Skip to contentSkip to conversation

RME HDSP9652

DISCUSSION Justin Cormack 2 participants 3 messages Nov 27, 2002 – Nov 28, 2002

lore
Share & tools
lore
#0 lore raw

I have just got a couple of the new RME Hammerfall HDSP9652 cards, and find that they are not supported by the snd-hdsp driver yet. The card is basically the same hardware as the other hdsp cards but with the io integrated on the card.

I would guess that it will need a different firmware and another type in HDSP_Type, plus the channel info. Does anyone know how to get the formware from RME (who to contact)?

I will happily test any patches, or given the formware could prbbaly fix it...

Justin

-------------------------------------------------------
This SF.net email is sponsored by: Get the new Palm Tungsten T handheld. Power & Color in a compact size!
http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en

#1 lore raw
Quoted 10 lines · Justin Cormack

I have just got a couple of the new RME Hammerfall HDSP9652 cards, and find that they are not supported by the snd-hdsp driver yet. The card is basically the same hardware as the other hdsp cards but with the io integrated on the card.

I would guess that it will need a different firmware and another type in HDSP_Type, plus the channel info. Does anyone know how to get the formware from RME (who to contact)?

I just found the earlier message saying "It should work" ex the mixer. Well, it doesnt seem to, but which driver should work, the hdsp driver or rme9652?

-------------------------------------------------------
This SF.net email is sponsored by: Get the new Palm Tungsten T handheld. Power & Color in a compact size!
http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en

#2 lore raw
In reply to Justin Cormack
Quoted 8 lines

I have just got a couple of the new RME Hammerfall HDSP9652 cards, and find that they are not supported by the snd-hdsp driver yet. The card is basically the same hardware as the other hdsp cards but with the io integrated on the card.

I would guess that it will need a different firmware and another type in HDSP_Type, plus the channel info. Does anyone know how to get the formware from RME (who to contact)?

all i need is the PCI ID from you. i've already spoken to RME about the card, and the claim is that it will with the existing h-dsp driver. the only thing that won't work are the RMS meters. the existing driver, however, doesn't recognize the PCI ID and so it doesn't work.

--p

-------------------------------------------------------
This SF.net email is sponsored by: Get the new Palm Tungsten T handheld. Power & Color in a compact size!
http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en