Troubleshoot soundcard positions
Hi,
I consider myself as a power newbie, but I have a delicate question I considered best asked here.
I have two Pinnacle PCTV Pro tuner cards and I've also the mobo cmipci loaded along with the Live! Player, Slackware 10.0 running kernel 2.6.7, Alsa 1-0.5 mandatory for running tweo tuners at once.
My object was to pull out the two patch cables as to achieve better sound. What the first 2.6.x kernel i tried (I think it was 2.6.3) then came the snd-bt87x driver.
At that time my two tuners became dsp0 and dsp1, Live Player as dsp2 and the C-Media sound as dsp3. What a nightmare. That means, to this day with Slackware 10.0 proper, all sound daemons and apps saw my "first" tuner as the primary sound card. No use really. ;)
Slackware loads Alsa with a /etc/rc.d/rc.alsa which can in fact be omitted, the drivers loads anyway (hotplug?). I've tried different modprobe.conf settings but the boot process goes out of its way to make sure my tuners get in my way.
For the time being I've hand-removed the snd-bt87x.ko module so KDE apps will run again. I can also run xmms at once without messing /dev up bc the Live! Player stays _dsp0_ this way.
I've also looked into "index=" entries but the system doesn't react no matter what I try.
Sorry to come down this way but I was unable to come up with anything on the mplayer list... maybe I'm being lazy but hey, I've built my PVR with cron entries. Not too bad. :-)
Regards,
Roger Andreassen,
Norway
_________________________________________________________________
MSN Hotmail http://www.hotmail.com Med markedets beste SPAM-filter. Gratis!
-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com
Quoted 9 lines · Roger Andreassen
I have two Pinnacle PCTV Pro tuner cards and I've also the mobo cmipci loaded along with the Live! Player, Slackware 10.0 running kernel 2.6.7, Alsa 1-0.5 mandatory for running tweo tuners at once.
At that time my two tuners became dsp0 and dsp1, Live Player as dsp2 and the C-Media sound as dsp3. What a nightmare.
...
I've also looked into "index=" entries but the system doesn't react no matter what I try.
The following entries in /etc/modprobe.conf should work:
options snd-emu10k1 index=0
options snd-cmipci index=1
options snd-bt87x index=2,3
HTH
Clemens
-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285