MIN/MAX in ide-timing.h

PATCH New [email protected] 1 participant 1 message Nov 20, 2004

lore

Share & tools

lore

[email protected]

author

2004-11-20 03:58 UTC #0 lore raw

PATCH 1/4 MIN/MAX in ide-timing.h

I replaced the custom MIN/MAX macros with the type safe min/max macros from linux/kernel.h.

Quoted 3 lines · Vojtech Pavlik

How about if you used the "min_t" and "max_t" macros inside FIT? That could help get rid of the casts completely (assuming the second and third parameters to FIT are expected to be constants).

Yes, that's better. It reduces the necessary changes to a minimum.

Signed-off-by Maximilian Attems <[email protected]>

---

 linux-2.6.10-rc2-bk4-max/drivers/ide/ide-timing.h |   25 ++++++++++------------
 1 files changed, 12 insertions(+), 13 deletions(-)

drivers/ide/ide-timing.h renamed from drivers/ide/ide-timing.h~min-max-ide_ide-timing.h +12 ~~-13~~

diff -puN drivers/ide/ide-timing.h~min-max-ide_ide-timing.h drivers/ide/ide-timing.h
@@ -27,6 +27,7 @@
  * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
  */
 
+#include <linux/kernel.h>
 #include <linux/hdreg.h>
 
 #define XFER_PIO_5		0x0d

@@ -96,11 +97,9 @@ static struct ide_timing ide_timing[] = 
 #define IDE_TIMING_UDMA		0x80
 #define IDE_TIMING_ALL		0xff
 
-#define MIN(a,b)	((a)<(b)?(a):(b))
-#define MAX(a,b)	((a)>(b)?(a):(b))
-#define FIT(v,min,max)	MAX(MIN(v,max),min)
-#define ENOUGH(v,unit)	(((v)-1)/(unit)+1)
-#define EZ(v,unit)	((v)?ENOUGH(v,unit):0)
+#define FIT(v,vmin,vmax)	max_t(short,min_t(short,v,vmax),vmin)
+#define ENOUGH(v,unit)		(((v)-1)/(unit)+1)
+#define EZ(v,unit)		((v)?ENOUGH(v,unit):0)
 
 #define XFER_MODE	0xf0
 #define XFER_UDMA_133	0x48

@@ -188,14 +187,14 @@ static void ide_timing_quantize(struct i
 
 static void ide_timing_merge(struct ide_timing *a, struct ide_timing *b, struct ide_timing *m, unsigned int what)
 {
-	if (what & IDE_TIMING_SETUP  ) m->setup   = MAX(a->setup,   b->setup);
-	if (what & IDE_TIMING_ACT8B  ) m->act8b   = MAX(a->act8b,   b->act8b);
-	if (what & IDE_TIMING_REC8B  ) m->rec8b   = MAX(a->rec8b,   b->rec8b);
-	if (what & IDE_TIMING_CYC8B  ) m->cyc8b   = MAX(a->cyc8b,   b->cyc8b);
-	if (what & IDE_TIMING_ACTIVE ) m->active  = MAX(a->active,  b->active);
-	if (what & IDE_TIMING_RECOVER) m->recover = MAX(a->recover, b->recover);
-	if (what & IDE_TIMING_CYCLE  ) m->cycle   = MAX(a->cycle,   b->cycle);
-	if (what & IDE_TIMING_UDMA   ) m->udma    = MAX(a->udma,    b->udma);
+	if (what & IDE_TIMING_SETUP  ) m->setup   = max(a->setup,   b->setup);
+	if (what & IDE_TIMING_ACT8B  ) m->act8b   = max(a->act8b,   b->act8b);
+	if (what & IDE_TIMING_REC8B  ) m->rec8b   = max(a->rec8b,   b->rec8b);
+	if (what & IDE_TIMING_CYC8B  ) m->cyc8b   = max(a->cyc8b,   b->cyc8b);
+	if (what & IDE_TIMING_ACTIVE ) m->active  = max(a->active,  b->active);
+	if (what & IDE_TIMING_RECOVER) m->recover = max(a->recover, b->recover);
+	if (what & IDE_TIMING_CYCLE  ) m->cycle   = max(a->cycle,   b->cycle);
+	if (what & IDE_TIMING_UDMA   ) m->udma    = max(a->udma,    b->udma);
 }
 
 static struct ide_timing* ide_timing_find_mode(short speed)