Skip to contentSkip to conversation

selftests/bpf: Replace %pK output with 0

PATCH In review Sebastian Andrzej Siewior 3 participants 4 messages Sep 24

Subsystems (3)

v3 of 4 In review Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 selftests/bpf: Replace %pK output with 0

Networking used to print the socket pointer with %p as output in the /proc interface. This was later changed to %pK in order not to reveal the actual pointer value. The output format has then been copied to bpf tests which produce the same format including the %pK format modifier.

Networking recently replaced the socket output with a plain 0 because the socket pointer added no value to the output and the %pK should be removed from library handling. The format remained otherwise unchanged in order not to break any tools which are parsing this information.

This change removes the %pK modifier from bpf, following the change in networking.

---
The networking change is in net-next as commit 7c0ec6288b497 ("net:
Replace %pK output with 0")

The bots complain about "unchanged format" which is changed in terms of spacing. The order of printed items is unchanged.

v2…v3: https://lore.kernel.org/all/[email protected]/
- correct the subject line
- correct grammar error in the commit description
- Pickup a reviewed-by tag from Emil which was sent for v1

v1…v2: https://lore.kernel.org/all/[email protected]/
- sync dump_udp4(), dump_udp6() with net (0, spacing). The columns are (were) not aligned.
- Update comment in snprintf.c

 tools/testing/selftests/bpf/README.rst               |  2 +-
 tools/testing/selftests/bpf/prog_tests/snprintf.c    |  4 ++--
 tools/testing/selftests/bpf/progs/bpf_iter_netlink.c |  4 ++--
 tools/testing/selftests/bpf/progs/bpf_iter_tcp4.c    | 11 +++++------
 tools/testing/selftests/bpf/progs/bpf_iter_tcp6.c    | 11 +++++------
 tools/testing/selftests/bpf/progs/bpf_iter_udp4.c    |  4 ++--
 tools/testing/selftests/bpf/progs/bpf_iter_udp6.c    |  4 ++--
 tools/testing/selftests/bpf/progs/bpf_iter_unix.c    |  5 ++---
 tools/testing/selftests/bpf/progs/test_snprintf.c    |  4 ++--
 9 files changed, 23 insertions(+), 26 deletions(-)
tools/testing/selftests/bpf/README.rst +1 -1
index 07c834433b388..75ff1142c1857 100644
@@ -187,7 +187,7 @@ The symptom for ``bpf_iter/netlink`` looks like
   ...
   15: (bf) r2 = r7
   16: (0f) r2 += r1
-  ; BPF_SEQ_PRINTF(seq, "%pK %-3d ", s, s->sk_protocol);
+  ; BPF_SEQ_PRINTF(seq, "%p %-3d ", s, s->sk_protocol);
   17: (7b) *(u64 *)(r7 +0) = r2
   only read is supported
 
tools/testing/selftests/bpf/prog_tests/snprintf.c +2 -2
index 4e4a82d54f799..ccfb02bd4e7cd 100644
@@ -15,8 +15,8 @@
 #define EXP_SYM_OUT  "schedule schedule+0x0/"
 #define MIN_SYM_RET  sizeof(EXP_SYM_OUT)
 
-/* The third specifier, %p, is a hashed pointer which changes on every reboot */
-#define EXP_ADDR_OUT "0000000000000000 ffff00000add4e55 "
+/* The second specifier, %p, is a hashed pointer which changes on every reboot */
+#define EXP_ADDR_OUT "ffff00000add4e55 "
 #define EXP_ADDR_RET sizeof(EXP_ADDR_OUT "unknownhashedptr")
 
