Skip to contentSkip to conversation

mem: Command line option to delete hugepage backing files

PATCH New shesha Sreenivasamurthy (shesha) 2 participants 6 messages Oct 14, 2015 – Oct 21, 2015 2 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

PATCH 1/1 mem: Command line option to delete hugepage backing files

---

lib/librte_eal/common/eal_common_options.c | 12 ++++++++++
lib/librte_eal/common/eal_internal_cfg.h   |  1 +
lib/librte_eal/common/eal_options.h        |  2 ++
lib/librte_eal/linuxapp/eal/eal_memory.c   | 37 ++++++++++++++++++++++++++++++
4 files changed, 52 insertions(+)
lib/librte_eal/common/eal_common_options.c +0 -0
index 1f459ac..5fe6374 100644
@@ -79,6 +79,7 @@ eal_long_options[] = {
{OPT_MASTER_LCORE,      1, NULL, OPT_MASTER_LCORE_NUM     },
{OPT_NO_HPET,           0, NULL, OPT_NO_HPET_NUM          },
{OPT_NO_HUGE,           0, NULL, OPT_NO_HUGE_NUM          },
+ {OPT_HUGE_UNLINK,       0, NULL, OPT_HUGE_UNLINK_NUM      },
{OPT_NO_PCI,            0, NULL, OPT_NO_PCI_NUM           },
{OPT_NO_SHCONF,         0, NULL, OPT_NO_SHCONF_NUM        },
{OPT_PCI_BLACKLIST,     1, NULL, OPT_PCI_BLACKLIST_NUM    },

@@ -722,6 +723,10 @@ eal_parse_common_option(int opt, const char *optarg, conf->no_hugetlbfs = 1;
break;
+ case OPT_HUGE_UNLINK_NUM:
+ conf->hugepage_unlink = 1;
+ break;
+
case OPT_NO_PCI_NUM:
conf->no_pci = 1;
break;
@@ -856,6 +861,12 @@ eal_check_common_options(struct internal_config *internal_cfg) return -1;
}
+ if (internal_cfg->no_hugetlbfs && internal_cfg->hugepage_unlink) {
+ RTE_LOG(ERR, EAL, "Option --"OPT_HUGE_UNLINK" cannot "
+ "be specified together with --"OPT_NO_HUGE"\n");
+ return -1;
+ }
+
if (rte_eal_devargs_type_count(RTE_DEVTYPE_WHITELISTED_PCI) != 0 && rte_eal_devargs_type_count(RTE_DEVTYPE_BLACKLISTED_PCI) != 0) { RTE_LOG(ERR, EAL, "Options blacklist (-b) and whitelist (-w) "
@@ -906,6 +917,7 @@ eal_common_usage(void)
" -h, --help This help\n"
"\nEAL options for DEBUG use only:\n"
" --"OPT_NO_HUGE" Use malloc instead of hugetlbfs\n"
+ " --"OPT_HUGE_UNLINK" Unlink hugepage backing file after initalization\n"

       "  --"OPT_NO_PCI"            Disable PCI\n"
       "  --"OPT_NO_HPET"           Disable HPET\n"
       "  --"OPT_NO_SHCONF"         No shared config (mmap'd files)\n"
lib/librte_eal/common/eal_internal_cfg.h +0 -0
index e2ecb0d..84b075f 100644
@@ -64,6 +64,7 @@ struct internal_config {

volatile unsigned force_nchannel; /**< force number of channels */
volatile unsigned force_nrank; /**< force number of ranks */
volatile unsigned no_hugetlbfs; /**< true to disable hugetlbfs */
+ volatile unsigned hugepage_unlink; /** < true to unlink backing files */ volatile unsigned xen_dom0_support; /**< support app running on Xen Dom0*/
volatile unsigned no_pci; /**< true to disable PCI */
volatile unsigned no_hpet; /**< true to disable HPET */

lib/librte_eal/common/eal_options.h +0 -0
index f6714d9..745f38c 100644
@@ -63,6 +63,8 @@ enum {

OPT_PROC_TYPE_NUM,
#define OPT_NO_HPET "no-hpet"
OPT_NO_HPET_NUM,
+#define OPT_HUGE_UNLINK "huge-unlink"
+ OPT_HUGE_UNLINK_NUM,
#define OPT_NO_HUGE "no-huge"
OPT_NO_HUGE_NUM,
#define OPT_NO_PCI "no-pci"

lib/librte_eal/linuxapp/eal/eal_memory.c +0 -0
index ac2745e..016cac6 100644
@@ -786,6 +786,37 @@ copy_hugepages_to_shared_mem(struct hugepage_file * dst, int dest_size,

