Skip to contentSkip to conversation

ASoC: rockchip: i2s_tdm: Re-add the set_sysclk callback

PATCH In review Detlev Casanova 3 participants 11 messages Jan 17, 2025 – Feb 18

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ASoC: rockchip: i2s_tdm: Re-add the set_sysclk callback

In commit
9e2ab4b18ebd ("ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates"), the set_sysclk callback was removed as considered unused as the mclk rate can be set in the hw_params callback.
The difference between hw_params and set_sysclk is that the former is called with the audio sampling rate set in the params (e.g.: 48000 Hz) while the latter is called with a clock rate already computed with
sampling_rate * mclk-fs (e.g.: 48000 * 256)

For HDMI audio using the Rockchip I2S TDM driver, the mclk-fs value must be set to 128 instead of the default 256, and that value is set in the device tree at the machine driver level (like a simple-audio-card compatible node).
Therefore, the i2s_tdm driver has no idea that another mclk-fs value can be configured and simply computes the mclk rate in the hw_params callback with DEFAULT_MCLK_FS * params_rate(params), which is wrong for HDMI audio.

Re-add the set_sysclk callback so that the mclk rate is computed by the machine driver which has the correct mclk-fs value set in its device tree node.

Fixes 9e2ab4b18ebd ("ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates")
---
 sound/soc/rockchip/rockchip_i2s_tdm.c | 31 +++++++++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)
sound/soc/rockchip/rockchip_i2s_tdm.c +29 -2
index d1f28699652f..acd75e48851f 100644
@@ -22,7 +22,6 @@
 
 #define DRV_NAME "rockchip-i2s-tdm"
 
-#define DEFAULT_MCLK_FS				256
 #define CH_GRP_MAX				4  /* The max channel 8 / 2 */
 #define MULTIPLEX_CH_MAX			10
 
@@ -70,6 +69,8 @@ struct rk_i2s_tdm_dev {
 	bool has_playback;
 	bool has_capture;
 	struct snd_soc_dai_driver *dai;
+	unsigned int mclk_rx_freq;
+	unsigned int mclk_tx_freq;
 };
 
 static int to_ch_num(unsigned int val)
@@ -645,6 +646,27 @@ static int rockchip_i2s_trcm_mode(struct snd_pcm_substream *substream,
 	return 0;
 }
 
+static int rockchip_i2s_tdm_set_sysclk(struct snd_soc_dai *cpu_dai, int stream,
+				       unsigned int freq, int dir)
+{
+	struct rk_i2s_tdm_dev *i2s_tdm = to_info(cpu_dai);
+
+	if (i2s_tdm->clk_trcm) {
+		i2s_tdm->mclk_tx_freq = freq;
+		i2s_tdm->mclk_rx_freq = freq;
+	} else {
+		if (stream == SNDRV_PCM_STREAM_PLAYBACK)
+			i2s_tdm->mclk_tx_freq = freq;
+		else
+			i2s_tdm->mclk_rx_freq = freq;
+	}
+
+	dev_dbg(i2s_tdm->dev, "The target mclk_%s freq is: %d\n",
+		stream ? "rx" : "tx", freq);
+
+	return 0;
+}
+
 static int rockchip_i2s_tdm_hw_params(struct snd_pcm_substream *substream,
 				      struct snd_pcm_hw_params *params,
 				      struct snd_soc_dai *dai)
@@ -659,15 +681,19 @@ static int rockchip_i2s_tdm_hw_params(struct snd_pcm_substream *substream,
 
 		if (i2s_tdm->clk_trcm == TRCM_TX) {
 			mclk = i2s_tdm->mclk_tx;
+			mclk_rate = i2s_tdm->mclk_tx_freq;
 		} else if (i2s_tdm->clk_trcm == TRCM_RX) {
 			mclk = i2s_tdm->mclk_rx;
+			mclk_rate = i2s_tdm->mclk_rx_freq;
 		} else if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 			mclk = i2s_tdm->mclk_tx;
+			mclk_rate = i2s_tdm->mclk_tx_freq;
 		} else {
 			mclk = i2s_tdm->mclk_rx;
+			mclk_rate = i2s_tdm->mclk_rx_freq;
 		}
 