 #define EXP_STR_OUT  "str1         a  b c      d e longstr"
tools/testing/selftests/bpf/progs/bpf_iter_netlink.c +2 -2
index 00b2ceae81fb0..b9107d3ab6039 100644
@@ -25,12 +25,12 @@ int dump_netlink(struct bpf_iter__netlink *ctx)
 		return 0;
 
 	if (ctx->meta->seq_num == 0)
-		BPF_SEQ_PRINTF(seq, "sk               Eth Pid        Groups   "
+		BPF_SEQ_PRINTF(seq, "sk Eth Pid        Groups   "
 				    "Rmem     Wmem     Dump  Locks    Drops    "
 				    "Inode\n");
 
 	s = &nlk->sk;
-	BPF_SEQ_PRINTF(seq, "%pK %-3d ", s, s->sk_protocol);
+	BPF_SEQ_PRINTF(seq, "0  %-3d ", s->sk_protocol);
 
 	if (!nlk->groups)  {
 		group = 0;
tools/testing/selftests/bpf/progs/bpf_iter_tcp4.c +5 -6
index b1e509b231cd9..d149cf0d07be6 100644
@@ -131,8 +131,7 @@ static int dump_tcp_sock(struct seq_file *seq, struct tcp_sock *tp,
 		       icsk->icsk_probes_out,
 		       sock_i_ino(sp),
 		       sp->sk_refcnt.refs.counter);
-	BPF_SEQ_PRINTF(seq, "%pK %lu %lu %u %u %d\n",
-		       tp,
+	BPF_SEQ_PRINTF(seq, "0 %lu %lu %u %u %d\n",
 		       jiffies_to_clock_t(icsk->icsk_rto),
 		       jiffies_to_clock_t(icsk->icsk_ack.ato),
 		       (icsk->icsk_ack.quick << 1) | inet_csk_in_pingpong_mode(icsk),
@@ -161,10 +160,10 @@ static int dump_tw_sock(struct seq_file *seq, struct tcp_timewait_sock *ttw,
 	BPF_SEQ_PRINTF(seq, "%4d: %08X:%04X %08X:%04X ",
 		       seq_num, src, srcp, dest, destp);
 
-	BPF_SEQ_PRINTF(seq, "%02X %08X:%08X %02X:%08lX %08X %5d %8d %d %d %pK\n",
+	BPF_SEQ_PRINTF(seq, "%02X %08X:%08X %02X:%08lX %08X %5d %8d %d %d 0\n",
 		       tw->tw_substate, 0, 0,
 		       3, jiffies_delta_to_clock_t(delta), 0, 0, 0, 0,
-		       tw->tw_refcnt.refs.counter, tw);
+		       tw->tw_refcnt.refs.counter);
 
 	return 0;
 }
@@ -185,9 +184,9 @@ static int dump_req_sock(struct seq_file *seq, struct tcp_request_sock *treq,
 		       seq_num, irsk->ir_loc_addr,
 		       irsk->ir_num, irsk->ir_rmt_addr,
 		       bpf_ntohs(irsk->ir_rmt_port));
-	BPF_SEQ_PRINTF(seq, "%02X %08X:%08X %02X:%08lX %08X %5d %8d %d %d %pK\n",
+	BPF_SEQ_PRINTF(seq, "%02X %08X:%08X %02X:%08lX %08X %5d %8d %d %d 0\n",
 		       TCP_SYN_RECV, 0, 0, 1, jiffies_to_clock_t(ttd),
-		       req->num_timeout, uid, 0, 0, 0, req);
+		       req->num_timeout, uid, 0, 0, 0);
 
 	return 0;
 }
tools/testing/selftests/bpf/progs/bpf_iter_tcp6.c +5 -6
index dbc7166aee91f..cd65fa81f1219 100644
@@ -135,8 +135,7 @@ static int dump_tcp6_sock(struct seq_file *seq, struct tcp6_sock *tp,
 		       icsk->icsk_probes_out,
 		       sock_i_ino(sp),
 		       sp->sk_refcnt.refs.counter);
-	BPF_SEQ_PRINTF(seq, "%pK %lu %lu %u %u %d\n",
-		       tp,
+	BPF_SEQ_PRINTF(seq, "0 %lu %lu %u %u %d\n",
 		       jiffies_to_clock_t(icsk->icsk_rto),
 		       jiffies_to_clock_t(icsk->icsk_ack.ato),
 		       (icsk->icsk_ack.quick << 1) | inet_csk_in_pingpong_mode(icsk),
@@ -170,10 +169,10 @@ static int dump_tw_sock(struct seq_file *seq, struct tcp_timewait_sock *ttw,
 		       dest->s6_addr32[0], dest->s6_addr32[1],
 		       dest->s6_addr32[2], dest->s6_addr32[3], destp);
 