return 0;
}
+static int
+unlink_hugepage_bkup_files(struct hugepage_file *hugepg_tbl,
+ struct hugepage_info *hpi,
+ unsigned num_hp_info)
+{
+ unsigned socket, size;
+ int page, nrpages = 0;
+
+ /* get total number of hugepages */
+ for (size = 0; size < num_hp_info; size++)
+ for (socket = 0; socket < RTE_MAX_NUMA_NODES; socket++)
+ nrpages += internal_config.hugepage_info[size].num_pages[socket];
+
+ for (size = 0; size < num_hp_info; size++) {
+ for (socket = 0; socket < RTE_MAX_NUMA_NODES; socket++) {
+ for (page = 0; page < nrpages; page++) {
+ struct hugepage_file *hp = &hugepg_tbl[page];
+ if ((hp->size == hpi[size].hugepage_sz) &&
+ (hp->socket_id == (int) socket) &&
+ hp->final_va != NULL) {
+ if (unlink(hp->filepath)) {
+ RTE_LOG(WARNING, EAL, "%s(): Removing %s failed: %s\n",
+ __func__, hp->filepath, strerror(errno));
+ }
+ }
+ } /* foreach page */
+ } /* foreach socket */
+ } /* foreach pagesize */
+ return 0;
+}
+
/*
* unmaps hugepages that are not going to be used. since we originally allocate
* ALL hugepages (not just those we need), additional unmapping needs to be done.
@@ -1290,6 +1321,12 @@ rte_eal_hugepage_init(void)
}
/* free the temporary hugepage table */
+ if (internal_config.hugepage_unlink &&
+ unlink_hugepage_bkup_files(tmp_hp, used_hp,
+ internal_config.num_hugepage_sizes) < 0) {
+ RTE_LOG(ERR, EAL, "Unlinking hugepage backing files failed!\n");
+ goto fail;
+ }
free(tmp_hp);
tmp_hp = NULL;
--
1.9.1

#2 lore raw

PATCH 1/1 mem: Command line option to delete hugepage backing files

In reply to a message not in the archive

When an application using huge-pages crash or exists, the hugetlbfs backing files are not cleaned up. This is a patch to clean those files. There are multi-process DPDK applications that may be benefited by those backing files. Therefore, I have made that configurable so that the application that does not need those backing files can remove them, thus not changing the current default behavior. The application itself can clean it up, however the rationale behind DPDK cleaning it up is, DPDK created it therefore, it is better it unlinks it.

---

lib/librte_eal/common/eal_common_options.c | 12 ++++++++++
lib/librte_eal/common/eal_internal_cfg.h   |  1 +
lib/librte_eal/common/eal_options.h        |  2 ++
lib/librte_eal/linuxapp/eal/eal_memory.c   | 37 ++++++++++++++++++++++++++++++
4 files changed, 52 insertions(+)
lib/librte_eal/common/eal_common_options.c +0 -0
index 1f459ac..5fe6374 100644
@@ -79,6 +79,7 @@ eal_long_options[] = {
{OPT_MASTER_LCORE,      1, NULL, OPT_MASTER_LCORE_NUM     },
{OPT_NO_HPET,           0, NULL, OPT_NO_HPET_NUM          },
{OPT_NO_HUGE,           0, NULL, OPT_NO_HUGE_NUM          },
+ {OPT_HUGE_UNLINK,       0, NULL, OPT_HUGE_UNLINK_NUM      },
{OPT_NO_PCI,            0, NULL, OPT_NO_PCI_NUM           },
{OPT_NO_SHCONF,         0, NULL, OPT_NO_SHCONF_NUM        },
{OPT_PCI_BLACKLIST,     1, NULL, OPT_PCI_BLACKLIST_NUM    },

@@ -722,6 +723,10 @@ eal_parse_common_option(int opt, const char *optarg, conf->no_hugetlbfs = 1;
break;
+ case OPT_HUGE_UNLINK_NUM:
+ conf->hugepage_unlink = 1;
+ break;
+
case OPT_NO_PCI_NUM:
conf->no_pci = 1;
break;
@@ -856,6 +861,12 @@ eal_check_common_options(struct internal_config *internal_cfg) return -1;
}
+ if (internal_cfg->no_hugetlbfs && internal_cfg->hugepage_unlink) {
+ RTE_LOG(ERR, EAL, "Option --"OPT_HUGE_UNLINK" cannot "
+ "be specified together with --"OPT_NO_HUGE"\n");
+ return -1;
+ }
+
if (rte_eal_devargs_type_count(RTE_DEVTYPE_WHITELISTED_PCI) != 0 && rte_eal_devargs_type_count(RTE_DEVTYPE_BLACKLISTED_PCI) != 0) { RTE_LOG(ERR, EAL, "Options blacklist (-b) and whitelist (-w) "
@@ -906,6 +917,7 @@ eal_common_usage(void)
" -h, --help This help\n"
"\nEAL options for DEBUG use only:\n"
" --"OPT_NO_HUGE" Use malloc instead of hugetlbfs\n"
+ " --"OPT_HUGE_UNLINK" Unlink hugepage backing file after initalization\n"

       "  --"OPT_NO_PCI"            Disable PCI\n"
       "  --"OPT_NO_HPET"           Disable HPET\n"
       "  --"OPT_NO_SHCONF"         No shared config (mmap'd files)\n"
lib/librte_eal/common/eal_internal_cfg.h +0 -0
index e2ecb0d..84b075f 100644
@@ -64,6 +64,7 @@ struct internal_config {

volatile unsigned force_nchannel; /**< force number of channels */
volatile unsigned force_nrank; /**< force number of ranks */
volatile unsigned no_hugetlbfs; /**< true to disable hugetlbfs */
+ volatile unsigned hugepage_unlink; /** < true to unlink backing files */ volatile unsigned xen_dom0_support; /**< support app running on Xen Dom0*/
volatile unsigned no_pci; /**< true to disable PCI */
volatile unsigned no_hpet; /**< true to disable HPET */

lib/librte_eal/common/eal_options.h +0 -0
index f6714d9..745f38c 100644
@@ -63,6 +63,8 @@ enum {

