running custom apps under uboot
Hi,
We had a similar problem some time ago (see https://sourceforge.net/mailarchive/forum.php?thread_id=3802343&forum_id=12898 ).. and thanks to those answers we succeeded in making hello_world work.
We changed the U-boot/examples/makefile file like this:
ifeq ($(ARCH),arm)
LOAD_ADDR = 0x40000
endif
Because, by default, the load address was 0xc100000, and in our platform there was no memory at this location. We got the hello_world.bin and burnt it in Flash (in 0x00040000) using JFlash. Then only type:
go 40000 Hello World!!
We have a PXA250 based platform, you'll have to do something similar with your arquitecture..
Hope this helps!!
Best regards
Sonia
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20040224/0f8d0002/attachment.htm
Quoted 6 lines · In message <[email protected]> you wrote:
Because, by default, the load address was
0xc100000, and in our platform there was no memory at this location. We got the hello_world.bin and burnt it in Flash (in0x00040000) using JFlash. Then only type:go 40000 Hello World!!
Note that this may result in "strange" behaviour, as the data and bss segments are not writable when the image is stored in flash (or other read-only) memory. Anything beyond the trivial hello world program will most likely fail.
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de CAUTION: The Mass of This Product Contains the Energy Equivalent of 85 Million Tons of TNT per Net Ounce of Weight.