Skip to contentSkip to conversation

No longer default to HW_RANDOM when UML_RANDOM is the trigger

PATCH In review Dragan Simic 3 participants 11 messages Jan 15, 2025 – Feb 9, 2025

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover No longer default to HW_RANDOM when UML_RANDOM is the trigger

This is a small patch series that makes the already existing HW_RANDOM_* options in the hw_random Kconfig selected by default only when the UML_RANDOM option isn't already selected. Having the HW_RANDOM_* options selected doesn't make much sense for user-mode Linux (UML), which obviously cannot make use of any HWRNG devices.

Along the way, some additional trivial cleanups of the hw_random Kconfig file are also performed as spotted, in separate patches.

Dragan Simic (3):
hwrng: Use tabs as leading whitespace consistently in Kconfig
hwrng: Move one "tristate" Kconfig description to the usual place
hwrng: Don't default to HW_RANDOM when UML_RANDOM is the trigger

 drivers/char/hw_random/Kconfig | 84 +++++++++++++++++-----------------
 1 file changed, 42 insertions(+), 42 deletions(-)
#1 lore raw

PATCH 1/3 hwrng: Use tabs as leading whitespace consistently in Kconfig

Replace instances of leading size-eight groups of space characters with the usual tab characters, as spotted in the hw_random Kconfig file.

No intended functional changes are introduced by this trivial cleanup.

---
 drivers/char/hw_random/Kconfig | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/char/hw_random/Kconfig +4 -4
index 17854f052386..e0244a66366b 100644
@@ -579,10 +579,10 @@ config HW_RANDOM_ARM_SMCCC_TRNG
 	  module will be called arm_smccc_trng.
 
 config HW_RANDOM_CN10K
-       tristate "Marvell CN10K Random Number Generator support"
-       depends on HW_RANDOM && PCI && (ARM64 || (64BIT && COMPILE_TEST))
-       default HW_RANDOM if ARCH_THUNDER
-       help
+	tristate "Marvell CN10K Random Number Generator support"
+	depends on HW_RANDOM && PCI && (ARM64 || (64BIT && COMPILE_TEST))
+	default HW_RANDOM if ARCH_THUNDER
+	help
 	 This driver provides support for the True Random Number
 	 generator available in Marvell CN10K SoCs.
 
#2 lore raw

PATCH 2/3 hwrng: Move one "tristate" Kconfig description to the usual place

In reply to Dragan Simic

It's pretty usual to have "tristate" descriptions in Kconfig files placed immediately after the actual configuration options, so correct the position of one misplaced "tristate" spotted in the hw_random Kconfig file.

No intended functional changes are introduced by this trivial cleanup.

---
 drivers/char/hw_random/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/char/hw_random/Kconfig +1 -1
index e0244a66366b..e84c7f431840 100644
@@ -534,10 +534,10 @@ config HW_RANDOM_NPCM
 	  If unsure, say Y.
 
 config HW_RANDOM_KEYSTONE
+	tristate "TI Keystone NETCP SA Hardware random number generator"
 	depends on ARCH_KEYSTONE || COMPILE_TEST
 	depends on HAS_IOMEM && OF
 	default HW_RANDOM
-	tristate "TI Keystone NETCP SA Hardware random number generator"
 	help
 	  This option enables Keystone's hardware random generator.
 
#3 lore raw

PATCH 3/3 hwrng: Don't default to HW_RANDOM when UML_RANDOM is the trigger

In reply to Dragan Simic

Since the commit 72d3e093afae (um: random: Register random as hwrng-core device), selecting the UML_RANDOM option may result in various HW_RANDOM_* options becoming selected as well, which doesn't make much sense for UML that obviously cannot use any of those HWRNG devices.

Let's have the HW_RANDOM_* options selected by default only when UML_RANDOM actually isn't already selected. With that in place, selecting UML_RANDOM no longer "triggers" the selection of various HW_RANDOM_* options.

