int is_quirk_system = -1; + + if (is_quirk_system == -1) { + /* Check if it's an AMD CPU */ + if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD) { + is_quirk_system = 0; + } else { + /* Check if it's in the DMI quirk list */ + is_quirk_system = dmi_check_system(acpi_ec_amd_freq_quirk) ? 1 : 0; + } + } + + return is_quirk_system == 1; +} + + + bool acpi_ec_dispatch_gpe(void) {bool
work_in_progress= false;drivers/acpi/ec.c +2
-1@@ -2172,7 +2226,17 @@ bool acpi_ec_dispatch_gpe(void) if (acpi_ec_gpe_status_set(first_ec)) {pm_pr_dbg ("ACPI EC GPE status set\n" ); - clear_gpe_and_advance_transaction(first_ec, false); + /* +* Special handling for AMD platforms with CPU frequency issues
+ * after suspend/resume. On these platforms, we need to advance the
+ * transaction but NOT clear the GPE status bit when in suspend-to-idle
+ * state to prevent CPU frequency limitation issues. + */
+ if (is_amd_freq_quirk_system()&&pm_suspend_via_s2idle()) {
+ advance_transaction(first_ec, false);
+ } else {
+ clear_gpe_and_advance_transaction(first_ec, false);
+ }work_in_progress=acpi_ec_work_in_progress(first_ec);
}
Quoted 52 lines · Mario Limonciello
Quoted 39 lines · M. Bergo
From
881e57c87b9595c186c2ca7e6d35d0a52c1a10c2Mon Sep 17 00:00:00 2001
From: Marcus Bergo <[email protected]>
Date: Sat, 19 Apr 2025 05:19:05 -0300
Subject: [PATCH] ACPI: EC: Fix CPU frequency limitation on AMD platforms after suspend/resumeSeveral AMD-based laptop models (Lenovo P15v Gen 3, P16v Gen 1, HP EliteBook 845 G10) experience a CPU frequency limitation issue where the processor gets stuck at approximately 544MHz after resuming from suspend when the power cord is unplugged during sleep. This issue makes the systems practically unusable until a full power cycle is performed.
The root cause was traced to commit
b5539eb5ee70("ACPI: EC: Fixacpi_ec_dispatch_gpe()") which restored the behavior of clearing the GPE inacpi_ec_dispatch_gpe()function to prevent GPE storms. While this fix is necessary for most platforms to prevent excessive power consumption during suspend-to-idle, it causes problems on certain AMD platforms by interfering with the EC's ability to properly restore power management settings after resume.This patch implements a targeted workaround that:
1. Adds DMI-based detection for affected AMD platforms
2. Adds a function to check if we're in suspend-to-idle mode
3. Modifies theacpi_ec_dispatch_gpe()function to handle AMD platforms specially:
- For affected AMD platforms during suspend-to-idle, it advances the transaction without clearing the GPE status bit
- For all other platforms, it maintains the existing behavior of clearing the GPE status bitTesting was performed on a Lenovo P16v Gen 1 with AMD Ryzen 7 PRO 7840HS and confirmed that:
1. Without the patch, the CPU frequency is limited to 544MHz after the suspend/unplug/resume sequence
2. With the patch applied, the CPU properly scales up to its maximum frequency (5.1GHz) after the same sequence
3. No regressions were observed in other EC functionality (battery status, keyboard backlight, etc.)
4. Multiple suspend/resume cycles with different power states were tested without issuesQuoted 7 lines
The patch was also verified not to affect the behavior on Intel-based systems, ensuring that the GPE storm prevention remains effective where needed.
Fixes b5539eb5ee70 ("ACPI: EC: Fix acpi_ec_dispatch_gpe()")Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=218557
Reported-by Mark Pearson <[email protected]>Signed-off-by Marcus Bergo <[email protected]>Great finding with this being a potential root cause of this behavior (at least from a Linux perspective).
Although this helps, I'm not really a fan of the tech debt accumulated by needing to quirk this on a system by system basis as a bandage.
Quoted 8 lines
At least for HP someone said that this commit happens to help them for the same issue you're describing:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers- x86.git/commit/?h=fixes&id=9f5595d5f03fd4dc640607a71e89a1daa68fd19d
That was surprising to me, but it must be changing the timing of some of the code running in HP's EC. Since you happen to have a Lenovo system does it happen to help the Lenovo EC too?