-		err = clk_set_rate(mclk, DEFAULT_MCLK_FS * params_rate(params));
+		err = clk_set_rate(mclk, mclk_rate);
 		if (err)
 			return err;
 
@@ -827,6 +853,7 @@ static const struct snd_soc_dai_ops rockchip_i2s_tdm_dai_ops = {
 	.hw_params = rockchip_i2s_tdm_hw_params,
 	.set_bclk_ratio	= rockchip_i2s_tdm_set_bclk_ratio,
 	.set_fmt = rockchip_i2s_tdm_set_fmt,
+	.set_sysclk = rockchip_i2s_tdm_set_sysclk,
 	.set_tdm_slot = rockchip_dai_tdm_slot,
 	.trigger = rockchip_i2s_tdm_trigger,
 };
Signature · 1 line
2.48.1
maintainer
#1 lore raw
Quoted 10 lines · Detlev Casanova

In commit
9e2ab4b18ebd ("ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates"), the set_sysclk callback was removed as considered unused as the mclk rate can be set in the hw_params callback.
The difference between hw_params and set_sysclk is that the former is called with the audio sampling rate set in the params (e.g.: 48000 Hz) while the latter is called with a clock rate already computed with
sampling_rate * mclk-fs (e.g.: 48000 * 256)

[...]

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: rockchip: i2s_tdm: Re-add the set_sysclk callback

      commit: 5323186e2e8d33c073fad51e24f18e2d6dbae2da

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

#2 lore raw
In reply to Detlev Casanova

Hello Detlev,

Quoted 18 lines · Detlev Casanova

In commit
9e2ab4b18ebd ("ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates"), the set_sysclk callback was removed as considered unused as the mclk rate can be set in the hw_params callback.
The difference between hw_params and set_sysclk is that the former is called with the audio sampling rate set in the params (e.g.: 48000 Hz) while the latter is called with a clock rate already computed with
sampling_rate * mclk-fs (e.g.: 48000 * 256)

For HDMI audio using the Rockchip I2S TDM driver, the mclk-fs value must be set to 128 instead of the default 256, and that value is set in the device tree at the machine driver level (like a simple-audio-card compatible node).
Therefore, the i2s_tdm driver has no idea that another mclk-fs value can be configured and simply computes the mclk rate in the hw_params callback with DEFAULT_MCLK_FS * params_rate(params), which is wrong for HDMI audio.

Quoted 3 lines

Re-add the set_sysclk callback so that the mclk rate is computed by the machine driver which has the correct mclk-fs value set in its device tree node.

I'm afraid I just found this commit breaks audio capture on the RK3308.

Using 'arecord -Vmono -d 2 -c 8 -f S16_LE -r 96000 /dev/null' I get:

rockchip-i2s-tdm ff320000.i2s: ASoC error (-22): at snd_soc_dai_hw_params() on ff320000.i2s
ff320000.i2s-rk3308-hifi: ASoC error (-22): at __soc_pcm_hw_params() on ff320000.i2s-rk3308-hifi

Tested on:

* Radxa Rock Pi S
* Upstream kernel
* arm64 defconfig

Tested kernel versions:

* v6.12 works
* 5323186e2e8d (this commit) fails
* 5323186e2e8d^ works
* 21cfbeae7d7c (same patch on stable/linux-6.12.y) fails
* 21cfbeae7d7c^ works
* v6.19 fails
* v6.19 + 'git revert 5323186e2e8d' works

I don't have more information at the moment.

Quoted 1 line
Fixes 9e2ab4b18ebd ("ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates")

I'm the author of commit 9e2ab4b18ebd mentioned in the 'Fixes:' tag, so it would have been good to Cc me. I would have had the option of testing your patch and this regression could have been solved before getting in mainline. I think b4 does it automatically (and perhaps get_maintainers with appropriate flags).