Fixes 72d3e093afae (um: random: Register random as hwrng-core device)
---
 drivers/char/hw_random/Kconfig | 76 +++++++++++++++++-----------------
 1 file changed, 38 insertions(+), 38 deletions(-)
drivers/char/hw_random/Kconfig +38 -38
index e84c7f431840..283aba711af5 100644
@@ -38,47 +38,47 @@ config HW_RANDOM_TIMERIOMEM
 config HW_RANDOM_INTEL
 	tristate "Intel HW Random Number Generator support"
 	depends on (X86 || COMPILE_TEST) && PCI
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Intel i8xx-based motherboards.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called intel-rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_AMD
 	tristate "AMD HW Random Number Generator support"
 	depends on (X86 || COMPILE_TEST)
 	depends on PCI && HAS_IOPORT_MAP
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on AMD 76x-based motherboards.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called amd-rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_AIROHA
 	tristate "Airoha True HW Random Number Generator support"
 	depends on ARCH_AIROHA || COMPILE_TEST
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the True Random Number
 	  Generator hardware found on Airoha SoC.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called airoha-rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_ATMEL
 	tristate "Atmel Random Number Generator support"
 	depends on (ARCH_AT91 || COMPILE_TEST)
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Atmel AT91 devices.
@@ -102,139 +102,139 @@ config HW_RANDOM_BCM2835
 	tristate "Broadcom BCM2835/BCM63xx Random Number Generator support"
 	depends on ARCH_BCM2835 || ARCH_BCM_NSP || ARCH_BCM_5301X || \
 		   ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on the Broadcom BCM2835 and BCM63xx SoCs.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called bcm2835-rng
 
 	  If unsure, say Y.
 
 config HW_RANDOM_BCM74110
 	tristate "Broadcom BCM74110 Random Number Generator support"
 	depends on ARCH_BRCMSTB || COMPILE_TEST
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on the Broadcom BCM74110 SoCs.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called bcm74110-rng
 
 	  If unsure, say Y.
 
 config HW_RANDOM_IPROC_RNG200
 	tristate "Broadcom iProc/STB RNG200 support"
 	depends on ARCH_BCM_IPROC || ARCH_BCM2835 || ARCH_BCMBCA || ARCH_BRCMSTB || COMPILE_TEST
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the RNG200
 	  hardware found on the Broadcom iProc and STB SoCs.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called iproc-rng200
 
 	  If unsure, say Y.
 