OPT_PROC_TYPE_NUM,
#define OPT_NO_HPET "no-hpet"
OPT_NO_HPET_NUM,
+#define OPT_HUGE_UNLINK "huge-unlink"
+ OPT_HUGE_UNLINK_NUM,
#define OPT_NO_HUGE "no-huge"
OPT_NO_HUGE_NUM,
#define OPT_NO_PCI "no-pci"

lib/librte_eal/linuxapp/eal/eal_memory.c +0 -0
index ac2745e..016cac6 100644
@@ -786,6 +786,37 @@ copy_hugepages_to_shared_mem(struct hugepage_file * dst, int dest_size,

return 0;
}
+static int
+unlink_hugepage_bkup_files(struct hugepage_file *hugepg_tbl,
+ struct hugepage_info *hpi,
+ unsigned num_hp_info)
+{
+ unsigned socket, size;
+ int page, nrpages = 0;
+
+ /* get total number of hugepages */
+ for (size = 0; size < num_hp_info; size++)
+ for (socket = 0; socket < RTE_MAX_NUMA_NODES; socket++)
+ nrpages += internal_config.hugepage_info[size].num_pages[socket];
+
+ for (size = 0; size < num_hp_info; size++) {
+ for (socket = 0; socket < RTE_MAX_NUMA_NODES; socket++) {
+ for (page = 0; page < nrpages; page++) {
+ struct hugepage_file *hp = &hugepg_tbl[page];
+ if ((hp->size == hpi[size].hugepage_sz) &&
+ (hp->socket_id == (int) socket) &&
+ hp->final_va != NULL) {
+ if (unlink(hp->filepath)) {
+ RTE_LOG(WARNING, EAL, "%s(): Removing %s failed: %s\n",
+ __func__, hp->filepath, strerror(errno));
+ }
+ }
+ } /* foreach page */
+ } /* foreach socket */
+ } /* foreach pagesize */
+ return 0;
+}
+
/*
* unmaps hugepages that are not going to be used. since we originally allocate
* ALL hugepages (not just those we need), additional unmapping needs to be done.
@@ -1290,6 +1321,12 @@ rte_eal_hugepage_init(void)
}
/* free the temporary hugepage table */
+ if (internal_config.hugepage_unlink &&
+ unlink_hugepage_bkup_files(tmp_hp, used_hp,
+ internal_config.num_hugepage_sizes) < 0) {
+ RTE_LOG(ERR, EAL, "Unlinking hugepage backing files failed!\n");
+ goto fail;
+ }
free(tmp_hp);
tmp_hp = NULL;
--
1.9.1

#3 lore raw

Hi Shesha,

A few format comments:
- Spacing/tabbing is all wrong for some reason, need to be fixed.
- Signed-off is missing, see 'Contribute by sending patches' in http://dpdk.org/dev.
- No capital letters in the commit title - there is a patch submitted with more detailed info regarding patch format, etc - http://dpdk.org/dev/patchwork/patch/7762/

Quoted 81 lines · shesha Sreenivasamurthy (shesha)

When an application using huge-pages crash or exists, the hugetlbfs backing files are not cleaned up. This is a patch to clean those files. There are multi-process DPDK applications that may be benefited by those backing files. Therefore, I have made that configurable so that the application that does not need those backing files can remove them, thus not changing the current default behavior. The application itself can clean it up, however the rationale behind DPDK cleaning it up is, DPDK created it therefore, it is better it unlinks it.

---

lib/librte_eal/common/eal_common_options.c | 12 ++++++++++
lib/librte_eal/common/eal_internal_cfg.h   |  1 +
lib/librte_eal/common/eal_options.h        |  2 ++
lib/librte_eal/linuxapp/eal/eal_memory.c   | 37 ++++++++++++++++++++++++++++++
4 files changed, 52 insertions(+)
lib/librte_eal/common/eal_common_options.c +5 -0
index 1f459ac..5fe6374 100644
@@ -79,6 +79,7 @@ eal_long_options[] = {
 {OPT_MASTER_LCORE,      1, NULL, OPT_MASTER_LCORE_NUM     },
 {OPT_NO_HPET,           0, NULL, OPT_NO_HPET_NUM          },
 {OPT_NO_HUGE,           0, NULL, OPT_NO_HUGE_NUM          },
+ {OPT_HUGE_UNLINK,       0, NULL, OPT_HUGE_UNLINK_NUM      },
 {OPT_NO_PCI,            0, NULL, OPT_NO_PCI_NUM           },
 {OPT_NO_SHCONF,         0, NULL, OPT_NO_SHCONF_NUM        },
 {OPT_PCI_BLACKLIST,     1, NULL, OPT_PCI_BLACKLIST_NUM    },
@@ -722,6 +723,10 @@ eal_parse_common_option(int opt, const char *optarg,
 conf->no_hugetlbfs = 1;
 break;
+ case OPT_HUGE_UNLINK_NUM:
+ conf->hugepage_unlink = 1;
+ break;
+

case OPT_NO_PCI_NUM:
conf->no_pci = 1;
break;

lib/librte_eal/common/eal_common_options.c +6 -0
@@ -856,6 +861,12 @@ eal_check_common_options(struct internal_config *internal_cfg)
 return -1;
 }
+ if (internal_cfg->no_hugetlbfs && internal_cfg->hugepage_unlink) {
+ RTE_LOG(ERR, EAL, "Option --"OPT_HUGE_UNLINK" cannot "
+ "be specified together with --"OPT_NO_HUGE"\n");
+ return -1;
+ }
+