Luca

--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

maintainer
#3 lore raw
Quoted 1 line · Luca Ceresoli

I'm afraid I just found this commit breaks audio capture on the RK3308.

Can you please send a revert explaining the issue so we can drop the patch (unless a fix is forthcoming which doesn't seem likely right now, we can always re-add the support later)?

#4 lore raw

Hello Mark,

Quoted 7 lines · Mark Brown
Quoted 1 line · Luca Ceresoli

I'm afraid I just found this commit breaks audio capture on the RK3308.

Can you please send a revert explaining the issue so we can drop the patch (unless a fix is forthcoming which doesn't seem likely right now, we can always re-add the support later)?

Thanks for the feedback! Revert patch sent.

Best regards,
Luca

--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

#5 lore raw
In reply to Luca Ceresoli

Hello Detlev,

Quoted 48 lines · Luca Ceresoli

Hello Detlev,

Quoted 18 lines · Detlev Casanova

In commit
9e2ab4b18ebd ("ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates"), the set_sysclk callback was removed as considered unused as the mclk rate can be set in the hw_params callback.
The difference between hw_params and set_sysclk is that the former is called with the audio sampling rate set in the params (e.g.: 48000 Hz) while the latter is called with a clock rate already computed with
sampling_rate * mclk-fs (e.g.: 48000 * 256)

For HDMI audio using the Rockchip I2S TDM driver, the mclk-fs value must be set to 128 instead of the default 256, and that value is set in the device tree at the machine driver level (like a simple-audio-card compatible node).
Therefore, the i2s_tdm driver has no idea that another mclk-fs value can be configured and simply computes the mclk rate in the hw_params callback with DEFAULT_MCLK_FS * params_rate(params), which is wrong for HDMI audio.

Quoted 3 lines

Re-add the set_sysclk callback so that the mclk rate is computed by the machine driver which has the correct mclk-fs value set in its device tree node.

I'm afraid I just found this commit breaks audio capture on the RK3308.

Using 'arecord -Vmono -d 2 -c 8 -f S16_LE -r 96000 /dev/null' I get:

rockchip-i2s-tdm ff320000.i2s: ASoC error (-22): at snd_soc_dai_hw_params() on ff320000.i2s
ff320000.i2s-rk3308-hifi: ASoC error (-22): at __soc_pcm_hw_params() on ff320000.i2s-rk3308-hifi

Tested on:

* Radxa Rock Pi S
* Upstream kernel
* arm64 defconfig

Tested kernel versions:

* v6.12 works
* 5323186e2e8d (this commit) fails
* 5323186e2e8d^ works
* 21cfbeae7d7c (same patch on stable/linux-6.12.y) fails
* 21cfbeae7d7c^ works
* v6.19 fails
* v6.19 + 'git revert 5323186e2e8d' works

Quoted 1 line

I don't have more information at the moment.

Let me add some more info to my previous report.

The function failing is clk_set_rate() in rockchip_i2s_tdm_hw_params().

I added some logging to rockchip_i2s_tdm_hw_params() and here's the output:

On v6.19-11566-g254edc893f3a (current Linux master)

At boot:

    [    3.324622] rockchip-i2s-tdm ff320000.i2s: The target mclk_tx freq is: 50176000
    [    3.324720] rockchip-i2s-tdm ff320000.i2s: using zero-initialized flat cache, this may cause unexpected behavior
  When launching arecord:
    [   18.429389] rockchip_i2s_tdm_hw_params:653 i2s_tdm->is_master_mode = 1
    [   18.430154] rockchip_i2s_tdm_hw_params:654 i2s_tdm->mclk_tx clk_i2s2_8ch_tx
    [   18.430815] rockchip_i2s_tdm_hw_params:655 i2s_tdm->mclk_rx clk_i2s2_8ch_rx
    [   18.431465] rockchip_i2s_tdm_hw_params:656 i2s_tdm->mclk_tx_freq 50176000
    [   18.432097] rockchip_i2s_tdm_hw_params:657 i2s_tdm->mclk_rx_freq 0
    [   18.432677] rockchip_i2s_tdm_hw_params:658 i2s_tdm->clk_trcm 0
    [   18.433230] rockchip_i2s_tdm_hw_params:659 substream->stream 1
    [   18.433858] rockchip_i2s_tdm_hw_params:678 mclk clk_i2s2_8ch_rx
    [   18.434423] rockchip_i2s_tdm_hw_params:679 mclk_rate 0
    [   18.434977] rockchip_i2s_tdm_hw_params:682 clk_set_rate(clk_i2s2_8ch_rx, 0) returned -22
    [   18.435743] rockchip-i2s-tdm ff320000.i2s: ASoC error (-22): at snd_soc_dai_hw_params() on ff320000.i2s
    [   18.436699]  ff320000.i2s-rk3308-hifi: ASoC error (-22): at __soc_pcm_hw_params() on ff320000.i2s-rk3308-hifi

On v6.19-11566-g254edc893f3a + 'git revert 5323186e2e8d'

At boot:

    [    3.283853] rockchip-i2s-tdm ff320000.i2s: using zero-initialized flat cache, this may cause unexpected behavior
  When launching arecord:
    [   11.952290] rockchip_i2s_tdm_hw_params:631 i2s_tdm->is_master_mode = 1
    [   11.952955] rockchip_i2s_tdm_hw_params:632 i2s_tdm->mclk_tx clk_i2s2_8ch_tx
    [   11.953615] rockchip_i2s_tdm_hw_params:633 i2s_tdm->mclk_rx clk_i2s2_8ch_rx
    [   11.954355] rockchip_i2s_tdm_hw_params:636 i2s_tdm->clk_trcm 0
    [   11.954917] rockchip_i2s_tdm_hw_params:637 substream->stream 1
    [   11.955477] rockchip_i2s_tdm_hw_params:652 mclk clk_i2s2_8ch_rx
    [   11.956048] rockchip_i2s_tdm_hw_params:653 params_rate(params) 96000
    [   11.956769] rockchip_i2s_tdm_hw_params:656 clk_set_rate(clk_i2s2_8ch_rx, 24576000) returned 0

I cannot point to the right fix but the value 0 in i2s_tdm->mclk_rx_freq appears as a good clue, perhaps it has never been set.

I hope this helps.

Luca

--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

#6 lore raw

Hi Lucas, sorry for breaking support on your board.
I'm also surprised that you were not added in CC of the original patch.

Can you try to keep the patch and apply the attached one instead ?

Detlev.

Quoted 102 lines · Luca Ceresoli

Hello Detlev,

Quoted 47 lines · Luca Ceresoli

Hello Detlev,

Quoted 18 lines · Detlev Casanova

In commit
9e2ab4b18ebd ("ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates"), the set_sysclk callback was removed as considered unused as the mclk rate can be set in the hw_params callback.
The difference between hw_params and set_sysclk is that the former is called with the audio sampling rate set in the params (e.g.: 48000 Hz) while the latter is called with a clock rate already computed with
sampling_rate * mclk-fs (e.g.: 48000 * 256)

For HDMI audio using the Rockchip I2S TDM driver, the mclk-fs value must be set to 128 instead of the default 256, and that value is set in the device tree at the machine driver level (like a simple-audio-card compatible node).
Therefore, the i2s_tdm driver has no idea that another mclk-fs value can be configured and simply computes the mclk rate in the hw_params callback with DEFAULT_MCLK_FS * params_rate(params), which is wrong for HDMI audio.

Quoted 3 lines

Re-add the set_sysclk callback so that the mclk rate is computed by the machine driver which has the correct mclk-fs value set in its device tree node.

I'm afraid I just found this commit breaks audio capture on the RK3308.