 config HW_RANDOM_GEODE
 	tristate "AMD Geode HW Random Number Generator support"
 	depends on (X86_32 || COMPILE_TEST)
 	depends on PCI
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on the AMD Geode LX.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called geode-rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_N2RNG
 	tristate "Niagara2 Random Number Generator support"
 	depends on SPARC64
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Niagara2 cpus.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called n2-rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_VIA
 	tristate "VIA HW Random Number Generator support"
 	depends on X86
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on VIA based motherboards.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called via-rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_IXP4XX
 	tristate "Intel IXP4xx NPU HW Pseudo-Random Number Generator support"
 	depends on ARCH_IXP4XX || COMPILE_TEST
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Pseudo-Random
 	  Number Generator hardware found on the Intel IXP45x/46x NPU.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ixp4xx-rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_OMAP
 	tristate "OMAP Random Number Generator support"
 	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS || ARCH_MVEBU || ARCH_K3 || COMPILE_TEST
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on OMAP16xx, OMAP2/3/4/5, AM33xx/AM43xx
 	  multimedia processors, and Marvell Armada 7k/8k SoCs.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called omap-rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_OMAP3_ROM
 	tristate "OMAP3 ROM Random Number Generator support"
 	depends on ARCH_OMAP3 || COMPILE_TEST
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on OMAP34xx processors.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called omap3-rom-rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_OCTEON
 	tristate "Octeon Random Number Generator support"
 	depends on CAVIUM_OCTEON_SOC
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Octeon processors.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called octeon-rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_PASEMI
 	tristate "PA Semi HW Random Number Generator support"
 	depends on PPC_PASEMI || (PPC && COMPILE_TEST)
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on PA Semi PWRficient SoCs.
@@ -257,114 +257,114 @@ config HW_RANDOM_VIRTIO
 config HW_RANDOM_MXC_RNGA
 	tristate "Freescale i.MX RNGA Random Number Generator"
 	depends on SOC_IMX31 || COMPILE_TEST
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Freescale i.MX processors.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called mxc-rnga.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_IMX_RNGC
 	tristate "Freescale i.MX RNGC Random Number Generator"
 	depends on HAS_IOMEM
 	depends on SOC_IMX25 || SOC_IMX6SL || SOC_IMX6SLL || SOC_IMX6UL || COMPILE_TEST
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator Version C hardware found on some Freescale i.MX
 	  processors. Version B is also supported by this driver.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called imx-rngc.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_INGENIC_RNG
 	tristate "Ingenic Random Number Generator support"
 	depends on MACH_JZ4780 || MACH_X1000 || COMPILE_TEST
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number Generator
 	  hardware found in ingenic JZ4780 and X1000 SoC. MIPS Creator CI20 uses
 	  JZ4780 SoC, YSH & ATIL CU1000-Neo uses X1000 SoC.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ingenic-rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_INGENIC_TRNG
 	tristate "Ingenic True Random Number Generator support"
 	depends on MACH_X1830 || COMPILE_TEST
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the True Random Number Generator
 	  hardware found in ingenic X1830 SoC. YSH & ATIL CU1830-Neo uses X1830 SoC.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ingenic-trng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_NOMADIK
 	tristate "ST-Ericsson Nomadik Random Number Generator support"
 	depends on ARCH_NOMADIK || COMPILE_TEST
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on ST-Ericsson SoCs (8815 and 8500).
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called nomadik-rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_PSERIES
 	tristate "pSeries HW Random Number Generator support"
 	depends on PPC64 && IBMVIO
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on POWER7+ machines and above
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called pseries-rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_POWERNV
 	tristate "PowerNV Random Number Generator support"
 	depends on PPC_POWERNV
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This is the driver for Random Number Generator hardware found
 	  in POWER7+ and above machines for PowerNV platform.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called powernv-rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_HISI
 	tristate "Hisilicon Random Number Generator support"
 	depends on ARCH_HISI || COMPILE_TEST
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Hisilicon Hip04 and Hip05 SoC.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called hisi-rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_HISTB
 	tristate "Hisilicon STB Random Number Generator support"
 	depends on ARCH_HISI || COMPILE_TEST
-	default ARCH_HISI
+	default ARCH_HISI if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Hisilicon Hi37xx SoC.
@@ -385,34 +385,34 @@ config HW_RANDOM_ST
 config HW_RANDOM_XGENE
 	tristate "APM X-Gene True Random Number Generator (TRNG) support"
 	depends on ARCH_XGENE || COMPILE_TEST
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on APM X-Gene SoC.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called xgene_rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_STM32
 	tristate "STMicroelectronics STM32 random number generator"
 	depends on ARCH_STM32 || COMPILE_TEST
 	depends on HAS_IOMEM
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on STM32 microcontrollers.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called stm32-rng.
 
 	  If unsure, say N.
 
 config HW_RANDOM_PIC32
 	tristate "Microchip PIC32 Random Number Generator support"
 	depends on MACH_PIC32 || COMPILE_TEST
-	default HW_RANDOM if MACH_PIC32
+	default HW_RANDOM if MACH_PIC32 && !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on a PIC32.
@@ -439,105 +439,105 @@ config HW_RANDOM_MESON
 	tristate "Amlogic Meson Random Number Generator support"
 	depends on ARCH_MESON || COMPILE_TEST
 	depends on HAS_IOMEM && OF
-	default HW_RANDOM if ARCH_MESON
+	default HW_RANDOM if ARCH_MESON && !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Amlogic Meson SoCs.
 