if (rte_eal_devargs_type_count(RTE_DEVTYPE_WHITELISTED_PCI) != 0 && rte_eal_devargs_type_count(RTE_DEVTYPE_BLACKLISTED_PCI) != 0) { RTE_LOG(ERR, EAL, "Options blacklist (-b) and whitelist (-w) "

lib/librte_eal/common/eal_common_options.c +1 -0
@@ -906,6 +917,7 @@ eal_common_usage(void)
        "  -h, --help          This help\n"
        "\nEAL options for DEBUG use only:\n"
        "  --"OPT_NO_HUGE"           Use malloc instead of hugetlbfs\n"
+        "  --"OPT_HUGE_UNLINK"       Unlink hugepage backing file after initalization\n"
        "  --"OPT_NO_PCI"            Disable PCI\n"
        "  --"OPT_NO_HPET"           Disable HPET\n"
        "  --"OPT_NO_SHCONF"         No shared config (mmap'd files)\n"
lib/librte_eal/common/eal_internal_cfg.h +0 -0
index e2ecb0d..84b075f 100644
@@ -64,6 +64,7 @@ struct internal_config {

volatile unsigned force_nchannel; /**< force number of channels */
volatile unsigned force_nrank; /**< force number of ranks */
volatile unsigned no_hugetlbfs; /**< true to disable hugetlbfs */
+ volatile unsigned hugepage_unlink; /** < true to unlink backing files */ volatile unsigned xen_dom0_support; /**< support app running on Xen Dom0*/
volatile unsigned no_pci; /**< true to disable PCI */
volatile unsigned no_hpet; /**< true to disable HPET */

lib/librte_eal/common/eal_options.h +2 -0
index f6714d9..745f38c 100644
@@ -63,6 +63,8 @@ enum {
 OPT_PROC_TYPE_NUM,
 #define OPT_NO_HPET           "no-hpet"
 OPT_NO_HPET_NUM,
+#define OPT_HUGE_UNLINK        "huge-unlink"
+ OPT_HUGE_UNLINK_NUM,
 #define OPT_NO_HUGE           "no-huge"
 OPT_NO_HUGE_NUM,
 #define OPT_NO_PCI            "no-pci"
lib/librte_eal/linuxapp/eal/eal_memory.c +0 -0
index ac2745e..016cac6 100644

lib/librte_eal/linuxapp/eal/eal_memory.c copy_hugepages_to_shared_mem(struct hugepage_file * dst, int dest_size, · line 789

Quoted 4 lines
lib/librte_eal/linuxapp/eal/eal_memory.c +2 -0
@@ -786,6 +786,37 @@ copy_hugepages_to_shared_mem(struct hugepage_file * dst, int dest_size,
 return 0;
 }
+static int
+unlink_hugepage_bkup_files(struct hugepage_file *hugepg_tbl,

Just a nit, maybe just call this function unlink_hugepage_files

Sergio

Quoted 47 lines
lib/librte_eal/linuxapp/eal/eal_memory.c +35 -1
+ struct hugepage_info *hpi,
+ unsigned num_hp_info)
+{
+ unsigned socket, size;
+ int page, nrpages = 0;
+
+ /* get total number of hugepages */
+ for (size = 0; size < num_hp_info; size++)
+ for (socket = 0; socket < RTE_MAX_NUMA_NODES; socket++)
+ nrpages += internal_config.hugepage_info[size].num_pages[socket];
+
+ for (size = 0; size < num_hp_info; size++) {
+ for (socket = 0; socket < RTE_MAX_NUMA_NODES; socket++) {
+ for (page = 0; page < nrpages; page++) {
+ struct hugepage_file *hp = &hugepg_tbl[page];
+ if ((hp->size == hpi[size].hugepage_sz) &&
+ (hp->socket_id == (int) socket) &&
+                        hp->final_va != NULL) {
+                    if (unlink(hp->filepath)) {
+                        RTE_LOG(WARNING, EAL, "%s(): Removing %s failed: %s\n",
+                                __func__, hp->filepath, strerror(errno));
+                    }
+                }
+ } /* foreach page */
+ } /* foreach socket */
+ } /* foreach pagesize */
+ return 0;
+}
+
 /*
   * unmaps hugepages that are not going to be used. since we originally allocate
   * ALL hugepages (not just those we need), additional unmapping needs to be done.
@@ -1290,6 +1321,12 @@ rte_eal_hugepage_init(void)
 }
 /* free the temporary hugepage table */
+ if (internal_config.hugepage_unlink &&
+        unlink_hugepage_bkup_files(tmp_hp, used_hp,
+ internal_config.num_hugepage_sizes) < 0) {
+ RTE_LOG(ERR, EAL, "Unlinking hugepage backing files failed!\n");
+ goto fail;
+ }
 free(tmp_hp);
 tmp_hp = NULL;
--

1.9.1

A message that is not in the archive (sent off-list or not yet received): [email protected]

#5 lore raw

PATCH v2 1/1 mem: command line option to delete hugepage backing files

When an application using huge-pages crash or exists, the hugetlbfs backing files are not cleaned up. This is a patch to clean those files. There are multi-process DPDK applications that may be benefited by those backing files. Therefore, I have made that configurable so that the application that does not need those backing files can remove them, thus not changing the current default behavior. The application itself can clean it up, however the rationale behind DPDK cleaning it up is, DPDK created it and therefore, it is better it unlinks it.

