Skip to contentSkip to conversation

ALSA: hda/realtek: Add mic mute LED quirk for HP Laptop 15-fd0xxx

PATCH In review Kshamendra Kumar Mishra 2 participants 2 messages Jul 7 – Jul 8 Sound

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ALSA: hda/realtek: Add mic mute LED quirk for HP Laptop 15-fd0xxx

From: Kshamendra Kumar Mishra <[email protected]>
Date: Tue, 7 Jul 2026 22:07:44 +0530
Subject: [PATCH] hda/realtek: Add mic mute LED quirk for HP Laptop 15-fd0xxx

The HP Laptop 15-fd0xxx uses GPIO bit 0 to control the mic mute LED, but currently the quirk only enables the speaker mute LED (via coef bit). Switch to the existing ALC236_FIXUP_HP_MUTE_LED_MICMUTE_GPIO fixup which additionally registers a GPIO-based mic mute LED, mapping to the same verbs (SET_GPIO_DATA/SET_GPIO_DIRECTION bit 0) that the platform firmware uses.

---
 sound/hda/codecs/realtek/alc269.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/hda/codecs/realtek/alc269.c +1 -1
index dcbc669842e0..8c0d503cbf8a 100644
@@ -7236,7 +7236,7 @@ static const struct hda_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x103c, 0x8da8, "HP 16 Piston OmniBook X", ALC245_FIXUP_HP_ENVY_X360_15_FH0XXX),
 	SND_PCI_QUIRK(0x103c, 0x8dc9, "HP Laptop 15-fc0xxx", ALC236_FIXUP_HP_DMIC),
 	SND_PCI_QUIRK(0x103c, 0x8dd4, "HP EliteStudio 8 AIO", ALC274_FIXUP_HP_AIO_BIND_DACS),
-	SND_PCI_QUIRK(0x103c, 0x8dd7, "HP Laptop 15-fd0xxx", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2),
+	SND_PCI_QUIRK(0x103c, 0x8dd7, "HP Laptop 15-fd0xxx", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_GPIO),
 	SND_PCI_QUIRK(0x103c, 0x8de8, "HP Gemtree", ALC245_FIXUP_TAS2781_SPI_2),
 	SND_PCI_QUIRK(0x103c, 0x8de9, "HP Gemtree", ALC245_FIXUP_TAS2781_SPI_2),
 	SND_PCI_QUIRK(0x103c, 0x8dec, "HP EliteBook 640 G12", ALC236_FIXUP_HP_GPIO_LED),

--
2.55.0

#1 lore raw
Quoted 5 lines · Kshamendra Kumar Mishra

From: Kshamendra Kumar Mishra <[email protected]>
Date: Tue, 7 Jul 2026 22:07:44 +0530
Subject: [PATCH] hda/realtek: Add mic mute LED quirk for HP Laptop 15-fd0xxx

Quoted 8 lines

The HP Laptop 15-fd0xxx uses GPIO bit 0 to control the mic mute LED, but currently the quirk only enables the speaker mute LED (via coef bit). Switch to the existing ALC236_FIXUP_HP_MUTE_LED_MICMUTE_GPIO fixup which additionally registers a GPIO-based mic mute LED, mapping to the same verbs (SET_GPIO_DATA/SET_GPIO_DIRECTION bit 0) that the platform firmware uses.

Applied now. Thanks.

Takashi