-	BPF_SEQ_PRINTF(seq, "%02X %08X:%08X %02X:%08lX %08X %5d %8d %d %d %pK\n",
+	BPF_SEQ_PRINTF(seq, "%02X %08X:%08X %02X:%08lX %08X %5d %8d %d %d 0\n",
 		       tw->tw_substate, 0, 0,
 		       3, jiffies_delta_to_clock_t(delta), 0, 0, 0, 0,
-		       tw->tw_refcnt.refs.counter, tw);
+		       tw->tw_refcnt.refs.counter);
 
 	return 0;
 }
@@ -201,9 +200,9 @@ static int dump_req_sock(struct seq_file *seq, struct tcp_request_sock *treq,
 		       dest->s6_addr32[0], dest->s6_addr32[1],
 		       dest->s6_addr32[2], dest->s6_addr32[3],
 		       bpf_ntohs(irsk->ir_rmt_port));
-	BPF_SEQ_PRINTF(seq, "%02X %08X:%08X %02X:%08lX %08X %5d %8d %d %d %pK\n",
+	BPF_SEQ_PRINTF(seq, "%02X %08X:%08X %02X:%08lX %08X %5d %8d %d %d 0\n",
 		       TCP_SYN_RECV, 0, 0, 1, jiffies_to_clock_t(ttd),
-		       req->num_timeout, uid, 0, 0, 0, req);
+		       req->num_timeout, uid, 0, 0, 0);
 
 	return 0;
 }
tools/testing/selftests/bpf/progs/bpf_iter_udp4.c +2 -2
index 23b2aa2604de2..d4079a619da66 100644
@@ -57,13 +57,13 @@ int dump_udp4(struct bpf_iter__udp *ctx)
 	BPF_SEQ_PRINTF(seq, "%5d: %08X:%04X %08X:%04X ",
 		       ctx->bucket, src, srcp, dest, destp);
 
-	BPF_SEQ_PRINTF(seq, "%02X %08X:%08X %02X:%08lX %08X %5u %8d %lu %d %pK %u\n",
+	BPF_SEQ_PRINTF(seq, "%02X %08X:%08X %02X:%08lX %08X %5u %8d %lu %d 0 %u\n",
 		       inet->sk.sk_state,
 		       inet->sk.sk_wmem_alloc.refs.counter - 1,
 		       rqueue,
 		       0, 0L, 0, ctx->uid, 0,
 		       sock_i_ino(&inet->sk),
-		       inet->sk.sk_refcnt.refs.counter, udp_sk,
+		       inet->sk.sk_refcnt.refs.counter,
 		       udp_sk->drop_counters.drops0.counter +
 		       udp_sk->drop_counters.drops1.counter);
 
tools/testing/selftests/bpf/progs/bpf_iter_udp6.c +2 -2
index c48b05aa2a4b2..dadc5f73ff098 100644
@@ -65,13 +65,13 @@ int dump_udp6(struct bpf_iter__udp *ctx)
 		       dest->s6_addr32[0], dest->s6_addr32[1],
 		       dest->s6_addr32[2], dest->s6_addr32[3], destp);
 
-	BPF_SEQ_PRINTF(seq, "%02X %08X:%08X %02X:%08lX %08X %5u %8d %lu %d %pK %u\n",
+	BPF_SEQ_PRINTF(seq, "%02X %08X:%08X %02X:%08lX %08X %5u %8d %lu %d 0 %u\n",
 		       inet->sk.sk_state,
 		       inet->sk.sk_wmem_alloc.refs.counter - 1,
 		       rqueue,
 		       0, 0L, 0, ctx->uid, 0,
 		       sock_i_ino(&inet->sk),
-		       inet->sk.sk_refcnt.refs.counter, udp_sk,
+		       inet->sk.sk_refcnt.refs.counter,
 		       udp_sk->drop_counters.drops0.counter +
 		       udp_sk->drop_counters.drops1.counter);
 	return 0;
tools/testing/selftests/bpf/progs/bpf_iter_unix.c +2 -3
index a2652c8c3616f..df3d971b21e8a 100644
@@ -42,10 +42,9 @@ int dump_unix(struct bpf_iter__unix *ctx)
 	seq = ctx->meta->seq;
 	seq_num = ctx->meta->seq_num;
 	if (seq_num == 0)
-		BPF_SEQ_PRINTF(seq, "Num               RefCount Protocol Flags    Type St    Inode Path\n");
+		BPF_SEQ_PRINTF(seq, "Num       RefCount Protocol Flags    Type St    Inode Path\n");
 