---

lib/librte_eal/common/eal_common_options.c | 12 +++++++++
lib/librte_eal/common/eal_internal_cfg.h   |  1 +
lib/librte_eal/common/eal_options.h        |  2 ++
lib/librte_eal/linuxapp/eal/eal_memory.c   | 39 ++++++++++++++++++++++++++++++
4 files changed, 54 insertions(+)
lib/librte_eal/common/eal_common_options.c +0 -0
index 1f459ac..5fe6374 100644
@@ -79,6 +79,7 @@ eal_long_options[] = {
{OPT_MASTER_LCORE,      1, NULL, OPT_MASTER_LCORE_NUM     },
{OPT_NO_HPET,           0, NULL, OPT_NO_HPET_NUM          },
{OPT_NO_HUGE,           0, NULL, OPT_NO_HUGE_NUM          },
+ {OPT_HUGE_UNLINK,       0, NULL, OPT_HUGE_UNLINK_NUM      },
{OPT_NO_PCI,            0, NULL, OPT_NO_PCI_NUM           },
{OPT_NO_SHCONF,         0, NULL, OPT_NO_SHCONF_NUM        },
{OPT_PCI_BLACKLIST,     1, NULL, OPT_PCI_BLACKLIST_NUM    },

@@ -722,6 +723,10 @@ eal_parse_common_option(int opt, const char *optarg, conf->no_hugetlbfs = 1;
break;
+ case OPT_HUGE_UNLINK_NUM:
+ conf->hugepage_unlink = 1;
+ break;
+
case OPT_NO_PCI_NUM:
conf->no_pci = 1;
break;
@@ -856,6 +861,12 @@ eal_check_common_options(struct internal_config *internal_cfg) return -1;
}
+ if (internal_cfg->no_hugetlbfs && internal_cfg->hugepage_unlink) {
+ RTE_LOG(ERR, EAL, "Option --"OPT_HUGE_UNLINK" cannot "
+ "be specified together with --"OPT_NO_HUGE"\n");
+ return -1;
+ }
+
if (rte_eal_devargs_type_count(RTE_DEVTYPE_WHITELISTED_PCI) != 0 && rte_eal_devargs_type_count(RTE_DEVTYPE_BLACKLISTED_PCI) != 0) { RTE_LOG(ERR, EAL, "Options blacklist (-b) and whitelist (-w) "
@@ -906,6 +917,7 @@ eal_common_usage(void)
" -h, --help This help\n"
"\nEAL options for DEBUG use only:\n"
" --"OPT_NO_HUGE" Use malloc instead of hugetlbfs\n"
+ " --"OPT_HUGE_UNLINK" Unlink hugepage backing file after initalization\n"

       "  --"OPT_NO_PCI"            Disable PCI\n"
       "  --"OPT_NO_HPET"           Disable HPET\n"
       "  --"OPT_NO_SHCONF"         No shared config (mmap'd files)\n"
lib/librte_eal/common/eal_internal_cfg.h +0 -0
index e2ecb0d..84b075f 100644
@@ -64,6 +64,7 @@ struct internal_config {

volatile unsigned force_nchannel; /**< force number of channels */
volatile unsigned force_nrank; /**< force number of ranks */
volatile unsigned no_hugetlbfs; /**< true to disable hugetlbfs */
+ volatile unsigned hugepage_unlink; /** < true to unlink backing files */ volatile unsigned xen_dom0_support; /**< support app running on Xen Dom0*/
volatile unsigned no_pci; /**< true to disable PCI */
volatile unsigned no_hpet; /**< true to disable HPET */

lib/librte_eal/common/eal_options.h +0 -0
index f6714d9..745f38c 100644
@@ -63,6 +63,8 @@ enum {

OPT_PROC_TYPE_NUM,
#define OPT_NO_HPET "no-hpet"
OPT_NO_HPET_NUM,
+#define OPT_HUGE_UNLINK "huge-unlink"
+ OPT_HUGE_UNLINK_NUM,
#define OPT_NO_HUGE "no-huge"
OPT_NO_HUGE_NUM,
#define OPT_NO_PCI "no-pci"

lib/librte_eal/linuxapp/eal/eal_memory.c +0 -0
index ac2745e..2b86428 100644
@@ -786,6 +786,37 @@ copy_hugepages_to_shared_mem(struct hugepage_file * dst, int dest_size,

return 0;
}
+static int
+unlink_hugepage_files(struct hugepage_file *hugepg_tbl,
+ struct hugepage_info *hpi,
+ unsigned num_hp_info)
+{
+ unsigned socket, size;
+ int page, nrpages = 0;
+
+ /* get total number of hugepages */
+ for (size = 0; size < num_hp_info; size++)
+ for (socket = 0; socket < RTE_MAX_NUMA_NODES; socket++)
+ nrpages += internal_config.hugepage_info[size].num_pages[socket];
+
+ for (size = 0; size < num_hp_info; size++) {
+ for (socket = 0; socket < RTE_MAX_NUMA_NODES; socket++) {
+ for (page = 0; page < nrpages; page++) {
+ struct hugepage_file *hp = &hugepg_tbl[page];
+ if ((hp->size == hpi[size].hugepage_sz) &&
+ (hp->socket_id == (int) socket) &&
+ hp->final_va != NULL) {
+ if (unlink(hp->filepath)) {
+ RTE_LOG(WARNING, EAL, "%s(): Removing %s failed: %s\n",
+ __func__, hp->filepath, strerror(errno));
+ }
+ }
+ } /* foreach page */
+ } /* foreach socket */
+ } /* foreach pagesize */
+ return 0;
+}
+
/*
* unmaps hugepages that are not going to be used. since we originally allocate
* ALL hugepages (not just those we need), additional unmapping needs to be done.
@@ -1289,6 +1320,14 @@ rte_eal_hugepage_init(void)
goto fail;
}
+ /* free the hugepage backing files */
+ if (internal_config.hugepage_unlink &&
+ unlink_hugepage_files(tmp_hp, used_hp,
+ internal_config.num_hugepage_sizes) < 0) {
+ RTE_LOG(ERR, EAL, "Unlinking hugepage backing files failed!\n");
+ goto fail;
+ }
+
/* free the temporary hugepage table */
free(tmp_hp);
tmp_hp = NULL;
--
1.9.1

