Skip to contentSkip to conversation

RME Hammerfall HDSP 9652: no configurations available

DISCUSSION Anders Torger 3 participants 4 messages Jul 18, 2003 – Jul 19, 2003

lore
Share & tools
lore
#0 lore raw

I'm trying out the HDSP driver from CVS (checked out today), on a RME HDSP 9652 PCI card, but I don't manage to get it to run, with my basic test

# aplay -D hw -f S32_LE -c 26 -r 48000 /dev/zero

Playing raw data '/dev/zero' : Signed 32 bit Little Endian, Rate 48000 Hz, Channels 26
aplay: set_params:787: Broken configuration for this PCM: no configurations available

The firmware is loaded using hdsploader. Running aplay on another sound card on the machine works.

Any ideas why this happens? It seems like snd_pcm_hw_params_any returns no parameters at all. That is strange, since when I put in some debug logs in the driver it seems like the driver returns a proper parameters.

/Anders Torger

---------------

# cat /proc/asound/card0/hdsp

RME Hammerfall HDSP 9652 (Card #1)
Buffers: capture dea00000 playback de600000
IRQ: 20 Registers bus: 0xec000000 VM: 0xe0033000
Control register: 0x10080de
Control2 register: 0x800
Status register: 0x3c40008
Status2 register: 0xffff8061
FIFO status: 0
MIDI1 Output status: 0xffffff00
MIDI1 Input status: 0xffffff00
MIDI2 Output status: 0xffffff00
MIDI2 Input status: 0xffffff00

Buffer Size (Latency): 8192 samples (2 periods of 32768 bytes) Hardware pointer (frames): 0
Passthru: no
Line out: on
Firmware version: 1

Sample Clock Source: Internal 48 kHz
Preferred Sync Reference: ADAT1
AutoSync Reference: ADAT1
AutoSync Frequency: 48000
System Clock Mode: Master
System Clock Frequency: 48000

IEC958 input: Internal
IEC958 output: Coaxial only
IEC958 quality: Consumer
IEC958 emphasis: off
IEC958 NonAudio: off
IEC958 sample rate: Error flag set

ADAT1: Sync
ADAT2: No Lock
ADAT3: No Lock
SPDIF: No Lock
Word Clock: No Lock
ADAT Sync: No Lock

-------------------------------------------------------
This SF.net email is sponsored by: VM Ware
With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here: http://www.vmware.com/wl/offer/345/0

#1 lore raw
Quoted 7 lines

I'm trying out the HDSP driver from CVS (checked out today), on a RME HDSP 9652 PCI card, but I don't manage to get it to run, with my basic test

# aplay -D hw -f S32_LE -c 26 -r 48000 /dev/zero
Quoted 8 lines

Playing raw data '/dev/zero' : Signed 32 bit Little Endian, Rate 48000 Hz, Channels 26
aplay: set_params:787: Broken configuration for this PCM: no configurations available

The firmware is loaded using hdsploader. Running aplay on another sound card on the machine works.

Note you don't need to run hdsploader with hdsp9652 cards.

Quoted 7 lines

Any ideas why this happens? It seems like snd_pcm_hw_params_any returns no parameters at all. That is strange, since when I put in some debug logs in the driver it seems like the driver returns a proper parameters.

/Anders Torger

There was a problem with the number of channels in a recent driver version for hdsp9652 cards. It was fixed in cvs yesterday. Unfortunately sourceforge's cvs has a 24 hours delay for anonymous checkout. You can check the number of channels using alsamixer or amixer. If the number reported is 14 instead of 26, then you need to update your tree or manually apply the patch I posted on this list 2 days ago.

Thomas

-------------------------------------------------------
This SF.net email is sponsored by: VM Ware
With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here: http://www.vmware.com/wl/offer/345/0

#2 lore raw
Quoted 12 lines
Quoted 12 lines

I'm trying out the HDSP driver from CVS (checked out today), on a RME HDSP 9652 PCI card, but I don't manage to get it to run, with my basic test

# aplay -D hw -f S32_LE -c 26 -r 48000 /dev/zero

Playing raw data '/dev/zero' : Signed 32 bit Little Endian, Rate 48000 Hz, Channels 26
aplay: set_params:787: Broken configuration for this PCM: no configurations available

Quoted 5 lines
Quoted 3 lines

The firmware is loaded using hdsploader. Running aplay on another sound card on the machine works.

Note you don't need to run hdsploader with hdsp9652 cards.

why don't you just try it with plughw rather than hw. i'm not sure that what aplay tries to do with the configuration you've attempted to provide is actually correct.

-------------------------------------------------------
This SF.net email is sponsored by: VM Ware
With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here: http://www.vmware.com/wl/offer/345/0

#3 lore raw
Quoted 11 lines · Paul Davis
Quoted 11 lines
Quoted 11 lines

I'm trying out the HDSP driver from CVS (checked out today), on a RME HDSP 9652 PCI card, but I don't manage to get it to run, with my basic test

# aplay -D hw -f S32_LE -c 26 -r 48000 /dev/zero

Playing raw data '/dev/zero' : Signed 32 bit Little Endian, Rate 48000 Hz, Channels 26
aplay: set_params:787: Broken configuration for this PCM: no configurations available

Quoted 8 lines
Quoted 4 lines
Quoted 2 lines

The firmware is loaded using hdsploader. Running aplay on another sound card on the machine works.

Note you don't need to run hdsploader with hdsp9652 cards.

why don't you just try it with plughw rather than hw. i'm not sure that what aplay tries to do with the configuration you've attempted to provide is actually correct.

The problem was that the CVS was not properly updated yet with all patches (due to the 24 hour delay, which I did not know about :-\ ). Now it works, oh well, not with that configuration above, one has to tell aplay to run in non-interleaved mode, which unfortunately only can be done indirectly, by specifying separate files for each channel, so my basic test became:

aplay -D hw -I -f S32_LE -c 26 -r 48000 \
/dev/zero /dev/zero /dev/zero /dev/zero /dev/zero /dev/zero /dev/zero \
/dev/zero /dev/zero /dev/zero /dev/zero /dev/zero /dev/zero /dev/zero \
/dev/zero /dev/zero /dev/zero /dev/zero /dev/zero /dev/zero /dev/zero \
/dev/zero /dev/zero /dev/zero /dev/zero /dev/zero

which worked. I discovered an issue with AutoSync though, which is delivered in a separate mail.

I'm using hw directly by tradition I guess...

/Anders Torger

-------------------------------------------------------
This SF.net email is sponsored by: VM Ware
With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here: http://www.vmware.com/wl/offer/345/0