Mark, comments please?
Someone just reported that the timing delay patch helped their Lenovo system as well. Can you see if it helps you too?
It does make it work fine for me, I saw the clock/timing interference and this sane this problem for Lenovo as well.
Quoted 62 lines · Mario Limonciello
Quoted 52 lines · Mario Limonciello
Quoted 39 lines · M. Bergo
From
881e57c87b9595c186c2ca7e6d35d0a52c1a10c2Mon Sep 17 00:00:00 2001
From: Marcus Bergo <[email protected]>
Date: Sat, 19 Apr 2025 05:19:05 -0300
Subject: [PATCH] ACPI: EC: Fix CPU frequency limitation on AMD platforms after suspend/resumeSeveral AMD-based laptop models (Lenovo P15v Gen 3, P16v Gen 1, HP EliteBook 845 G10) experience a CPU frequency limitation issue where the processor gets stuck at approximately 544MHz after resuming from suspend when the power cord is unplugged during sleep. This issue makes the systems practically unusable until a full power cycle is performed.
The root cause was traced to commit
b5539eb5ee70("ACPI: EC: Fixacpi_ec_dispatch_gpe()") which restored the behavior of clearing the GPE inacpi_ec_dispatch_gpe()function to prevent GPE storms. While this fix is necessary for most platforms to prevent excessive power consumption during suspend-to-idle, it causes problems on certain AMD platforms by interfering with the EC's ability to properly restore power management settings after resume.This patch implements a targeted workaround that:
1. Adds DMI-based detection for affected AMD platforms
2. Adds a function to check if we're in suspend-to-idle mode
3. Modifies theacpi_ec_dispatch_gpe()function to handle AMD platforms specially:
- For affected AMD platforms during suspend-to-idle, it advances the transaction without clearing the GPE status bit
- For all other platforms, it maintains the existing behavior of clearing the GPE status bitTesting was performed on a Lenovo P16v Gen 1 with AMD Ryzen 7 PRO 7840HS and confirmed that:
1. Without the patch, the CPU frequency is limited to 544MHz after the suspend/unplug/resume sequence
2. With the patch applied, the CPU properly scales up to its maximum frequency (5.1GHz) after the same sequence
3. No regressions were observed in other EC functionality (battery status, keyboard backlight, etc.)
4. Multiple suspend/resume cycles with different power states were tested without issuesQuoted 7 lines
The patch was also verified not to affect the behavior on Intel-based systems, ensuring that the GPE storm prevention remains effective where needed.
Fixes b5539eb5ee70 ("ACPI: EC: Fix acpi_ec_dispatch_gpe()")Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=218557
Reported-by Mark Pearson <[email protected]>Signed-off-by Marcus Bergo <[email protected]>Great finding with this being a potential root cause of this behavior (at least from a Linux perspective).
Although this helps, I'm not really a fan of the tech debt accumulated by needing to quirk this on a system by system basis as a bandage.
Quoted 8 lines
At least for HP someone said that this commit happens to help them for the same issue you're describing:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers- x86.git/commit/?h=fixes&id=9f5595d5f03fd4dc640607a71e89a1daa68fd19d
That was surprising to me, but it must be changing the timing of some of the code running in HP's EC. Since you happen to have a Lenovo system does it happen to help the Lenovo EC too?
Mark, comments please?
Someone just reported that the timing delay patch helped their Lenovo system as well. Can you see if it helps you too?
Quoted 1 line · M. Bergo
It does make it work fine for me, I saw the clock/timing interference and this sane this problem for Lenovo as well.
Huh? I think you have a typo; but I don't know what you actually meant.
So you're saying the timing patch helps your system as well?
Thanks,
Quoted 64 lines · Mario Limonciello
Quoted 62 lines · Mario Limonciello
Quoted 52 lines · M. Bergo
Quoted 39 lines
From
881e57c87b9595c186c2ca7e6d35d0a52c1a10c2Mon Sep 17 00:00:00 2001
From: Marcus Bergo <[email protected]>
Date: Sat, 19 Apr 2025 05:19:05 -0300
Subject: [PATCH] ACPI: EC: Fix CPU frequency limitation on AMD platforms after suspend/resumeSeveral AMD-based laptop models (Lenovo P15v Gen 3, P16v Gen 1, HP EliteBook 845 G10) experience a CPU frequency limitation issue where the processor gets stuck at approximately 544MHz after resuming from suspend when the power cord is unplugged during sleep. This issue makes the systems practically unusable until a full power cycle is performed.