 	  To compile this driver as a module, choose M here. the
 	  module will be called meson-rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_CAVIUM
 	tristate "Cavium ThunderX Random Number Generator support"
 	depends on PCI
 	depends on ARCH_THUNDER || (ARM64 && COMPILE_TEST)
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Cavium SoCs.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called cavium_rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_MTK
 	tristate "Mediatek Random Number Generator support"
 	depends on ARCH_MEDIATEK || COMPILE_TEST
 	depends on HAS_IOMEM && OF
-	default HW_RANDOM if ARCH_MEDIATEK
+	default HW_RANDOM if ARCH_MEDIATEK && !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Mediatek SoCs.
 
 	  To compile this driver as a module, choose M here. the
 	  module will be called mtk-rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_S390
 	tristate "S390 True Random Number Generator support"
 	depends on S390
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the True
 	  Random Number Generator available as CPACF extension
 	  on modern s390 hardware platforms.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called s390-trng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_EXYNOS
 	tristate "Samsung Exynos True Random Number Generator support"
 	depends on ARCH_EXYNOS || COMPILE_TEST
 	depends on HAS_IOMEM
-	default HW_RANDOM if ARCH_EXYNOS
+	default HW_RANDOM if ARCH_EXYNOS && !UML_RANDOM
 	help
 	  This driver provides support for the True Random Number
 	  Generator available in Exynos SoCs.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called exynos-trng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_OPTEE
 	tristate "OP-TEE based Random Number Generator support"
 	depends on OPTEE
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This  driver provides support for OP-TEE based Random Number
 	  Generator on ARM SoCs where hardware entropy sources are not
 	  accessible to normal world (Linux).
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called optee-rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_NPCM
 	tristate "NPCM Random Number Generator support"
 	depends on ARCH_NPCM || COMPILE_TEST
 	depends on HAS_IOMEM
-	default HW_RANDOM if ARCH_NPCM
+	default HW_RANDOM if ARCH_NPCM && !UML_RANDOM
 	help
 	  This driver provides support for the Random Number
 	  Generator hardware available in Nuvoton NPCM SoCs.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called npcm-rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_KEYSTONE
 	tristate "TI Keystone NETCP SA Hardware random number generator"
 	depends on ARCH_KEYSTONE || COMPILE_TEST
 	depends on HAS_IOMEM && OF
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This option enables Keystone's hardware random generator.
 
@@ -567,21 +567,21 @@ config HW_RANDOM_XIPHERA
 config HW_RANDOM_ARM_SMCCC_TRNG
 	tristate "Arm SMCCC TRNG firmware interface support"
 	depends on HAVE_ARM_SMCCC_DISCOVERY
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  Say 'Y' to enable the True Random Number Generator driver using
 	  the Arm SMCCC TRNG firmware interface. This reads entropy from
 	  higher exception levels (firmware, hypervisor). Uses SMCCC for
 	  communicating with the firmware:
 	  https://developer.arm.com/documentation/den0098/latest/
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called arm_smccc_trng.
 
 config HW_RANDOM_CN10K
 	tristate "Marvell CN10K Random Number Generator support"
 	depends on HW_RANDOM && PCI && (ARM64 || (64BIT && COMPILE_TEST))
-	default HW_RANDOM if ARCH_THUNDER
+	default HW_RANDOM if ARCH_THUNDER && !UML_RANDOM
 	help
 	 This driver provides support for the True Random Number
 	 generator available in Marvell CN10K SoCs.
@@ -603,7 +603,7 @@ config HW_RANDOM_ROCKCHIP
 	tristate "Rockchip True Random Number Generator"
 	depends on HW_RANDOM && (ARCH_ROCKCHIP || COMPILE_TEST)
 	depends on HAS_IOMEM
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the True Random Number
 	  Generator hardware found on some Rockchip SoC like RK3566 or RK3568.
#4 lore raw

Re: [PATCH 3/3] hwrng: Don't default to HW_RANDOM when UML_RANDOM is the trigger

Hi,

Quoted 53 lines · Dragan Simic

Since the commit 72d3e093afae (um: random: Register random as hwrng-core device), selecting the UML_RANDOM option may result in various HW_RANDOM_* options becoming selected as well, which doesn't make much sense for UML that obviously cannot use any of those HWRNG devices.

