Skip to contentSkip to conversation

dt-bindings: can: xilinx_can: Document phys and update maintainer

PATCH In review Harini T 3 participants 7 messages Jul 17 – Jul 20

Subsystems (4)
lore
Share & tools
lore

Harini T

author maintainer
#0 lore raw

cover dt-bindings: can: xilinx_can: Document phys and update maintainer

The Xilinx CAN and CANFD controllers can be connected to an external CAN transceiver on the board, described from the controller node via the standard "phys" property. This binding-only series documents that property and updates the Xilinx CAN driver maintainer.

Patch 1 replaces the maintainer of the Xilinx CAN driver in both the MAINTAINERS entry and the binding's maintainers list.

Patch 2 documents the optional "phys" property (a single transceiver PHY).

Harini T (2):
MAINTAINERS: Replace maintainer for Xilinx CAN driver
dt-bindings: can: xilinx_can: Document phys property

 Documentation/devicetree/bindings/net/can/xilinx,can.yaml | 5 ++++-
 MAINTAINERS                                               | 2 +-
 2 files changed, 5 insertions(+), 2 deletions(-)
Signature · 1 line
2.34.1
author maintainer
#1 lore raw

PATCH 1/2 MAINTAINERS: Replace maintainer for Xilinx CAN driver

Replace Appana Durga Kedareswara rao with Harini T as the maintainer of the Xilinx CAN driver. Kedar is no longer maintaining it.

---
 Documentation/devicetree/bindings/net/can/xilinx,can.yaml | 2 +-
 MAINTAINERS                                               | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/net/can/xilinx,can.yaml +1 -1
index 40835497050a..e705c719f7b5 100644
@@ -8,7 +8,7 @@ title:
   Xilinx CAN and CANFD controller
 
 maintainers:
-  - Appana Durga Kedareswara rao <[email protected]>
+  - Harini T <[email protected]>
 
 properties:
   compatible:
MAINTAINERS +1 -1
index 7a2ffd9d37d5..db619dcaddbf 100644
@@ -28874,7 +28874,7 @@ F:	Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
 F:	drivers/net/ethernet/xilinx/xilinx_axienet*
 
 XILINX CAN DRIVER
-M:	Appana Durga Kedareswara rao <[email protected]>
+M:	Harini T <[email protected]>
 L:	[email protected]
 S:	Maintained
 F:	Documentation/devicetree/bindings/net/can/xilinx,can.yaml
Signature · 1 line
2.34.1
Acked-by on v1 1/2
#2 lore raw

Re: [PATCH 1/2] MAINTAINERS: Replace maintainer for Xilinx CAN driver

Quoted 8 lines · Harini T

Replace Appana Durga Kedareswara rao with Harini T as the maintainer of the Xilinx CAN driver. Kedar is no longer maintaining it.

---
 Documentation/devicetree/bindings/net/can/xilinx,can.yaml | 2 +-
 MAINTAINERS                                               | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

Best regards,
Krzysztof

#3 lore raw

Re: [PATCH 1/2] MAINTAINERS: Replace maintainer for Xilinx CAN driver

In reply to Harini T
Quoted 27 lines · Harini T

Replace Appana Durga Kedareswara rao with Harini T as the maintainer of the Xilinx CAN driver. Kedar is no longer maintaining it.

---
  Documentation/devicetree/bindings/net/can/xilinx,can.yaml | 2 +-
  MAINTAINERS                                               | 2 +-
  2 files changed, 2 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/net/can/xilinx,can.yaml +1 -1
index 40835497050a..e705c719f7b5 100644
@@ -8,7 +8,7 @@ title:
    Xilinx CAN and CANFD controller
 
  maintainers:
-  - Appana Durga Kedareswara rao <[email protected]>
+  - Harini T <[email protected]>
 
  properties:
    compatible:
MAINTAINERS +0 -0
index 7a2ffd9d37d5..db619dcaddbf 100644

MAINTAINERS F: Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml · line 28880

Quoted 8 lines
MAINTAINERS +1 -1
@@ -28874,7 +28874,7 @@ F:	Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
  F:	drivers/net/ethernet/xilinx/xilinx_axienet*
 
  XILINX CAN DRIVER
-M:	Appana Durga Kedareswara rao <[email protected]>
+M:	Harini T <[email protected]>
  L:	[email protected]
  S:	Maintained
  F:	Documentation/devicetree/bindings/net/can/xilinx,can.yaml

Regards,
Kedar

#4 lore raw

Re: [PATCH 1/2] MAINTAINERS: Replace maintainer for Xilinx CAN driver

In reply to Harini T
Quoted 27 lines · Harini T

Replace Appana Durga Kedareswara rao with Harini T as the maintainer of the Xilinx CAN driver. Kedar is no longer maintaining it.

---
  Documentation/devicetree/bindings/net/can/xilinx,can.yaml | 2 +-
  MAINTAINERS                                               | 2 +-
  2 files changed, 2 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/net/can/xilinx,can.yaml +1 -1
index 40835497050a..e705c719f7b5 100644
@@ -8,7 +8,7 @@ title:
    Xilinx CAN and CANFD controller
 
  maintainers:
-  - Appana Durga Kedareswara rao <[email protected]>
+  - Harini T <[email protected]>
 
  properties:
    compatible:
MAINTAINERS +0 -0
index 7a2ffd9d37d5..db619dcaddbf 100644

MAINTAINERS F: Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml · line 28880

Quoted 8 lines
MAINTAINERS +1 -1
@@ -28874,7 +28874,7 @@ F:	Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
  F:	drivers/net/ethernet/xilinx/xilinx_axienet*
 
  XILINX CAN DRIVER
-M:	Appana Durga Kedareswara rao <[email protected]>
+M:	Harini T <[email protected]>
  L:	[email protected]
  S:	Maintained
  F:	Documentation/devicetree/bindings/net/can/xilinx,can.yaml

Regards,
Kedar

author maintainer
#5 lore raw

PATCH 2/2 dt-bindings: can: xilinx_can: Document phys property

In reply to Harini T

The Xilinx CAN and CANFD controllers can be connected to an external CAN transceiver on the board. That connection is described with the standard "phys" property on the controller node, pointing to a CAN transceiver PHY node which models the transceiver and its control lines (for example the standby/enable signals).

Describe the optional "phys" property (a single transceiver PHY) so the on-board CAN transceiver can be described in the device tree.

---
 Documentation/devicetree/bindings/net/can/xilinx,can.yaml | 3 +++
 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/net/can/xilinx,can.yaml +3 -0
index e705c719f7b5..18015e60fd6d 100644
@@ -53,6 +53,9 @@ properties:
     $ref: /schemas/types.yaml#/definitions/flag
     description: CAN TX_OL, TX_TL and RX FIFOs have ECC support(AXI CAN)
 
+  phys:
+    maxItems: 1
+
 required:
   - compatible
   - reg
Signature · 1 line
2.34.1
Acked-by on v1 2/2
#6 lore raw

Re: [PATCH 2/2] dt-bindings: can: xilinx_can: Document phys property

Quoted 6 lines · Harini T

The Xilinx CAN and CANFD controllers can be connected to an external CAN transceiver on the board. That connection is described with the standard "phys" property on the controller node, pointing to a CAN transceiver PHY node which models the transceiver and its control lines (for example the standby/enable signals).

Quoted 7 lines

Describe the optional "phys" property (a single transceiver PHY) so the on-board CAN transceiver can be described in the device tree.

---
 Documentation/devicetree/bindings/net/can/xilinx,can.yaml | 3 +++
 1 file changed, 3 insertions(+)

Best regards,
Krzysztof