Skip to contentSkip to conversation

Linux 2.6.6 appears to be 3 to 4 times slower than 2.6.5.

DISCUSSION Justin Piszcz 2 participants 2 messages May 17, 2004 – May 19, 2004

lore
Share & tools
lore
#0 lore raw

Sorry to all, it turns out (in two separate cases I had two different problems that affected the results).

Case 1: No SMP turned on for CPU w/HT after fix (~4.78 seconds compile time (2.6GHZ w/HT))
Case 2: Box had 4GB of NON-ECC memory in it, only recognized 2.56GB, took out (2) 1GB DDR DIMM's, and the speed returned what it should be. (~4.3 seconds compile time (3.0GHZ w/HT))

The control box was a 2.53GHZ (533MHZ BUS w/NO HT) = ~5.3seconds

I have not tested 2.6.6 recently, but in one of my tests I believe it worked OK, ever since 2.6.6 removed my /etc/lilo.conf and /etc/mtab and several other files, I do not wish to touch that kernel with a 10 foot poll :-P due to the IDE disk flush/cache issue.

Quoted 11 lines

From: Duncan Sands <[email protected]>
To: [email protected], "Justin Piszcz" <[email protected]>
CC: [email protected]
Subject: Re: Linux 2.6.6 appears to be 3 to 4 times slower than 2.6.5.
Date: Mon, 17 May 2004 10:07:17 +0200

Quoted 4 lines

I noted that my epson C82 usb printer was running about 25% of its normal speed last night, it took gimp-print several hours to do half a dozen 8x10's in 720dpi. gkrellm's display looks normal though, with setiathome currently taking 90+% of the cpu, which is normal.

Quoted 5 lines

2.6.6 or 2.6.6 plus patches from BK or -mm?

Thanks,

Duncan.

_________________________________________________________________
Best Restaurant Giveaway Ever! Vote for your favorites for a chance to win $1 million! http://local.msn.com/special/giveaway.asp

#1 lore raw
Quoted 9 lines · Justin Piszcz

Sorry to all, it turns out (in two separate cases I had two different problems that affected the results).

Case 1: No SMP turned on for CPU w/HT after fix (~4.78 seconds compile time (2.6GHZ w/HT))
Case 2: Box had 4GB of NON-ECC memory in it, only recognized 2.56GB, took out (2) 1GB DDR DIMM's, and the speed returned what it should be. (~4.3 seconds compile time (3.0GHZ w/HT))

Quoted 6 lines

The control box was a 2.53GHZ (533MHZ BUS w/NO HT) = ~5.3seconds

I have not tested 2.6.6 recently, but in one of my tests I believe it worked OK, ever since 2.6.6 removed my /etc/lilo.conf and /etc/mtab and several other files, I do not wish to touch that kernel with a 10 foot poll :-P due to the IDE disk flush/cache issue.

I told you this already: 2.6.6 IDE changes don't cause data corruption
- but fixes some instead (that's why there were merged so quickly!) so stop spreading FUD and see http://bugme.osdl.org/show_bug.cgi?id=2672.