#6 lore raw

PATCH v2 1/1 mem: command line option to delete hugepage backing files

In reply to a message not in the archive

When an application using huge-pages crash or exists, the hugetlbfs backing files are not cleaned up. This is a patch to clean those files. There are multi-process DPDK applications that may be benefited by those backing files. Therefore, I have made that configurable so that the application that does not need those backing files can remove them, thus not changing the current default behavior. The application itself can clean it up, however the rationale behind DPDK cleaning it up is, DPDK created it and therefore, it is better it unlinks it.

---
 lib/librte_eal/common/eal_common_options.c | 12 +++++++++
 lib/librte_eal/common/eal_internal_cfg.h   |  1 +
 lib/librte_eal/common/eal_options.h        |  2 ++
 lib/librte_eal/linuxapp/eal/eal_memory.c   | 39
++++++++++++++++++++++++++++++
 4 files changed, 54 insertions(+)
(quoted diff) +0 -0

b/lib/librte_eal/common/eal_common_options.c
index 1f459ac..5fe6374 100644

lib/librte_eal/common/eal_common_options.c +5 -0
@@ -79,6 +79,7 @@ eal_long_options[] = {
 	{OPT_MASTER_LCORE,      1, NULL, OPT_MASTER_LCORE_NUM     },
 	{OPT_NO_HPET,           0, NULL, OPT_NO_HPET_NUM          },
 	{OPT_NO_HUGE,           0, NULL, OPT_NO_HUGE_NUM          },
+	{OPT_HUGE_UNLINK,       0, NULL, OPT_HUGE_UNLINK_NUM      },
 	{OPT_NO_PCI,            0, NULL, OPT_NO_PCI_NUM           },
 	{OPT_NO_SHCONF,         0, NULL, OPT_NO_SHCONF_NUM        },
 	{OPT_PCI_BLACKLIST,     1, NULL, OPT_PCI_BLACKLIST_NUM    },
@@ -722,6 +723,10 @@ eal_parse_common_option(int opt, const char *optarg,
 		conf->no_hugetlbfs = 1;
 		break;
 
+	case OPT_HUGE_UNLINK_NUM:
+		conf->hugepage_unlink = 1;
+		break;
+
 	case OPT_NO_PCI_NUM:
 		conf->no_pci = 1;
 		break;
@@ -856,6 +861,12 @@ eal_check_common_options(struct internal_config

*internal_cfg)
return -1;
}

+ if (internal_cfg->no_hugetlbfs && internal_cfg->hugepage_unlink) {
+ RTE_LOG(ERR, EAL, "Option --"OPT_HUGE_UNLINK" cannot "
+ "be specified together with --"OPT_NO_HUGE"\n");
+ return -1;
+ }
+
if (rte_eal_devargs_type_count(RTE_DEVTYPE_WHITELISTED_PCI) != 0 &&
rte_eal_devargs_type_count(RTE_DEVTYPE_BLACKLISTED_PCI) != 0) { RTE_LOG(ERR, EAL, "Options blacklist (-b) and whitelist (-w) "
@@ -906,6 +917,7 @@ eal_common_usage(void)
" -h, --help This help\n"
"\nEAL options for DEBUG use only:\n"

 	       "  --"OPT_NO_HUGE"           Use malloc instead of hugetlbfs\n"
+	       "  --"OPT_HUGE_UNLINK"       Unlink hugepage backing file after
initalization\n"
 	       "  --"OPT_NO_PCI"            Disable PCI\n"
 	       "  --"OPT_NO_HPET"           Disable HPET\n"
 	       "  --"OPT_NO_SHCONF"         No shared config (mmap'd files)\n"
(quoted diff) +0 -0

b/lib/librte_eal/common/eal_internal_cfg.h
index e2ecb0d..84b075f 100644

lib/librte_eal/common/eal_internal_cfg.h +1 -0
@@ -64,6 +64,7 @@ struct internal_config {
 	volatile unsigned force_nchannel; /**< force number of channels */
 	volatile unsigned force_nrank;    /**< force number of ranks */
 	volatile unsigned no_hugetlbfs;   /**< true to disable hugetlbfs */
+	volatile unsigned hugepage_unlink; /** < true to unlink backing files */
 	volatile unsigned xen_dom0_support; /**< support app running on Xen

Dom0*/
volatile unsigned no_pci; /**< true to disable PCI */
volatile unsigned no_hpet; /**< true to disable HPET */