The root cause was traced to commit
b5539eb5ee70("ACPI: EC: Fixacpi_ec_dispatch_gpe()") which restored the behavior of clearing the GPE inacpi_ec_dispatch_gpe()function to prevent GPE storms. While this fix is necessary for most platforms to prevent excessive power consumption during suspend-to-idle, it causes problems on certain AMD platforms by interfering with the EC's ability to properly restore power management settings after resume.This patch implements a targeted workaround that:
1. Adds DMI-based detection for affected AMD platforms
2. Adds a function to check if we're in suspend-to-idle mode
3. Modifies theacpi_ec_dispatch_gpe()function to handle AMD platforms specially:
- For affected AMD platforms during suspend-to-idle, it advances the transaction without clearing the GPE status bit
- For all other platforms, it maintains the existing behavior of clearing the GPE status bitTesting was performed on a Lenovo P16v Gen 1 with AMD Ryzen 7 PRO 7840HS and confirmed that:
1. Without the patch, the CPU frequency is limited to 544MHz after the suspend/unplug/resume sequence
2. With the patch applied, the CPU properly scales up to its maximum frequency (5.1GHz) after the same sequence
3. No regressions were observed in other EC functionality (battery status, keyboard backlight, etc.)
4. Multiple suspend/resume cycles with different power states were tested without issuesQuoted 7 lines
The patch was also verified not to affect the behavior on Intel- based systems, ensuring that the GPE storm prevention remains effective where needed.
Fixes b5539eb5ee70 ("ACPI: EC: Fix acpi_ec_dispatch_gpe()")Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=218557
Reported-by Mark Pearson <[email protected]>Signed-off-by Marcus Bergo <[email protected]>Great finding with this being a potential root cause of this behavior (at least from a Linux perspective).
Although this helps, I'm not really a fan of the tech debt accumulated by needing to quirk this on a system by system basis as a bandage.
Quoted 8 lines
At least for HP someone said that this commit happens to help them for the same issue you're describing:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform- drivers- x86.git/commit/? h=fixes&id=9f5595d5f03fd4dc640607a71e89a1daa68fd19d
That was surprising to me, but it must be changing the timing of some of the code running in HP's EC. Since you happen to have a Lenovo system does it happen to help the Lenovo EC too?
Mark, comments please?
Someone just reported that the timing delay patch helped their Lenovo system as well. Can you see if it helps you too?
A message that is not in the archive (sent off-list or not yet received): CAJOrcgV-5tr66YbDd_mCL00YHg7nPVdJUon9Az7pZQXpNtwUoA@mail.gmail.com
Quoted 2 lines · Marcus Bergo
Yes, it does.
OK thanks for confirming. Considering your finding with this patch you've shared and knowing there is a timing dependency that delaying the next s2idle cycle helps I do wonder if we should keep exploring.
Rafael, do you have thoughts here? Specifically do you think it's worth revisiting if b5539eb5ee70 was the correct move.
Quoted 138 lines · On Sun, Apr 27, 2025 at 11:06 PM Mario Limonciello <[email protected]…
On 4/27/2025 1:34 PM, M. Bergo wrote:
> It does make it work fine for me, I saw the clock/timing
interference
> and this sane this problem for Lenovo as well.Huh? I think you have a typo; but I don't know what you actually meant.
So you're saying the timing patch helps your system as well?
Thanks,
>
> On 4/24/25 11:11 AM, Mario Limonciello wrote:
>> On 4/19/2025 1:03 PM, Mario Limonciello wrote:
>>> On 4/19/2025 4:28 AM, M. Bergo wrote:
>>>> From881e57c87b9595c186c2ca7e6d35d0a52c1a10c2Mon Sep 17
00:00:00 2001
>>>> From: Marcus Bergo <[email protected]
<mailto:[email protected]>>
>>>> Date: Sat, 19 Apr 2025 05:19:05 -0300
>>>> Subject: [PATCH] ACPI: EC: Fix CPU frequency limitation on AMD >>>> platforms after
>>>> suspend/resume
>>>>
>>>> Several AMD-based laptop models (Lenovo P15v Gen 3, P16v Gen
1, HP
>>>> EliteBook 845 G10)
>>>> experience a CPU frequency limitation issue where the
processor gets
>>>> stuck at
>>>> approximately 544MHz after resuming from suspend when the
power cord
>>>> is unplugged
>>>> during sleep. This issue makes the systems practically unusable >>>> until a full
>>>> power cycle is performed.
