Skip to contentSkip to conversation

2.6.10 and .11 SCSI booting problems /w fusion card

DISCUSSION John Wigle 1 participant 1 message Mar 29, 2005

lore
Share & tools
lore

John Wigle

author
#0 lore raw

Sorry for posting the last email without a subject, I am just resending this one with a subject.

I am fairly new to the mailing list but have been playing around with kernels for awhile. I have successfully built 2.4 and 2.6 kernels on different types of remote servers but this latest problem has me stumped. The config I am using was working fine under 2.6.9 but 2.6.10 and 2.6.11 both are not able to boot up. I have posted the config at
http://eth0.us/?q=node/39 if anybody is interested to look. On boot I get the cannot mount /dev/sda3 every single time when trying with a kernel above 2.6.9.

I have tried with modules and without module support.

The problem comes from the following SCSI card in a dell poweredge server:
SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)

The driver that the 2.4 kernel uses is:
alias scsi_hostadapter mptscsih

Does anybody have any idea why this is happening or what can be done to get it to boot? I have tried to compile it on a many different servers with the same results. I have also asked a few people and they have not been able to get it working. Any ideas or pointers in the right direction are GREATLY appreciated! I have searched google but so far have found nothing useful.

--
Best regards,
John Wigle
"eth00"
http://eth0.us

--
Best regards,
John Wigle
"eth00"
http://eth0.us