(quoted diff) +0 -0

b/lib/librte_eal/common/eal_options.h
index f6714d9..745f38c 100644

lib/librte_eal/common/eal_options.h +2 -0
@@ -63,6 +63,8 @@ enum {
 	OPT_PROC_TYPE_NUM,
 #define OPT_NO_HPET           "no-hpet"
 	OPT_NO_HPET_NUM,
+#define OPT_HUGE_UNLINK        "huge-unlink"
+	OPT_HUGE_UNLINK_NUM,
 #define OPT_NO_HUGE           "no-huge"
 	OPT_NO_HUGE_NUM,
 #define OPT_NO_PCI            "no-pci"
(quoted diff) +0 -0

b/lib/librte_eal/linuxapp/eal/eal_memory.c
index ac2745e..2b86428 100644

lib/librte_eal/linuxapp/eal/eal_memory.c +0 -0
@@ -786,6 +786,37 @@ copy_hugepages_to_shared_mem(struct hugepage_file *

dst, int dest_size,
return 0;
}

+static int
+unlink_hugepage_files(struct hugepage_file *hugepg_tbl,
+ struct hugepage_info *hpi,
+ unsigned num_hp_info)
+{
+ unsigned socket, size;
+ int page, nrpages = 0;
+
+ /* get total number of hugepages */
+ for (size = 0; size < num_hp_info; size++)
+ for (socket = 0; socket < RTE_MAX_NUMA_NODES; socket++)
+ nrpages += internal_config.hugepage_info[size].num_pages[socket];
+
+ for (size = 0; size < num_hp_info; size++) {
+ for (socket = 0; socket < RTE_MAX_NUMA_NODES; socket++) {
+ for (page = 0; page < nrpages; page++) {
+ struct hugepage_file *hp = &hugepg_tbl[page];
+ if ((hp->size == hpi[size].hugepage_sz) &&
+ (hp->socket_id == (int) socket) &&
+ hp->final_va != NULL) {
+ if (unlink(hp->filepath)) {
+ RTE_LOG(WARNING, EAL, "%s(): Removing %s failed: %s\n",
+ __func__, hp->filepath, strerror(errno));
+ }
+ }
+ } /* foreach page */
+ } /* foreach socket */
+ } /* foreach pagesize */
+ return 0;
+}
+
/*
* unmaps hugepages that are not going to be used. since we originally
allocate
* ALL hugepages (not just those we need), additional unmapping needs to
be done.
@@ -1289,6 +1320,14 @@ rte_eal_hugepage_init(void)
goto fail;
}

+ /* free the hugepage backing files */
+ if (internal_config.hugepage_unlink &&
+ unlink_hugepage_files(tmp_hp, used_hp,
+ internal_config.num_hugepage_sizes) < 0) {
+ RTE_LOG(ERR, EAL, "Unlinking hugepage backing files failed!\n");
+ goto fail;
+ }
+
/* free the temporary hugepage table */
free(tmp_hp);
tmp_hp = NULL;

Signature · 1 line
1.9.1
#7 lore raw

Re: [PATCH v2] mem: command line option to delete hugepage backing files

Hi Shesha,

A few things:
- For some reason the patch didn't upload properly to patchwork and the last bit of the patch is missing. The following link shows that the patch fails basic testing/compilation:
http://dpdk.org/ml/archives/test-report/2015-October/000352.html
- You seem to be sending two copies of the same patch.
- Please update patchwork status for v1 patch. I think this is because there were two copies of it [patch id 7606]

Quoted 113 lines · shesha Sreenivasamurthy (shesha)

When an application using huge-pages crash or exists, the hugetlbfs backing files are not cleaned up. This is a patch to clean those files. There are multi-process DPDK applications that may be benefited by those backing files. Therefore, I have made that configurable so that the application that does not need those backing files can remove them, thus not changing the current default behavior. The application itself can clean it up, however the rationale behind DPDK cleaning it up is, DPDK created it and therefore, it is better it unlinks it.

---
  lib/librte_eal/common/eal_common_options.c | 12 +++++++++
  lib/librte_eal/common/eal_internal_cfg.h   |  1 +
  lib/librte_eal/common/eal_options.h        |  2 ++
  lib/librte_eal/linuxapp/eal/eal_memory.c   | 39
++++++++++++++++++++++++++++++
  4 files changed, 54 insertions(+)
lib/librte_eal/common/eal_common_options.c +11 -0
index 1f459ac..5fe6374 100644
@@ -79,6 +79,7 @@ eal_long_options[] = {
  	{OPT_MASTER_LCORE,      1, NULL, OPT_MASTER_LCORE_NUM     },
  	{OPT_NO_HPET,           0, NULL, OPT_NO_HPET_NUM          },
  	{OPT_NO_HUGE,           0, NULL, OPT_NO_HUGE_NUM          },
+	{OPT_HUGE_UNLINK,       0, NULL, OPT_HUGE_UNLINK_NUM      },
  	{OPT_NO_PCI,            0, NULL, OPT_NO_PCI_NUM           },
  	{OPT_NO_SHCONF,         0, NULL, OPT_NO_SHCONF_NUM        },
  	{OPT_PCI_BLACKLIST,     1, NULL, OPT_PCI_BLACKLIST_NUM    },
@@ -722,6 +723,10 @@ eal_parse_common_option(int opt, const char *optarg,
  		conf->no_hugetlbfs = 1;
  		break;
 
+	case OPT_HUGE_UNLINK_NUM:
+		conf->hugepage_unlink = 1;
+		break;
+
  	case OPT_NO_PCI_NUM:
  		conf->no_pci = 1;
  		break;
@@ -856,6 +861,12 @@ eal_check_common_options(struct internal_config
 *internal_cfg)
  		return -1;
  	}
 