-	BPF_SEQ_PRINTF(seq, "%pK: %08X %08X %08X %04X %02X %8lu",
-		       unix_sk,
+	BPF_SEQ_PRINTF(seq, "%08u: %08X %08X %08X %04X %02X %8lu", 0,
 		       sk->sk_refcnt.refs.counter,
 		       0,
 		       sk->sk_state == TCP_LISTEN ? __SO_ACCEPTCON : 0,
tools/testing/selftests/bpf/progs/test_snprintf.c +2 -2
index 8fda075440235..48a0025cf2ca8 100644
@@ -57,8 +57,8 @@ int handler(const void *ctx)
 	sym_ret  = BPF_SNPRINTF(sym_out,  sizeof(sym_out), "%ps %pS %pB",
 				&schedule, &schedule, &schedule);
 	/* Kernel pointers */
-	addr_ret = BPF_SNPRINTF(addr_out, sizeof(addr_out), "%pK %px %p",
-				0, 0xFFFF00000ADD4E55, 0xFFFF00000ADD4E55);
+	addr_ret = BPF_SNPRINTF(addr_out, sizeof(addr_out), "%px %p",
+				0xFFFF00000ADD4E55, 0xFFFF00000ADD4E55);
 	/* Strings and single-byte character embedding */
 	str_ret  = BPF_SNPRINTF(str_out, sizeof(str_out), "%s % 9c %+2c %-3c %04c %0c %+05s",
 				str1, 'a', 'b', 'c', 'd', 'e', longstr);
Signature · 1 line
2.55.0
#1 lore raw
Quoted 4 lines · Sebastian Andrzej Siewior

v2…v3: https://lore.kernel.org/all/[email protected]/
- correct the subject line
- correct grammar error in the commit description
- Pickup a reviewed-by tag from Emil which was sent for v1

v2 was applied to bpf-next two days ago.
See commit 79dc258c9392 ("selftests/bpf: Replace %pK output with 0"). The code in v3 is the same. Nothing to apply.

#2 lore raw
Quoted 9 lines · Alexei Starovoitov
Quoted 4 lines · Sebastian Andrzej Siewior

v2…v3: https://lore.kernel.org/all/[email protected]/
- correct the subject line
- correct grammar error in the commit description
- Pickup a reviewed-by tag from Emil which was sent for v1

v2 was applied to bpf-next two days ago.
See commit 79dc258c9392 ("selftests/bpf: Replace %pK output with 0"). The code in v3 is the same. Nothing to apply.

Oh, thank you. I haven't seen a mail from the bot and the patch tracker said had "changes requested".

Sebastian

maintainer
#3 lore raw
In reply to Sebastian Andrzej Siewior

Hi Sebastian,

Quoted 10 lines · Sebastian Andrzej Siewior

Networking used to print the socket pointer with %p as output in the /proc interface. This was later changed to %pK in order not to reveal the actual pointer value. The output format has then been copied to bpf tests which produce the same format including the %pK format modifier.

Networking recently replaced the socket output with a plain 0 because the socket pointer added no value to the output and the %pK should be removed from library handling. The format remained otherwise unchanged in order not to break any tools which are parsing this information.

Quoted 5 lines

This change removes the %pK modifier from bpf, following the change in networking.

This change was already in the tree:

https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git/commit/?id=79dc258c9392051420a26f1504c647bd3d27c66a

Cheers,
Daniel