Skip to contentSkip to conversation

MIDI and PCMCIA

DISCUSSION Giuliano Pochini 3 participants 6 messages Jun 14, 2003 – Jun 18, 2003

lore
Share & tools
lore
#0 lore raw

Some of the cards by Echoaudio have a midi port, but it's not MPC401 compatible. The card has two tiny buffers to send and receive bytes. Where can I get infos, sample code, etc. to add midi support to my driver ? The Layla24 also exists in PCMCIA edition. Just like above, I need docs... Tnx.

Signature · 9 lines
Bye.
   Giuliano.



-------------------------------------------------------
This SF.NET email is sponsored by: eBay
Great deals on office technology -- on eBay now! Click here:
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
#1 lore raw
Quoted 5 lines

Some of the cards by Echoaudio have a midi port, but it's not MPC401 compatible. The card has two tiny buffers to send and receive bytes. Where can I get infos, sample code, etc. to add midi support to my driver ? The Layla24 also exists in PCMCIA edition. Just like above, I need docs...

no docs explicitly, but the hdsp (as just one example; there are others within the driver tree) has a midi port that is completely unrelated to MPC401. it also uses a tasklet to handle midi i/o so as not to affect audio latency.

--p

-------------------------------------------------------
This SF.NET email is sponsored by: eBay
Great deals on office technology -- on eBay now! Click here:
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5

#2 lore raw
Quoted 10 lines · Paul Davis
Quoted 5 lines

Some of the cards by Echoaudio have a midi port, but it's not MPC401 compatible. The card has two tiny buffers to send and receive bytes. Where can I get infos, sample code, etc. to add midi support to my driver ? The Layla24 also exists in PCMCIA edition. Just like above, I need docs...

no docs explicitly, but the hdsp (as just one example; there are others within the driver tree) has a midi port that is completely unrelated to MPC401. it also uses a tasklet to handle midi i/o so as not to affect audio latency.

Tnx, the code seems quite clear.

And about the PCMCIA ?

Bye.

-------------------------------------------------------
This SF.Net email is sponsored by: INetU
Attention Web Developers & Consultants: Become An INetU Hosting Partner. Refer Dedicated Servers. We Manage Them. You Get 10% Monthly Commission! INetU Dedicated Managed Hosting http://www.inetu.net/partner/index.php

#3 lore raw

At 17 Jun 2003 22:59:43 +0000,

Quoted 8 lines · Giuliano Pochini
Quoted 5 lines · Paul Davis
Quoted 5 lines

Some of the cards by Echoaudio have a midi port, but it's not MPC401 compatible. The card has two tiny buffers to send and receive bytes. Where can I get infos, sample code, etc. to add midi support to my driver ? The Layla24 also exists in PCMCIA edition. Just like above, I need docs...

Quoted 8 lines
Quoted 4 lines

no docs explicitly, but the hdsp (as just one example; there are others within the driver tree) has a midi port that is completely unrelated to MPC401. it also uses a tasklet to handle midi i/o so as not to affect audio latency.

Tnx, the code seems quite clear.

And about the PCMCIA ?

if it's a cardbus, the driver will look just like a normal PCI driver. hdsp is a good example. it's based on the normal pci_driver struct. (although it has a xilinx firmware loading routine).

if it's a pccard, you'll need the entry code for cs, and will be a bit more complicated. take a look at vx-pocket drivers.

Takashi

-------------------------------------------------------
This SF.Net email is sponsored by: INetU
Attention Web Developers & Consultants: Become An INetU Hosting Partner. Refer Dedicated Servers. We Manage Them. You Get 10% Monthly Commission! INetU Dedicated Managed Hosting http://www.inetu.net/partner/index.php

#4 lore raw
Quoted 1 line

struct. (although it has a xilinx firmware loading routine).

just to make sure there is no misinformation going around: the "firmware" loaded by the hdsp driver has nothing to do with the xilinx fpga. its not even really "firmware" in the conventional sense. its actually configuration data for the i/o box attached to the pci/pcmcia card, and is written to the already running fpga, which passes it through/writes it to the i/o box. you can have a "running" hdsp card with no i/o box, but that's hardly what you'd call useful :)

--p

-------------------------------------------------------
This SF.Net email is sponsored by: INetU
Attention Web Developers & Consultants: Become An INetU Hosting Partner. Refer Dedicated Servers. We Manage Them. You Get 10% Monthly Commission! INetU Dedicated Managed Hosting http://www.inetu.net/partner/index.php

#5 lore raw

At Wed, 18 Jun 2003 07:34:42 -0400,

Quoted 10 lines · Paul Davis
Quoted 2 lines

struct. (although it has a xilinx firmware loading routine).

just to make sure there is no misinformation going around: the "firmware" loaded by the hdsp driver has nothing to do with the xilinx fpga. its not even really "firmware" in the conventional sense. its actually configuration data for the i/o box attached to the pci/pcmcia card, and is written to the already running fpga, which passes it through/writes it to the i/o box. you can have a "running" hdsp card with no i/o box, but that's hardly what you'd call useful :)

thanks for the clarification.

for more notes about xilinx chip: in the case of vx-pocket drivers, the xilinx chip works as a kind of boot-strapping. so, in this case, the firmware to start up the xilinx chip is necessary to make the main dsp chip accessible through it.

Takashi

-------------------------------------------------------
This SF.Net email is sponsored by: INetU
Attention Web Developers & Consultants: Become An INetU Hosting Partner. Refer Dedicated Servers. We Manage Them. You Get 10% Monthly Commission! INetU Dedicated Managed Hosting http://www.inetu.net/partner/index.php