+	if (internal_cfg->no_hugetlbfs && internal_cfg->hugepage_unlink) {
+		RTE_LOG(ERR, EAL, "Option --"OPT_HUGE_UNLINK" cannot "
+			"be specified together with --"OPT_NO_HUGE"\n");
+		return -1;
+	}
+
  	if (rte_eal_devargs_type_count(RTE_DEVTYPE_WHITELISTED_PCI) != 0 &&
  		rte_eal_devargs_type_count(RTE_DEVTYPE_BLACKLISTED_PCI) != 0) {

RTE_LOG(ERR, EAL, "Options blacklist (-b) and whitelist (-w) "

lib/librte_eal/common/eal_common_options.c +1 -0
@@ -906,6 +917,7 @@ eal_common_usage(void)
  	       "  -h, --help          This help\n"
  	       "\nEAL options for DEBUG use only:\n"
  	       "  --"OPT_NO_HUGE"           Use malloc instead of hugetlbfs\n"
+	       "  --"OPT_HUGE_UNLINK"       Unlink hugepage backing file after

initalization\n"

  	       "  --"OPT_NO_PCI"            Disable PCI\n"
  	       "  --"OPT_NO_HPET"           Disable HPET\n"
  	       "  --"OPT_NO_SHCONF"         No shared config (mmap'd files)\n"
lib/librte_eal/common/eal_internal_cfg.h +1 -0
index e2ecb0d..84b075f 100644
@@ -64,6 +64,7 @@ struct internal_config {
  	volatile unsigned force_nchannel; /**< force number of channels */
  	volatile unsigned force_nrank;    /**< force number of ranks */
  	volatile unsigned no_hugetlbfs;   /**< true to disable hugetlbfs */
+	volatile unsigned hugepage_unlink; /** < true to unlink backing files */
  	volatile unsigned xen_dom0_support; /**< support app running on Xen

Dom0*/
volatile unsigned no_pci; /**< true to disable PCI */
volatile unsigned no_hpet; /**< true to disable HPET */

lib/librte_eal/common/eal_options.h +2 -0
index f6714d9..745f38c 100644
@@ -63,6 +63,8 @@ enum {
  	OPT_PROC_TYPE_NUM,
  #define OPT_NO_HPET           "no-hpet"
  	OPT_NO_HPET_NUM,
+#define OPT_HUGE_UNLINK        "huge-unlink"
+	OPT_HUGE_UNLINK_NUM,
  #define OPT_NO_HUGE           "no-huge"
  	OPT_NO_HUGE_NUM,
  #define OPT_NO_PCI            "no-pci"
lib/librte_eal/linuxapp/eal/eal_memory.c +10 -0
index ac2745e..2b86428 100644
@@ -786,6 +786,37 @@ copy_hugepages_to_shared_mem(struct hugepage_file *
 dst, int dest_size,
  	return 0;
  }
 
+static int
+unlink_hugepage_files(struct hugepage_file *hugepg_tbl,
+		struct hugepage_info *hpi,
+		unsigned num_hp_info)
+{
+	unsigned socket, size;
+	int page, nrpages = 0;
+
+	/* get total number of hugepages */
+	for (size = 0; size < num_hp_info; size++)

lib/librte_eal/linuxapp/eal/eal_memory.c copy_hugepages_to_shared_mem(struct hugepage_file * · line 809

Quoted 10 lines
lib/librte_eal/linuxapp/eal/eal_memory.c +10 -0
+		for (socket = 0; socket < RTE_MAX_NUMA_NODES; socket++)
+			nrpages += internal_config.hugepage_info[size].num_pages[socket];
+
+	for (size = 0; size < num_hp_info; size++) {
+		for (socket = 0; socket < RTE_MAX_NUMA_NODES; socket++) {
+			for (page = 0; page < nrpages; page++) {
+				struct hugepage_file *hp = &hugepg_tbl[page];
+				if ((hp->size == hpi[size].hugepage_sz) &&
+						(hp->socket_id == (int) socket) &&
+						hp->final_va != NULL) {

Is all this necessary? At this point, all unneeded hugepages have been released and their final_va set to NULL.
I think we just need to calculate the total number of hugepages and loop through all hugepg_tbl entries checking va_final != NULL, then unlink.

Sergio

Quoted 31 lines
lib/librte_eal/linuxapp/eal/eal_memory.c +11 -0
+						if (unlink(hp->filepath)) {
+							RTE_LOG(WARNING, EAL, "%s(): Removing %s failed: %s\n",
+								__func__, hp->filepath, strerror(errno));
+					}
+				}
+			} /* foreach page */
+		} /* foreach socket */
+	} /* foreach pagesize */
+	return 0;
+}
+
  /*
   * unmaps hugepages that are not going to be used. since we originally

allocate
* ALL hugepages (not just those we need), additional unmapping needs to
be done.

lib/librte_eal/linuxapp/eal/eal_memory.c +8 -0
@@ -1289,6 +1320,14 @@ rte_eal_hugepage_init(void)
  		goto fail;
  	}
 
+	/* free the hugepage backing files */
+	if (internal_config.hugepage_unlink &&
+		unlink_hugepage_files(tmp_hp, used_hp,
+			internal_config.num_hugepage_sizes) < 0) {
+			RTE_LOG(ERR, EAL, "Unlinking hugepage backing files failed!\n");
+		goto fail;
+	}
+
  	/* free the temporary hugepage table */
  	free(tmp_hp);
  	tmp_hp = NULL;