fs mounted twice, writing to wrong partition with 3ware escalade ide-raid
Hi,
i've got a problem on our new SMP machine with IDE-Raid and kernel 2.4.9 that's giving me a terrible headache.
Our configuration:
2 WD drives in the raid1 array
1 Maxtor drive on normal ide
mystery #1:
I can mount a ext2 filesystem twice without any errors. The two filesystems contain different data and changes to the second mount don't affect the first mount. Strange!
Here is a snippet from console with /dev/sda5 mounted twice:
/dev/sda5 / ext2 rw,usrquota,grpquota 0 0
none /proc proc rw 0 0/dev/sda7 /opt/root ext2 rw,usrquota,grpquota 0 0/dev/sda6 /var ext2 rw,usrquota,grpquota 0 0/dev/sda1 /boot ext2 rw 0 0
none /dev/pts devpts rw,gid=5,mode=620 0 0/dev/sda5 /mnt ext2 rw 0 0
a strace on the mount command shows that the syscall mount is executed w/o error.
mount("/dev/sda5", "/mnt/", "ext2", 0xc0ed0000, 0) = 0
As far as i know it should return EBUSY on a fs that is already mounted.
Second mystery:
the mounted /dev/hda3 contains the same data as /dev/sda5 and changes to one of them affect both partitions.
I'm not sure wether this is a kernel issue or a escalade firmware issue but perhaps one of you had that problem too and knows a solution.
Thank you
andreas
Signature · 6 lines
e-admin internet gmbh Andreas Gietl Roter-Brach-Weg 124a tel +49 941 3810884 fax +49 941 3810891 mobil +49 171 6070008
Quoted 6 lines · Andreas Gietl
a strace on the mount command shows that the syscall mount is executed w/o error.
mount("/dev/sda5", "/mnt/", "ext2", 0xc0ed0000, 0)= 0As far as i know it should return EBUSY on a fs that is already mounted.
No, it shouldn't. HOWEVER, trees should be in sync (actually, there's only one tree and only one superblock).
Quoted 4 lines
Second mystery:
the mounted
/dev/hda3contains the same data as/dev/sda5and changes to one of them affect both partitions.
Please, post your /proc/mounts. Results of ls -l /dev/hda3 /dev/sda5 would also be very interesting.