Skip to contentSkip to conversation

net/cs89x0: replace schedule_timeout() with msleep()

PATCH New [email protected] 1 participant 1 message Sep 1, 2004

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 4/16 net/cs89x0: replace schedule_timeout() with msleep()

I would appreciate any comments from the janitor@sternweltens list. This is one (of many) cases where I made a decision about replacing

set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(some_time);

with

msleep(jiffies_to_msecs(some_time));

msleep() is not exactly the same as the previous code, but I only did this replacement where I thought long delays were *desired*. If this is not the case here, then just disregard this patch.

Thanks,
Nish

Description: Replace schedule_timeout() with msleep() to guarantee the task delays for the desired time.

---

 linux-2.6.9-rc1-bk7-max/drivers/net/cs89x0.c |    3 +--
 1 files changed, 1 insertion(+), 2 deletions(-)
drivers/net/cs89x0.c renamed from drivers/net/cs89x0.c~msleep-drivers_net_cs89x0 +1 -2
diff -puN drivers/net/cs89x0.c~msleep-drivers_net_cs89x0 drivers/net/cs89x0.c
@@ -891,8 +891,7 @@ void  __init reset_chip(struct net_devic
 	writereg(dev, PP_SelfCTL, readreg(dev, PP_SelfCTL) | POWER_ON_RESET);
 
 	/* wait 30 ms */
-	current->state = TASK_INTERRUPTIBLE;
-	schedule_timeout(30*HZ/1000);
+	msleep(30);
 
 	if (lp->chip_type != CS8900) {
 		/* Hardware problem requires PNP registers to be reconfigured after a reset */

_