Using 'arecord -Vmono -d 2 -c 8 -f S16_LE -r 96000 /dev/null' I get:

   rockchip-i2s-tdm ff320000.i2s: ASoC error (-22): at snd_soc_dai_hw_params() on ff320000.i2s
    ff320000.i2s-rk3308-hifi: ASoC error (-22): at __soc_pcm_hw_params() on ff320000.i2s-rk3308-hifi

Tested on:

* Radxa Rock Pi S
* Upstream kernel
* arm64 defconfig

Tested kernel versions:

* v6.12 works
* 5323186e2e8d (this commit) fails
* 5323186e2e8d^ works
* 21cfbeae7d7c (same patch on stable/linux-6.12.y) fails
* 21cfbeae7d7c^ works
* v6.19 fails
* v6.19 + 'git revert 5323186e2e8d' works

Quoted 1 line

I don't have more information at the moment.

Let me add some more info to my previous report.

The function failing is clk_set_rate() in rockchip_i2s_tdm_hw_params().

I added some logging to rockchip_i2s_tdm_hw_params() and here's the output:

   On v6.19-11566-g254edc893f3a (current Linux master)

   At boot:
     [    3.324622] rockchip-i2s-tdm ff320000.i2s: The target mclk_tx freq is: 50176000
     [    3.324720] rockchip-i2s-tdm ff320000.i2s: using zero-initialized flat cache, this may cause unexpected behavior
   When launching arecord:
     [   18.429389] rockchip_i2s_tdm_hw_params:653 i2s_tdm->is_master_mode = 1
     [   18.430154] rockchip_i2s_tdm_hw_params:654 i2s_tdm->mclk_tx clk_i2s2_8ch_tx
     [   18.430815] rockchip_i2s_tdm_hw_params:655 i2s_tdm->mclk_rx clk_i2s2_8ch_rx
     [   18.431465] rockchip_i2s_tdm_hw_params:656 i2s_tdm->mclk_tx_freq 50176000
     [   18.432097] rockchip_i2s_tdm_hw_params:657 i2s_tdm->mclk_rx_freq 0
     [   18.432677] rockchip_i2s_tdm_hw_params:658 i2s_tdm->clk_trcm 0
     [   18.433230] rockchip_i2s_tdm_hw_params:659 substream->stream 1
     [   18.433858] rockchip_i2s_tdm_hw_params:678 mclk clk_i2s2_8ch_rx
     [   18.434423] rockchip_i2s_tdm_hw_params:679 mclk_rate 0
     [   18.434977] rockchip_i2s_tdm_hw_params:682 clk_set_rate(clk_i2s2_8ch_rx, 0) returned -22
     [   18.435743] rockchip-i2s-tdm ff320000.i2s: ASoC error (-22): at snd_soc_dai_hw_params() on ff320000.i2s
     [   18.436699]  ff320000.i2s-rk3308-hifi: ASoC error (-22): at __soc_pcm_hw_params() on ff320000.i2s-rk3308-hifi

   On v6.19-11566-g254edc893f3a + 'git revert 5323186e2e8d'

   At boot:
     [    3.283853] rockchip-i2s-tdm ff320000.i2s: using zero-initialized flat cache, this may cause unexpected behavior
   When launching arecord:
     [   11.952290] rockchip_i2s_tdm_hw_params:631 i2s_tdm->is_master_mode = 1
     [   11.952955] rockchip_i2s_tdm_hw_params:632 i2s_tdm->mclk_tx clk_i2s2_8ch_tx
     [   11.953615] rockchip_i2s_tdm_hw_params:633 i2s_tdm->mclk_rx clk_i2s2_8ch_rx
     [   11.954355] rockchip_i2s_tdm_hw_params:636 i2s_tdm->clk_trcm 0
     [   11.954917] rockchip_i2s_tdm_hw_params:637 substream->stream 1
     [   11.955477] rockchip_i2s_tdm_hw_params:652 mclk clk_i2s2_8ch_rx
     [   11.956048] rockchip_i2s_tdm_hw_params:653 params_rate(params) 96000
     [   11.956769] rockchip_i2s_tdm_hw_params:656 clk_set_rate(clk_i2s2_8ch_rx, 24576000) returned 0

I cannot point to the right fix but the value 0 in i2s_tdm->mclk_rx_freq appears as a good clue, perhaps it has never been set.