Let's have the HW_RANDOM_* options selected by default only when UML_RANDOM actually isn't already selected. With that in place, selecting UML_RANDOM no longer "triggers" the selection of various HW_RANDOM_* options.

Fixes 72d3e093afae (um: random: Register random as hwrng-core device)
---
 drivers/char/hw_random/Kconfig | 76 +++++++++++++++++-----------------
 1 file changed, 38 insertions(+), 38 deletions(-)
drivers/char/hw_random/Kconfig +2 -2
index e84c7f431840..283aba711af5 100644
@@ -38,47 +38,47 @@ config HW_RANDOM_TIMERIOMEM
 config HW_RANDOM_INTEL
 	tristate "Intel HW Random Number Generator support"
 	depends on (X86 || COMPILE_TEST) && PCI
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Intel i8xx-based motherboards.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called intel-rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_AMD
 	tristate "AMD HW Random Number Generator support"
 	depends on (X86 || COMPILE_TEST)
 	depends on PCI && HAS_IOPORT_MAP
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on AMD 76x-based motherboards.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called amd-rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_AIROHA
...

drivers/char/hw_random/Kconfig config HW_RANDOM_ROCKCHIP · line 609

Quoted 8 lines
drivers/char/hw_random/Kconfig +1 -1
@@ -603,7 +603,7 @@ config HW_RANDOM_ROCKCHIP
 	tristate "Rockchip True Random Number Generator"
 	depends on HW_RANDOM && (ARCH_ROCKCHIP || COMPILE_TEST)
 	depends on HAS_IOMEM
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the True Random Number
 	  Generator hardware found on some Rockchip SoC like RK3566 or RK3568.

Context:
I wanted to enable the HW_RANDOM_ROCKCHIP module in the Debian kernel so I send a MR to enable it as module. One of the reviewers remarked that this would *change* the module config from ``=y`` to ``=m`` as ``HW_RANDOM`` is configured ``=y`` due to Debian bug #1041007 [1].
IOW: if you don't say you want a HWRNG module, it will be built-in to the Debian kernel, while Debian normally uses ``=m`` if possible.

So that's when I realized almost all modules have ``default HW_RANDOM`` and then found that UML_RANDOM selects HW_RANDOM which in turn would enable (almost) all HWRNG modules unless you specify otherwise. It's actually the depends which would mostly 'prevent' that. This to me looks excessive, discussed the problem with Dragan which resulted in this patch set.

But why not just remove (most of) the ``default HW_RANDOM`` lines whereby a HWRNG module thus becomes opt-in instead of opt-out?

For ``HW_RANDOM_ROCKCHIP`` it's for the SoC found in *only* the rk3566 and rk3568 SoCs, but none of the others, and it's (currently) effective only on rk3568 based devices (due to deliberate DT config). In the help text of other modules I see mention of specific (series of) motherboards, so also there it may not be useful for all.

I did a partial ``git blame`` to get an idea as to why those defaults were there and found the following:

fed806f4072b ("[PATCH] allow hwrandom core to be a module") from 2006-12-06 with the goal to have them modular

2d9cab5194c8 ("hwrng: Fix a few driver dependencies and defaults") from 2014-04-08 which added several ... for consistency sake

e53ca8efcc5e ("hwrng: airoha - add support for Airoha EN7581 TRNG") from 2024-10-17 with no explicit mention why it was done, so that was most likely as that was used elsewhere (thus consistency)

So while this patch does prevent accidental enablement due to UML_RANDOM enablement, it does seem to me to be needlessly complex and making it opt-in, which was the assumption of my MR to begin with, much simpler.