>>>>
>>>> The root cause was traced to commitb5539eb5ee70("ACPI: EC: Fix >>>>acpi_ec_dispatch_gpe()") which restored the behavior of
clearing the
>>>> GPE
>>>> inacpi_ec_dispatch_gpe()function to prevent GPE storms.
While this
>>>> fix is
>>>> necessary for most platforms to prevent excessive power
consumption
>>>> during
>>>> suspend-to-idle, it causes problems on certain AMD platforms by >>>> interfering
>>>> with the EC's ability to properly restore power management
settings
>>>> after resume.
>>>>
>>>> This patch implements a targeted workaround that:
>>>> 1. Adds DMI-based detection for affected AMD platforms >>>> 2. Adds a function to check if we're in suspend-to-idle mode >>>> 3. Modifies theacpi_ec_dispatch_gpe()function to handle AMD >>>> platforms specially:
>>>> - For affected AMD platforms during suspend-to-idle, it
advances
>>>> the
>>>> transaction without clearing the GPE status bit >>>> - For all other platforms, it maintains the existing
behavior of
>>>> clearing
>>>> the GPE status bit
>>>>
>>>> Testing was performed on a Lenovo P16v Gen 1 with AMD Ryzen 7 PRO >>>> 7840HS and
>>>> confirmed that:
>>>> 1. Without the patch, the CPU frequency is limited to 544MHz
after the
>>>> suspend/unplug/resume sequence
>>>> 2. With the patch applied, the CPU properly scales up to its
maximum
>>>> frequency
>>>> (5.1GHz) after the same sequence
>>>> 3. No regressions were observed in other EC functionality
(battery
>>>> status,
>>>> keyboard backlight, etc.)
>>>> 4. Multiple suspend/resume cycles with different power states
were
>>>> tested
>>>> without issues
>>>>
>>>> The patch was also verified not to affect the behavior on Intel- >>>> based systems,
>>>> ensuring that the GPE storm prevention remains effective where
needed.
>>>>
>>>> Fixes:b5539eb5ee70("ACPI: EC: Fixacpi_ec_dispatch_gpe()") >>>> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=218557
<https://bugzilla.kernel.org/show_bug.cgi?id=218557>
>>>> Reported-by: Mark Pearson <[email protected]
<mailto:[email protected]>>
>>>> Signed-off-by: Marcus Bergo <[email protected]
<mailto:[email protected]>>
>>>
>>> Great finding with this being a potential root cause of this
behavior
>>> (at least from a Linux perspective).
>>>
>>> Although this helps, I'm not really a fan of the tech debt >>> accumulated by needing to quirk this on a system by system
basis as a
>>> bandage.
>>>
>>> At least for HP someone said that this commit happens to help them >>> for the same issue you're describing:
>>>
>>> https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-
<https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform->
>>> drivers- x86.git/commit/?
>>> h=fixes&id=9f5595d5f03fd4dc640607a71e89a1daa68fd19d >>>
>>> That was surprising to me, but it must be changing the timing
of some
>>> of the code running in HP's EC. Since you happen to have a Lenovo >>> system does it happen to help the Lenovo EC too?
>>>
>>> Mark, comments please?
>>>
>> Someone just reported that the timing delay patch helped their
Lenovo
>> system as well. Can you see if it helps you too?Signature · 4 lines
* * * Marcus Bergo*
Rafael J. Wysocki
maintainerQuoted 11 lines · Mario Limonciello
Quoted 2 lines · Marcus Bergo
Yes, it does.
OK thanks for confirming. Considering your finding with this patch you've shared and knowing there is a timing dependency that delaying the next s2idle cycle helps I do wonder if we should keep exploring.
Rafael, do you have thoughts here? Specifically do you think it's worth revisiting if
b5539eb5ee70was the correct move.
Well, it was done for a reason that is explained in its changelog. I think that the problem addressed by it is genuine, isn't it?