I hope this helps.

Luca

--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Quoted 4 lines

_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip

From f2441859c368fe25512a71e82160b0a307ed4429 Mon Sep 17 00:00:00 2001
From: Detlev Casanova <[email protected]>
Date: Wed, 18 Feb 2026 10:46:50 -0500
Subject: [PATCH] sound: rockchip: Use param freq if not provided by set_sysclk

Hi Lucas, sorry for breaking support on your board.
I'm also surprised that you were not added in CC of the original patch.

Can you try to keep the patch and apply this instead ?

Drivers will not always set the sysclk.
If that is the case, use the clock set in the params multiplied by the default mclk-fs.

---
 sound/soc/rockchip/rockchip_i2s_tdm.c | 6 ++++++
 1 file changed, 6 insertions(+)
sound/soc/rockchip/rockchip_i2s_tdm.c +6 -0
index 770b9bfbb384..f2cda7e64b74 100644
@@ -665,6 +665,12 @@ static int rockchip_i2s_tdm_hw_params(struct snd_pcm_substream *substream,
 			mclk_rate = i2s_tdm->mclk_rx_freq;
 		}
 
+		/* If the dai/component driver didn't call set_sysclk(), simply
+		 * use the freq from the params.
+		 */
+		if (!mclk_rate)
+			mclk_rate = DEFAULT_MCLK_FS * params_rate(params);
+
 		err = clk_set_rate(mclk, mclk_rate);
 		if (err)
 			return err;
Signature · 1 line
2.53.0

_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip

#7 lore raw

Hello Detlev,

Quoted 4 lines · Detlev Casanova

Hi Lucas, sorry for breaking support on your board.
I'm also surprised that you were not added in CC of the original patch.

Can you try to keep the patch and apply the attached one instead ?

Thanks for the quick feedback.

About your patch:

sound/soc/rockchip/rockchip_i2s_tdm.c +3 -0
@@ -665,6 +665,12 @@ static int rockchip_i2s_tdm_hw_params(struct snd_pcm_substream *substream,
 			mclk_rate = i2s_tdm->mclk_rx_freq;
 		}
 
+		/* If the dai/component driver didn't call set_sysclk(), simply
+		 * use the freq from the params.
+		 */
 

The comment is slightly incorrect: set_sysclk() was called in my case, but only for playback, not for capture. You can reword accordingly.

+ if (!mclk_rate)
+ mclk_rate = DEFAULT_MCLK_FS * params_rate(params);

With this, and DEFAULT_MCLK_FS defined to 256, arecord is working again.

Luca

--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

maintainer
#8 lore raw
Quoted 6 lines · Luca Ceresoli

On Wed Feb 18, 2026 at 5:01 PM CET, Detlev Casanova wrote:

(quoted diff) +2 -0
+		if (!mclk_rate)
+			mclk_rate = DEFAULT_MCLK_FS * params_rate(params);

With this, and DEFAULT_MCLK_FS defined to 256, arecord is working again.

I did have the revert queued, but a fix would be even better if the patch could be sent?

#9 lore raw

Hi Mark,

Quoted 7 lines · Mark Brown
Quoted 4 lines · Luca Ceresoli

On Wed Feb 18, 2026 at 5:01 PM CET, Detlev Casanova wrote:

(quoted diff) +2 -0
+		if (!mclk_rate)
+			mclk_rate = DEFAULT_MCLK_FS * params_rate(params);

With this, and DEFAULT_MCLK_FS defined to 256, arecord is working again.

I did have the revert queued, but a fix would be even better if the patch could be sent?

A fix will follow a bit later today, then.

Detlev.

_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip

maintainer
#10 lore raw
Quoted 6 lines · Detlev Casanova
Quoted 2 lines · Mark Brown

I did have the revert queued, but a fix would be even better if the patch could be sent?

A fix will follow a bit later today, then.

Fantastic!