I can be missing other considerations why the current solution would be better, but I figured I'd mention my perspective.

Cheers,
Diederik

[1] https://bugs.debian.org/1041007

#5 lore raw

Re: [PATCH 3/3] hwrng: Don't default to HW_RANDOM when UML_RANDOM is the trigger

Hello Diederik,

Quoted 74 lines · Diederik de Haas
Quoted 61 lines · Dragan Simic

Since the commit 72d3e093afae (um: random: Register random as hwrng-core device), selecting the UML_RANDOM option may result in various HW_RANDOM_* options becoming selected as well, which doesn't make much sense for UML that obviously cannot use any of those HWRNG devices.

Let's have the HW_RANDOM_* options selected by default only when UML_RANDOM actually isn't already selected. With that in place, selecting UML_RANDOM no longer "triggers" the selection of various HW_RANDOM_* options.

Fixes 72d3e093afae (um: random: Register random as hwrng-core device)
---
 drivers/char/hw_random/Kconfig | 76 
+++++++++++++++++-----------------
 1 file changed, 38 insertions(+), 38 deletions(-)
drivers/char/hw_random/Kconfig +3 -3
index e84c7f431840..283aba711af5 100644
@@ -38,47 +38,47 @@ config HW_RANDOM_TIMERIOMEM
 config HW_RANDOM_INTEL
 	tristate "Intel HW Random Number Generator support"
 	depends on (X86 || COMPILE_TEST) && PCI
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Intel i8xx-based motherboards.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called intel-rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_AMD
 	tristate "AMD HW Random Number Generator support"
 	depends on (X86 || COMPILE_TEST)
 	depends on PCI && HAS_IOPORT_MAP
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on AMD 76x-based motherboards.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called amd-rng.
 
 	  If unsure, say Y.
 
 config HW_RANDOM_AIROHA
...
@@ -603,7 +603,7 @@ config HW_RANDOM_ROCKCHIP
 	tristate "Rockchip True Random Number Generator"
 	depends on HW_RANDOM && (ARCH_ROCKCHIP || COMPILE_TEST)
 	depends on HAS_IOMEM
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM
 	help
 	  This driver provides kernel-side support for the True Random 
Quoted 3 lines

Number
Generator hardware found on some Rockchip SoC like RK3566 or
RK3568.

Context:
I wanted to enable the HW_RANDOM_ROCKCHIP module in the Debian kernel so I send a MR to enable it as module. One of the reviewers remarked that this would *change* the module config from ``=y`` to ``=m`` as ``HW_RANDOM`` is configured ``=y`` due to Debian bug #1041007 [1].
IOW: if you don't say you want a HWRNG module, it will be built-in to the Debian kernel, while Debian normally uses ``=m`` if possible.

Quoted 6 lines

So that's when I realized almost all modules have ``default HW_RANDOM`` and then found that UML_RANDOM selects HW_RANDOM which in turn would enable (almost) all HWRNG modules unless you specify otherwise. It's actually the depends which would mostly 'prevent' that. This to me looks excessive, discussed the problem with Dragan which resulted in this patch set.

Thanks a lot for providing a detailed description of the series of events that have led to this patch!

Quoted 8 lines

But why not just remove (most of) the ``default HW_RANDOM`` lines whereby a HWRNG module thus becomes opt-in instead of opt-out?

For ``HW_RANDOM_ROCKCHIP`` it's for the SoC found in *only* the rk3566 and rk3568 SoCs, but none of the others, and it's (currently) effective only on rk3568 based devices (due to deliberate DT config). In the help text of other modules I see mention of specific (series of) motherboards, so also there it may not be useful for all.

Removing the defaults from the Kconfig would be a much better solution, but I'm afraid it would actually be quite disruptive, requiring changes to various kernel configurations.