Quoted 141 lines
Quoted 139 lines
On Sun, Apr 27, 2025 at 11:06 PM Mario Limonciello <[email protected] <mailto:[email protected]>> wrote:
On 4/27/2025 1:34 PM, M. Bergo wrote:
> It does make it work fine for me, I saw the clock/timing
interference
> and this sane this problem for Lenovo as well.Huh? I think you have a typo; but I don't know what you actually meant.
So you're saying the timing patch helps your system as well?
Thanks,
>
> On 4/24/25 11:11 AM, Mario Limonciello wrote:
>> On 4/19/2025 1:03 PM, Mario Limonciello wrote:
>>> On 4/19/2025 4:28 AM, M. Bergo wrote:
>>>> From881e57c87b9595c186c2ca7e6d35d0a52c1a10c2Mon Sep 17
00:00:00 2001
>>>> From: Marcus Bergo <[email protected]
<mailto:[email protected]>>
>>>> Date: Sat, 19 Apr 2025 05:19:05 -0300
>>>> Subject: [PATCH] ACPI: EC: Fix CPU frequency limitation on AMD >>>> platforms after
>>>> suspend/resume
>>>>
>>>> Several AMD-based laptop models (Lenovo P15v Gen 3, P16v Gen
1, HP
>>>> EliteBook 845 G10)
>>>> experience a CPU frequency limitation issue where the
processor gets
>>>> stuck at
>>>> approximately 544MHz after resuming from suspend when the
power cord
>>>> is unplugged
>>>> during sleep. This issue makes the systems practically unusable >>>> until a full
>>>> power cycle is performed.
>>>>
>>>> The root cause was traced to commitb5539eb5ee70("ACPI: EC: Fix >>>>acpi_ec_dispatch_gpe()") which restored the behavior of
clearing the
>>>> GPE
>>>> inacpi_ec_dispatch_gpe()function to prevent GPE storms.
While this
>>>> fix is
>>>> necessary for most platforms to prevent excessive power
consumption
>>>> during
>>>> suspend-to-idle, it causes problems on certain AMD platforms by >>>> interfering
>>>> with the EC's ability to properly restore power management
settings
>>>> after resume.
>>>>
>>>> This patch implements a targeted workaround that:
>>>> 1. Adds DMI-based detection for affected AMD platforms >>>> 2. Adds a function to check if we're in suspend-to-idle mode >>>> 3. Modifies theacpi_ec_dispatch_gpe()function to handle AMD >>>> platforms specially:
>>>> - For affected AMD platforms during suspend-to-idle, it
advances
>>>> the
>>>> transaction without clearing the GPE status bit
>>>> - For all other platforms, it maintains the existing
behavior of
>>>> clearing
>>>> the GPE status bit
>>>>
>>>> Testing was performed on a Lenovo P16v Gen 1 with AMD Ryzen 7 PRO >>>> 7840HS and
>>>> confirmed that:
>>>> 1. Without the patch, the CPU frequency is limited to 544MHz
after the
>>>> suspend/unplug/resume sequence
>>>> 2. With the patch applied, the CPU properly scales up to its
maximum
>>>> frequency
>>>> (5.1GHz) after the same sequence
>>>> 3. No regressions were observed in other EC functionality
(battery
>>>> status,
>>>> keyboard backlight, etc.)
>>>> 4. Multiple suspend/resume cycles with different power states
were
>>>> tested
>>>> without issues
>>>>
>>>> The patch was also verified not to affect the behavior on Intel- >>>> based systems,
>>>> ensuring that the GPE storm prevention remains effective where
needed.
>>>>
>>>> Fixes:b5539eb5ee70("ACPI: EC: Fixacpi_ec_dispatch_gpe()") >>>> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=218557
<https://bugzilla.kernel.org/show_bug.cgi?id=218557>
>>>> Reported-by: Mark Pearson <[email protected]
<mailto:[email protected]>>
>>>> Signed-off-by: Marcus Bergo <[email protected]
<mailto:[email protected]>>
>>>
>>> Great finding with this being a potential root cause of this
behavior
>>> (at least from a Linux perspective).
>>>
>>> Although this helps, I'm not really a fan of the tech debt >>> accumulated by needing to quirk this on a system by system
basis as a
>>> bandage.
>>>
>>> At least for HP someone said that this commit happens to help them >>> for the same issue you're describing:
>>>
>>> https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-
<https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform->
>>> drivers- x86.git/commit/?
>>> h=fixes&id=9f5595d5f03fd4dc640607a71e89a1daa68fd19d >>>
>>> That was surprising to me, but it must be changing the timing
of some
>>> of the code running in HP's EC. Since you happen to have a Lenovo >>> system does it happen to help the Lenovo EC too?
>>>
>>> Mark, comments please?
>>>
>> Someone just reported that the timing delay patch helped their
Lenovo
>> system as well. Can you see if it helps you too?--
*
*
*
Marcus Bergo*
Quoted 11 lines · Rafael J. Wysocki
Quoted 9 lines · Mario Limonciello
Quoted 2 lines · Marcus Bergo
Yes, it does.
OK thanks for confirming. Considering your finding with this patch you've shared and knowing there is a timing dependency that delaying the next s2idle cycle helps I do wonder if we should keep exploring.
Quoted 6 lines
Quoted 2 lines
Rafael, do you have thoughts here? Specifically do you think it's worth revisiting if
b5539eb5ee70was the correct move.Well, it was done for a reason that is explained in its changelog. I think that the problem addressed by it is genuine, isn't it?
I mean yes - of course. My inquiry was whether this should be the default behavior or if it should have been a quirked behavior.
I don't have a good sense for the rest of the ecosystem what the impacts would really be at flipping it. Would it be worth adding a module parameter debug knob and survey what happens on a wide variety of machines?
Rafael J. Wysocki
maintainerQuoted 13 lines · Mario Limonciello
Quoted 11 lines · Rafael J. Wysocki
Quoted 9 lines · Mario Limonciello
Quoted 2 lines · Marcus Bergo
Yes, it does.
OK thanks for confirming. Considering your finding with this patch you've shared and knowing there is a timing dependency that delaying the next s2idle cycle helps I do wonder if we should keep exploring.
Quoted 8 lines
Quoted 6 lines
Quoted 2 lines
Rafael, do you have thoughts here? Specifically do you think it's worth revisiting if
b5539eb5ee70was the correct move.Well, it was done for a reason that is explained in its changelog. I think that the problem addressed by it is genuine, isn't it?
I mean yes - of course. My inquiry was whether this should be the default behavior or if it should have been a quirked behavior.
I believe that it should be the default behavior because the EC GPE needs to be cleared after handling an EC event which effectively is what the suspend-to-idle code does.
Quoted 3 lines
I don't have a good sense for the rest of the ecosystem what the impacts would really be at flipping it. Would it be worth adding a module parameter debug knob and survey what happens on a wide variety of machines?
Maybe, if you suspect that this might be a widespread issue.
Quoted 28 lines · Rafael J. Wysocki
Quoted 13 lines · Mario Limonciello
Quoted 11 lines · Rafael J. Wysocki
Quoted 9 lines · Mario Limonciello
Quoted 2 lines · Marcus Bergo
Yes, it does.
OK thanks for confirming. Considering your finding with this patch you've shared and knowing there is a timing dependency that delaying the next s2idle cycle helps I do wonder if we should keep exploring.
Quoted 8 lines
Quoted 6 lines
Quoted 2 lines
Rafael, do you have thoughts here? Specifically do you think it's worth revisiting if
b5539eb5ee70was the correct move.Well, it was done for a reason that is explained in its changelog. I think that the problem addressed by it is genuine, isn't it?
I mean yes - of course. My inquiry was whether this should be the default behavior or if it should have been a quirked behavior.
I believe that it should be the default behavior because the EC GPE needs to be cleared after handling an EC event which effectively is what the suspend-to-idle code does.
Quoted 5 lines
Quoted 3 lines
I don't have a good sense for the rest of the ecosystem what the impacts would really be at flipping it. Would it be worth adding a module parameter debug knob and survey what happens on a wide variety of machines?
Maybe, if you suspect that this might be a widespread issue.
Marcus,
Before going down this path I have an important confirmation I need from you.
With just /your/ patch in place did you see a message like this in your kernel log?
amd_pmc AMDI000A:00: Last suspend didn't reach deepest state
If so; your patch just papered over the real issue and blocked the system from getting into a deep state.
PATCH 1/1 ACPI: EC: Fix CPU frequency limitation on AMD platforms after suspend/resume
In reply to M. BergoSeveral AMD-based laptop models (Lenovo P15v Gen 3, P16v Gen 1, HP EliteBook 845 G10)
experience a CPU frequency limitation issue where the processor gets stuck at
approximately 544MHz after resuming from suspend when the power cord is unplugged
during sleep. This issue makes the systems practically unusable until a full
power cycle is performed.
The root cause was traced to commit b5539eb5ee70 ("ACPI: EC: Fix
acpi_ec_dispatch_gpe()") which restored the behavior of clearing the GPE
in acpi_ec_dispatch_gpe() function to prevent GPE storms. While this fix is
necessary for most platforms to prevent excessive power consumption during
suspend-to-idle, it causes problems on certain AMD platforms by interfering
with the EC's ability to properly restore power management settings after resume.
This patch implements a targeted workaround that:
1. Adds DMI-based detection for affected AMD platforms
2. Adds a function to check if we're in suspend-to-idle mode
3. Modifies the acpi_ec_dispatch_gpe() function to handle AMD platforms specially:
- For affected AMD platforms during suspend-to-idle, it advances the
transaction without clearing the GPE status bit
- For all other platforms, it maintains the existing behavior of clearing
the GPE status bit
Testing was performed on a Lenovo P16v Gen 1 with AMD Ryzen 7 PRO 7840HS and
confirmed that:
1. Without the patch, the CPU frequency is limited to 544MHz after the
suspend/unplug/resume sequence
2. With the patch applied, the CPU properly scales up to its maximum frequency
(5.1GHz) after the same sequence
3. No regressions were observed in other EC functionality (battery status,
keyboard backlight, etc.)
4. Multiple suspend/resume cycles with different power states were tested
without issues
The patch was also verified not to affect the behavior on Intel-based systems,
ensuring that the GPE storm prevention remains effective where needed.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=218557
---
drivers/acpi/ec.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 65 insertions(+), 1 deletion(-)
drivers/acpi/ec.c +0 -0
index 3c5f34892734..f3698f3c100f 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -29,6 +29,7 @@
#include <linux/acpi.h>
#include <linux/dmi.h>
#include <asm/io.h>
+#include <asm/processor.h>
#include "internal.h"
@@ -2139,6 +2140,59 @@ static bool acpi_ec_work_in_progress(struct acpi_ec *ec)
return ec->events_in_progress + ec->queries_in_progress > 0;
}
+/* List of AMD platforms with CPU frequency issues after suspend/resume */
+static const struct dmi_system_id acpi_ec_amd_freq_quirk[] = {
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "P15v Gen 3"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "P16v Gen 1"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP EliteBook 845 14 inch G10 Notebook PC"),
+ },
+ },
+ { },
+};
+
+/* Check if we're in suspend-to-idle mode */
+static bool pm_suspend_via_s2idle(void)
+{
+#ifdef CONFIG_PM_SLEEP
+ return pm_suspend_target_state == PM_SUSPEND_TO_IDLE;
+#else
+ return false;
+#endif
+}
+
+/* Check if the system is an AMD platform with the frequency quirk */
+static bool is_amd_freq_quirk_system(void)
+{
+ static int is_quirk_system = -1;
+
+ if (is_quirk_system == -1) {
+ /* Check if it's an AMD CPU */
+ if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD) {
+ is_quirk_system = 0;
+ } else {
+ /* Check if it's in the DMI quirk list */
+ is_quirk_system = dmi_check_system(acpi_ec_amd_freq_quirk) ? 1 : 0;
+ }
+ }
+
+ return is_quirk_system == 1;
+}
+
+
+
bool acpi_ec_dispatch_gpe(void)
{
bool work_in_progress = false;
@@ -2172,7 +2226,17 @@ bool acpi_ec_dispatch_gpe(void)
if (acpi_ec_gpe_status_set(first_ec)) {
pm_pr_dbg("ACPI EC GPE status set\n");
- clear_gpe_and_advance_transaction(first_ec, false);
+ /*
+ * Special handling for AMD platforms with CPU frequency issues
+ * after suspend/resume. On these platforms, we need to advance the
+ * transaction but NOT clear the GPE status bit when in suspend-to-idle
+ * state to prevent CPU frequency limitation issues.
+ */
+ if (is_amd_freq_quirk_system() && pm_suspend_via_s2idle()) {
+ advance_transaction(first_ec, false);
+ } else {
+ clear_gpe_and_advance_transaction(first_ec, false);
+ }
work_in_progress = acpi_ec_work_in_progress(first_ec);
}