Quoted 13 lines

I did a partial ``git blame`` to get an idea as to why those defaults were there and found the following:

fed806f4072b ("[PATCH] allow hwrandom core to be a module") from 2006-12-06 with the goal to have them modular

2d9cab5194c8 ("hwrng: Fix a few driver dependencies and defaults") from 2014-04-08 which added several ... for consistency sake

e53ca8efcc5e ("hwrng: airoha - add support for Airoha EN7581 TRNG") from 2024-10-17 with no explicit mention why it was done, so that was most likely as that was used elsewhere (thus consistency)

Quoted 6 lines

So while this patch does prevent accidental enablement due to UML_RANDOM enablement, it does seem to me to be needlessly complex and making it opt-in, which was the assumption of my MR to begin with, much simpler.

I can be missing other considerations why the current solution would be better, but I figured I'd mention my perspective.

The only upside of the current solution is that it represents the least disruptive approach.

I'd suggest that this patch is kept as-is, and I'd add another patch on top of it, which would remove the defaults from the Kconfig and update the relevant default configs, of course if the maintainers are fine with such an approach, and if there is general agreement toward getting rid of the defaults.

Having two patches, as proposed above, would make the bisecting later much easier, in case some unforeseen issues are discovered in the future.

Quoted 1 line

[1] https://bugs.debian.org/1041007

maintainer
#6 lore raw

Re: [PATCH 3/3] hwrng: Don't default to HW_RANDOM when UML_RANDOM is the trigger

In reply to Dragan Simic
Quoted 21 lines · Dragan Simic

Since the commit 72d3e093afae (um: random: Register random as hwrng-core device), selecting the UML_RANDOM option may result in various HW_RANDOM_* options becoming selected as well, which doesn't make much sense for UML that obviously cannot use any of those HWRNG devices.

Let's have the HW_RANDOM_* options selected by default only when UML_RANDOM actually isn't already selected. With that in place, selecting UML_RANDOM no longer "triggers" the selection of various HW_RANDOM_* options.

Fixes 72d3e093afae (um: random: Register random as hwrng-core device)
---
 drivers/char/hw_random/Kconfig | 76 +++++++++++++++++-----------------
 1 file changed, 38 insertions(+), 38 deletions(-)
drivers/char/hw_random/Kconfig +0 -0
index e84c7f431840..283aba711af5 100644

drivers/char/hw_random/Kconfig config HW_RANDOM_TIMERIOMEM · line 41

Quoted 5 lines
drivers/char/hw_random/Kconfig +1 -1
@@ -38,47 +38,47 @@ config HW_RANDOM_TIMERIOMEM
 config HW_RANDOM_INTEL
 	tristate "Intel HW Random Number Generator support"
 	depends on (X86 || COMPILE_TEST) && PCI
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM

This is disgusting. Just remove all the defaults, and we can add back the ones actually needed. Just remember to set the default to something sane like HW_RANDOM && dependencies.

Cheers,

Signature · 3 lines
Email: Herbert Xu <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
#7 lore raw

Re: [PATCH 3/3] hwrng: Don't default to HW_RANDOM when UML_RANDOM is the trigger

Hello Herbert,

Quoted 18 lines · Herbert Xu
Quoted 17 lines · Dragan Simic

Since the commit 72d3e093afae (um: random: Register random as hwrng-core device), selecting the UML_RANDOM option may result in various HW_RANDOM_* options becoming selected as well, which doesn't make much sense for UML that obviously cannot use any of those HWRNG devices.

Let's have the HW_RANDOM_* options selected by default only when UML_RANDOM actually isn't already selected. With that in place, selecting UML_RANDOM no longer "triggers" the selection of various HW_RANDOM_* options.

Fixes 72d3e093afae (um: random: Register random as hwrng-core device)
---
 drivers/char/hw_random/Kconfig | 76 
+++++++++++++++++-----------------
 1 file changed, 38 insertions(+), 38 deletions(-)
Quoted 14 lines

drivers/char/hw_random/Kconfig config HW_RANDOM_TIMERIOMEM · line 41

Quoted 10 lines
drivers/char/hw_random/Kconfig +1 -1
index e84c7f431840..283aba711af5 100644
@@ -38,47 +38,47 @@ config HW_RANDOM_TIMERIOMEM
 config HW_RANDOM_INTEL
 	tristate "Intel HW Random Number Generator support"
 	depends on (X86 || COMPILE_TEST) && PCI
-	default HW_RANDOM
+	default HW_RANDOM if !UML_RANDOM

This is disgusting. Just remove all the defaults, and we can add back the ones actually needed. Just remember to set the default to something sane like HW_RANDOM && dependencies.

Could you, please, clarify why we need(ed) the defaults at all? Also, I'm a bit puzzled about what would be the defaults that are actually needed? Are you actually referring to what I proposed in my earlier response? [1] I'd appreciate a clarification.

As a note, I tried to kind of "fix" it in a least intrusive way, but I'll gladly have it fixed properly in the v2. To me, getting rid of the defaults completely would be the proper way.

[1] https://lore.kernel.org/linux-crypto/[email protected]/

maintainer
#8 lore raw

Re: [PATCH 3/3] hwrng: Don't default to HW_RANDOM when UML_RANDOM is the trigger

Quoted 5 lines · Dragan Simic

Could you, please, clarify why we need(ed) the defaults at all? Also, I'm a bit puzzled about what would be the defaults that are actually needed? Are you actually referring to what I proposed in my earlier response? [1] I'd appreciate a clarification.

In general there shouldn't be any default. The only exception would be perhaps for embedded boards where the RNG is always present given the dependencies. But in that case the default should be conditional on the dependency (or perhaps the whole config should become unconditional).

The current defaults are mostly there for historical reasons.

Cheers,

Signature · 3 lines
Email: Herbert Xu <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
#9 lore raw

Re: [PATCH 3/3] hwrng: Don't default to HW_RANDOM when UML_RANDOM is the trigger

Quoted 7 lines · Herbert Xu
Quoted 5 lines · Dragan Simic

Could you, please, clarify why we need(ed) the defaults at all? Also, I'm a bit puzzled about what would be the defaults that are actually needed? Are you actually referring to what I proposed in my earlier response? [1] I'd appreciate a clarification.

Quoted 7 lines

In general there shouldn't be any default. The only exception would be perhaps for embedded boards where the RNG is always present given the dependencies. But in that case the default should be conditional on the dependency (or perhaps the whole config should become unconditional).

The current defaults are mostly there for historical reasons.

Thanks for the clarification.

I think it would be the best to get rid of the current defaults in the drivers/char/hw_random/Kconfig file entirely, together with updating as many of the affected arch/*/configs/*_defconfig files as possible to select the relevant HW_RANDOM_* config option(s) whenever that's a sane thing to do.

Such an approach should be both proper and least disruptive.

maintainer
#10 lore raw
In reply to Dragan Simic
Quoted 9 lines · Dragan Simic

This is a small patch series that makes the already existing HW_RANDOM_* options in the hw_random Kconfig selected by default only when the UML_RANDOM option isn't already selected. Having the HW_RANDOM_* options selected doesn't make much sense for user-mode Linux (UML), which obviously cannot make use of any HWRNG devices.

Along the way, some additional trivial cleanups of the hw_random Kconfig file are also performed as spotted, in separate patches.

Quoted 7 lines

Dragan Simic (3):
hwrng: Use tabs as leading whitespace consistently in Kconfig
hwrng: Move one "tristate" Kconfig description to the usual place
hwrng: Don't default to HW_RANDOM when UML_RANDOM is the trigger

 drivers/char/hw_random/Kconfig | 84 +++++++++++++++++-----------------
 1 file changed, 42 insertions(+), 42 deletions(-)

Patches 1-2 applied. Thanks.

Signature · 3 lines
Email: Herbert Xu <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt